ebridge200b - Managed Two Port Transceiver Board

Transcription

1 PLUS ebridge200b - Managed Two Pt Transceiver Board Installation Guide Rev Overview: ebridge200b long range Ethernet transceiver/media converter transmits data and power over Coax CAT5 cable over distances that are 3 to 5 times greater than standard Ethernet. Upgrading existing Coax analog camera infrastructure to IP cameras is greatly simplified as well. Two cameras/devices can be attached. ebridge200b suppts, + a single Hi- (60W) device. ebridge200b offers built-in IP management which allows f remote camera reset, moniting, and repting via various IP protocols. There is no need to install remote AC mains power since these devices are simply powered from the low voltage midspan/endspan equipment, such as Altronix NetWay midspans ebridge00. Note: F ethernet maximum distance see Maximum Length of Coax Type vs. Camera Power/ Class, pg. 4. Features: : Environmental: See input options table below. Operating Temperature: Power Output: 60W over CAT5: -40ºC to 75ºC (-40ºF to 67ºF). 2 pts /+ (30W) per pt pt Hi- (60W). 60W over Coax: -40ºC to 65ºC (-40ºF to 49ºF). Total output power: 60W. 45W over Coax: -40ºC to 75ºC (-40ºF to 67ºF). Ethernet: Relative humidity: 20 to 85%, non-condensing. Link Distance: 500m max. (with Pace ebridge00 Stage Temperature: -40º to 75ºC (-40º to 67ºF). series receivers to ebridge200b) Applications: 00m (with standard midspan endspan to Long range CAT5 Coax /+/Hi-. ebridge200b). Retrofit digital IP cameras in an analog CCTV installation Connectivity: RJ45, auto-crossover. (up to two (2) IP cameras expansion per analog camera). Wire type: 4-pair CAT5 better structured cable. Wks with Megapixel, HD720, HD080, and VGA Device Distance: 00m max. (SD) cameras (see note, pg. 2). (ebridge200b to camera/device). Upgrade deployed CCTV Coax to a digital netwk Speed: 00BaseT, full duplex, auto negotiation. in Retail, Hospitality, Arenas, Casinos, Airpts, Coax: Schools, Hospitals, Transptation, etc. Link Distance: 300m max. Mechanical: Connectivity: BNC, RG-59/U similar. Dimensions (H x W x D approx.): Speed: 00BaseT, full duplex, auto negotiation x 5 x (8.2mm x 27mm x 25.4mm). Indicats: Speed and Activity of Output pts. ON the Spare Pair of CAT5 ON the Data Pair of CAT5. Power Options and Switch Setting: Receiver Link CAT5 Wiring Configuration Switch Setting Power Distance Endspan 30W 2 pair 00m PacePRM, 4PRM, 8PRM 6PRM 30W Provided over 2 pair/2 pair on CAT5e 500m PacePRD* 60W Provided over 4 pair on CAT5e 500m ebridge00** 60W m ebridge00rm, 400PCRM, 800PCRM 600RM 30W m NetWayD*** 60W Provided over 4 pair on CAT5e 00m * When used with NetWayD. ** Use with UL Listed Class 2 limited power source (such as NetWayD). *** Carefully observe crect polarity when using non-altronix product W + 30W

2 Installation Instructions: Wiring methods shall be in accdance with the National Electrical Code/NFPA 70/ANSI, and with all local codes and authities having jurisdiction. Wiring should be UL Listed and/ Recognized wire suitable f the application.. Mount ebridge200b in desired enclosure location using included hardware. 2. Connect Coax from ebridge/00 (60W), ebridge00rm, ebridge400pcrm, ebridge800pcrm ebridge600pcrm (60W) receiver to connect marked [] (Fig. 4, pg. 3). Connect CAT5 from PacePRD (60W), PacePRM, Pace4PRM, Pace8PRM Pace6PRM (30W) receiver, NetWayD Endspan (30W) connect marked [] (Fig. 4, pg. 4) 3. Select input power on switch marked [, ] Fig. (refer to Power Options and Switch Settings on pg., Fig., pg. 2). 4. Connect structured cable from one () 60W camera/device to RJ45 jack marked [Pt ] connect two (2) individual structured cables from two (2) 30W cameras/devices to RJ45 jacks marked [Pt ], [Pt 2] (Fig. 4, pg. 3). Note: ebridge200b is designed to accommodate Megapixel, HD720, HD080 and VGA (SD) cameras. It is imptant to note that some high resolution and high frame rate cameras may demand faster headend processing ability, such as a PC graphics card to present a quality image. If the headend processing equipment is insufficient in speed, the image may show pixelation and latency. It is advisable to pretest system if unsure. Alternatively, frame rate and resolution may be reduced to accommodate system equipment. Reset Facty Settings:. Power the unit down by removing coax CAT5e wire from input. 2. Depress and hold down Reset button (Fig. 2) while reconnecting coax CAT5e wire to input. 3. The Heartbeat to the left of the Reset button (Fig. 2) will flash twice indicating unit is reset to facty default. Fig. 2 SW Parameter Connections power requirements Indicats Environmental Conditions Weights (approx.) Technical Specifications: Description BNC f Coax link. RJ45 f ethernet link. UL Listed LPS Power Supply. See input options table pg.. Speed and Activity of Output pts. ON the Spare Pair of CAT5. ON the Data Pair of CAT5. Operating Ambient Temperature: UL W over CAT5: -40ºC to 75ºC (-40ºF to 67ºF). 60W over Coax: -40ºC to 65ºC (-40ºF to 49ºF). 45W over Coax: -40ºC to 75ºC (-40ºF to 67ºF). Relative humidity: 20 to 85%, non-condensing. Stage Temperature: -40ºC to 75ºC (-40ºF to 67ºF). Operating Altitude: -,000 to 6, ft. ( to 2,000m). Product: 0.35 lbs. (0.6 kg) Shipping: lbs. (0.45 kg) ebridge200b

3 Coax : 5-56VDC Class 2 LPS power supply Blue Coax link status (SLOC) RJ45 s Yellow - Speed, Green - Activity Green Power and I.T.E. 43KC I.T.E. 43KC RJ45 Z409 Z Fig. 3 60W Coax Applications: Option Option 2 60W Camera/Device ebridge00 NetWayD ebridge00 - Receiver Provides 56VDC IN Aux ON 0/00 Base-T Coax SLOC Link DC Power Power Coax - 300m Fig. 4 Option 30W Coax Applications: Option 2 ebridge00rm ebridge00rm EoC Receiver passes /+ RJ45 s Yellow - Speed Green - Activity Yellow Power and Endspan Coax - 300m ebridge200b - 3 -

4 I.T.E. 43KC UTP Link I.T.E. 43KC Z409 RJ45 Link Z409 Output Fig. 5 Option 5W Coax Applications: ebridge00rm Coax ebridge00rm EoC Receiver passes /+ RJ45 s Yellow - Speed Green - Activity Yellow Power and RJ45 Endspan Coax - 300m 5e Application: Fig. 6 - Data/Power Transmission from Headend up to 500m over CAT5e Option Option 2 Cat5e - 00m Cat5e - 00m + Camera/Device 60W Camera/Device Cat5e - 00m PacePRD NetWayD + Camera/Device PacePRD - Receiver IP-UTP Receiver Passes /+ RJ45 s Yellow - Activity Green - Speed Green Power and IN Aux ON Cat5e - 500m 5e Application: Fig. 7 - Data/Power Transmission from Headend up to 00m over CAT5e Option Option 2 Cat5e - 00m Cat5e - 00m + Camera/Device 60W Camera/Device Cat5e - 00m NetWayD + Camera/Device IN Aux ON Cat5e - 00m ebridge200b

5 Z409 Z409 Fig. 8 - Data/Power Transmission from Headend up to 500m over CAT5e Option 5e Application: Option 2 PacePRM Endspan Cat5e - 500m Fig. 9 - Data/Power Transmission from Headend up to 00m over CAT5e Option 5e Application: Option 2 Endspan Cat5e - 00m 5W CAT5e Application: Fig. 0 - Data/Power Transmission from Headend up to 500m over CAT5e Option PacePRM Endspan Cat5e - 500m ebridge200b - 5 -

6 5W CAT5e Application: Fig. - Data/Power Transmission from Headend up to 00m over CAT5e Option Endspan Cat5e - 00m Cable, Device Power, Data, and Distance: Cable Type Total Power Max. Data Max. Power Consumption Distance Distance RG59u/23awg 5W 300m 264m RG59u/23awg 30W 300m 32m RG59u/23awg 60W 300m 66m RG59u/22awg 5W 300m 334m RG59u/22awg 30W 300m 67m RG59u/22awg 60W 300m 83m RG59u/20awg 5W 300m 532m RG59u/20awg 30W 300m 266m RG59u/20awg 60W 300m 33m RG59u/8awg 5W 300m 846m RG59u/8awg 30W 300m 423m RG59u/8awg 60W 300m 2m CAT5e 5W 500m 846m CAT5e 30W 500m 423m CAT5e 60W 500m 2m Note: Calculations based off of 56VDC starting voltage from power source and accounts f a 0VDC voltage drop. IEEE standards voltage range requirement f powered devices are: (5W): 37VDC to 57VDC + (30W): 44VDC to 57VDC ebridge200b

7 eflow200b Drawing and Dimensions: 7.25 x 5 x (8.2mm x 27mm x 25.4mm) PORT PORT 2 USB 6.25" (58.8mm) 6.7" (70.2mm) 7.25" (8.2mm) 3.7" (94mm) 4.25" (08mm) 5" (27mm) ebridge200b - 7 -

8 Notes: Altronix is not responsible f any typographical errs th Street, Brooklyn, New Yk 220 USA fax: website: info@altronix.com Lifetime Warranty Made in U.S.A. IIeBridge200B D9Q MEMBER ebridge200b