HX9550R HIGH DENSITY SDH AND DACS MULTIPLEXER

Transcription

1 TDM SDH & PDH DACS HX9550R HIGH DENSITY SDH AND DACS MULTIPLEXER Features SDH ADM (Add and Drop Multiplexer) and TM (Terminal Multiplexer) up to 4 STM1/4 with full VC11/VC12/VC4 cross connect PDH DACS (Digital Access Crossconnect System) with full DS0 non blocking cross-connect with up to 252E1 or 336T1 Up to 64E1 or 36E1 tributaries ports Full modular system: - 2 slots controller CPU with SDH and DS0 cross-connect and 2 STM1/4 slots each controler, - 2 slots power supplies, - 4 mini slots - 12 for 5U or 3 slots for 3U Redundant CPU, power, E1 with hot swappable cards. SDH Protection for STM1/STM4 or OC3/OC12: MSP 1+1 with one or 2 CPU SNCP with one CPU SNCP and MSP (1+1) with 2 CPU E1/T1 Protection: 1+1 with adjacent card PDH ULSR E1 ring PDH SNCP 64K ring Circuit protection with external Y-Box Redundancy : Dual CPU & cross-connect Dual power supply Administration : Craft interface, Ethernet port and in-band over TDM DS0.and SDH EOC Over VT100 menu in Telnet or SSH, In SNMP with CXRview GUI or the NMS with full automatic commissioning CXR-iNMS ACCESS SDH& PDH MUX CROSS CONNECT HX9550R-3U HX9550R-5U The HX9550 SDH/SONET/PDH is a Multi-Service Access Platform with: High density TDM/PDH multiplexer DACS supporting voice, async and sync data, industrial copper and optical interfaces, G.SHDSL extension, dry contact and Ethernet EoPDH bridges/router interfaces An economical STM-1/4 (OC-3/12) access ADH ADM/TM multiplexer with full cross-connect with SDH link and local TDM/PDH interfaces TDMoE encapsulation and L2 GE switch card to transport TDM PseudoWire circuits over GE WAN together with local LAN This equipment is a combined equipment of the QX3440 DACS with same features and interfaces but in addition a large cross-connect DS0/E1/T1 to 4 STM1 or STM4 interfaces. The HX9550R series is particularly designed for the utilities (power companies, oil and gaz ), transportation, chemical industries to concentrate and to distribute mix flow of analogue/voice, low rate async / sync, contacts interfaces and Ethernet over STM1/4 optical link..

2 Page 2 ORDERING INFORMATION Chassis and cards Description Notes HX9550R-5U 5U 19 Main unit chassis without CPU, power, E1/T1 card, 128 Mbps tributaries Deliver with rack mount 19 and 23 HX9550R-3U 3U 19 Main unit chassis without CPU, power, E1/T1 card, 72 Mbps tributaries Deliver with rack mount 19 and 23 HX9550R-CPU-CC4-E1 CPU card with SDH VC4/VC12/VC11 and DS0 cross-connect, 2 slots for STM1/ STM1 (OC3/OC12) SFP Single controller card support MSP 1+1 or SNCP ring Dual controller cards support single SNCP ring and MSP for redundancy HX9550R-SW-4E1-RING E1 ring software 4E1 or 4FOM Software Option HX9550R-E1 HX9550R-T1 1 channel E1 interface, G703/G704/CAS 1 channel T1 interface, G703/G704/CAS HX9550R-MQE1-aa 4 channel E1 interface, G703/G704/CAS connector DB25, support ULSR-RING aa=75 delivered with cable 75ohms 8 BNC aa=120 with cable 120 RJ45M HX9550R-4E1FO-MM 4E1 Optical fiber interface, G703/G704/CAS/NonCAS, support ULSR-RING Multi-Mode 2 km HX9550R-4E1FO-SMxx 4E1 Optical fiber interface, G703/G704/CAS/NonCAS, support ULSR-RING Single Mode 20, 50, 100, 120 km HX9550R-RTA Bridge/Router interface: 2 Ethernet,64 WAN, maxi throughput 4Mbps 2 x 10/100BaseT HX9550-QFXO 4-channel FXO plug in module, w/600/900 impedance, Battery Reverse Mini slot 4 Mini slots available HX9550-QFXS 4-channel FXS plug in module, w/600/900 impedance, Battery Reverse, PLAR HX9550-2QEM-xx 4 channel 2W E&M plug in module HX9550-4QEM-xx 4 channel 4W E&M plug in module HX9550R-4E1-aa 4 channel E1 interface, G703/G704/CAS (support ULSR-RING with option) aa= 75ohms (2 BNC) or 120ohms (RJ45) HX9550R-3E1-aa 3 channel E1 interface, G703/G704/CAS support PDH-SNCP 64Kbps -RING aa= 75ohms (2 BNC) or 120ohms (RJ45) HX9550R-4T1 HX9550R-8G703-64K 4 channel T1 interface,, G703/G704/CAS 8 channel G703 interface at 64K data rate (J64) HX9550R-4GSH 4 channel GSHDSL modem 2 wires Remote modem MD42xx/MD44xx SH33xx and CopperLAN in 2 wire HX9550R-2GSH 2 channel GHDSL modem 2 or 4 wires HX9550R-8E&M 8 channel 2W/4W E&M plug in module HX9550R-12FXS 12-channel FXS plug in module, w/600/900 impedance, Battery Reverse, PLAR Without Ground start and metering pulse. HX9550R-12FXO 12-channel FXO plug in module, w/600/900 impedance, Battery Reverse HX9550R-12FXS-M 12-channel FXS plug in module, w/600/900 impedance, Battery Reverse, PLAR With metering pulse. HX9550R-12FXO-M 12-channel FXO plug in module, w/600/900 impedance, Battery Reverse HX9550R-SW8RT Bridge/Router with switch 8 ports 10/100BaseT switch,64 WAN Maxi throughput 8Mbps HX9550R-TOR-8I8O 8 channels Input and 8 channels output of Dry Relay contact HX9550R-8RS232-A 8 RS232 RJ45F Interface asynchronous HX9550R HX9550R-8RS232-A4S 8 RS232 (2 RJ45+ 2 DB44F) asynchronous and 4 synchronous for HX9550R Include 2 cables DB44M to 2 DB25F+ 1DB9F 1 slot Module 12 slots available HX9550R-8RS485 8 RS485/RS422 RJ45 asynchronous over sync oversampling HX9550-8RS485-TS-BUS HX9550R-BR-8RS232-RJ 8 RS232/RS422/RS485 asynchronous ( k ,4-57,6-115,2-128k) per oversampling DCE., Terminal server and Omnibus function. Bridge card with 8 RS232 RJ45F Interface asynchronous HX9550R HX9550R-TDMoE 4 E1 TDMoIP/CESoE/SAToPSN, 2 WAN Combo GE, 2 LAN GE, clock 10-7 For transport of payload. Support G.823 Traffic HX9550R-TDMoE-S 4 E1 TDMoIP/CESoE/SAToPSN, 2 WAN Combo GE, 2 LAN GE, clock 16 x 10-9 For transport of payload and synchronization. Support G.823 Traffic and Synchronization HX9550R-6X21-DB25 HX9550R-6V36-DB25 6-channel X21/V11, n 64k, w/ DB15 adaptor 6-channel V36/RS422/RS485/X21-V11/V36, n 64k, w/ DB25 connector HX9550R-24MAG-xx 24-channel Magneto plug in xx = 1G = L1 GND; 12 = L1 L2 2 slots Module HX9550R-24FXS 24-channel FXS plug in module, w/600/900 impedance, Battery Reverse, PLAR, w/ o Ground start and metering pulse. HX9550R-24FXO 24-channel FXO plug in module, w/600/900 impedance, Battery Reverse, w/o Ground start and metering pulse. Telco 50 points HX9550R-PW150 Power supply module -36 to -72V 150 Watt for HX9550R only Order 2 single DC for Dual DC application HX9550R-PW Power supply module -12 to -36V 150 Watt for HX9550R only * no support FXS HX9550R-S-PW48 Power supply module -36 to -72V 100 Watt for HX9550R-S only Order 2 single DC for Dual DC application HX9550R-S-PWAC Power supply module AC 110/230V 150 Watt for HX9550R-S only Only ONE AC power supply HX9550R-FAN 2 fan chassis 1 U Power supplied by QX chassis V.35 DB25 to M34F DTE Cable V.35 DB25 to M34M DCE Cable PW-230AC xx Power supply 230Vca to -48Vcc 150W Xx= Eur/UK/USA PROTEC-4E1 PROTEC-16E1 1 for 1 protection Y-Box with RJ48C connectors (4E1) 1 for 1 protection Y-Box with RJ48C connectors (16E1)

3 Page 3 HX9550R SDH SPECIFICATION Configuration > 2 STM-1/4 (OC-3/12) aggregate lines per CC4 card > 4 STM-1/4 (OC-3/12) with 2 CC4 per chassis > Use STP-STM1/4-MM or SMxx or CWDM or DWDM with DDM SDH capabilities: > Per chassis single STM-1/4 (OC-3/12) optical ring uplinks > One MSP (1+1) or SNCP for single controllers > Two MSP(1+1) or one MSP (1+1) and SNCP for dual controllers > Aggregate lines that are software configurable > SDH Cross-connect VC11/VC12/VC4 > Non-blocking cross-connect DS0= n 64 Kbps for 252E1 + 64E1 or 336T1 + 52T1 to for data and voice channel transmission for uplink site System Clock > SSM and CLK hold over function (SDH/SONET and E1/T1) > Clock Source Internal clock, 4 aggregate lines clocks (STM-1/4 (OC-3/12)) > External clocks: 2.048MHz or 2.048Mbps for STM-1/4, 1.544M bps for OC-3/12 SDH/SONET Line Alarm SDH Line PI-LOS RS-LOF RS-TIM MS-SD MS-SF MS-AIS MS-RDI MS-REI B1-BIP B2-BIP SDH Ho-Path AU-LOP AU-AIS HP-SD HP-SF HP-UNEQ HP-PLM HP-TIM HP-RED-P HP-RDI-S HP-RDI-C HP-LOM HP-REI SDH Lo-Path TU-LOP TU-AIS LP-SD LP-SF LP-UNEQ LP-PLM LP-TIM LP-RDI-P LP-RDI-S LP-RDI-C LP-REI LP-BIP SONET Line LOS-PI, LOF-S, TIM-S, SD-L, SF-L,AIS-L, RDI-L, REI-L UAS, B1-BIP, B2-BIP SONET STS-Path LOP-P, AIS-P, SD-P, SF-P, UNEQ-P, PLM-P, TIM-P, RDI-P-P, RDI-S-P, RDI-C-P, RDI-P-P, LOM-P, REI-P, B3-BIP-P SONET VT-Path LOP-V, AIS-V, SD-V, SF-V, UNEQ-V, PLM-V, TIM-V, RDI-P-V, RDI-S-V, RDI-C-V, REI-V, BIP-V Contains up to 300 alarm records of latest alarm types, alarm severity, date, and time. 64E1 or 52T1 drops in maximum 64E1 or 52T1 drops in maximum 64E1 or 52T1 drops in maximum STM-1/4 or OC- 3/12 HX9550-A HX9550-A HX9550-A MSP 1+1 STM-1/4 or OC-3/12 STM-1/4 or OC- 3/12 MSP 1+1 STM-1/4 or OC-3/12

4 Page 4 HX9550R E1, 3 AND 4 E1/T1 CARD SPECIFICATIONS Network Line Interface - E1, MQE1, 4E1 and 3E1 card Line Rate Mbps ± 50 ppm Framing ITU G.704 Line Code AMI or HDB3 BNC/RJ48C Input Signal ITU G.703 to -10dB Electrical 75 ohm Coax/120 ohm twisted pair Output Signal ITU G.703 Jitter ITU G.823 E1, MQE1, 4E1 & 3E1 cards support 1+1 protection 4E1, MQE1 and FO 4E1 cards support PDH ULSR protection 3E1 and future FO-3E1 support PDH SNCP 64K protection. Network Line Interface - T1 and 4T1 Line Rate Mbps ± 50 bps Output Signal DSX1 Line Code AMI or B8ZS Framing D4/ESF (selectable) Input Signal ABAM cable length up to 655 feet RJ48C Fiber Optical Interface 4 E1 or 4 T1 Source Wavelength Power Receiver Sensivity Data Rate Status report Management System gain Line code Detector type Fiber type Protection G703, G704, CAS or Non CAS LED or MLM Laser Multimode 1310 Singlemode /- 50 nm; /- 40 nm -26 or 8 dbm -38 dbm at BER < Mbps (4*2Mbps) Card type, loopback, LOS Remote management via EOC channel 30 db Scrambled NRZ PIN-FET SC/PC or FC/PC PDH ULSR optical ring HX9550R-4E1FO-MM HX9550R-4E1FO-SM30-SC HX9550R-4E1FO-SM50-SC HX9550R-4E1FO-SM30-FC HX9550R-4E1FO-SM20/15 HX9550R-4E1FO-SM100 HX9550R-4E1FO-SM30W13 HX9550R-4E1FO-SM30W15 4 E1 Fibre Optic dual fibre MM dBm for 2km, mini slot, SC/PC 4 E1 Fibre Optic dual fibre SM dBm for 30km, mini slot, SC/PC 4 E1 Fibre Optic dual fibre SM dBm for 50km, mini slot, SC/PC 4 E1 Fibre Optic dual fibre SM dBm for 30km, mini slot, FC/PC 4 E1 Fibre Optic dual fibre SM dBm for 20km, mini slot, SC/PC 4 E1 Fibre Optic dual fibre SM dBm for 100km, mini slot,sc/pc 4 E1 Fibre Optic single fibre SM 1310 WDM 20dBm for 30km, mini slot, please use face to a HX9550R-4E1FO-SM30-W15, SC/PC 4 E1 Fibre Optic single fibre SM 1550 WDM 20dBm for 30km, mini slot, please use face to a HX9550R-4E1FO-SM30-W15, SC/PC Co-directional Interface Interface Line Distance Loopack C37.94 Interface Source Wavelength Optical Budget ITU G Kbps co-directional interface 120ohm, RJ48 Up to 500 meters DTE Payload Loopback, Local Loopback LED 820nm 2Km reach ST/PC 50 µ core/9.6 db; 62.5 µ core/ 15db

5 Page 5 HX9550R SERIAL INTERFACES - PRODUCT SPECIFICATIONS G.SHDSL Line Interface > Up to twelve 4-port G.SHDSL cards. > Up to six cards with line power option, as the line power cards use two plug-in slots. > Full duplex with adaptive echo cancellation GSHDSL line coding. > Unconditioned AWG twisted pair. > Line rate: 272, 400, 528, 784, 1168, 1552, 2064 for data rates n x 64 Kbps. Compatible with CopperLAN, MD42xx and SH3312 in 2 wire mode and SH3314 in 4 wire mode DTE Interface (V.35) > Data Port Up to six 6-port DTE V.35 cards or 1 port > Data Rate n x 64 Kbps > DB25F (optional conversion cable DB25S to M34 connector) DTE Interface (V.36) > Data Port Up to six 6-port DTE V36 cards or 1 port > Data Rate n x 64 Kbps, support asynchronous with over sampling > DB25F (optional conversion cable DB25S to M34 connector) DTE Interface (X21) > Data Port Up to six 6-port DTE X21/V11 cards or 1 port > Data Rate n x 64 Kbps > DB15F DTE Interface (RS232-X.50 mux.), 8 ports card asynchronous HX9550R-8RS232-A > Data Port Up to twelve 8-ports RS232 cards with X.50 plug-in, subrate, with subrate mux > Modes Asynchronous, Asynchronous in Mux X50 mode, Sync Oversampling > 8 RJ45 DTE Interface (RS232-X.50 mux.), 8 ports card: 8 asynchronous and 4 synchronous HX9550R-8RS232-A4S > Data Port Up to twelve 8-ports RS232 cards with X.50 plug-in, subrate, with subrate mux > 2 RJ DB44F with 2 cable DB44M to 2 DB25F and 1 DB9F DTE Interface RS485/RS422, 8 ports card asynchronous HX9550R-8RS485 > Data Port Up to twelve 8-asynchronoud ports RS485/RS232/RS422 cards > 8 RJ45 DTE Interface RS485/RS422, 8 ports card asynchronous HX9550R-8RS485-TS-BUS > Data Port Up to twelve 8-asynchronoud ports RS485/RS232/RS422 cards > 8 RJ45 > Asynchrous mode ( k ,4-57,6-115,2-128k) par oversampling DCE en RJ45 pour HX9550, > Terminal server founction > Omnibus, supports DNP3 and Modbus protocols DTE Interface (Data Bridge Card) 8 ports RS232 asynchronous Multipoint > Data Port Up to twelve 8-port data bridge card (each card supports up to 120 DS0 for data bridge) > Feature 20 end points per multi-drop circuit to into a logical ended 56K or 64K channel Per port supports bridge function to N remote Trib. Site (N=1~20) > Data Rate Asynchronous, supports 1200 to bps asynchronous data via oversampling channel Bridge function one port with one DS-0 to many (Maximum is 20 for remote Tributary data box ) 20 drops for each DS0 to remote Tributary data box and 8 ports RS232 shared the 128 channels. Dry Contact interface card: 2 versions HX9550R-TOR-8I-8O and HX9550R-TOR-8I-8O-HV Dry Contact Outputs 8 pairs per card with screw Insulation resistance 100M ohms. Support Normal Closed/Open, Max Current 5A, maxi voltage 100Vdc or 250Vac (HX9550R-TOR-8I-8O version) Max Current 2A, maxi voltage 220Vdc or 250Vac (HX9550R-TOR-8I-8O-HV version) Dry Contact mode: IP-Mode Collect data and send alarm to console ou TRAP to SNMP/CXRview over CPU IP-Mode Received order from console or SNMP/CXRview over CPU TDM-Mode transmit dry contact change over E1. Use 1 TS for 1 port or 4 contacts Dry Contact Inputs 8 pairs per card : 2 port of 4 pairs, 2 RJ45 Internal resistance: Standard version 1K and -HV version 100K 3mA for current activation, 1,5mA for current deactivation, maxi 4mA

6 Page 6 HX9550R VOICE INTERFACES - PRODUCT SPECIFICATIONS Voice Card (8 E&M and 4&M for HX9550RS only) Alarm Conditioning Encoding Impedance Longitudinal Rejection Longitudinal Max Loss Adjustment Gain Adjustment Signal/Distortion Frequency Response Signaling RJ45 connector CGA busy after 2.5 seconds of LOS, LOF A-law or µ-law, user selectable together for all Balanced 600 or 900 ohms 55 db 2.5 volts peak AC 0, 3, 6, or 9 db transmit & receive 7 to -16 db transmit & receive > 46dB with 1004 Hz, 0dBm input to -1 db from 300 to 3400 Hz Type 1, Type 2, Type 3, Type 4, and Type 5, A side and B side All in-band signaling tones are carried transparently by the digitizing process. Customer is responsible for in-band signaling compatibility between a telephone and a switch, or between a PBX and a switch. E&M Signaling bits E&M M - Tx E - Rx NOTE: * = Don't care. A B C D A B C D Normal IDLE - ON HOOK * * ACTIVE - OFF HOOK * * A-Bit Invert IDLE - ON HOOK * * ACTIVE - OFF HOOK * * Voice Card (12 FXS, 12 FXO, 24 FXS, 24 FXO, QFXS, QFXO) RJ11, Telco50 for 24 ports Alarm Conditioning CGA busy after 2.5 seconds of LOS, LOF Encoding A-law or µ-law, user selectable together for all Impedance Balanced 600 or 900 ohms (selectable together for all) Longitudinal Rejection 55 db Longitudinal Max 2.5 volts peak AC Loss Adjustment 7 to -16 db / 0.5 step transmit & receive Signal/ Distortion > 46dB with 1004 Hz, 0dBm input Frequency Response to -1 db from 300 to 3400 Hz FXS Loop Feed Nominal - 48Vdc with 10mA current limit FXO Ringing REN 0.1B (AC) FXS Ringing 1REN at 5K meters per port 16.5Hz, 20Hz, 25Hz, 50Hz, user selectable for all 86 v rms (sine wave), 2 sec on 4 sec off, or 1 sec on 2 sec off optional for PLAR Signaling Metering pulse 12KHz, 16KHz, Metering level 0dBm, -24dBm Signaling Bit Programable All in-band signaling tones are carried transparently by the digitizing process. All in-band signaling tones are carried transparently by the digitizing process. Customer is responsible for in-band signaling compatibility between a telephone and a switch, or between a PBX and a switch. Signaling bits FXS/FXO FXS FXO NOTE 1: * = Don t care. Tx Rx NOTE 2: INVERT means the 0 PLAR OFF/ON PLAR OFF PLAR ON Tx Rx &1 of the A-Bit are inverted. A B C D A B C D A B C D A B C D A B C D Normal ON HOOK * * * OFF HOOK * * A-Bit Invert ON HOOK * * * OFF HOOK * * Normal NO RING * 1 * * 0 * * * * RING 0 0 * * 1 1 * * * A-Bit Invert NO RING * 1 * * 1 * * * * RING 0 0 * * 0 1 * * * Normal Battery * * * 0 * * * 0 * * * 0 Reverse Battery * * * 1 * * * 1 * * * 1

7 Page 7 HX9550R ROUTER/BRIDGE, TS AND TDMOE CARDS Router/Bridge (1 mini slot) Number of ports 2 LAN ports, 64 WAN from 1 to 32 IT Interface Function Routing Protocol VLAN Protocols Rates per WAN 2 * 10/100BaseT 2 RJ45 One Bridge and Router Static, RIP-I, RIP-II, OSPF Transparent au VLAN or Tagging or VLAN mapping per IT TCP/IP, PPP, MLPPP, HDLC,HDLC Cisco, Frame Relay n* 64K channelized over E1/T1 up to 2Mbps Up to 4Mbps in MLPPP Function Server et Relay DHCP, QoS Protocol Rapid Spanning Tree Protocoles 802.1w Security NAT, NAPT, Firewall Management Over the HX9550R or IN-Band over 1 TS or over Ethernet Router/Bridge with 8ports Swich (1 slot) Number de ports Interface Function Routing Protocol VLAN Protocol Rates per WAN Function 8 ports LAN, 64 WAN de 1 à 32 IT 8 * 10/100BaseT 8 RJ45 One bridge, Router, Switch Static, RIP-I, RIP-II, OSPF Transparent au VLAN or Tagging or Mapping the VLAN per IT TCP/IP, PPP, MLPPP, HDLC,HDLC Cisco, Frame Relay n* 64K channelized over E1/T1 up to 2Mbps Up to 8Mbps in MLPPP Server et Relay DHCP, QoS Protocol Rapid Spanning Tree Protocoles 802.1w Security Management NAT, NAPT, Firewall Terminal Server Interface(1 mini slot) over HX9550R ou In-Band over 1 TS or over Ethernet One DB-44 conversion cable to one DB-9 and two DB-25 connectors Ports One Async RS232 port, two Async/Sync RS232 ports. The two Async/Sync ports can be configured independently Data Rate Async: 1.2kbps, 2.4kbps, 4.8kbps, 9.6kbps, 19.2kbps, 38.4kbps Sync: 64 kbps Layer 2 Protocol of RS232 Async raw data Layer 2 Protocol of RS232 Sync PPP Terminal Server Function Supports Telnet Router Function RIP-I, RIP-II, Static Route TDMoE PseudoWire emulation(1 slot) Please read the dedicate documentation WAN 2 Combo Gigabit Ethernet(GbE) Interface LAN 2 RJ45 10/100/1000 BaseT port PseudoWire Mode CESoPSN, SAToP and AAL1 (TDMoPSN) 256 bundle with protection, mini 1 TS maxi 2Mbps TDM capacity 4 E1 of backplane card. Packet Delay Variation: Unframed T1 up to 340 ms, Framed T1: Up to 256 ms E1:up to 256 ms, Framed T1 with CAS: Up to 192 ms Packet transparency support for all types of packet types including IEEE 802.1q VLAN and 802.1ad (Q-in-Q)

8 Page 8 HX9550R SYSTEM - PRODUCT SPECIFICATIONS Physical /Electrical HX9550R-5U HX9550R-3U SDH Number of SFP 4 STM1 or STM4 4 STM1 or STM4 Nb of SNCP ring 1 1 Multiplexer Cross-Connect E1 252 E1 +64E1 252 E1 +36E1 Nb long slots 12 5 Nb mini slots 4 4 Max E1 tributaries Max T1 tributaries Dimensions HX9550R-5U is 5U x 223 x 220 mm (W x H x D) HX9550R-3U is a 3U x 132 x 224 mm (W x H x D) Power HX9550R-5U Single or Dual -48V DC (-36 to 72V), 150 Watts max. Single or Dual 24V DC (-12 to 36V), 150 Watts max. Mix not permitted Single or Dual 150V DC 150 Watts max. Mix not permitted HX9550R-3U Single or Dual -48V DC (-36 to 72V) 100 Watts max Single 110/230V AC 150 Watts max Weight HX9550R-5U : 7kg HX9550R-3U : 5kg (Chassis only) Temperature -5 to 55 C Humidity 0-95%RH (non-condensing) Mounting Line Power Supply Desk-top stackable, 19 /23 rack mountable (For G.SHDSL card only) Available only with DC power. (For G.SHDSL card only) 60 ma constant current source, selectable peak voltage of 190 Vdc Clock Source Internal, E1/T1 Line, SSM modes, External E1 or T1 depending on CPU model, no SSM on external. Alarm Relay Alarm Relay, Fuse alarm, and performance alarm, maxi current 1A at 24Vdc and 0.625A at 48Vdc System Configuration Parameters Active Configuration, Stored Configuration, and Default Configuration (Stored in Non-volatile Memory) Supervisor RS232, VT100 - front panel 10/100 Base-T, Ethernet on CPU front panel In-band 64 Kbps in HDLC/PPP Telnet, SSH v2, SNMP v1 and v3 Performance Monitor Performance Registers Separate Registers Performance Reports Alarm Queue Threshold Last 24 hours performance in 15 minutes interval and last 7 days in 24 hours summary 12 MDSL ports, network, user, and remote site Reports include MDSL port unsync Date & Time, Errored Second, Unavailable Second, E1 Bursty Errored Second, Severe Errored Second, Degraded Minutes, and Controlled Slip Second. Also available in Statistics (%). Containing 40 alarm records which record the latest alarm type, location, and date & time Bursty Seconds, Severely Errored Second, Degraded Minutes Diagnostics Test Line Loopback Test Pattern Certifications HX9550R-5U HX9550R-3U Compliance E1/T1 interface (Line Loopback, Payload Loopback, Local Loopback) GSHDSL interface (Payload Loopback, Local loopback) E1/T1 interface (215-1 PRBS, 3-in-24, 1-in-8, 2-in-8, 1:1 patterns) GSHDSL/DTE interface (211-1 BERT) EN55022 Class A, EN50024, FCC Part 15 Class A, FCC Part 68, CS-03, IEC60950, UL60950, IEC , IEEE 1613 IEC and IEEE1613: with -48Vdc(150W) power module, w/o Magneto card EN55022 Class A, EN50024, EN , FCC Part 15 Class A, FCC Part 68, CS-03, IEC , EN IEC and IEEE1613: with -48Vdc(150W) power module, w/o Magneto card ITU G.703, G.704, G.706, G.732, G.736, G.823, G.826, G.711, G.712, G.775, O.151, V.11, V.28, V.54 IETF SNMP v.3 (RFC2571~2575)

9 Page 9 APPLICATION & PROTECTION 1+1

10 Page 10 PDH-ULSR RING PROTECTION PDH ULSR Ring protection for E1 or n x E1 This protection is working with framed E1 and will protect a full E1 or several E1 in parallel and in Ring infrastructure. This mode of protection is supported by the 4E1, MQE1 and Fiber-optic QE1 card only but only with HX9550R equipment, even E1 can be forward over any E1 PDH/SDH equipment over a clear channel transmission. The transmission is Unidirectional, then the Working path is using the one direction of the E1 ring pipe and the Protection path will use the reverse direction or the codirectional pair of the E1 pipe when the ring will be cut. TS can be dropped and inserted at any node of the ring to create several point to point connection of x TS. The E1 ULSR ring can transport maximum 31 point to point links over the ring. The switching of the protection is based on LOF, LOS, AIS or the bad quality signal. A ULSR ring with QX3440/HX9550R can support several E1 rings protection, but each HX9550R of this ring can also support other rings with other HX9550R independently. CAPABILITIES Use one E1 with protection in co-directional path Up to 16 E1 ring per chassis Use 4E1, mini 4 E1 and mini 4 E1 over fiber Recovery time of full traffic <250ms Recommended number of nodes per ring 15 Drop insert of voice, data, Ethernet over PDH traffic

11 Page 11 PDH APPLICATION SNCP-64K ILLUSTRATION PROTECTION PDH SCNP protection for TS (64K) or n x TS This protection mode is working with framed signal and will protect independently one TS (64kbps) or n TS. This SNCP protection is based on Ring infrastructure. This protection is supported by the 3E1 and a future Fiber-optic 3E1 cards only. This mode of protection can work with QX3440, HX9500R and HX9550R, but the E1 links can be forwarded over any PDH or SDH equipment in clear channel transmission. The PDH SNCP protection can be set with Unidirectional or Bidirectional transmission. The Working traffic and Protection traffic are always transmitted together over an E1 working path and an E1 protection path. In case of interruption of the Working path the concerned HX9550R will generate AIS-TS in each protected TS, to order the switch on both end of the SNCP pipe. This protection is very efficient and is avoiding the loss of data. The HX9550R can support many TS ring protection between the same HX9550R or with other HX9550R toward different directions by using sometime the same E1 for some section of the rings. Smart Solutions for Smart Networks CXR Anderson Jacobson Rue de l'ornette Abondant - France T +33 (0) F +33 (0) contact@cxr.com

12