AL168 Series Multi-Output Power Supplies

Transcription

1 AL168 Series Multi- Power Supplies Installation Guide Models Include: AL168CB - 6A (100VA) or 5.5A (100VA). AL168175CB - 10A (175VA). AL168300CB - 18A (350VA) or 16A (350VA). AL168300CBM - 18A (350VA) or 16A (350VA). AL168600CB - 40A (700VA) or 36A (700VA). Rev

2 Overview: AL168CB Series Multi- Power Supplies provide 16VAC/18VAC distributed via eight (8) auto-resettable PTC protected outputs for powering multiple security system or access control panels. Eight (8) AL168 Reference Chart: Altronix Model Number Voltage Total Current (A) Number of PTC Protected s Current (max per output) Main Fuse Ratings on Board 115VAC 50/60Hz Input Current AL168CB 16VAC 6A 18VAC 5.5A 10A/250V 0.9A AL168175CB 16VAC 10A 15A/250V 1.45A AL168300CB 16VAC 18A 2.5A 18VAC 16A 8 AL168300CBM 16VAC 18A 18VAC 16A 15A/32V 2.7A AL168600CB 16VAC 40A Two (2) 6A 18VAC 36A 15A/32V 5.4A Specifications: Surge suppression. AC power LED indicator. Illuminated power disconnect circuit breaker with manual reset (except AL168CB). Unit maintains camera synchronization. Ease of installation saves time and eliminates costly labor. Spare fuses included. Enclosure Dimensions (H x W x D): AL168CB: 8.5 x 7.5 x 3.5 (215.9mm x 190.5mm x 88.9mm) AL168175CB and AL168300CBM: 8.5 x 7.5 x 3.75 (215.9mm x 190.5mm x 95.25mm) AL168300CB and AL168600CB: 13.5 x 13 x 3.25 (342.9mm x 330.2mm x 82.55mm) Installation Instructions: 1. Mount unit in the desired location. Mark and predrill holes in the wall to line up with the top two keyholes in the enclosure. Install two upper fasteners and screws in the wall with the screw heads protruding. Place the enclosure s upper keyholes over the two upper screws, level and secure. Mark the position of the lower two holes. Remove the enclosure. Drill the lower holes and install the three fasteners. Place the enclosure s upper keyholes over the two upper screws. Install the two lower screws and make sure to tighten all screws (Enclosure Dimensions, pg. 7). Secure enclosure to earth ground. 2. Turn OFF main switch (except AL168CB) (Figs. 2-5, pgs. 4-6). 3. All units are factory set for 16VAC operation. For 18VAC operation adjust unit prior to mounting and applying power as follows: Change the wire position so that the black wire [18V] is connected to the terminal marked [P] and the yellow wire [16V] is connected to the terminal marked [S]. 4. Connect AC power to the black and white flying leads of the transformer(s) (Figs. 1-5, pgs. 4-6). Use 18 AWG or larger for all power connections. 5. Measure output voltage before connecting devices. This helps avoiding potential damage. Terminals marked [1P] - [8P] are positive of the same polarity. CAUTION: Determine the maximum operating voltage of the equipment being powered before adjusting the output voltage. 6. Connect devices to terminals marked [1P] - [1N] through [4P] - [4N] on PD4/PD4CB board (Figs. 3 and 5, pgs. 5-6) or terminals marked [1P] - [1N] through [8P] - [8N] on PD8/PD8CB board (Figs. 1, 2, and 4, pgs. 4-5), carefully observing polarity. 7. Turn main switch to the RESET (ON) position (except AL168CB) (Figs. 3-5, pgs. 5-6). 8. Green LED will illuminate when unit is powered. 9. Upon completion of the wiring secure enclosure door with screws (supplied). Caution: Equipment to be installed/serviced by authorized/trained personnel only. Shut branch circuit power before installing/servicing equipment AL168 Series

3 WARNING: To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture. This installation should be made by qualified service personnel and should conform to the National Electrical Code and all local codes. Terminal Identification: PD4/PD4CB/PD8/PD8CB - Power Distribution Module Terminal Legend Function/Description 1P - 4P, 1P - 8P AC output. 1N - 4N, 1N - 8N AC output. LED Diagnostics: PD4/PD4CB/PD8/PD8CB - Power Distribution Module Green (AC) Power Distribution Module Status ON Normal operating condition. OFF No Power. The lightning flash with arrow head symbol within an equilateral triangle is intended to alert the user to the presence of an insulated DANGEROUS VOLTAGE within the product s enclosure that may be of sufficient magnitude to constitute an electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION: To reduce the risk of electric shock do not open enclosure. There are no user serviceable parts inside. Refer servicing to qualified service personnel. AL168 Series - 3 -

4 Fig. 1 - AL168CB 16VAC or 18VAC circuit breakered output 1 (Follow same procedure using terminals 2P & N through 8P & N circuit breakered outputs 2 through 8) 115VAC input 50/60 Hz, White Black XFMR Fig. 2 - AL168175CB Back Panel of Enclosure F1 F2 F3 F4 F5 F6 F7 F8 MAIN FUSE P FUSED POWER OUTPUTS D1 R1 LED N COMMON POWER OUTPUTS Power Switch 16VAC fused output 1 (Follow same procedure using terminals 2P & N through 8P & N fused outputs 2 through 8) 115VAC Input 50/60 Hz Black White XFMR AL168 Series

5 Fig. 3 - AL168300CB 1P, 2P, 3P, 4P = FUSED OUTPUTS 1N, 2N, 3N, 4N = COMMON OUTPUTS 1P 1N 2P 2N 3P 3N 4P 4N LED Power Switch Voltage Selection Configuration 16VAC (Yellow) (Black) 115VAC input, 50/60 Hz. Black White XFMR* 18VAC (Black) (Yellow) Fig. 4 - AL168300CBM Power Switch MAIN FUSE Transformer underneath power supply board F1 F2 F3 F4 F5 F6 F7 F8 Black White AL168 Series - 5 -

6 Fig. 5 - AL168600CB Power Switch 115VAC input, 50/60 Hz. Black White XFMR* XFMR* Voltage Selection Configuration 16VAC (Yellow) (Black) 18VAC (Black) (Yellow) AL168 Series

7 AL168CB 8.5 x 7.5 x 3.5 (215.9mm x 190.5mm x 88.9mm) Enclosure Dimensions (H x W x D approximate): 7.25 (184.15mm) (184.15mm) 3.5 (88.9mm) 6.05 (153.67mm) 2 (50.8mm) (28.575mm) (28.575mm) 2 (50.8mm) ( mm) 6.05 (153.67mm) 3.5 (88.9mm) 5.25 (133.35mm) AL168300CBM and AL168175CB 8.5 x 7.5 x 3.75 (215.9mm x 190.5mm x 95.25mm) 3.63 (92.2mm) 3.85 (97.79mm) 7.25 (184.15mm) 0.9 (22.86mm) 0.9 (22.86mm) 8.13 (206.5mm) 8.13 (206.5mm) 1.75 (44.45mm) 3.85 (97.79mm) 3.85 (97.79mm) 7.25 (184.15mm) AL168 Series - 7 -

8 AL168300CB and AL168600CB: 13.5 x 13 x 3.25 (342.9mm x 330.2mm x 82.55mm) 1.40 (36mm) 4.85 (123mm) 4.85 (123mm) 1.40 (36mm) 1.20 (31mm) 3.25 (83mm) 1.20 (31mm) 0.75 (19mm) 12.5 (318mm) 11.0 (279mm) 0.75 (19mm) 1.20 (31mm) 1.40 (36mm) (24mm) 1.40 (36mm) 5.10 (130mm) 5.10 (130mm) 13.0 (330mm) 5.10 (130mm) (167mm) (24mm) 3.25 (83mm) 3.25 (83mm) 3.25 (83mm) 1.0 (25mm) 1.0 (25mm) 1.0 (25mm) 10.5 (267mm) 1.0 (25mm) Altronix is not responsible for any typographical errors th Street, Brooklyn, New York USA phone: fax: web site: info@altronix.com Lifetime Warranty Made in U.S.A. IIAL168Series E02Q MEMBER AL168 Series