L03ESDL5V0CG3-2 SOT-523. STAND-OFF VOLTAGE Volts POWER DISSIPATION - 30 WATTS GENERAL DESCRIPTION FEATURES APPLICATION MECHANICAL DATA
|
|
- Ashley Bryan
- 5 years ago
- Views:
Transcription
1 LITE-ON SEMICONDUCTOR BIDIRECTIONAL ESD PROTECTION DIODE STAND-OFF VOLTAGE Volts POWER DISSIPATION - 0 WATTS GENERAL DESCRIPTION The is designed to protect sensitive electronics from damage or latch up due to ESD, lightning, and other voltage induced transient events. The device will protect two line operating at 5.0 volts. FEATURES Bi-directional ESD Protection of two line. Max. peak pulse power : Ppp = 0W at tp = 8/0 us IEC , level 4 (ESD), > 5KV (air); > 8KV (contact). IEC , Ipp = A at tp = 8/0 us. APPLICATION Computers and peripherals Communication system Audio & video equipment Portable lnstrumentation MECHANICAL DATA Case Material: "Green" molding compound UL flammability classification 94V-0 (No Br.Sb, Cl) Terminals: Lead Free Plating (Matte Tin Finish) Component in accordance to RoHs 0/65/EU SOT-5 SOT-5 DIM. MIN. MAX. A A A b b c D E E e 0.5 Typ e L All Dimensions in millimeter PIN A SSIGNMENT, Input Lines Ground & Orientation MAXIMUM RATINGS (Tj= 5 unless otherwise noticed) Rating Symbol Value Unit Peak pulse Power ( 8/0us Waveform ) PPPM 0 W Peak Pulse Current ( 8/0us Waveform ) IPP A Operating Junction Temperature Range TJ -55 to + 05 Storage Temperature Range Tstg -55 to + 50 Soldering Temperature, t max = 0s TL 60 ELECTRICAL CHARACTERISTICS (Tj= 5 unless otherwise noticed) Parameter Symbol Conditions MIn Max Unit Reverse standoff voltage VDRM V Reverse leakage current IRM VDRM = 5 V na Breakdown voltage VBR IR = ma V Junction capacitance(each l/o pin and ground) CJ VR = 0 V, f = MHz pf Clamping voltage VCL IPP = A ( 8/0us ) --- V Clamping voltage VCL IPP = A ( 8/0us ) V REV., Mar-07, KSIR6
2 RATING AND CHARACTERISTIC CURVES Figure. 8/0 us pulse waveform according to IEC Figure. ESD pulse waveform according to IEC Peak Pulse Power (W) 0 Ppp/Ppp (5 ) TJ =5, tp (us) = 8/0 us exponentially decay waveform Pulse Time (us) Figure. Power Dissipation versus Pulse Time Junction Temperature ( ) Figure 4. Peak pulse power versus TJ 5 4 TJ =5, f=mhz, Vosc=00mV Capacitance (pf) IR/IR(5 ).0 0 Any I/O pin to Reverse Voltage (V) Junction Temperature ( ) Figure 5. Capactiance versus Reverse Voltage Figure 6. Reverse Leakage Current versus TJ
3 RATING AND CHARACTERISTIC CURVES I/O +/-8KV ESD Contact discharge V (i/o) Figure 7. ESD Test Configuration Figure 8. Clamped +8 kv ESD voltage waveform Figure 9. Clamped -8 kv ESD voltage waveform
4 Application Information Data Line Connector I/O I/O Signal Line Figure 0. Computers, Peripherals, and Communication System ESD Protection Audio CODEC Audio-R Audio-L 4 I/O I/O PHONE JACK Video Signal - RCA JACK I/O I/O Video Signal - RCA JACK Figure. Audio and Video Equipment ESD Protection Data Line Power Line Connector I/O I/O L0ESDL5V0CC- Controller Figure. Portable Instrumentation ESD Protection
5 Legal Disclaimer Notice Marking & Orientation Packaging Information DEVICE Q'TY/REEL (PCS) REEL DIA. (INCH) Q'TY/BOX (PCS) Q'TY/CARTON (PCS) K SOT-5 Soldering Pad Layout
6 Legal Disclaimer Notice Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.
L05ESDL5V0D3-2 SOT-323. STAND-OFF VOLTAGE Volts POWER DISSIPATION - 50 WATTS ESD PROTECTION DEVICE
LITE-ON SEMICONDUCTOR ESD PROTECTION DEVICE STAND-OFF VOLTAGE - 5.0 Volts POWER DISSIPATION - 50 WATTS GENERAL DESCRIPTION The is low capacitance TVS arrays designed to protect high speed data interfaces.
More informationPeak Pulse Current (tp = 8/20us) Ipp 2.5 A. Storage Temperature Range Tstg -55 to I PP = 1A, tp = 8/20µs
LITE-ON SEMICONDUCTOR ESD PROTECTION DEVICE STAND-OFF VOLTAGE 5.0 Volts POWER DISSIPATION 60 WATTS GENERAL DESCRIPTION The has been specifically designed to protect sensitive components which are connected
More informationL30ESDL5V0C6-4X SOT23-6L. STAND-OFF VOLTAGE Volts POWER DISSIPATION WATTS ESD PROTECTION DEVICE GENERAL DESCRIPTION FEATURES APPLICATION
LITE-ON SEMICONDUCT L0ESDLV0C-X ESD PROTECTION DEVICE STANOFF VOLTAGE -.0 Volts POWER DISSIPATION - 00 WATTS GENERAL DESCRIPTION The L0ESDLV0C-X is low capacitance TVS arrays designed to protect high speed
More informationL05ESDL5V0NA-4. STAND-OFF VOLTAGE Volts POWER DISSIPATION - 50 Watts ESD PROTECTION DEVICE SLP2510P8
ESD PROTECTION DEVICE STAND-OFF VOLTAGE - 5.0 Volts POWER DISSIPATION - 50 Watts GENERAL DESCRIPTION The is ultra low capacitance TVS arrays designed to protect high speed data interfaces. This series
More informationST0561D4. 1-Line Bi-directional TVS Diode. Description. Mechanical Characteristics. Applications. Features. Ordering Information
-Line Bi-directional TVS Diode Description The ST56D4 is a bi-directional TVS diode, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making this
More informationApplications. Keypads Side Keys,LCD Displays IEC (ESD) immunity test Air discharge: ±30kV Contact discharge: ±30kV
1-Line Low Capacitance Bi-directional TVS Diode Description The is a bi-directional TVS diode, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage,
More informationDescription Mechanical Characteristics Features Applications Ordering Information Part Number Packaging Reel Size
ST36D4 -Line Bi-directional TVS Diode Description The ST36D4 is a bi-directional TVS diode, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
More informationBi-directional ESD Protection Diode
Bi-directional ESD Protection Diode FEATURES Meet IEC61-4-2 (ESD) ±15kV (air), ±8kV (contact) Meet IEC61-4-4 (EFT) rating. 4A (5/5ns) Protects one Bi-directional I/O line Moisture sensitivity level: level
More informationGSOT04C~ GSOT15C ESD PROTECTION DUAL TRANSIENT VOLTAGE SUPPRESSORS ARRAY FOR ESD PROTECTION
ESD DESCRIPTION The GSOT04C~GSOT15C are dual monolithic voltage suppressor designed to protect components which are connected to data and transmission lines against ESD. It clamps the voltage just above
More informationFeatures. Case Material: Molded Plastic, Green Molding Compound. Computers and Peripheral
LOW CAPACITANCE BIDIRECTIONAL TVS DIODE Product Summary V BR (Min) I PP (Max) C T (Typ) 15V 9A 2pF Description This new generation TVS is designed to protect sensitive electronics from the damage due to
More informationWPE0541P1 1-Line Bi-directional Low Capacitance TVS Diode
Description Mechanical Characteristics The is designed to protect voltage sensitive components from ESD and transient voltage events. Excellent clamping capability, low leakage, and fast response time,
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s SDT23CXXL02 series are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage
More information2-Line ESD Protection Array
DESCRIPTION The SPE0532 are designed by TVS bi-direction device that is to protect sensitive electronics from damage or latch-up due to ESD. They are designed for use in applications where board space
More informationTESDC24V Taiwan Semiconductor
Bi-directional TVS Diode Array FEATURES - Meet IEC61-4-2 (ESD) ±15kV (air), ±8kV (contact) 6 - Meet IEC61-4-4 (EFT) rating. A (5/5ns) 3 - Protects one Bi-directional I/O line 5 - Working Voltage : 24V
More informationESDAxxL DUAL TRANSIL ARRAY FOR ESD PROTECTION
Application Specific Discretes A.S.D. ESDAxxL DUAL TRANSIL ARRAY FOR ESD PROTECTION APPLICATIONS Where transient overvoltage protection in ESD sensitive equipment is required, such as : - COMPUTERS - PRINTERS
More informationPESDR0554S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Ordering Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS array, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
More informationJIEJIE MICROELECTRONICS CO., Ltd
JIEJIE MICROELECTRONICS CO., Ltd SRV05 4B TVS Diode Array Rev.1.0 FEATURES: Protects four I/O lines Low clamping voltage Low operating voltage Low capacitance RoHS compliant MAIN APPLICATIONS SOT23-6L
More informationSPE6V8UN Ultra Low Capacitance 2 -Line ESD Protection Array
DESCRIPTION The is 2-channel very low capacitance ESD transient voltage suppressor which provides a very high level of protection for sensitive electronic components that may be subjected to electrostatic
More informationBi-directional ESD Protection Diode
// Bidirectional ESD Protection Diode FEATURES Meet IEC642 (ESD) ±k (air), ±8k (contact) Designed for mounting on small surface Protects one Bidirectional I/O line Moisture sensitivity level 1 Working
More informationAlfa-MOS Technology. AFE0563 One-Line ESD Protection Low Capacitance Bi-direction TVS. General Description. Pin Description ( DFN )
General Description are designed by bi-direction TVS diode, to protect high speed data interfaces. This product has been specifically designed to protect sensitive components which are connected to data
More informationPESDLC553T5VU Low Capacitance ESD Protector
Description The is a TVS array designed to protect I/O or data lines from the damaging effects of ESD. It is low capacitance transient voltage suppressors for high speed data interface that designed to
More informationJIEJIE MICROELECTRONICS CO., Ltd
JIEJIE MICROELECTRONICS CO., Ltd Rev.4.0 FEATURES 620 Watts peak pulse power per line (tp=8/20µs) Protects two line pairs Low clamping voltage Low operating voltage RoHS compliant MAIN APPLICATIONS SOP-8
More informationSRV05-4L. Ultra Low Capacitance Array for ESD Protection. Features. Description. Main applications. Protection solution to meet. Ordering Information
Ultra Low Capacitance Array for ESD Protection Description The provides a typical line to line capacitance of 0.80pF and low insertion loss up to 3GHz providing greater signal integrity making it ideally
More informationPESDALC143T5VU Low Capacitance ESD Protector
Low Capacitance ESD Protector Description The is low capacitance transient voltage suppressor for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to
More informationFeatures U-DFN Pin Description (Top View)
4 CHANNEL LOW CAPACITANCE TVS DIODE ARRAY Product Summary V BR (Min) I PP (Max) C I/O (Typ) 5.5V 3.5A 0.45pF Description The is a high-performance device suitable for protecting four high speed I/Os. These
More informationPESDNC553T5VU Normal Capacitance ESD Protector
Normal Capacitance ESD Protector Description The is a TVS array designed to protect I/O or data lines from the damaging effects of ESD. It is normal capacitance transient voltage suppressors for high speed
More informationSRV05-4A TVS Arrays. Mechanical Characteristics. Applications
SRV05-4A TVS Arrays Description The SRV05-4A is a low capacitance TVS (Transient Voltage Suppressor) array designed to protect sensitive semiconductor components from electrical overstress when interfaced
More informationJIEJIE MICROELECTRONICS CO., Ltd
JIEJIE MICROELECTRONICS CO., Ltd JEUSR70 Low Capacitance TVS Diode Array Rev.1.2 FEATURES: Protects two I/O lines Low clamping voltage Array of surge rated, low capacitance diodes Solid-state silicon-avalanche
More informationPESDLC363T5VU ESD Protector
ESD Protector Description The protects sensitive semiconductor components from damage or upset due to electrostatic discharge (ESD) and other voltage induced transient events. They feature large cross-sectional
More informationLow-Capacitance Bidirectional Micro Packaged TVS Diodes for ESD Protection
ESD5B5CL Low-Capacitance Bidirectional Micro Packaged TVS Diodes for ESD Protection The ESD5B5CL is designed with Leiditech Punch-Through process TVS technology to protect voltage sensitive components
More informationCP05 - CP24C MULTI-LINE TVS ARRAY PIN CONFIGURATIONS
MULTI-LINE TVS ARRAY Description The CPxx and CPxxC series are subminiature monolithic TVS suppressor arrays designed for the protection of sensitive IC components from the damaging effects of Electrostatic
More informationTVS/ESD Arrays. RLSD32AxxxLC Series. Circuit Protection System ELECTRONICS
ELECTRONICS TVS/ESD Arrays RLSD32AxxxLC Series TVS/ESD Arrays - RLSD32AxxxLC Series Features 350 Watts Peak Pulse Power per Line (tp = 8/20μs) Bidirectional Configuration Protects One Power or I/O Port
More informationESDA17P100-1U2M. High power transient voltage suppressor. Description. Features. Applications
High power transient voltage suppressor Datasheet - production data Description The ESDA17P100-1U2M is a unidirectional single line TVS diode designed to protect the power line against EOS and ESD transients.
More informationESD5Z5.0 TRANSIENT VOLTAGE SUPPRESSORS FOR ESD PROTECTION
DESCRIPTION The Series is designed to protect voltage sensitive components from ESD and transient voltage events. Excellent clamping capability, low leakage, and fast response time, make these parts ideal
More informationESDA25B1 TRANSIL ARRAY FOR ESD PROTECTION. Application Specific Discretes A.S.D. I/O 6 I/O 1 I/O 2 I/O 5
Application Specific Discretes A.S.D. ESDA25B TRANSIL ARRAY FOR ESD PROTECTION APPLICATIONS Where transient overvoltage protection in ESD sensitive equipment is required, such as : - COMPUTER - PRINTERS
More informationCharacteristics Symbol Limit Unit IF = 1.5A V F -- IF = 3.0A V F -- VR = 800V I R -- --
GLASS PASSIVATED SURFACE MOUNT BRIDGE RECTIFIERS REVERSE VOLTAGE 800 Volts FORWARD CURRENT 3.0 Ampere GENERAL DESCRIPTION Suitable for AC-to-DC bridge full wave rectification for SMPS, LED lighting, adapter,
More informationUMD05B-323 UNITED MICRO DEVICE INC. Small Surface Mount Device TVS. Description. SOD-323 Pin Configuration. Mechanical Characteristics.
SOD-323 Single Line Diode for ESD Protection Description diodes are designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA s. They offer
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description is surge rated diode arrays designed to protect high speed data interfaces. It has been specifically designed to protect sensitive
More informationPAM2CAN CAN BUS ESD PROTECTION DIODE DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
CAN BUS ESD PROTECTION DIODE DESCRIPTION The is designed to protect Controller Area Network (CAN) bus lines and other industrial applications from the damaging effects of Electrostatic Discharge (ESD)
More informationSRV05-4A. Green Products. Description. Features. China - Germany - Korea - Singapore - United States - smc-diodes.
Description The SRV05-4A is a low capacitance TVS (Transient Voltage Suppressor) array designed to protect sensitive semiconductor components from electrical overstress when interfaced to high-speed data
More informationI/O 4 NC I/O 3 I/O 1 V SS I/O 2
4 CHANNEL LOW CAPACITANCE TVS DIODE ARRAY Features Low Clamping Voltage Typical 9V at 10A 100ns, TLP Typical 9V at 10A 8μs/20μs IEC 61000-4-2 (ESD): Air ±30kV, Contact ±30kV IEC 61000-4-4 (EFT): 60A(5/50ns,
More information0534S PESDR0534S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Marking Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS arrays, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
More informationESD9X5VL ESD9X5VL. X x. Transient Voltage Suppressor
Ultra Small Profile, low capacitance Transient Voltage Suppressor Descriptions The is an ESD transient voltage suppression component which provides a very high level of protection for sensitive electronic
More informationSingle-Line ESD Protection Array
DESCRIPTION The are designed by TVS bi-direction device that is to protect sensitive electronics from damage or latch-up due to ESD. They are designed for use in applications where board space is at a
More information0504A PESDR0504S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Marking Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS array, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s SET23AXXL02 series of transient voltage suppressor (TVS) are designed to protect components which are connected to
More informationPESDALC10FN5VU Low Capacitance TVS Array
PESDALC1FN5VU Low Capacitance TVS Array Description The PESDALC1FN5VU is low capacitance transient voltage suppressor array for high speed data interface that designed to protect sensitive electronics
More informationPESDALC10N3V3U Low Capacitance TVS Array
Description The is low capacitance transient voltage suppressor array for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to ESD lightning, and other
More informationTVS/ESD Arrays. RLST23AxxxV Series. Circuit Protection System ELECTRONICS
ELECTRONICS TVS/ESD Arrays RLST23AxxxV Series TVS/ESD Arrays - RLST23AxxxV Series Features 350 Watts peak pulse power (tp = 8/20μs) Two devices protect two high-speed line pairs Low leakage current Low
More informationSDC15. TVS Diode Array for ESD Protection of 12V Data and Power Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The transient voltage suppressor (TVS) is designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical
More informationPESD2CAN CAN BUS ESD PROTECTION DIODE DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
CAN BUS ESD PROTECTION DIODE DESCRIPTION The is designed to protect Controller Area Network (CAN) bus lines and other industrial applications such as DeviceNet Bus lines from the damaging effects of Electrostatic
More informationPESDWC23T5VU ESD Protector
ESD Protector Description The is a Transient Voltage Suppressor Arrays that 3 designed to protect components which are connected to data and transmission lines against electrostatic discharge(esd), electrical
More informationUESD6V8L1F. Low Capacitance Single Line ESD Protection Diode Array UESD6V8L1F DFN General Description
Low Capacitance Single Line ESD Protection Diode Array DFN2 1.0 0.6 General Description The ESD protection diode is designed to replace multilayer varistors (MLVs) in portable applications such as cell
More informationPLR0521E ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION DFN-2 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The is an ultra low capacitance transient voltage suppressor array, designed to protect computing applications from the damaging effects of Electrostatic Discharge
More informationPESDNC523T5VU Low Capacitance ESD Protector
Description The is a TVS array designed to protect I/O or data lines from the damaging effects of ESD. it is low capacitance transient voltage suppressors for high speed data interface that designed to
More informationTVS/ESD Arrays. RLST23A712C Series. Circuit Protection System ELECTRONICS
ELECTRONICS TVS/ESD Arrays RLST23A712C Series TVS/ESD Arrays - RLST23A712C Series Features 400 Watts Peak Pulse Power per Line (tp = 8/20μs) Protects two +12V to -7V lines Low Leakage Current Low operating
More informationPTVSLC3D5VB Low Capacitance TVS
Low Capacitance TVS Description The is a low capacitance transient voltage suppressor for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to ESD lightning,
More informationPSM WATT TVS ARRAY - ASYMMETRICAL DATA LINE PROTECTOR PIN CONFIGURATION
600 WATT TVS ARRAY - ASYMMETRICAL DATA LINE PROTECTOR Description The is an asymmetrical transient voltage suppressor (TVS) array, designed specifically for RS-485 applications. This device provides protection
More informationDATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER UDD32CXXL01 series
Product specification November 05, 2018 V.0 DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER series RoHS compliant & Halogen free 2 Electrostatic Discharged Protection Devices
More informationPTVSHC2EN10VU Transient Voltage Suppressor
Transient Voltage Suppressor Description The ESD protector is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA s. They feature large
More informationESD4-DFN LOW CAPACITANCE TVS ARRAY PIN CONFIGURATION
LOW CAPACITANCE TVS ARRAY Description The is a multi-line, low capacitance, 7pF @ 2.5V bias transient voltage suppressor array. This device is designed to protect applications such as wireless telecommunication
More informationRSB6.8S LOW CAPACITANCE TVS ARRAY DESCRIPTION SC-79 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
LOW CAPACITANCE TVS ARRAY DESCRIPTION The is a low capacitance, transient voltage suppressor designed to protect applications such as wireless telecommunication devices, PCMCIA cards and portable electronics.
More informationLow Capacitance Bidirectional Single Line TVS Protection Diode UM5080T DFN
General Description UM5080T Low Capacitance Bidirectional Single Line TVS Protection Diode UM5080T DFN2 1.0 0.6 The UM5080T TVS protection diode is designed to replace multilayer varistors (MLVs) in portable
More informationPTVSHC3N7VUL1 Transient Voltage Suppressor
Transient Voltage Suppressor Description The ESD protector is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA s. They feature large
More informationUNITED MICRO DEVICE INC.
Description TVS diodes are designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA s. They offer superior electrical characteristics such
More informationSLVU WATT ULTRA LOW CAPACITANCE TVS ARRAY PIN CONFIGURATION
600 WATT ULTRA LOW CAPACITANCE TVS ARRAY Description The is a low voltage, low leakage current and ultra low capacitance TVS device designed for EOS and ESD protection of low voltage circuits commonly
More informationPART OBSOLETE NO ALTERNATE PART. Features W-WLB Bottom View
2 CHANNEL LOW CAPACITANCE TVS DIODE ARRAY Product Summary V BR (min I PP (max C T (typ 6V 7.5A.8pF Description The is a high-performance device suitable for protecting two high speed I/Os. These devices
More informationAOZ8251. One-line Bidirectional TVS Diode. Features. General Description. Applications. Signal Line
One-line Bidirectional TVS Diode General Description The AOZ8251 is a one-line bidirectional transient voltage suppressor diode designed to protect high speed data lines and voltage sensitive electronics
More informationTVS/ESD Arrays. RLST236A054LV Series. Circuit Protection System ELECTRONICS
ELECTRONICS TVS/ESD rrays RLST236054LV Series TVS/ESD rrays - RLST236054LV Series Features Solid-state silicon-avalanche technology 300 Watts Peak Pulse Power per Line (tp=8/20μs) Low operating and clamping
More informationSPE6V8UH Ultra Low Capacitance 4 -Line ESD Protection Array
DESCRIPTION The SPE6V8UH is 4-channel very low capacitance ESD transient voltage suppressor which provides a very high level of protection for sensitive electronic components that may be subjected to electrostatic
More informationUMD12L-323 UNITED MICRO DEVICE INC. Description. Ultra Low Capacitance TVS. SOD-323 Pin Configuration. Mechanical Characteristics.
Description diodes are designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA s. They offer superior electrical characteristics such as
More informationBidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in LLP1006-2M
Bidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in LLP-M 1 119 MARKING (example only) XY Bar = pin 1 marking X = date code Y = type code (see table below) DESIGN SUPPORT TOOLS Models
More informationPESDSC9D5VU ESD Protector
ESD Protector Description The ESD protector is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA s. They feature large cross-sectional
More informationWE05R. Features. Transient Voltage Suppressor IEC COMPATIBILITY (EN ) SOT-143 (Top View) Document: W , Rev: A
Document: W0005, Rev: A Transient Voltage Suppressor Features 00Watts Peak Power per Line (tp = 8/0μs) Protects two I/O lines Low operating voltage: 5V Ultra Low capacitance(
More informationSRV25-4LC ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION DFN-10 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is a dual USB port protection array that features ultra low capacitance. This device can be used in applications such as video cards, SMART
More informationUMD UNITED MICRO DEVICE INC. Small Surface Mount Device TVS. Description. SOD-523 Pin Configuration. Features. Mechanical Characteristics
SOD-523 Single Line Diode for ESD Protection Description diodes are designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA s. They offer
More informationPESDUC2FD5VB ESD Protector
ESD Protector Description The protects sensitive semiconductor components from damage or upset due to electrostatic discharge (ESD) and other voltage induced transient events. They feature large cross-sectional
More informationPSLC03 - PSLC24C. 350 watt low capacitance tvs array. applications
350 watt low capacitance tvs array Description The PSLC and PSLCxxC Series of devices are low capacitance TVS arrays available in a SOT-3 package. These devices are designed to protect Ethernet data I/O
More informationPESD5V0U2BT. 1. Product profile. Ultra low capacitance bidirectional double ESD protection diode. 1.1 General description. 1.
Ultra low capacitance bidirectional double ESD protection diode Rev. 01 27 March 2007 Product data sheet 1. Product profile 1.1 General description Ultra low capacitance bidirectional double ElectroStatic
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s component is surge rated diode array designed to protect high speed data line interfaces. It has been specifically
More informationULL0402FC05C. Description. Mechanical characteristics PIN CONFIGURATION. SMART Phones Portable Electronics SMART Cards
LOW CAPACITANCE unbumped flip chip tvs array Description The ULLC0402FC05C Flip Chip employs advanced silicon P/N junction technology for unmatched board-level transient voltage protection against Electrostatic
More informationDSL03-24T ULTRA LOW CAPACITANCE STEERING DIODE/THYRISTOR ARRAY DESCRIPTION SOT-23-6 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
ULTRA LOW CAPACITANCE STEERING DIODE/THYRISTOR ARRAY DESCRIPTION The provides ESD, EFT and surge protection for high-speed data interfaces. The 24V thyristor array, steering diode combination device meets
More informationEBLC05C - EBLC12C ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The EBLCxxC Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and SMART phones.
More informationPLC497 ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance steering diode/tvs array. Designed for protection against Electrostatic Discharge (ESD), Electrical Fast Transients
More informationSMS Volt TVS Array For ESD and Latch-Up Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Description The SMS series of TS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD, lightning, and other voltage-induced transient events. Each device will protect
More informationSingle Line ESD Protection Diode Array
General Description Single Line ESD Protection Diode Array SOD523 The ESD protection diode is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers,
More informationUM5075/5079 Single Line ESD Protection Diode Array UM5075 SOD523 UM5079 DFN General Description Applications Features
General Description Single Line ESD Protection Diode Array UM5075 SOD523 UM5079 DFN2 1.0 0.6 The ESD protection diode is designed to replace multilayer varistors (MLVs) in portable applications such as
More informationAutomotive dual-line Transil, transient voltage suppressor (TVS) for CAN bus. Description
Automotive dual-line Transil, transient voltage suppressor (TVS) for CAN bus Datasheet - production data Features 3 2 1 SOT323-3L AEC-Q101 qualified Dual-line ESD and EOS protection Stand-off voltage compatible
More informationPESDLC723T5VU Low Capacitance ESD Protector
Description The is a TVS array designed to protect I/O or data lines from the damaging effects of ESD. it is low capacitance transient voltage suppressors for high speed data interface that designed to
More informationESDA6V8UF. Description: Specification Features: Applications. Mechanical Characteristics. Order information. Transil array for data protection
ESDA6V8UF Transil array for data protection http://www.willsemi.com Description: The ESDA6V8UF is 4-channel very low capacitance ESD transient voltage suppressor which provides a very high level of protection
More informationFeatures. Applications
- MicroClamp Description The µclamp TM series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace multilayer varistors (MLVs) in portable
More informationUMDSR05 UNITED MICRO DEVICE INC. Ultra Low Capacitance Series TVS. Description. SOT-143 Pin Configuration. Features. Mechanical Characteristics
Description Dual-rail clamp diodes are designed to provide ESD protection for high speed data interfaces. They are ideal for protecting systems with high data and clock rates or for circuits requiring
More informationPSOT03LC - PSOT36LC 500 WATT ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
500 WATT ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The PSOTxxLC series are ultra low capacitance transient voltage suppressor (TVS) arrays, designed for power or data line applications that provide protection
More informationUM5304EEBF. Quad Channel Low Capacitance ESD Protection Array UM5304EEAF SC70-6/SC88/SOT363 UM5304EECF TSOP-6/SOT23-6. General Description
Quad Channel Low Capacitance ESD Protection Array UM5304EEAF SC70-6/SC88/SOT363 UM5304EEBF SC89-6/SOT563/SOT666 UM5304EECF TSOP-6/SOT23-6 General Description UM5304EEXF are surge rated diode arrays designed
More informationSRV05-4. ultra low capacitance steering diode/tvs array. Description. sot-23-6 package. applications
ultra low capacitance steering diode/tvs array Description The is a dual USB port protection array that features ultra low capacitance. This device can be used in applications such as video cards, SMART
More informationUNITED MICRO DEVICE INC. GBLC12C
GLC12C SOD-323 Single Line Diode for ESD Protection Description diodes are designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PD s. They
More informationUM5204EECE. Quad Channel Low Capacitance ESD Protection Array. General Description. Rev.03 Dec /6
Quad Channel Low Capacitance ESD Protection Array TSOP-/SOT3- General Description is surge rated diode arrays designed to protect high speed data interfaces. This series has been specifically designed
More informationLow Capacitance, Single-Line ESD Protection Diode
VBUS51BD-HD1 Low Capacitance, Single-Line ESD Protection Diode 1 MARKING (example only) 856 XY Bar = cathode marking Y = type code (see table below) X = date code 111 855 DESIGN SUPPORT TOOLS click logo
More informationSM05G. Low Capacitance Quad Line ESD Protection Diode Arry SM05/G SOT23-3. General Description. Rev.02 Nov.
Low Capacitance Quad Line ESD Protection Diode Arry SOT23-3 General Description The of transient voltage suppressors (TVS) are designed to protect components which are connected to data and transmission
More informationPSLC03 - PSLC24C. 350 watt low capacitance tvs array. applications
350 watt low capacitance tvs array Description The PSLC and PSLCxxC Series of devices are low capacitance TVS arrays available in a SOT-3 package. These devices are designed to protect Ethernet data I/O
More information