ExtremeXOS Hardware/ Software Compatibility and Recommendation Matrices

Transcription

1 ExtremeXOS Hardware/ Software Compatibility and Recommendation Matrices Published August 2014

2 Copyright All rights reserved. Legal Notice Extreme Networks, Inc., on behalf of or through its wholly-owned subsidiary, Enterasys Networks, Inc., reserves the right to make changes in specifications and other information contained in this document and its website without prior notice. The reader should in all cases consult representatives of Extreme Networks to determine whether any such changes have been made. The hardware, firmware, software or any specifications described or referred to in this document are subject to change without notice. Trademarks Extreme Networks and the Extreme Networks logo are trademarks or registered trademarks of Extreme Networks, Inc. in the United States and/or other countries. All other names (including any product names) mentioned in this document are the property of their respective owners and may be trademarks or registered trademarks of their respective companies/owners. For additional information on Extreme Networks trademarks, please see: Support For product support, including documentation, visit: For information, contact: Extreme Networks, Inc. 145 Rio Robles San Jose, California USA

3 Table of Contents Preface...4 Audience... 4 Conventions...4 Related Publications...6 Providing Feedback to Us... 6 Chapter 1: ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices... 7 Component Support...7, +, and Q+ Support...17 XENPAK Module Support XFP Module Support CFP2 Module Support...36 Chapter 2: Release Recommendations...37 ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 3

4 Preface Audience This guide is intended for use by network administrators responsible for installing and setting up network equipment. It assumes a basic working knowledge of: Local area networks (LANs) Ethernet concepts Ethernet switching and bridging concepts Routing concepts Simple Network Management Protocol (SNMP) Basic equipment installation procedures See the ExtremeXOS Concepts Guide and the ExtremeXOS Command Reference Guide for information about configuring Extreme Networks Summit family switches. Note If the information in an installation note or release note shipped with your Extreme Networks equipment differs from the information in this guide, follow the installation or release note. Conventions This section discusses the conventions used in this guide. Text Conventions The following tables list text conventions that are used throughout this guide. Table 1: Notice Icons Icon Notice Type Alerts you to... Note Important features or instructions. Caution Risk of personal injury, system damage, or loss of data. ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 4

5 Preface Table 1: Notice Icons (continued) Icon Notice Type Alerts you to... Warning Risk of severe personal injury. New This command or section is new for this release. Table 2: Text Conventions Convention Screen displays Description This typeface indicates command syntax, or represents information as it appears on the screen. The words enter and type [Key] names Words in italicized type When you see the word enter in this guide, you must type something, and then press the Return or Enter key. Do not press the Return or Enter key when an instruction simply says type. Key names are written with brackets, such as [Return] or [Esc]. If you must press two or more keys simultaneously, the key names are linked with a plus sign (+). Example: Press [Ctrl]+[Alt]+[Del] Italics emphasize a point or denote new terms at the place where they are defined in the text. Italics are also used when referring to publication titles. Platform-Dependent Conventions Unless otherwise noted, all information applies to all platforms supported by ExtremeXOS software, which are the following: BlackDiamond X8 series switch BlackDiamond 8800 series switches Cell Site Routers (E4G-200 and E4G-400) Summit family switches SummitStack When a feature or feature implementation applies to specific platforms, the specific platform is noted in the heading for the section describing that implementation in the ExtremeXOS command documentation. In many cases, although the command is available on all platforms, each platform uses specific keywords. These keywords specific to each platform are shown in the Syntax Description and discussed in the Usage Guidelines. ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 5

6 Preface Terminology When features, functionality, or operation is specific to a switch family, the family name is used. Explanations about features and operations that are the same across all product families simply refer to the product as the switch. Related Publications Documentation for Extreme Networks products is available at: The following is a list of related publications currently available: ExtremeXOS User Guide ExtremeXOS Hardware and Software Compatibility Matrix ExtremeXOS Legacy CLI Quick Reference Guide ExtremeXOS ScreenPlay User Guide Using AVB with Extreme Switches BlackDiamond 8800 Series Switches Hardware Installation Guide BlackDiamond X8 Switch Hardware Installation Guide Extreme Networks Pluggable Interface Installation Guide Summit Family Switches Hardware Installation Guide Ridgeline Installation and Upgrade Guide Ridgeline Reference Guide SDN OpenFlow Implementation Guide SDN OpenStack Install Guide Some ExtremeXOS software files have been licensed under certain open source licenses. Information is available at: Providing Feedback to Us We are always striving to improve our documentation and help you work better, so we want to hear from you! We welcome all feedback but especially want to know about: Content errors or confusing or conflicting information. Ideas for improvements to our documentation so you can find the information you need faster. Broken links or usability issues. If you would like to provide feedback to the Extreme Networks Information Development team about this document, please contact us using our short online feedback form. You can also us directly at internalinfodev@extremenetworks.com. ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 6

7 1 ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices Component Support, +, and Q+ Support XENPAK Module Support XFP Module Support CFP2 Module Support This document provides information about the minimum version of ExtremeXOS software required to support BlackDiamond and Summit switches, E4G series routers, and pluggable interfaces such as, XENPAK, and XFP optical modules. For products no longer supported, this document also lists the highest version of ExtremeXOS software that can be installed. Component Support BlackDiamond Chassis and Modules Table 3: BlackDiamond 8800 Series Component Support BlackDiamond 8800 Series Component Minimum EXOS Software Minimum BootROM MSM x MSM-G8X x MSM-48c MSM G48T-e G24X-e MSM G24X-c G96T-c G48X-xl G48T-xl G8X-xl Last Supported EXOS Software ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 7

8 Table 3: BlackDiamond 8800 Series Component Support (continued) BlackDiamond 8800 Series Component Minimum EXOS Software G6X-xm Minimum BootROM G48T x G48Te x G48P x G48Pe x G48Ta x G48Xa x G48Tc G48Te G48Xc G24X x G24Xc S-G8Xc S-10G2Xc G4X x 10G4Xa x 10G4Ca x 10G4Xc G8Xc S-10G1Xc PSU Controller /1200 W AC PSU (Model # 60020/PS 2336) 600/900 W AC PSU (Model # 41050/PS 2431) (BlackDiamond 8806 only) 1200 W DC PSU (Model # 60021/PS 2350) N/A N/A N/A Last Supported EXOS Software Note Upgrading the BootROM on a BlackDiamond 8810 or BlackDiamond 8806 switch is not automatic when software is upgraded. The user must be running the minimum required BootROM version or later. Use the install firmware command after upgrading the EXOS image to ensure that the BootROM is at the latest level. ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 8

9 Table 4: BlackDiamond X8 Series Component Support BlackDiamond X8 Series Component Minimum EXOS Software BDX-MM BDXA-FM10T BDXA-FM20T BDXA-10G48X BDXA-40G12X BDXA-40G24X BDXA-10G48T BDXB-100G4X AC Power Supply (Model # 48011) N/A Minimum BootROM Table 5: BlackDiamond Series Component Support BlackDiamond Component Minimum EXOS Software Minimum BootROM MSM x MSM-1XL x 10G2H x 10G2X x 10G6X x G20X x G60T x G60X x PSU Controller N/A 700/1200 W AC PSU (Model # 60020/PS 2336) 1200 W DC PSU (Model # 60021/PS 2350) N/A N/A Last Supported EXOS Software Table 6: BlackDiamond modules with the Rev. D ASIC component support I/O Module 8000 Level Part No Level Part No. G60T after Rev after Rev. 03 Minimum EXOS Software x x Last Supported EXOS Software ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 9

10 Table 6: BlackDiamond modules with the Rev. D ASIC component support (continued) I/O Module 8000 Level Part No Level Part No. G60X G20X 10G2X after Rev after Rev after Rev after Rev after Rev after Rev G2H , after Rev G6X after Rev after Rev after Rev. 03 Minimum EXOS Software / x x x / x x / x / x x / x x Last Supported EXOS Software Table 7: BlackDiamond Series Component support BlackDiamond Series Component MSM-5 (BlackDiamond 12804) MSM-5 (BlackDiamond 12802) MSM-5R (BlackDiamond 12802) MSM-5R (BlackDiamond 12804) Minimum EXOS Software Minimum BootROM x x x x MSM-6R x XM-2X N/A 15.1.x XM-2HR N/A 15.1.x XM-2XR N/A 15.1.x GM-20T N/A 15.1.x GM-20XT N/A 15.1.x Last Supported EXOS Software ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 10

11 Table 7: BlackDiamond Series Component support (continued) BlackDiamond Series Component Minimum EXOS Software Minimum BootROM GM-20XTR N/A 15.1.x PSU Controller N/A 15.1.x 700/1200 W AC PSU (Model # 60020/PS 2336) 1200 W DC PSU (Model # 60021/PS 2350) N/A 15.1.x N/A 15.1.x Last Supported EXOS Software Table 8: BlackDiamond I/O Modules support BlackDiamond Series Component Minimum EXOS Software Firmware Required with EXOS GM-40X x HM-2X24GA x XM-8X x XFM-1 (shown as Fabric-1 through Fabric-5) (BlackDiamond 20808) XFM-2 (shown as Fabric-1 through Fabric-5) (BlackDiamond 20804) x x MM Basic x Fan Tray (BlackDiamond 20808) Fan Tray (BlackDiamond 20804) x x Last Supported EXOS Software Note Use the check firmware version command to verify that all components on the BlackDiamond series switches (I/O modules, fans, and so on) are running the latest version of EXOS firmware. If the command output shows that one or more components are not running the latest firmware, use the install firmware command to update all down level components. Be sure to run the show slot, show fans, show power, and show fabric commands to verify that all components are installed and operational before attempting to upgrade or downgrade the switch firmware. ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 11

12 Summit Series Switches and Components Table 9: Summit X150 Series Switches Component Support Summit X150 Series Component Minimum EXOS Software Minimum BootROM Summit X150-24t switch x Summit X150-48t switch x Summit X150-24p switch x Last Supported EXOS Software Table 10: Summit X250e Series Switches Component Support Summit X250e Series Component Minimum EXOS Software Minimum BootROM Summit X250e-24p switch x Summit X250e-48p switch x Summit X250e-24t switch x Summit X250e-48t switch x Summit X250e-24x switch x Summit X250e-24tDC switch Summit X250e-48tDC switch Summit X250e-24xDC switch x x x Last Supported EXOS Software Table 11: Summit X350 Series Switches Component Support Summit X350 Series Component Switch Model Minimum EXOS Software Minimum BootROM Summit X350-24t switch x Summit X350-48t switch x Option Cards XGM2-2bt N/A 15.3.x XGM2-2sf N/A 15.3.x XGM2-2xf N/A 15.3.x XGM2-2xn N/A 12.4.x Last Supported EXOS Software ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 12

13 Table 12: Summit X430 Series Switches Support Summit X430 Series Component Minimum EXOS Software Minimum BootROM X430-8p X430-24t X430-24p X430-48t Table 13: Summit X440 Series Switches Component Support Summit X440 Series Component Minimum EXOS Software Minimum BootROM Summit X440-8t switch Summit X440-8p switch Summit X440-24t switch Summit X440-24tDC switch Summit X440-L2-24t switch Summit X440-24p switch Summit X440-24x switch Summit X440-24t-10G switch Summit X440-24p-10G switch Summit X440-24x-10G switch Summit X440-48t switch Summit X440-48tDC switch Summit X440-L2-48t switch Summit X440-48p switch Summit X440-48t-10G switch Summit X440-48p-10G switch Table 14: Summit X450 Original Series Switches Component Support Summit X450 Series Component Summit X450 Series Summit X450-24x switch Summit X450-24t switch Option Cards Minimum EXOS Software Minimum BootROM x x XGM2-2xn N/A 12.4.x Last Supported EXOS Software ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 13

14 Table 15: Summit X450a and X450e Series Switches Component Support Summit X450a and X450e Series Component Summit X450a Series Summit X450a-48t switch Summit X450a-48tDC switch Summit X450a-24t switch Summit X450a-24tDC switch Summit X450a-24xDC switch Summit X450a-24x switch Summit X450e Series Summit X450e-24p switch Summit X450e-48p switch Summit X450e-24t switch Summit X450e-48t switch Option Cards Minimum EXOS Software Minimum BootROM x x x x x x x x x x XGM2-2bt N/A 15.3.x XGM2-2sf N/A 15.3.x XGM2-2xn N/A 12.4.x XGM2-2xf N/A 15.3.x Last Supported EXOS Software Table 16: Summit X460 Series Switches Component Support Summit X460 Series Component Minimum EXOS Software Minimum BootROM Switch Model Summit X460-24p switch Summit X460-24t switch Summit X460-24x switch Summit X460-48p switch Summit X460-48t switch Summit X460-48x switch ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 14

15 Table 16: Summit X460 Series Switches Component Support (continued) Summit X460 Series Component Minimum EXOS Software Minimum BootROM Stacking Modules SummitStack SummitStack-V Option Cards XGM3-2sf N/A XGM3S-2sf N/A XGM3S-2xf N/A XGM3SB-4sf N/A Table 17: Summit X480 Series Switches Component Support Summit X480 Series Component Switch Model Minimum EXOS Software Summit X480-24x switch Summit X480-48t switch Summit X480-48x switch Option Cards VIM2-10G4X N/A VIM2-SummitStack N/A VIM2-SummitStack N/A VIM2-SummitStack-V N/A VIM3-40G4x N/A Minimum BootROM Table 18: Summit X650 Series Switches Component Support Summit X650 Series Component Switch Model Minimum EXOS Software Minimum BootROM Summit X650-24t switch x Summit X650-24x switch x Option Cards VIM1-10G8X N/A VIM3-40G4x N/A VIM1-SummitStack N/A Last Supported EXOS Software ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 15

16 Table 18: Summit X650 Series Switches Component Support (continued) Summit X650 Series Component Minimum EXOS Software VIM1-SummitStack N/A VIM1-SummitStack N/A Minimum BootROM Last Supported EXOS Software Note Upgrading the BootROM on Summit family switches is not automatic when software is upgraded. You must be running the minimum required BootROM version. Use the download bootrom command to download a BootROM image. Table 19: Summit X670 Series Switches Component Support Summit X670 Series Component Manufacturing Part No. Minimum EXOS Software Switch Model Summit X670-48x switch Rev Rev Summit X670V-48x switch Rev Rev Summit X670-48t Rev Option Card VIM4-40G4X N/A N/A Minimum BootROM Table 20: Summit X770 Series Switches Component Support Summit X770 Series Component Switch Model Minimum EXOS Software Summit X770 switch Minimum BootROM E4G Series Routers and Components Table 21: E4G Series Routers Component Support E4G Series Component Minimum EXOS Software Minimum BootROM E4G-200 router E4G-200 CLK module N/A E4G-200 F16T1E1 module N/A E4G-400 router ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 16

17 Table 21: E4G Series Routers Component Support (continued) E4G Series Component Minimum EXOS Software Minimum BootROM E4G x router E4G x CLK module N/A E4G x F16T1E1 module N/A XGM3S-2xf option card N/A XGM3S-2sf option card N/A XGM3SB-4sf option card N/A E4G-B16T1E1 option card N/A, +, and Q+ Support Table 22: BlackDiamond 8800 Series Switches /+/Q+ Support LX LX Industrial Grade SX SX Industrial Grade ZX LX FX or (not supported in ) 1000BASE-T FX/1000LX BX /100/1000BASE-T copper /100/1000BASE-T copper Industrial Grade ER LR LRM SR ZR direct-attach passive copper cable 1 meter ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 17

18 Table 22: BlackDiamond 8800 Series Switches /+/Q+ Support (continued) 3 meters meters meters Q+ SR4 Q LR4 Q Q+ direct-attach passive copper cable 0.5 meter meter meters meters Q+-to-+ direct-attach fan-out passive copper cable 3 meters meters Q+ direct-attach active optical cable 10 meters meters meters Table 23: BlackDiamond X8 Series Switches /+/Q+/CFP2 Support LX LX Industrial Grade SX SX Industrial Grade ZX ZX Industrial Grade LX BX BX Industrial Grade /100/1000BASE-T copper /100/1000BASE-T copper Industrial Grade ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 18

19 Table 23: BlackDiamond X8 Series Switches /+/Q+/CFP2 Support (continued) + ER LR LRM SR ZR direct-attach passive copper cable 1 meter meters meters meters Q+ SR4 Q LR4 Q Q+ direct-attach passive copper cable 0.5 meter meter meters meters Q+-to-+ direct-attach fan-out passive copper cable 3 meters meters Q+ direct-attach active fiber cable 10 meters meters meters CFP2 SR10 CFP LR4 CFP ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 19

20 Table 24: BlackDiamond Series Switches /+ Support LX LX Industrial Grade LX SX SX Industrial Grade ZX ZX Industrial Grade BASE-T BX ZR Table 25: BlackDiamond Series Switches /+ Support LX LX Industrial Grade LX SX SX Industrial Grade ZX ZX Industrial Grade FX/1000LX BASE-T BX ZR Table 26: BlackDiamond Series Switches /+ Support LX LX Industrial Grade SX SX Industrial Grade ZX ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 20

21 Table 26: BlackDiamond Series Switches /+ Support (continued) ZX Industrial Grade LX FX/1000LX BASE-T BX ZR Table 27: BlackDiamond Series Switches /+ Support Optic LX LX Industrial Grade SX SX Industrial Grade ZX ZX Industrial Grade LX BX /100/1000BASE-T copper /100/1000BASE-T copper Industrial Grade ZR Table 28: Summit X150 Series Switches Support LX LX Industrial Grade SX SX Industrial Grade ZX ZX Industrial Grade LX BASE-BX ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 21

22 Table 28: Summit X150 Series Switches Support (continued) 100BASE LX BASE-FX for fast Ethernet ports (P/N 10067) BX Table 29: Summit X250e Series Switches Support LX LX Industrial Grade SX SX Industrial Grade ZX ZX Industrial Grade LX BASE-FX for fast Ethernet ports (P/N 10067) BASE BX BASE LX BASE BX Note The XGM2-2sf ports are 10-Gb + ports and do not support 1-Gb optics (PD ). Table 30: Summit X350 Series Switches /+ Support LX LX Industrial Grade SX SX Industrial Grade ZX ZX Industrial Grade LX FX (P/N 10063) BASE BX ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 22

23 Table 30: Summit X350 Series Switches /+ Support (continued) 10/100/1000BASE-T copper (not supported on combo ports) 10/100/1000BASE-T copper Industrial Grade (not supported on combo ports) + (XGM2-2sf option card required) ER LR SR LRM ZR direct-attach passive copper cable (XGM2-2sf option card required) 1 meter meters meters meters Table 31: Summit X430 Series Switches /+ Support Type LX LX Industrial Grade SX SX Industrial Grade ZX ZX Industrial Grade LX BASE BX BASE BX Industrial Grade BASE-FX for fast Ethernet ports (P/N10067) BASE-LX BASE BX /100/1000BASE-T copper (not supported on combo ports) 10/100/1000BASE-T copper Industrial Grade (not supported on combo ports) FX/1000LX (not supported on combo ports) ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 23

24 Table 32: Summit X440 Series Switches /+/Q+ Support Type LX LX Industrial Grade SX SX Industrial Grade ZX ZX Industrial Grade LX BASE BX (BX-D, BX-U) BASE BX Industrial Grade BASE-FX for fast Ethernet ports (P/N 10067) BASE-LX BASE BX (BX-D, BX-U) /100/1000BASE-T copper (not supported on combo ports) 10/100/1000BASE-T copper Industrial Grade (not supported on combo ports) FX/1000LX (not supported on combo ports) ER LR SR LRM ZR direct-attach passive copper cable 1 meter meters meters meters Note The XGM2-2sf ports are 10Gb + ports and do not support 1Gb optics (PD ) ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 24

25 Table 33: Summit X450a Series Switches /+ Support LX LX Industrial Grade SX SX Industrial Grade ZX LX FX (P/N 10063) FX/1000LX (Summit X450a-24x) BX /100/1000BASE-T copper (not supported on combo ports) 10/100/1000BASE-T copper Industrial Grade (not supported on combo ports) + (XGM2-2sf option card required) ER LR SR LRM ZR direct-attach passive copper cable (XGM2-2sf option card required) 1 meter meters meters meters Table 34: Summit X450e Series Switches /+ Support LX LX Industrial Grade SX SX Industrial Grade ZX LX ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 25

26 Table 34: Summit X450e Series Switches /+ Support (continued) 1000BX (XGM2-2sf option card required) ER LR SR LRM ZR direct-attach passive copper cable (XGM2-2sf option card required) 1 meter meters meters meters Table 35: Summit X460 Series Switches /+/Q+ Support LX LX Industrial Grade SX SX Industrial Grade ZX LX BASE-LX BX FX (P/N 10063) BX BASE-FX for fast Ethernet ports (P/N10067) FX/1000LX /100/1000BASE-T copper /100/1000BASE-T copper Industrial Grade (XGM3-2sf option card required) ER LR SR ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 26

27 Table 35: Summit X460 Series Switches /+/Q+ Support (continued) LRM ZR direct-attach passive copper cable (XGM3-2sf option card required) 1 meter meters meters meters Q+ (used for stacking with SummitStack-V80 option card) SR4 Q LR4 Q Q+ direct-attach active optical cable (used for stacking with SummitStack-V80 option card) 10 meters meters meters Table 36: Summit X480 Series Switches /+/Q+ Support LX LX Industrial Grade SX SX Industrial Grade ZX LX BASE-FX for fast Ethernet ports (P/N10067) BASE-LX BASE-FX BX FX/1000LX FX (P/N 10063) BX /100/1000BASE-T copper /100/1000BASE-T copper Industrial Grade ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 27

28 Table 36: Summit X480 Series Switches /+/Q+ Support (continued) ZR Q+ (used for stacking with VIM2-SummitStack-V80 module) SR4 Q LR4 Q Q+ (requires VIM3-40G4X SR4 Q LR4 Q Q+ direct-attach active optical cable (used for stacking with VIM2-SummitStack-V80 module) 10 meters meters meters Q+ direct-attach passive copper cable (used for stacking with VIM2-SummitStack-V80 module) 0.5 meters meter meters meter Q+-to-+ fan-out passive copper cable (requires VIM3-40G module) 3 meters meters Table 37: Summit 650 Series Switches /+/Q+ Support BX LX LX Industrial Grade SX SX Industrial Grade ZX LX /100/1000BASE-T copper 1000 speed support only 10/100/1000BASE-T copper Industrial Grade 1000 speed support only ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 28

29 Table 37: Summit 650 Series Switches /+/Q+ Support (continued) ER LR SR ZR + (VIM1 module ports 1 through 22) direct-attach passive copper cable 1 meter meters meters meters Q+ (requires VIM3-40G module) SR Q LR4 Q Q+ direct-attach active optical cable (used for stacking with VIM2-SummitStack-V80 module) 10 meters meters meters Q+ direct-attach passive copper cable (used for stacking with VIM2-SummitStack-V80 module) 0.5 meters meter meters meters Q+-to-+ fan-out passive copper cable (requires VIM3-40G module) 3 meters meters Table 38: Summit X670 Series Switches /+/Q+ Support LX LX Industrial Grade SX SX Industrial Grade ZX ZX Industrial Grade ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 29

30 Table 38: Summit X670 Series Switches /+/Q+ Support (continued) LX /100/1000BASE-T copper (except Summit X670V switch) /100/1000BASE-T copper Industrial Grade T Copper ER LR SR ZR LRM direct-attach passive copper cable 1 meter meters meters Table 39: Summit X670V Series Switches /+/Q+ Support LX LX Industrial Grade SX SX Industrial Grade ZX ZX Industrial Grade LX /100/1000BASE-T copper (except Summit X670V switch) /100/1000BASE-T copper (X670V switch) /100/1000BASE-T copper Industrial Grade T Copper ER LR SR ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 30

31 Table 39: Summit X670V Series Switches /+/Q+ Support (continued) ZR G LRM direct-attach passive copper cable 1 meter meters meters meters (X670V-48x only) Q+ (requires VIM4-40G module) SR4 Q LR4 Q Q+ direct-attach active optical cable (requires VIM4-40G module) 10 meters meters meters Q+-to-+ direct-attach fan-out passive copper cable (requires VIM4-40G module) 3 meters meters Q+ direct-attach passive copper cable (requires VIM4-40G module) 0.5 meter meter meters meter Table 40: Summit X770 Q+ Support Q+ SR4 Q LR4 Q Q+ direct-attach active optical cable 10 meters meters meters Q+-to-+ direct-attach fan-out passive copper cable 1 meter (26 AWG) ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 31

32 Table 40: Summit X770 Q+ Support (continued) 2 meters (26 AWG) Q+ direct-attach passive copper cable 0.5 meter meter meters (26 AWG) Table 41: Summit E4G Series Switches /+ Support LX LX Industrial Grade SX SX Industrial Grade ZX LX BASE-LX BX FX (P/N 10063)(not supported on E4G-400 combo ports) BX BASE-FX for fast Ethernet ports (P/N10067) FX/1000LX (not supported on E4G-400 combo ports) 10/100/1000BASE-T copper (not supported on E4G-400 combo ports) 10/100/1000BASE-T copper Industrial Grade (Not supported on E4G-400 combo ports) + (XGM3S-2sf or XGM3SB-4sf option card required) ER LR SR LRM ZR direct-attach passive copper cable (XGM3S-2sf or XGM3SB-4sf option card required) 1 meter meters ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 32

33 Table 41: Summit E4G Series Switches /+ Support (continued) 5 meters meters XENPAK Module Support Table 42: BlackDiamond Series Switches XENPAK Support XENPAK Module ER LR SR ZR LW LX Table 43: BlackDiamond Series Switches XENPAK Support XENPAK Module ER LR SR ZR LW LX Table 44: BlackDiamond Series Switches XENPAK Support XENPAK Module ER LR SR ZR LW LX ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 33

34 Table 45: Summit X350 Series Switches XENPAK Support XENPAK Module ER LR SR ZR LX Table 46: Summit X450a Series Switches XENPAK Support XENPAK Module ER LR SR ZR LW CX LX Table 47: Summit X450e Series Switches XENPAK Support XENPAK Module ER LR SR ZR CX LX Note XENPAKs not supplied by Extreme Networks will show up as Unsupported Optic Module in the show ports x:y information detail and show ports x:y configuration command output. ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 34

35 XFP Module Support Table 48: BlackDiamond 8800 Series Switches XFP Support XFP Module ER LR SR ZR Tunable DWDM (40 channels) Tunable DWDM (80 channels) Table 49: BlackDiamond Series Switches XFP Support XFP Module ER 12.2 LR 12.2 SR 12.2 ZR 12.2 Tunable DWDM (40 channels) Tunable DWDM (80 channels) Table 50: Summit X350 Series Switches XFP Support XFP Module ER LR SR ZR Table 51: Summit X450a and X450e Series Switches XFP Support XFP Module ER LR SR ZR ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 35

36 Table 52: Summit X460 Series Switches XFP Support XFP Module (requires XGM3S-2xf option card) ER LR SR ZR Tunable DWDM (up to 80 channels) Table 53: Summit X480 Series Switches XFP Support XFP Module ER LR SR ZR Tunable DWDM (40 channels) Tunable DWDM (80 channels) Table 54: E4G-400 Cell Site Aggregation Router XFP Support XFP Module (requires XGM3S-2xf option card) ER LR SR ZR Tunable DWDM (up to 80 channels) CFP2 Module Support Table 55: BlackDiamond X8 Series Switches CFP2 Support CFP2 Module SR LR ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 36

37 2 Release Recommendations The following table lists the recommended ExtremeXOS release and patch for each hardware platform. Table 56: Release Recommendations by Platform Platform Recommended Release Last Updated BD 8500-MSM24 EXOS patch Nov-13 BD12800 EXOS patch1-6 1-Apr-14 BD10800 EXOS patch1-6 1-Apr-14 BD20800 EXOS patch1-6 1-Apr-14 BDX8 EXOS patch-41 1-Aug-14 BD 8900-MSM128 EXOS patch Aug-14 BD 8800 MSM-48c EXOS patch-41 1-Aug-14 X150 EXOS patch1-3 1-Apr-14 X250 EXOS patch1-3 1-Apr-14 X350 EXOS patch1-3 1-Apr-14 X430 EXOS patch1-6 1-Apr-14 X440 EXOS patch Aug-14 X450 EXOS patch1-8 1-Apr-14 X450a EXOS patch1-3 1-Apr-14 X450e EXOS patch1-3 1-Apr-14 X460 EXOS patch-41 1-Aug-14 X480 EXOS patch-41 1-Aug-14 X650 EXOS patch-41 1-Aug-14 X670 EXOS patch Aug-14 X Dec-13 E4G-200 EXOS Apr-14 E4G-400 EXOS Apr-14 ExtremeXOS Hardware/Software Compatibility and Recommendation Matrices 37