PSLC03 - PSLC24C. 350 watt low capacitance tvs array. applications
|
|
- Agatha Armstrong
- 5 years ago
- Views:
Transcription
1 350 watt low capacitance tvs array Description The PSLC and PSLCxxC Series of devices are low capacitance TVS arrays available in a SOT-3 package. These devices are designed to protect Ethernet data I/O ports against the damaging effects of ESD and EFT transient threats. The PSLC series are unidirectional devices used for common mode protection from line to ground. The PSLCxxC series are bidirectional devices typically used for differential mode or common mode protection on balanced lines. SOT-3 package Features Voltages range from 3.3 to 2 volts for both configurations. Each series provides ESD protection to > 25 kilovolts with a peak pulse power rating of 350 Watts for an 8/20µs waveshape. The PSLC and PSLCxxC series are designed to meet and exceed the IEC and IEC requirements. applications Compatible with IEC (ESD): Air 5kV, Contact 8kV Compatible with IEC (EFT): 0A, 5/50ns Compatible with IEC (Surge): 2A, 8/20µs - Level (Line- Gnd) & Level 2(Line-Line) 350 Watts Peak Pulse Power per Line (tp = 8/20µs) Unidirectional and Bidirectional Configurations Protects Line Low Clamping Voltage Low Capacitance: 3pF Typical RoHS Compliant REACH Compliant Ethernet - 0/00/000 Base T Cellular Phones Audio/Video Inputs FireWire, SCSI & USB Interfaces Mechanical characteristics Molded JEDEC SOT-3 Package Approximate Weight: 9 milligrams Lead-Free Pure-Tin Plating (Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 00: C 8mm Tape and Reel Per EIA Standard 8 Flammability Rating UL 9V-0 PIN CONFIGURATIONs UNIDIRECTIONAL BIDIRECTIONAL 0509.R7 3/3 Page
2 typical device characteristics MAXIMUM 25 C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS Operating Temperature T L -55 to 50 C Storage Temperature T STG -55 to 50 C Peak Pulse Power (tp = 8/20µs) - See Figure P PP 350 Watts ELECTRICAL CHARACTERISTICS PER 25 C Unless Otherwise Specified PART NUMBER (Notes - 2) DEVICE MARKING RATED STAND-OFF VOLTAGE minimum breakdown voltage MAXIMUM CLAMPING VOLTAGE (Fig. 2) MAXIMUM CLAMPING VOLTAGE (Fig. 2) MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE V WM ma V (BR) I P = 5A V C 8/20µs V I PP VOLTS PSLC03 3U A 25 3 PSLC03C 3B A 25 3 PSLC05 5U A 20 3 PSLC05C 5B A 20 3 PSLC08 8U A 0 3 PSLC08C 8B A 0 3 PSLC2 2U PSLC2C 2B PSLC5 5U A 3 PSLC5C 5B A 3 PSLC2 2U N/A 6.0A 3 PSLC2C 2B N/A 6.0A 3 notes. Part numbers with an additional C suffix are bidirectional devices, i.e., PSLC05C. 2. Unidirectional Only: Positive potential is applied from pin 2 to or pin 3 WM I D MHz C pf 0509.R7 3/3 Page 2
3 typical device characteristics 0,000 figure peak pulse power vs pulse time P PP - Peak Pulse Power - Watts, W, 8/20µs Waveform ,000 0,000 t d - Pulse Duration - µs I PP - Peak Pulse Current - % of I PP t f figure 2 pulse wave form Peak Value I PP e -t t d = t/(i PP /2) TEST WAVEFORM PARAMETERS t f = 8µs t d = 20µs t - Time - µs % Of Rated Power figure 3 power derating curve Peak Pulse Power 8/20µs Average Power T A - Ambient Temperature - C 0509.R7 3/3 Page 3
4 typical device characteristics 0 figure overshoot & clamping voltage for PSLC Volts per Division ESD Test Pulse - 5 kilovolt, /30ns (Waveshape) figure 5 insertion loss - pslc05 figure 5 return loss - pslc db per Division Ref 0 Ref db per Division MHz per Division 00 MHz per Division 0509.R7 3/3 Page
5 SPICE MODEL figure spice model I/O I/O ABD ABD LCRD LCRD LCRD LCRD ABD Lg 0.8nH Lg 0.65nH UNIDIRECTIONAL BIDIRECTIONAL ABD - Avalanche Breakdown Diode (TVS) LCRD: Low Capacitance Rectifier Diode Lg - Lead Inductance table - spice parameters parameter unit abd(tvs) LCRD BV V See Table IBV µa 0.0 C jo pf See Table 2 5 I S A See Table 2 E-3 Vj V M N - R S Ohms See Table TT s E-8 E-9 EG ev.. table 2 - abd specific spice parameters PART NUMBER b v (volts) c jo (pf) i s (amps) rs(ohms) PSLC E PSLC E- 0.8 PSLC E- 0.2 PSLC E-3.0 PSLC E-3.3 PSLC E-3.2 PSLC03C E PSLC05C E- 0.8 PSLC08C E- 0.2 PSLC2C E-3.0 PSLC5C E-3.3 PSLC2C E R7 3/3 Page 5
6 application information GND SOLDER PAD USB OUTPUT CONNECTOR D+ USB IC D- figure - USB Protection Two PSLCxx (Unidirectional) in a Common-Mode configuration. Circuit connectivity is as follows: Device : Line (D+) is connected to pins 2 and 3. Device 2: Line 2(D-) is connected to pins 2 and 3. Device and 2: Pins and connected to ground R X ETHERNET TRANSCEIVER R R 2 3 RJ-5 T X figure 2 - ethernet protection One PSLCxxC (Bidirectional) in a Differential-Mode configuration. Circuit connectivity is as follow: Line (R X ) is connected to pins and. Line 2 (T X ) is connected to pins 2 and 3. circuit board recommendations Circuit board layout is critical for electromagnetic compatibility protection. The following guidelines are recommended: The protection device should be placed near the input terminals or connectors, the device will divert the transient current immediately before it can be coupled into the nearby traces. The path length between the TVS device and the protected line should be minimized. All conductive loops including power and ground loops should be minimized. The transient current return path to ground should be kept as short as possible to reduce parasitic inductance. Ground planes should be used whenever possible. For multilayer PCBs, use ground vias R7 3/3 Page 6
7 SOT-3 package information outline dimensions millimeters inches dim min max min max A A G L B C B S J D F L K G J F D K L H C L R R S NOTEs. Dimensioning and tolerances per ANSI Y.M, Controlling dimension: inches. 3. Dimensions are exclusive of mold flash and metal burrs. pad layout dimensions C A dim millimeters inches min max min max A B D B C D E F NOTES. Controlling dimension: inches. E F 0509.R7 3/3 Page 7
8 TAPE AND REEL t D P0 P2 0 Pitches Cumulative Tolerance on Tape. ± 0.2 E Top Cover Tape K0 A0 Pin F W B0 P User Direction of Feed Reel Dia. Tape Width specifications A0 B0 K0 D E F W P0 P2 P tmax 78mm (7 ) 8mm 3.0 ± ± ± ± ± ± ± ± ± ± Notes. Dimensions are in millimeters. 2. Surface mount product is taped and reeled in accordance with EIA Suffix - T7 = 7 Reel - 3,000 pieces per 8mm tape.. Suffix - T3 = 3 Reel - 0,000 pieces per 8mm tape. 5. Marking on Part - marking code (see page 2) and date code. Package outline, pad layout and tape specifications per document number 060.R 8/0. base PART NUMBER (xx = Voltage) ORDERING INFORMATION LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty PSLCxx/PSLCxxC -LF -T7 3,000 7 n/a PSLCxx/PSLCxxC -LF -T3 0,000 3 n/a This device is only available in a Lead-Free configuration R7 3/3 Page 8
9 company information COMPANY PROFILE In business more than 20 years, ProTek Devices is a privately-held company located in Tempe, Arizona, that offers a product line of transient voltage suppressors (TVS); avalanche breakdown diodes; steering diode TVS arrays and other surge suppressor component products. These TVS devices protect electronic systems from the effects of lightning, electrostatic discharge (ESD), nuclear electromagnetic pulses (NEMP), inductive switching and EMI / RFI. ProTek Devices also offers high performance interface and linear products that include analog switches; multiplexers; LED drivers; audio control ICs; RF and related high frequency products. The analog devices work in a host of consumer; industrial; automotive and other applications. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona USA By Telephone General: Sales: & Marketing: Customer Service: Product Technical Support: By Fax General: By Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com ProTek Devices (Asia Pacific) Pte. Ltd. 8 Ubi Road 2, #06-9 Zervex Singapore Tel: Fax: Web COPYRIGHT ProTek Devices This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory R7 3/3 Page 9
PSLC03 - PSLC24C. 350 watt low capacitance tvs array. applications
350 watt low capacitance tvs array Description The PSLC and PSLCxxC Series of devices are low capacitance TVS arrays available in a SOT-3 package. These devices are designed to protect Ethernet data I/O
More informationPSOT03LC - PSOT36LC 500 WATT ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
500 WATT ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The PSOTxxLC series are ultra low capacitance transient voltage suppressor (TVS) arrays, designed for power or data line applications that provide protection
More informationPLC497 ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance steering diode/tvs array. Designed for protection against Electrostatic Discharge (ESD), Electrical Fast Transients
More informationLCD05C - LCD24C HIGH POWERED MULTI-LINE TVS ARRAY DESCRIPTION 16 PIN DIP PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
HIGH POWERED MULTI-LINE TVS ARRAY DESCRIPTION The LCD Series are high powered multi-line TVS arrays available in a 16 pin DIP package. This series is designed to protect high-speed applications from the
More informationPSM WATT TVS ARRAY - ASYMMETRICAL DATA LINE PROTECTOR PIN CONFIGURATION
600 WATT TVS ARRAY - ASYMMETRICAL DATA LINE PROTECTOR Description The is an asymmetrical transient voltage suppressor (TVS) array, designed specifically for RS-485 applications. This device provides protection
More informationPLCDA03C-6 - PLCDA15C-6
5 WATT MULTI-LINE LOW CAPACITANCE TVS ARRAY Description The PLCDAxxC-6 Series are low capacitance multi-line transient voltage suppressor arrays that provides board level protection for standard TTL and
More informationSRV05-4. ultra low capacitance steering diode/tvs array. Description. sot-23-6 package. applications
ultra low capacitance steering diode/tvs array Description The is a dual USB port protection array that features ultra low capacitance. This device can be used in applications such as video cards, SMART
More informationGBLC03 - GBLC24C. Ethernet 10/100/1000 Base T SMART Phones Handheld - Wireless Systems USB Interface
ultra LOW CAPACITANCE TVS ARRAY Description The GBLCxx and GBLCxxC Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and
More informationCP05 - CP24C MULTI-LINE TVS ARRAY PIN CONFIGURATIONS
MULTI-LINE TVS ARRAY Description The CPxx and CPxxC series are subminiature monolithic TVS suppressor arrays designed for the protection of sensitive IC components from the damaging effects of Electrostatic
More informationSLVU WATT ULTRA LOW CAPACITANCE TVS ARRAY PIN CONFIGURATION
600 WATT ULTRA LOW CAPACITANCE TVS ARRAY Description The is a low voltage, low leakage current and ultra low capacitance TVS device designed for EOS and ESD protection of low voltage circuits commonly
More informationUSB208. ultra low capacitance steering diode array. Description. applications
ultra low capacitance steering diode array Description The is an ultra low capacitance steering diode array. This device provides circuit protection for computer interfaces, wireless bus applications and
More informationSRV05-4 ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SOT-23-6 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is a dual USB port protection array that features ultra low capacitance. This device can be used in applications such as video cards, SMART
More informationPESD2CAN CAN BUS ESD PROTECTION DIODE DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
CAN BUS ESD PROTECTION DIODE DESCRIPTION The is designed to protect Controller Area Network (CAN) bus lines and other industrial applications such as DeviceNet Bus lines from the damaging effects of Electrostatic
More informationPLC WATT ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SO-8 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
00 WATT ULTRA LOW CAPACITAE TVS ARRAY DESCRIPTION The is an ultra low capacitance TVS array that provides two lines of protection. This device protects high-frequency applications such as voice and data
More informationGBLC03 - GBLC24C. Ethernet 10/100/1000 Base T SMART Phones Handheld - Wireless Systems USB Interface
ultra LOW CAPACITANCE TVS ARRAY Description The GBLCxx and GBLCxxC Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and
More informationSR70 ULTRA LOW CAPACITANCE STEERING DIODE ARRAY DESCRIPTION SOT-143 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE ARRAY DESCRIPTION The is an ultra low capacitance steering diode array. Designed for protection against Electrostatic Discharge (ESD), Electrical Fast Transients (EFT)
More informationESD4-DFN LOW CAPACITANCE TVS ARRAY PIN CONFIGURATION
LOW CAPACITANCE TVS ARRAY Description The is a multi-line, low capacitance, 7pF @ 2.5V bias transient voltage suppressor array. This device is designed to protect applications such as wireless telecommunication
More informationPLR0521E ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION DFN-2 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The is an ultra low capacitance transient voltage suppressor array, designed to protect computing applications from the damaging effects of Electrostatic Discharge
More informationPMAD Series. High Frequency Data Lines RS-232 & RS-422 Interface Networks Ethernet 10/100 Base T Computer I/O Ports
ultra low capacitance multi-line steering diode array Description The are a low distortion steering diodes. These devices are intended for use in high frequency analog or digital data I/O ports for protection
More informationDSL03-24T ULTRA LOW CAPACITANCE STEERING DIODE/THYRISTOR ARRAY DESCRIPTION SOT-23-6 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
ULTRA LOW CAPACITANCE STEERING DIODE/THYRISTOR ARRAY DESCRIPTION The provides ESD, EFT and surge protection for high-speed data interfaces. The 24V thyristor array, steering diode combination device meets
More informationPLR ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SC-89 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance (0.7pF Max. I/O to I/O) steering diode and TVS array combo. This device provides circuit protection for interfaces
More informationEBLC05C - EBLC12C ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The EBLCxxC Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and SMART phones.
More informationPMMAD Series ULTRA LOW CAPACITANCE MULTI-LINE STEERING DIODE ARRAY DESCRIPTION SO-14 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
ULTRA LOW CAPACITANCE MULTI-LINE STEERING DIODE ARRAY DESCRIPTION The are a low distortion steering diodes. These devices are intended for use in high frequency analog or digital data I/O ports for protection
More informationSRV25-4LC ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION DFN-10 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is a dual USB port protection array that features ultra low capacitance. This device can be used in applications such as video cards, SMART
More informationPAM2CAN CAN BUS ESD PROTECTION DIODE DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
CAN BUS ESD PROTECTION DIODE DESCRIPTION The is designed to protect Controller Area Network (CAN) bus lines and other industrial applications from the damaging effects of Electrostatic Discharge (ESD)
More informationPSR3.3. ultra low capacitance steering diode/tvs array. Description. applications
ultra low capacitance steering diode/tvs array Description The is an ultra low capacitance (typically 1.5pF), transient voltage/steering diode suppressor array. This device provides circuit protection
More informationEM8D-100L EMI FILTER/TVS ARRAY DESCRIPTION DFN-16 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS CIRCUIT DIAGRAM & PIN CONFIGURATION
EMI FILTER/TVS ARRAY DESCRIPTION The is a DFN-16, 8 line low pass filter array with integrated TVS diodes. The is designed to suppress unwanted EMI/RFI signals and provide ESD protection for high-speed
More informationPLR0506LP BOTTOM VIEW ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION DFN-8 PACKAGE FEATURES APPLICATIONS
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance steering diode/tvs array. This device is designed to protect computing applications such as gigabit Ethernet,
More informationPAM04DF ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION DFN-10 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance steering diode/tvs array. This device is designed to protect automotive applications. The is available in the
More informationPLR0524P ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION DFN-10 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance steering diode/tvs array. This device is designed to protect computing applications such as gigabit Ethernet,
More informationRSB6.8S LOW CAPACITANCE TVS ARRAY DESCRIPTION SC-79 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
LOW CAPACITANCE TVS ARRAY DESCRIPTION The is a low capacitance, transient voltage suppressor designed to protect applications such as wireless telecommunication devices, PCMCIA cards and portable electronics.
More informationPLR0514LC ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION DFN-10 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance, 4-channel steering diode/tvs array. This device is designed to protect computing applications such as Gigabit
More informationULL0402FC05C. Description. Mechanical characteristics PIN CONFIGURATION. SMART Phones Portable Electronics SMART Cards
LOW CAPACITANCE unbumped flip chip tvs array Description The ULLC0402FC05C Flip Chip employs advanced silicon P/N junction technology for unmatched board-level transient voltage protection against Electrostatic
More informationP0402FC3.3C - P0402FC36C
250W FLIP CHIP TVS ARRAY DESCRIPTION The P0402FCxxC Series Flip Chips employ advanced silicon P/N junction technology for unmatched board-level transient voltage protection against Electrostatic Discharge
More informationP0603V24 ULTRA LOW CAPACITANCE ESD PROTECTION COMPONENT DESCRIPTION FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE ESD PROTECTION COMPONENT DESCRIPTION The is an ultra low capacitance ESD component designed to protect very high-speed data interfaces. The device has a typical capactiance of only
More informationSMDD3K Series HIGH POWERED DSIP TVS ARRAY DESCRIPTION DSIP PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATIONS
HIGH POWERED DSIP TVS ARRAY DESCRIPTION The are high powered TVS arrays available in a 16 pin Dual SIP package. These devices are designed to protect telecommunications equipment from the damaging effects
More informationP0201V05 ULTRA LOW CAPACITANCE ESD PROTECTION COMPONENT DESCRIPTION APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE ESD PROTECTION COMPONENT DESCRIPTION The is an ultra low capacitance ESD component designed to protect very high-speed data interfaces. The device has a typical capactiance of only
More informationULC0402FC3.3C - ULC0402FC36C
200W LOW CAPACITANCE UNBUMPED FLIP CHIP TVS ARRAY DESCRIPTION The ULC0402FCxxC Series Flip Chips employ advanced silicon P/N junction technology for unmatched board-level transient voltage protection against
More informationPUSB403 ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS
ULTRA LOW APAITANE STEERING DIODE/TVS ARRAY DESRIPTION The is an ultra low capacitance steering diode/tvs array. This device is designed to protect computing applications such as gigabit Ethernet, HDMI,
More informationPLCDA03C-6 thru PLCDA24C-6 LOW CAPACITANCE TVS ARRAY
51-6 -6 LOW APAITANE TVS ARRAY APPLIATIONS Ethernet - 1/1 Base T FireWire SSI Bluetooth & RF IE OMPATIBILITY (EN61-) 61-- (ESD): Air - 15kV, ontact - kv 61-- (EFT): A - 5/5ns 61--5 (Surge): A, /µs - Level
More informationPLRO1206 Series POLYMER PTC DEVICE DESCRIPTION PTC DEVICE APPLICATIONS FEATURES ENVIRONMENTAL SPECIFICATIONS MECHANICAL CHARACTERISTICS
POLYMER PTC DEVICE DESCRIPTION Surface mount PTC devices are the preferred over-current protection method for computer, consumer electronic, portable electronics and automotive applications. These devices
More informationPMPS Description. ptc device. applications
polymer ptc device Description Surface mount PTC devices are the preferred over-current protection method for computer, consumer electronic, portable electronics and automotive applications. These devices
More informationAPPLICATIONS ELECTRICAL SPECIFICATIONS. MAXIMUM FAULT CURRENT (Note 4) I MAX AMPS. MAXIMUM INTERRUPT VOLTAGE (Note 3) V MAX VOLTS
POLYMER PTC DEVICE DESCRIPTION Surface mount PTC devices are the preferred over-current protection method for computer, consumer electronic, portable electronics and automotive applications. These devices
More informationPMPS-E-1206 SERIES POLYMER PTC DEVICE DESCRIPTION PTC DEVICE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
POLYMER PTC DEVICE DESCRIPTION Surface mount PTC devices are the preferred over-current protection method for computer, consumer electronic, portable electronics and automotive applications. These devices
More informationRClamp0504S RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationAPPLICATIONS DEVICE SYMBOL BIDIRECTIONAL TABLE 1 - SURGE RATINGS AMPS
THYRISTOR SURGE SUPPRESSOR DESCRIPTION The PP-SM Series are thyristor surge suppression (TSS) devices designed to protect telecommunication equipment against lightning and transients induced by AC power
More informationRClamp TM 0504M RailClamp Low Capacitance TVS Diode Array PRELIMINARY Features
Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The RClamp series has been specifically designed to protect sensitive components which are connected
More informationSDC15. TVS Diode Array for ESD Protection of 12V Data and Power Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The transient voltage suppressor (TVS) is designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical
More informationRClamp0504F RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationPESDALC143T5VU Low Capacitance ESD Protector
Low Capacitance ESD Protector Description The is low capacitance transient voltage suppressor for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to
More informationBASIC REFERENCE DATA. Maximum Voltage (RMS) 600 V Temperature Range -40 to +85 C Resistance (25 C) 6-12 Ω ELECTRICAL SPECIFICATIONS
POLYMER PTC THERMISTOR DESCRIPTION Surface mount PTC devices are the preferred over-current protection method for computer, consumer electronic, portable electronics and automotive applications. These
More informationFeatures. Applications
Description are surge rated diode arrays designed to protect high speed data interfaces. The SR series has been specifically designed to protect sensitive components which are connected to data and transmission
More informationRClamp0502A RailClamp Low Capacitance TVS Array
- RailClamp Description The RailClamp series consists of ultra low capacitance TS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
More informationSMDA05C-7 THRU SMDA24C-7
Description The SMDAxxC-7 series of transient voltage suppressors are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge
More informationRClamp0522P RClamp0524P
PROTECTION PRODUCTS - RailClamp Description RailClamps are ultra low capacitance TVS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
More information0534S PESDR0534S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Marking Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS arrays, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
More informationPESDR0554S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Ordering Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS array, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
More informationRClamp0504FA RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamp low capacitance TVS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationRClamp1502B. Ultra-Low Capacitance TVS for ESD and CDE Protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description RailClamps are ultra low capacitance TS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are
More informationSM05G. Low Capacitance Quad Line ESD Protection Diode Arry SM05/G SOT23-3. General Description. Rev.02 Nov.
Low Capacitance Quad Line ESD Protection Diode Arry SOT23-3 General Description The of transient voltage suppressors (TVS) are designed to protect components which are connected to data and transmission
More informationRClamp0504PA RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamp TVS diodes are specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic
More informationLCDA15C-6. Low Capacitance TVS Diode Array For Multi-mode Tranciever Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The LCDA15C6 has been specifically designed to protect sensitive components which are connected to data and transmission lines from over voltages caused by electrostatic discharge (ESD), electrical
More informationRClamp0502B. Ultra-Low Capacitance TVS for ESD and CDE Protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description RailClamps are ultra low capacitance TS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are
More informationPESDLC553T5VU Low Capacitance ESD Protector
Description The is a TVS array designed to protect I/O or data lines from the damaging effects of ESD. It is low capacitance transient voltage suppressors for high speed data interface that designed to
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s component is surge rated diode array designed to protect high speed data line interfaces. It has been specifically
More informationSMS Volt TVS Array For ESD and Latch-Up Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Description The SMS series of TS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD, lightning, and other voltage-induced transient events. Each device will protect
More informationPTVSLC3D5VB Low Capacitance TVS
Low Capacitance TVS Description The is a low capacitance transient voltage suppressor for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to ESD lightning,
More informationuclamp0801t Low Profile μclamp 1-Line ESD protection PROTECTION PRODUCTS - MicroClamp Description Features Mechanical Characteristics Applications
- MicroClamp Description The μclamp series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace multilayer varistors (MLVs) in portable
More informationPESDLC363T5VU ESD Protector
ESD Protector Description The protects sensitive semiconductor components from damage or upset due to electrostatic discharge (ESD) and other voltage induced transient events. They feature large cross-sectional
More informationRClamp2504P & RClamp3304P RailClamp 2.5V & 3.3V TVS Arrays
- RailClamp Description RailClamp is a low capacitance TS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationSRV05-4L. Ultra Low Capacitance Array for ESD Protection. Features. Description. Main applications. Protection solution to meet. Ordering Information
Ultra Low Capacitance Array for ESD Protection Description The provides a typical line to line capacitance of 0.80pF and low insertion loss up to 3GHz providing greater signal integrity making it ideally
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description is surge rated diode arrays designed to protect high speed data interfaces. It has been specifically designed to protect sensitive
More informationPESDWC23T5VU ESD Protector
ESD Protector Description The is a Transient Voltage Suppressor Arrays that 3 designed to protect components which are connected to data and transmission lines against electrostatic discharge(esd), electrical
More informationRClamp0582B. Low Capacitance RClamp ESD and EOS Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
RClamp582B Low Capacitance RClamp ESD and EOS Protection PROTECTION PRODUCTS Description The RClamp 582B transient voltage suppressor is specifically designed to protect sensitive components which are
More informationSRV05-4 RailClamp Low Capacitance TVS Diode Array
Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The SR series has been specifically designed to protect sensitive components which are connected to data
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s SET23AXXL02 series of transient voltage suppressor (TVS) are designed to protect components which are connected to
More informationRClamp0521PA. Ultra-Low Capacitance 1-Line ESD protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description RailClamp TS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
More informationPESDNC553T5VU Normal Capacitance ESD Protector
Normal Capacitance ESD Protector Description The is a TVS array designed to protect I/O or data lines from the damaging effects of ESD. It is normal capacitance transient voltage suppressors for high speed
More informationPTVSLC3D24VB Low Capacitance TVS
Description The is a low capacitance transient voltage suppressor for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to ESD lightning, and other voltage
More information0504A PESDR0504S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Marking Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS array, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
More informationPESDNC523T5VU Low Capacitance ESD Protector
Description The is a TVS array designed to protect I/O or data lines from the damaging effects of ESD. it is low capacitance transient voltage suppressors for high speed data interface that designed to
More informationSDC36C. TVS Diode Array for Proximity Switch Input Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Description The is a highsurge transient voltage suppressor (TS) optimized for protection of sensitive digital sensors used in proximity switches and industrial control applications. The protects the components
More information500 W, Bidirectional Low Capacitance TVS Array
Available 500 W, Bidirectional Low Capacitance TVS Array DESCRIPTION This Transient Voltage Suppressor (TVS) is assembled in a QFN-143 package which has the same pinout and footprint as the SOT-143 package.
More informationWE05R. Features. Transient Voltage Suppressor IEC COMPATIBILITY (EN ) SOT-143 (Top View) Document: W , Rev: A
Document: W0005, Rev: A Transient Voltage Suppressor Features 00Watts Peak Power per Line (tp = 8/0μs) Protects two I/O lines Low operating voltage: 5V Ultra Low capacitance(
More informationST0561D4. 1-Line Bi-directional TVS Diode. Description. Mechanical Characteristics. Applications. Features. Ordering Information
-Line Bi-directional TVS Diode Description The ST56D4 is a bi-directional TVS diode, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making this
More informationDATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER UDD32CXXL01 series
Product specification November 05, 2018 V.0 DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER series RoHS compliant & Halogen free 2 Electrostatic Discharged Protection Devices
More informationFeatures. Applications
- MicroClamp Description The µclamp TM series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace multilayer varistors (MLVs) in portable
More informationAQ24CANFD 200W TVS Diode Array
AQ24CANFD 200W TVS Diode Array RoHS Pb GREEN Description The AQ24CANFD is designed to protect automotive Controller Area Network (CAN lines from damage due to electrostatic discharge (ESD, electrical fast
More informationTVS/ESD Arrays. RLST23AxxxV Series. Circuit Protection System ELECTRONICS
ELECTRONICS TVS/ESD Arrays RLST23AxxxV Series TVS/ESD Arrays - RLST23AxxxV Series Features 350 Watts peak pulse power (tp = 8/20μs) Two devices protect two high-speed line pairs Low leakage current Low
More informationPESDLC723T5VU Low Capacitance ESD Protector
Description The is a TVS array designed to protect I/O or data lines from the damaging effects of ESD. it is low capacitance transient voltage suppressors for high speed data interface that designed to
More informationUM5204EECE. Quad Channel Low Capacitance ESD Protection Array. General Description. Rev.03 Dec /6
Quad Channel Low Capacitance ESD Protection Array TSOP-/SOT3- General Description is surge rated diode arrays designed to protect high speed data interfaces. This series has been specifically designed
More informationRClamp0524PA RClamp0522P
PROTECTION PRODUCTS - RailClamp Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed
More informationRClamp0551P. Ultra-Low Capacitance 1-Line, 5V ESD protection. PRELIMINARY Features. PROTECTION PRODUCTS - RailClamp Description
- RailClamp Description RailClamp TS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
More informationSurge Components, Inc.
1.FEATURE Surge Components, Inc. 100 Watts Peak Power per Line(tp=8/20us) SOT-563 package Protects four bidirectional lines and five Unidirectional lines Monolithic structure Working woltage: 5V Low clamping
More informationApplications. Keypads Side Keys,LCD Displays IEC (ESD) immunity test Air discharge: ±30kV Contact discharge: ±30kV
1-Line Low Capacitance Bi-directional TVS Diode Description The is a bi-directional TVS diode, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage,
More informationPESDSC9D5VU ESD Protector
ESD Protector Description The ESD protector is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA s. They feature large cross-sectional
More informationUMDSR05 UNITED MICRO DEVICE INC. Ultra Low Capacitance Series TVS. Description. SOT-143 Pin Configuration. Features. Mechanical Characteristics
Description Dual-rail clamp diodes are designed to provide ESD protection for high speed data interfaces. They are ideal for protecting systems with high data and clock rates or for circuits requiring
More informationSP pF SOT23-6L 4 Channels Diode Array
SP319.3pF SOT23-6L 4 Channels Diode Array RoHS Pb GREEN Description 4 5 6 3 2 1 SP312-3UTG Pinout *Pins 6, 7, 9, 1 are not internally connected but should be connected to the trace. 6 7 8 9 1 5 4 3 2 1
More informationRClamp3374N. High Power TVS for Ethernet Interfaces. PRELIMINARY Features
PROTECTION PRODUCTS - RailClamp Description RailClamp TS diodes are specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage
More informationSurge Components, Inc.
1.FEATURE 100 Watts Peak Power per Line(tp=8/20us) SC-70-6L package Protect 4 lines bidirectional and 5 lines unidirectional Monolithic structure Working woltage: 5V Low clamping voltage ESD protection
More information