Stainless Steel Housing
|
|
- Madeleine Garrison
- 5 years ago
- Views:
Transcription
1 Stainless Steel Housing Oil-resistant, Robust, Compact Photoelectric Sensor with Built-in Amplifier EZM-C A New Photoelectric Sensor Designed for the Automotive and Machine Tool Industries Features Oil-resistant, Robust, and Compact (IP67g Degree of Protection).8 SUS6L. 5. Oil-resistant PVC cable, -mm dia. Two, M holes Actual Size Features A Through-beam Sensor with a Visible Spot for Easy Beam Adjustment Features Twist-and-Click M Pre-wired Connector Only /8 th Turn Locks the Connectors
2 EZM-C Photoelectric Sensors A New Sensor with Stainless Steel Housing That's Strong, Compact, and Easy to Use! Resists Oils and Coolants The EZM-C features a simple shape and structure that resist oils and coolants, performance that meets or exceeds any previous models from OMR. The protective structure eliminates the need for screws to hold a cover, so there are no worries about loose screws leading to liquid penetration. And the model number is laser-marked on the housing so it's always readable when the time comes to order maintenance parts. The compact, easy-to-use EZM-C with built-in amplifier is ideal for oily environments. Insulation resistance (MΩ) Comparison Example for Oil Resistance (Test Oil: Gryton 7D) EZM-C Conventional metal sensor Immersion time (h) EZM-C Laser Marking World's Smallest, and Yet Robust Patent Pending The EZM-C is the same compact size as the EZ, making it the smallest square metal photoelectric sensor in the world (according to OMR investigation). The SUS6L housing makes it robust, and removes all worries of the coating coming off. EZM-C EZ Application Precaution Use the EZM-T/-R/-D/-LS in food processing or beverage filling applications where cleaners or disinfectants are present.
3 Advanced Industrial Automation Perfectly Reliable Detection Performance and Connection Method Visible Beam. Long-distance Operation Even in Dusty, Dirty Environments Bright Orange Spot The uses a bright orange LED to generate a spot that's visible m away. And the stronger beam used to achieve a detection distance of m means that Sensor operation is possible even in dusty, dirty environments (response time: ms). It all adds up to a more visible, more dependable worksite. m Simple, Yet Dependable M Twist-and-Click Pre-wired Connectors These Connectors match the XS5 Connectors, which reduce wiring work. They eliminate the troublesome need to control torque when tightening connectors, and remove worries about screws loosening due to vibration. EZM-C@@@-MTJ Locks with a /8 th Turn Insert completely. "Click" Twist /8 th turn. Unique Miniaturization and Modularization Technologies Sensing Module The optical system and signal processing are all contained in one module, providing all the main functions required of a Photoelectric Sensor. Optical System Maximizes manufacturing technology, including sophisticated inline optical axis adjustment. Internal Structure Signal Processing Leading-edge technology for stabilization and miniaturization is obvious in the photo IC, which includes an external light interference prevention algorithm, CSP* mounting, and other components. *Chip Scale Package Cross Section
4 Oil-resistant, Robust, Compact Photoelectric Sensor (Stainless Housing and Built-in Amplifier) EZM-C Designed for the Automotive and Machine Tool Industries Oil-resistant, water-resistant, robust body made of stainless steel. Same size as the EZ: The smallest square metal photoelectric sensor in the world. Through-beam Models with an orange spot that's visible m away, and a long distance detection to reduce the influence of dirt (detection distance: m, response time: ms). Models with M twist-and-click pre-wired connectors. Reversed output polarity protection, external light interference prevention algorithm, and RoHS compliance to inherit the EZ s reliability. Refer to Safety Precautions on page Ordering Information Sensors Sensing method Throughbeam Retroreflective Diffusereflective BGS reflective Orange light Red light Infrared light Appearance Connection method Sensing distance Model NPN output PNP output Pre-wired ( m) EZM-CT6 EZM-CT8 Pre-wired (5 m) EZM-CT6 5M EZM-CT8 5M M twist-and-click prewired connector (. m) 5 m EZM-CT6-MTJ EZM-CT8-MTJ Connector (M8, pins) EZM-CT66 EZM-CT86 Pre-wired ( m) EZM-CT6B EZM-CT8B Pre-wired (5 m) EZM-CT6B 5M EZM-CT8B 5M M twist-and-click prewired connector (. m) m EZM-CT6B-MTJ EZM-CT8B-MTJ Connector (M8, pins) EZM-CT67B EZM-CT87B Pre-wired ( m) EZM-CR6 EZM-CR8 M twist-and-click prewired connector (. m) m ( mm) EZM-CR6-MTJ EZM-CR8-MTJ (Using E9-RS) Connector (M8, pins) EZM-CR66 EZM-CR86 Pre-wired ( m) EZM-CD6 EZM-CD8 M twist-and-click prewired connector (. m) m EZM-CD6-MTJ EZM-CD8-MTJ Connector (M8, pins) EZM-CD67 EZM-CD87 Pre-wired ( m) EZM-CL6H EZM-CL8H M twist-and-click prewired connector (. m) to mm EZM-CL6H-MTJ EZM-CL8H-MTJ Connector (M8, pins) EZM-CL66H EZM-CL86H Pre-wired ( m) EZM-CL6H EZM-CL8H M twist-and-click prewired connector (. m) to 5 mm EZM-CL6H-MTJ EZM-CL8H-MTJ Connector (M8, pins) EZM-CL67H EZM-CL87H Pre-wired ( m) EZM-CL6H EZM-CL8H M twist-and-click prewired connector (. m) to mm EZM-CL6H-MTJ EZM-CL8H-MTJ Connector (M8, pins) EZM-CL69H EZM-CL89H Oil-resistant, Robust, Compact Photoelectric Sensor EZM-C
5 Accessories Sensor I/O Connectors Let Us Know What You Need. Retro-reflective, Diffuse-reflective, and BGS-reflective Models are also available with a 5-m pre-wired cable. When ordering, add the cable length to the end of the model number (e.g., EZM-CD6 5M).. Models with no moving parts (i.e., without a sensitivity adjustor or mode selection switch) are also available, as are models with built-in slits (through-beam,.8 m) (e.g., EZM-CT8H M for no sensitivity adjustment, wire-connection selection of operating mode, and built-in slit).. Except for the EZM-CL@@H, models with -pin M8 connectors are available. When ordering, add -M5 to the end of the model number (e.g., EZM-CT66-M5).. Through-beam Models are also available with a light emission stop function. When ordering, add -G to the end of the model number (e.g., EZM-T6-G). Ask your OMR representative for details on any models or specifications you require. Size Cable Appearance Cable type Model m XS5F-D-D8-A M (For -MTJ models) Standard Straight -wire 5 m XS5F-D-G8-A M8 ( pins) Standard Straight L-shaped m XSF-M--A 5 m XSF-M-5-A -wire m XSF-M--A 5m XSF-M-5-A Note: Ask your OMR representative about connectors with other specifications. Mounting Brackets Appearance Model (Material) Quantity Remarks Appearance Model (Material) Quantity Remarks E9-L5 (SUS) E9-L98 (SUS) Metal Protective Cover Bracket * Mounting Brackets E9-L (SUS) E9-L5 (SUS) set (Sensor adjuster) E9-L (SUS) Horizontal Mounting Bracket * Easily mounted to the aluminum frame rails of conveyors and easily adjusted. E9-L5 (SUS) set For vertical angle adjustment E9-L (SUS) Horizontal Protective Cover Bracket * E9-L (SUS) Rear Mounting Bracket E9-L (SUS) Compact Protective Cover Bracket * Note: When using Through-beam Models, order one bracket for the Receiver and one for the Emitter. * Cannot be used for Standard Connector models. Reflector Name EZM-CR Sensing distance (typical) * Model Quantity Remarks m ( mm) (rated value) E9-R m ( mm) (rated value) E9-RS Reflector 5 m ( mm) E9-R.5 m ( mm) E9-R9.5 m ( mm) E9-R Small Reflector.5 m (5 mm) E9-R Note: When using a Reflector without a rated value, use.7 times typical value as a guideline for the sensing distance. * Values in parentheses indicate the minimum required distance between the Sensor and Reflector. Reflectors are not provided with Retroreflective models. The MSR function is enabled. Oil-resistant, Robust, Compact Photoelectric Sensor EZM-C 5
6 Ratings and Specifications Item Model Sensing method EZM-CT6 (-MTJ) NPN output EZM-CT66 PNP output EZM-CT8 (-MTJ) EZM-CT86 Through-beam Sensing distance 5 m m EZM-CT6B (-MTJ) EZM-CT67B EZM-CT8B (-MTJ) EZM-CT87B Spot diameter --- Retro-reflective with MSR function EZM-CR6 (-MTJ) EZM-CR66 EZM-CR8 (-MTJ) EZM-CR86 m [ mm] (Using E9-RS) m [ mm] (Using E9-R) * IP69K Degree of Protection Specification IP69K is a protection standard against high temperature and high-pressure water defined in the German standard DIN 5, Part 9. The test piece is sprayed with water at 8 C at a water pressure of 8 to BAR using a specified nozzle shape at a rate of to 6 liters/min. The distance between the test piece and nozzle is to 5 cm, and water is sprayed horizontally for seconds each at,, 6, and 9 while rotating the test piece on a horizontal plane. Diffuse-reflective EZM-CD6 (-MTJ) EZM-CD67 EZM-CD8 (-MTJ) EZM-CD87 m (White paper mm) Standard sensing object Opaque: -mm dia. min. Opaque: 75-mm dia. min. --- Differential travel --- /white error --- Directional angle Emitter, Receiver: to 5 (Distance between emitter and receiver. Rated sensing distance) Sensor: to Reflector: (Distance to Reflector. Rated sensing distance) % of sensing distance max. Light source (wavelength) Infrared LED (87 nm) Orange LED (65 nm) Red LED (66 nm) Infrared LED (86 nm) Power supply voltage to VDC, including % ripple (p-p) Current consumption ma (Emitter ma max., Receiver ma max.) 5 ma max. Control output Protection circuits Response time Sensitivity adjustment Ambient illumination (Receiver side) Ambient temperature range Ambient humidity range Insulation resistance Dielectric strength Vibration resistance Shock resistance Degree of protection * Connection method Indicator Weight (packed state) Materials Accessories power supply voltage: VDC max., current: ma max. (Residual voltage: V max.) Open-collector output (NPN/PNP output depending on model) Light-/Dark- switch selectable Reversed power supply polarity protection, Output shortcircuit protection, and Reversed output polarity protection Operate or reset: ms max. One-turn adjuster Operate or reset: ms max. Incandescent lamp:, lx max., Sunlight:, lx max. Reversed power supply polarity protection, Output short-circuit protection, Reversed output polarity protection, and Mutual interference prevention Operate or reset: ms max. Operating: 5 to 55 C, Storage: to 7 C (with no icing or condensation) Operating: 5% to 85%, Storage: 5% to 95% (with no condensation) MΩ min. at 5 VDC, VAC, 5/6 Hz for min Destruction: to 55 Hz,.5-mm double amplitude for hours each in X, Y, and Z directions Destruction: 5 m/s times each in X, Y, and Z directions IEC: IP67, DIN 5-9: IP69K -C@@/-C@@(B): Pre-wired cable (standard length: m, -MTJ: Pre-wired connector with.-m cable) -C@@6/-C@@7(B): M8 -pin connector Operation indicator (yellow), Stability indicator (green) (Emitter has only power supply indicator (green).) Pre-wired models Approx. 5 g (-MTJ: Approx. 9 g) Approx. 9 g (-MTJ: Approx. 5 g) Connector models Approx. 6 g Approx. g Housing Lens Indication Sensitivity adjustment and mode selector switch Seals SUS6L PMMA (polymethylmethacrylate) PES (polyethersulfone) PEEK (polyetheretherketone) Fluoro rubber Instruction sheet (Note: Reflectors and Mounting Brackets are sold separately.) Oil-resistant, Robust, Compact Photoelectric Sensor EZM-C
7 Item Model Sensing distance Spot diameter Sensing method NPN output PNP output EZM-CL6H (-MTJ) EZM-CL66H EZM-CL8H (-MTJ) EZM-CL86H to mm (White paper mm) -mm dia. at sensing distance of mm BGS Reflective EZM-CL6H (-MTJ) EZM-CL67H EZM-CL8H (-MTJ) EZM-CL87H to 5 mm (White paper mm) -mm dia. at sensing distance of 5 mm EZM-CL6H (-MTJ) EZM-CL69H EZM-CL8H (-MTJ) EZM-CL89H to mm (White paper mm) 8-mm dia. at sensing distance of mm Standard sensing object --- Differential travel % of sensing distance max. 5% of sensing distance max. % of sensing distance max. /white error 5% of sensing distance max. % of sensing distance max. % of sensing distance max. Directional angle --- Light source (wavelength) Red LED (65 nm) Red LED (66 nm) Power supply voltage to VDC, including % ripple (p-p) Current consumption 5 ma max. power supply voltage: VDC max., current: ma max. (Residual voltage: V max.) Control output Open-collector output (NPN/PNP output depending on model) Light-/Dark- cable connection selectable Protection circuits Reversed power supply polarity protection, Output short-circuit protection, Reversed output polarity protection, Mutual interference protection Response time Operate or reset: ms max. Sensitivity adjustment --- Ambient illumination (Receiver side) Incandescent lamp:, lx max., Sunlight:, lx max. Ambient temperature range Operating: 5 to 55 C, Storage: to 7 C (with no icing or condensation) Ambient humidity range Operating: 5% to 85%, Storage: 5% to 95% (with no condensation) Insulation resistance MΩ min. at 5 VDC Dielectric strength, VAC, 5/6 Hz for min Vibration resistance Destruction: to 55 Hz,.5-mm double amplitude for hours each in X, Y, and Z directions Shock resistance Destruction: 5 m/s times each in X, Y, and Z directions Degree of protection * IEC: IP67, DIN 5-9: IP69K -CL@@H/-CL@@H/-CL@@H: Pre-wired cable (standard length: m, -MTJ: Pre-wired connector with.-m Connection method cable) -CL@@6H/-CL@@7H/-CL@@9H: M8 -pin connector Indicator Operation indicator (yellow), Stability indicator (green) Weight (packed state) Materials Accessories Pre-wired models Connector models Housing Cable Lens Display Seals Approx. 9 g (-MTJ: Approx. 5 g) Approx. g SUS6L Oil-resistant vinyl cable PMMA (polymethylmethacrylate) PES (polyethersulfone) Fluoro rubber Instruction sheet (Note: Mounting Brackets are sold separately.) Oil-resistant, Robust, Compact Photoelectric Sensor EZM-C 7
8 Engineering Data (Typical) Parallel Operating Range Through-beam Models Retro-reflective Models Distance Y (mm) 5 5 Distance Y (mm) 8 6 Distance Y (mm) 5 5 E9-R E9-RS 5 X Y X Y 5 X Y Distance X (m) Operating Range Diffuse-reflective Models BGS Reflective Models EZM-CD@/-CD@7 EZM-CL@H/-CL@6H (Vertical) EZM-CL@H/-CL@6H (Horizontal) Distance Y (mm) Sensing object: white paper Y 8 6 X Distance X (m) EZM-CL@H/-CL@7H (Vertical) EZM-CL@H/-CL@7H (Horizontal) EZM-CL@H/-CL@9H (Vertical) Distance Y (mm) EZM-CL@H/-CL@9H (Horizontal) Distance Y (mm) Sensing object: white paper X Y 6 8 Sensing object: white paper 6 Distance X (mm) Y 6 8 Distance Y (mm) Distance Y (mm) Distance X (m) Sensing object: white paper 6 8 Distance X (mm) Sensing object: white paper 6 8 X X Y Y 6 Distance X (mm) Distance Y (mm) Distance Y (mm) Distance X (m) Sensing object: white paper 6 8 Distance X (mm) 5 Sensing object: white paper 5 Y 5 X Distance X (mm) X Y X Distance X (mm) 8 Oil-resistant, Robust, Compact Photoelectric Sensor EZM-C
9 Excess Gain vs. Distance Through-beam Models Retro-reflective Models Excess gain ratio (multiple) 5 5 Excess gain ratio (multiple) Operating level.5. Operating level Excess gain ratio (multiple) 5 5 Operating level.5. E9-R E9-RS Distance (m) Distance (m) Distance (m) Diffuse-reflective Models EZM-CD@/-CR@7 Excess gain ratio (multiple) Sensing object: white paper 5 5 v Operating level Distance (m) Sensing Object Size vs. Distance Spot Diameter vs. Distance Diffuse-reflective Models BGS Reflective Models EZM-CD@/-CD@7 EZM-CL@H/-CL@6H EZM-CL@H/-CL@H/-CL@7H/-CL@9H Distance (m) d Sensing object: White paper. d. 5 6 Length d of sensing object (mm) v Spot diameter (mm) Distance (mm) Distance (mm) Spot diameter (mm) Oil-resistant, Robust, Compact Photoelectric Sensor EZM-C 9
10 Sensing Distance vs. Sensing Object Material BGS Reflective Models Sensing distance (mm) 8 6 Sensing distance (mm) Sensing distance (mm) White Veneer Cardboard paper paper rubber SUS Mirror surface Material Inclination Characteristics BGS Reflective Models EZM-CL@H (CL@6H) (Vertical) EZM-CL@H (CL@7H) (Vertical) EZM-CL@H (CL@9H) (Vertical) Sensing distance variation (%) Sensing object Center line Inclination angle +θ θ 6 8 Inclination angle θ ( ) Inclination Characteristics BGS Reflective Models EZM-CL@H (CL@6H) (Horizontal) EZM-CL@H (CL@7H) (Horizontal) EZM-CL@H (CL@9H) (Horizontal) 5 Sensing distance variation (%) Sensing object Center line Inclination angle +θ θ v White Veneer Cardboard paper Sensing distance variation (%) Sensing distance variation (%) 5 paper Sensing object Sensing object rubber SUS Center line Mirror surface Material Inclination angle +θ θ 6 8 Inclination angle θ ( ) Center line Inclination angle +θ θ Sensing distance variation (%) Sensing distance variation (%) White paper Veneer Cardboard 6 paper Sensing object Sensing object rubber Center line SUS Mirror surface Material Inclination angle +θ θ 6 8 Inclination angle θ ( ) Center line Inclination angle +θ θ Inclination angle θ ( ) Inclination angle θ ( ) Inclination angle θ ( ) Oil-resistant, Robust, Compact Photoelectric Sensor EZM-C
11 I/O Circuit Diagrams NPN Output Model Operation mode Timing charts Operation selector Output circuit EZM-CT6 EZM-CT66 EZM-CT6B EZM-CT67B EZM-CR6 EZM-CR66 EZM-CD6 EZM-CD67 EZM-CL6H EZM-CL66H EZM-CL6H EZM-CL67H EZM-CL6H EZM-CL69H Light- Dark- Light- Dark- Light incident Light interrupted Operate Reset Operation indicator (yellow) Output transistor (e.g., relay) Light incident Light interrupted Operation indicator (yellow) Output transistor (e.g., relay) Operate Reset NEAR Operation indicator (yellow) Output transistor (e.g., relay) Operation indicator (yellow) Output transistor (e.g., relay) Operate Reset (Between brown and black leads) (Between brown and black leads) FAR L side (LIGHT ) D side (DARK ) Connect pink lead () to brown lead (). Connect pink lead () to blue lead () or leave open. Through-beam Receivers, Retro-reflective Models, Diffuse-reflective Models Operation indicator (Yellow) Operation indicator (Yellow) Stability indicator (Green) Stability indicator (Green) Photoelectric Sensor Main Circuit Operate Reset (Between brown and black leads) Brown (Control ma output) max. ZD Blue Dark- to VDC (Relay) V Brown to VDC Light- (Relay) ma max. (Control output) V PNP Output Model Operation mode Timing charts Operation selector Output circuit EZM-CT8 EZM-CT86 EZM-CT8B EZM-CT87B EZM-CR8 EZM-CR86 EZM-CD8 EZM-CD87 EZM-CL8H EZM-CL86H EZM-CL8H EZM-CL87H EZM-CL8H EZM-CL89H Light- Dark- Light- Dark- Light incident Light interrupted Operate Reset Operation indicator (yellow) Output transistor (e.g., relay) Light incident Light interrupted Operate Reset Operation indicator (yellow) Output transistor (e.g., relay) Operation indicator (yellow) Output transistor (e.g., relay) Operate Reset Operation indicator (yellow) Output transistor (e.g., relay) Operate Reset (Between blue and black leads) (Between blue and black leads) NEAR FAR L side (LIGHT ) D side (DARK ) Connect pink lead () to brown lead (). Connect pink lead () to blue lead () or leave open. Through-beam Receivers, Retro-reflective Models, Diffuse-reflective Models Operation indicator (Yellow) Stability indicator (Green) (Between brown Photoelectric and black leads) Sensor ZD NEAR FAR Main Blue Circuit Pink Photoelectric Sensor Main Circuit (Control output) Brown ZD Brown Operation Stability indicator indicator (Yellow) (Green) ZD (Between blue Photoelectric and black leads) NEAR FAR (Between blue and black leads) Sensor Main Circuit Blue Pink ma max. Blue Light- to VDC Dark- (Relay) V to VDC ma max. (Control output) (Relay) V Oil-resistant, Robust, Compact Photoelectric Sensor EZM-C
12 Emitter (Either NPN or PNP Output) Model EZM-CT6 EZM-CT66 EZM-CT6B EZM-CT67B EZM-CT8 EZM-CT86 EZM-CT8B EZM-CT87B Through-beam Emitter Power indicator (Green) Photoelectric Sensor Main Circuit Circuit Brown Blue to VDC Connector Pin Arrangement M Pre-wired Connector M Connector Pin Arrangement M8 Connector M8 -pin Connector Pin Arrangement M8 -pin Connector Pin Arrangement Plugs (Sensor I/O Connectors) M Connector M8 -pin Connectors Wire color Brown White Blue Wire color Brown White Blue XS5F-D-D8-A XS5F-D-G8-A XSF-M--A XSF-M-5-A XSF-M--A XSF-M-5-A Classification Wire color Connector pin No. Application Brown Power supply (+V) Operation selection/ DC White stopping light emission (-G only) Blue Power supply ( V) Output Note: The above M8 and M Connectors made by OMR are IP67. Do not use them in an environment where IP69K is required. Nomenclature Sensors with Sensitivity Adjustment and Operation Selector Through-beam Models EZM-CT@@ (Receiver) Retro-reflective Models EZM-CR@@ Diffuse-reflective Models EZM-CD@@ Infinite Adjustment Emitter BGS Reflective Models EZM-CL@@H Through-beam Models EZM-CT@@ (Emitter) Stability indicator (Green) Operation selector Operation indicator (Yellow) Sensitivity adjuster Stability indicator (Green) or Emitter power supply indicator (Green) Operation indicator (Yellow) Note: Emitter: No indicator Oil-resistant, Robust, Compact Photoelectric Sensor EZM-C
13 Safety Precautions Refer to Warranty and Limitations of Liability on page. WARNING This product is not designed or rated for directly or indirectly ensuring safety of persons. Do not use it for such a purpose. CAUTI Do not use the product with voltage in excess of the rated voltage. Excess voltage may result in malfunction or fire. Never use the product with an AC power supply. Otherwise, explosion may result. When cleaning the product, do not apply a high-pressure spray of water to one part of the product. Otherwise, parts may become damaged and the degree of protection may be degraded. High-temperature environments may result in burn injury. Precautions for Safe Use The following precautions must be observed to ensure safe operation of the Sensor. Operating Environment Do not use the Sensor in an environment where explosive or flammable gas is present. Connecting Connectors Be sure to hold the connector cover when inserting or removing the connector. Be sure to tighten the connector lock by hand; do not use pliers or other tools. If the tightening is insufficient, the degree of protection will not be maintained and the Sensor may become loose due to vibration. The appropriate tightening torque is.9 to.9 N m for M metal connectors and. to. N m for M8 metal connectors. Do not use a load that exceeds the rated load. Low-temperature Environments Do not touch the metal surface with your bare hands when the temperature is low. Touching the surface may result in a cold burn. Rotation Torque for Sensitivity Adjustment and Selector Switch Adjust with a torque of.6 N m or less. Environments with Cleaners and Disinfectants (e.g., Food Processing Lines) Do not use the Sensor in environments subject to cleaners and disifectants. They may reduce the degree of protection. Modifications Do not attempt to disassemble, repair, or modify the Sensor. Outdoor Use Do not use the Sensor in locations subject to direct sunlight. Cleaning Do not use thinner, alcohol, or other organic solvents. Otherwise, the optical properties and degree of protection may be degraded. Surface Temperature Burn injury may occur. The Sensor surface temperature rises depending on application conditions, such as the ambient temperature and the power supply voltage. Use caution when operating or performing maintenance on the Sensor. Precautions for Correct Use Do not use the Sensor in any atmosphere or environment that exceeds the ratings. Do not install the Sensor in the following locations. () Locations subject to direct sunlight () Locations subject to condensation due to high humidity () Locations subject to corrosive gas () Locations where the Sensor may receive direct vibration or shock Connecting and Mounting () The maximum power supply voltage is VDC. Before turning the power, make sure that the power supply voltage does not exceed the maximum voltage. () Laying Sensor wiring in the same conduit or duct as high-voltage wires or power lines may result in malfunction or damage due to induction. As a general rule, wire the Sensor in a separate conduit or use shielded cable. () Use an extension cable with a minimum thickness of. mm and less than m long. () Do not pull on the cable with excessive force. (5) Pounding the Photoelectric Sensor with a hammer or other tool during mounting will impair water resistance. Also, use M screws. (6) Mount the Sensor either using the bracket (sold separately) or on a flat surface. (7) Be sure to turn the power supply before inserting or removing the connector. Cleaning Never use thinner or other solvents. Otherwise, the Sensor surface may be dissolved. Power Supply If a commercial switching regulator is used, ground the FG (frame ground) terminal. Power Supply Reset Time The Sensor will be able to detect objects ms after the power supply is tuned. Start using the Sensor ms or more after turning the power supply. If the load and the Sensor are connected to separate power supplies, be sure to turn the Sensor first. Turning the Power Supply Output pulses may be generated even when the power supply is. Therefore, it is recommended to first turn the power supply for the load or the load line. Short-circuit Protection This Sensor is equipped with load short-circuit protection, but be sure to not short circuit the load. Be sure to not use an output current flow that exceeds the rated current. If a load short circuit occurs, the output will turn, so check the wiring before turning the power supply again. The short-circuit protection circuit will be reset. The load shortcircuit protection will operate when the current flow reaches.8 times the rated load current. When using a capacitive load, use an inrush current of.8 times the rated load current or lower. Water Resistance Do not use the Sensor in water, rainfall, or outdoors. Oil-resistant, Robust, Compact Photoelectric Sensor EZM-C
14 When disposing of the Sensor, treat it as industrial waste. Mounting Diagram Use a mounting torque of.5 N m max. Mounting Bracket (sold separately) E9-L Oil Resistance The Sensor has passed oil resistance testing for the oils listed in the following table. Use this table as a guide when considering lubricants and cutting oils. Test oil type Product name Kinetic viscosity at C (mm /s) ph (dilution rate) Lubricants Velocity Oil No Non-water-soluble cutting oils Yushiron Oil No. AC Less than --- Yushiroken EC5T. ( ) Yushiroken EC5T5 9.9 ( ) Yushiroken S6D 9.9 ( 5) Yushiroken S5N 8.6 ( 5) Yushiron Lubic HWC68 9. ( ) Yushiroken Synthetic Water-soluble 9.9 ( ) #77TG --- cutting oils Emulcut FA-9ST 9.7 ( ) Multicool CSF ( ) Sugicut CS-68JS- 9.6 ( ) Toyocool A ( ) Gryton 7 9. ( ) Gryton 7D 9. ( ) Note:. The Sensor was immersed in the above oils for h at 55 C and then passed an insulation resistance test at MΩ.. Use the kinetic viscosities and phs in the above table as a guide when using the Sensor in environments containing oils not listed in the table. Additives in the oil may also affect performance. Always test applicability in advance. Oil-resistant, Robust, Compact Photoelectric Sensor EZM-C
15 Dimensions Sensors Through-beam Models Pre-wired Models EZM-CT6 EZM-CT8 EZM-CT6B EZM-CT8B Emitter Optical axis Power indicator (green) Two, M -dia. vinyl-insulated round cable with or conductors (Conductor cross section:. mm, Insulator diameter:. mm), Standard length: m M Pre-wired Connector (EZM-@@@-MTJ) *-dia. vinyl-insulated round cable with conductors, Standard length:. m.7 M Terminal No. Specifications +V Light emission stop input (-G only) V --- Optical axis Receiver Operation selector Sensitivity adjuster.8 Operation indicator (yellow) Stability indicator (green) M Pre-wired Connector (EZM-@@@-MTJ) *-dia. vinyl-insulated round cable with conductors, Standard length:. m Two, M -dia. vinyl-insulated round cable with conductors (Conductor cross section:. mm, Insulator diameter:. mm), Standard length: m M Terminal No. Specifications +V --- V Output Through-beam Models Connector Models EZM-CT66 EZM-CT86 EZM-CT67B EZM-CT87B Emitter Optical axis.8 Operation indicator (green) Two, M8 M Terminal No. Specifications +V Light emission stop input (-G only) V --- Receiver Optical axis Operation indicator (yellow) Stability indicator (green) Lens Operation selector Sensitivity adjuster Two, M8 M Terminal No. Specifications +V --- V Output Oil-resistant, Robust, Compact Photoelectric Sensor EZM-C 5
16 Retro-reflective Models Pre-wired Models EZM-CR6 EZM-CR8 Diffuse-reflective Models Pre-wired Models EZM-CD6 EZM-CD8 Receiver Optical axis.5 Emitter Operation selector Sensitivity adjuster.8 Operation indicator (yellow) Stability indicator (green) Two, M -dia. vinyl-insulated round cable with conductors (Conductor cross section:. mm, Insulator diameter:. mm), Standard length: m.5 M Pre-wired Connector (EZM-@@@-MTJ) *-dia. vinyl-insulated round cable with conductors, Standard length:. m.7 M Terminal No. Specifications +V --- V Output Retro-reflective Models Connector Models EZM-CR66 EZM-CR86 Diffuse-reflective Models Connector Models EZM-CD67 Receiver Optical axis Operation selector Sensitivity adjuster.8 Operation indicator (yellow) Stability indicator (green) EZM-CD Terminal No. Specifications Emitter +V.7 Two, M8 --- M V Output BGS Reflective Models Pre-wired Models EZM-CL6H EZM-CL6H EZM-CL6H EZM-CL8H EZM-CL8H EZM-CL8H Receiver Optical axis.5 Emitter Operation indicator (yellow) Stability indicator (green) Two, M -dia. vinyl-insulated round cable with conductors (Conductor cross section:. mm, Insulator diameter:. mm), Standard length: m M Pre-wired Connector (EZM-@@@-MTJ) *-dia. vinyl-insulated round cable with conductors, Standard length:. m.7 M Terminal No. Specifications +V Operation selection V Output BGS Reflective Models Connector Models EZM-CL66H EZM-CL67H EZM-CL69H EZM-CL86H EZM-CL87H EZM-CL89H Receiver Optical axis Operation indicator (yellow) Stability indicator (green) Emitter.7 Two, M8 M Terminal No. Specifications +V Operation selection V Output 6 Oil-resistant, Robust, Compact Photoelectric Sensor EZM-C
17 MEMO Oil-resistant, Robust, Compact Photoelectric Sensor EZM-C 7
18 MEMO 8 Oil-resistant, Robust, Compact Photoelectric Sensor EZM-C
19 MEMO Oil-resistant, Robust, Compact Photoelectric Sensor EZM-C 9
20 READ AND UNDERSTAND THIS DOCUMENT Please read and understand this document before using the products. Please consult your OMR representative if you have any questions or comments. WARRANTY OMR s exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMR. OMR MAKES NO WARRANTY OR REPRESENTATI, EXPRESS OR IMPLIED, REGARDING N-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER AC KNOWLEDGES THAT THE BUYER OR USER ALE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMR DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIS OF LIABILITY OMR SHALL NOT BE RESPSIBLE FOR SPECIAL, INDIRECT, OR CSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED CTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall responsibility of OMR for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMR BE RESPSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMR S ANALYSIS CFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CTAMINATI, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATI OR REPAIR. SUITABILITY FOR USE THE PRODUCTS CTAINED IN THIS DOCUMENT ARE NOT SAFETY RATED. THEY ARE NOT DESIGNED OR RATED FOR ENSURING SAFETY OF PERSS, AND SHOULD NOT BE RELIED UP AS A SAFETY COMPENT OR PROTECTIVE DEVICE FOR SUCH PURPOSES. Please refer to separate catalogs for OMR's safety rated products. OMR shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer s application or use of the product. At the customer s request, OMR will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATI INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMR PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. PERFORMANCE DATA Performance data given in this document is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMR s test conditions, and the users must correlate it to actu al application requirements. Actual performance is subject to the OMR Warranty and Limitations of Liability. CHANGE IN SPECIFICATIS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the product may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMR representative at any time to confirm actual specifications of purc hased products. DIMENSIS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. ERRORS AND OMISSIS The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assum ed for clerical, typographical, or proofreading errors, or omissions. PROGRAMMABLE PRODUCTS OMR shall not be responsible for the user s programming of a programmable product, or any consequence thereof. COPYRIGHT AND COPY PERMISSI This document shall not be copied for sales or promotions without permission. This document is protected by copyright and is intended solely for use in conjunction with the product. Please notify us before copying or reproducing this document in any manner, for any other purpose. If copying or transmitting this document to another, please copy or transmit it in its entirety. Cat. No. E8-E- OMR Corporation Industrial Automation Company ALL DIMENSIS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by. 97. To convert grams into ounces, multiply by.57. Technology Development Center H.Q. Integration Strategy & Business Development Center Shiokoji Horikawa, Shimogyo-ku, Kyoto, 6-85 Japan Tel: (8)75--7/Fax: (8) In the interest of product improvement, specifications are subject to change without notice. Regional Headquarters OMR ASIA PACIFIC PTE. LTD. 8 Clemenceau Avenue, #-, UE Square, 99 Singapore Tel: (65)685-/Fax: (65)685-7 OMR EUROPE B.V. Wegalaan 67-69, NL- JD Hoofddorp The Netherlands Tel: ()56-8-/Fax: () OMR ELECTRICS LLC East Commerce Drive, Schaumburg, IL 67 U.S.A. Tel: () /Fax: () OMR (CHINA) CO., LTD. Room, Bank of China Tower, Yin Cheng Road (M), Shanghai, China Tel: (86)-57-/ Fax: (86)-57- Authorised Distributors:- ASH & ALAIN INDIA PVT LTD S-, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-(India) Tel : Fax : sales@ashalain.com 6
Photoelectric Sensor for the Automotive and Machine Tool Industries
Oil-resistant, Robust, Compact Photoelectric Sensor EZM-C CSM_EZM-C_DS_E Photoelectric Sensor for the Automotive and Machine Tool Industries Oil-resistant, rugged body made of stainless steel. Spot visibility
More informationThrough-beam pre-wired E3F1-TN11 2M *1 E3F1-TP11 2M *1 15 m. pre-wired E3F1-RN11 2M E3F1-RP11 2M 0.1 to 3 m
Photoelectric sensor in compact M8 housing EF M8 size Photoelectric sensor with best value at competitive price Bright visible red LED enabling easy alignment Compact and robust housing for easy integration
More informationLong Sensing-distance Capacitive Separate Amplifier Proximity Sensor E2J-W10MA 1M E2J-W20MA 1M. E2J-JC4A Amplifier Unit
Long Sensing-distance Capacitive Separate Amplifier Proximity Sensor Flat Capacitive Sensor with Separate Amplifier Ideal for Mounting on Robot Hands. Flat head is only 5.5-mm thick. Robotics cable ensures
More informationE2K-X4ME1 2M E2K-X4ME2 2M
Cylindrical Proximity Sensor EK- CSM_EK-_DS_E 1 General-purpose Threaded Sensor That Detects Metals and Non-metals Alike Detects both metallic and nonmetallic objects (water, oil, glass, plastic, etc.).
More informationPhotoelectric Sensor
Photoelectric Sensor Small General-purpose Photoelectric Sensor with Built-in Power Supply Built-in amplifier accepts wide supply voltage range. Slim, space-saving construction measures only 50 x 50 x
More informationE2EZ-X2D1-N 2M E2EZ-X2D2-N 2M
Chip-immune Inductive EEZ CSM_EEZ_DS_E Chip-immune Inductive Correct operation even with aluminum or iron chips sticking to the. Only the sensing object is detected. Pre-wired Smartclick Connector s also
More informationE3S-GS/VS. Both Red-light Models and Greenlight Models to Detect a Wide Variety of Colors. Small Spot/Mark Sensor with Built-in Amplifier
Small Spot/Mark Sensor with Built-in Amplifier CSM_E3S-GS_VS_DS_E_2_1 Both Red-light Models and Greenlight Models to Detect a Wide Variety of Colors Be sure to read Safety Precautions on page. Ordering
More informationE2EC. High-sensitivity DC 2-Wire Sensors and Subminiature Sensors with Long-distance Detection. Cable Amplifier Proximity Sensor. Ordering Information
Cable Amplifier Proximity Sensor EEC CSM_EEC_DS_E High-sensitivity DC -Wire Sensors and Subminiature Sensors with Long-distance Detection Shielded Sensor Heads from -mm to M diameters that can be embedded
More information250 mm 1 m. Name Sensing distance Model Quantity Remarks 250 mm E39-R6 1 Supplied with the product. Reflectors 1 m [250 mm] * E39-R
Transparent Bottle Sensor ES-CR62/67 CSM_ES-CR62_67_DS_E Ideal for Detecting Transparent Glass and Plastic Containers Reliably detects narrow 5-mm gaps between bottles (When using the E9-R6). Significantly
More informationNPN output. 200 mm. Type Cable length Model Remarks
Retroreflective Photomicrosensor with Lens CSM DS_E_5_2 Photomicrosensor with light modulation for reduced external light interference. Easy adjustment and optical axis monitoring with a light indicator.
More informationNPN output PNP output Cord connection Cord length: 2 m Through-beam 7 m Light-ON. 2 m. (selectable by wiring) Diffuse reflective 0.
Built-in Amplifier Photoelectric Sensor E3V3 Easy-to-use, Low-cost Photoelectric Sensor Incorporating s that can be clearly seen from a distance. A series of models with an M8 metal junction connector
More informationE3Z-G. Photoelectric Sensor with Grooved Design and Easy Settings. Grooved-type Photoelectric Sensor with Built-in Amplifier. Ordering Information
Grooved-type with Built-in Amplifier EZ-G CSM_EZ-G_DS_E_9_ with Grooved Design and Easy Settings Groove-type with groove width of 5 mm. Models are available with one or two light axes. Models are available
More informationAppearance Sensing/Setting range Model mm Min. setting. Setting range 40 to 200 mm Max. setting. 5 to 200 mm. 50 mm Setting range
Authorised Distributors:- ASH & ALAIN INDIA PVT LTD S-1, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-11(India) Tel : 11-43797575 Fax : 11-43797574 E-mail : sales@ashalain.com -settable Photoelectric
More informationE3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A CSM_ES-A_DS_E Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection
More informationE2K-F. Flat Capacitive Sensor with a Thickness of Only 10 mm. Flat Proximity Sensor. Ordering Information. Sensors [Refer to Dimensions on page 4.
Flat Proximity Sensor EK-F CSM_EK-F_DS_E Flat Capacitive Sensor with a Thickness of Only mm Flat Sensor with excellent space efficiency. (Model with built-in Amplifier is only mm thick.) Direct mounting
More informationPhotoelectric Sensor for the Automotive and Machine Tool Industries
Oil-resistant, Robust, Compact Photoelectric Sensor EZM-C CSM_EZM-C_DS_E 9 Photoelectric Sensor for the Automotive and Machine Tool Industries Oil-resistant, rugged body made of stainless steel. Spot visibility
More informationBGS (at min. setting) BGS (at max. setting)
Compact Photoelectric Sensor with Built-in Amplifier EZ-LS CSM_EZ-LS_DS_E_7_ Distance-settable Sensor Unaffected by Workpiece Color and Background Distance-settable triangulation model unaffected by color.
More informationReliable Detection Unaffected by PCB Holes or Notches. PCB Sensors. Ordering Information. Sensors [Refer to Dimensions on page 4.
PCB Sensors ES-LS@ CSM_ES-LS DS_E_5_2 Reliable Detection Unaffected by PCB Holes or Notches High-limit ES-LS@ is suitable for incorporation in devices. Wide-range ES-LS@W is ideal for detecting tall components
More informationE3F3. onlinecomponents.com. Ordering Information. Photoelectric Sensor
Photoelectric EF Threaded Cylindrical Photoelectric with Built-in Amplifier for Use as an Optical Proximity High Noise-immunity with Photo-IC Technology Up-to-date photo-ic to increase noise immunity.
More informationOil-resistive, Long-range Photoelectric Sensor with Metal Housing
Oil-resistive, Long-range with Metal Housing ES-C Water- and Oil-resistive with Metal Housing Used for Long-range Sensing Satisfies the water- and oil-resistive requirements and safe enough for use in
More informationMini Photoelectric Sensor
Mini Photoelectric Sensor High cost-performance Mini Photoelectric Sensor Saves Installation Space and Wiring Effort and Detects Minute Sensing Objects Pin-point beam (1 to 2-mm dia.) makes it possible
More informationShape Model Measurement range Model Straight 50 to 300 mm. Straight 70 to 800 mm
Digital Amplifier Ultrasonic Sensor CSM DS_E_1_1 A Reflective Sensor That Handles All Types of Sensing Object Colors and Patterns Compact with a Broad Selection of Side-view Heads Slim with analog outputs
More informationE3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection method Sensing
More informationE2EC. Subminiature Sensors with Long-distance Detection. Cable Amplifier Proximity Sensor. Ordering Information
Cable Amplifier Proximity Sensor EEC CSM_EEC_DS_E_8_ Subminiature Sensors with Long-distance Detection Shielded Sensor Heads from -mm to M diameters that can be embedded in metal. Robotics cables provided
More informationPhotoelectric Sensor. Threaded Cylindrical Photoelectric Sensors with Built-in Amplifier for Use as an Optical Proximity Sensor
Photoelectric Sensor Threaded Cylindrical Photoelectric Sensors with Built-in Amplifier for Use as an Optical Proximity Sensor M1 DIN-sized cylindrical housing Housing materials: plastic, nickel-brass,
More informationE3Z-LT/LR/LL. Compact and Reliable Laser Photoelectric Sensor. Compact Laser Photoelectric Sensor with Built-in Amplifier.
Compact Laser Photoelectric Sensor with Built-in Amplifier EZ-LT/LR/LL Compact and Reliable Laser Photoelectric Sensor Safety and reliability with laser class (JIS and IEC). Product lineup includes models
More informationEE-SX97 40% Built-in connector enables downsizing and easier connection. Protective circuit for safe operation. Slot-type Photomicrosensor.
Slot-type Photomicrosensor EE-SX CSM_EE-SX_DS_E Built-in connector enables downsizing and easier connection. Protective circuit for safe operation. A built-in connector minimizes the shape and dimensional
More informationModel NPN output PNP output Standard. configuration
Slot-type Photomicrosensor (Non-modulated) *1 EE-SX4/6 CSM_EE-SX4_6_DS_E 1 Global Standard Slot-type photomicrosensors with 0- to 100-mA direct switching capacity. Series includes models that enable switching
More informationAluminum-detecting Proximity Sensor (Separate Amplifier Type)
Aluminum-detecting Proximity Sensor (Separate Amplifier Type) ECY Simple Teaching Function for Simple Adjustment. Easy-to-see Excess Gain Level Indicators. Detects aluminum, copper, and other non-ferrous
More informationE3Z. The New Standard for Compact, Long-range Photoelectric Sensors Conserves Energy and Natural Resources, One Million Sold Yearly
Compact Photoelectric Sensor with Built-in Amplifier EZ The New Standard for Compact, Long-range Photoelectric Sensors Conserves Energy and Natural Resources, One Million Sold Yearly Long sensing distance
More informationOil-resistant, Long-range Photoelectric Sensor with Metal Housing
Oil-resistant, Long-range Photoelectric Sensor with Metal Housing ES-C Water- and Oil-resistant Photoelectric Sensor with Metal Housing Used for Longrange Sensing Excellent resistance against the water
More informationModel Sensing method Appearance Connection method Sensing distance
Compact Sensor with Amplifier EZ The New Standard for Compact, Long-range Conserves Energy and Natural Resources Long sensing distance of 5 m for Through-beam Models, m for Retro-reflective Models, and
More informationProximity Sensor Ideal for High Temperatures and Cleaning Processes. Applicable to 120 C
Proximity Ideal for High Temperatures and Cleaning Processes EEH CSM_EEH_DS_E Proximity Ideal for the Food and Beverage Industry SUS6L Body, IP69K Protection, Resistant to High Temperatures and Detergents
More informationStainless Steel Housing E3ZM. Designed for the Food Industry. Hygienic, Durable, and Detergent Resistant. 316L Stainless Steel Housing.
Stainless Steel Housing Compact Photoelectric with Built-in Amplifier EZM Designed for the Food Industry. Hygienic, Durable, and Detergent Resistant. 6L Stainless Steel Housing. IP69K Photoelectric s EZM
More informationHandheld Reader Writer
Handheld Reader Writer CH1D-V2 A Compact Lightweight Easy-to-use Pen-type Reader Writer. Connects directly to a personal computer or PLC via RS-232C. The Reader Writer s protective construction is IP63
More informationEE-SX91. Meeting Customer Needs with Compact Sensors that Mount with M3 Screws
Compact Pre-wired Photomicrosensor with Built-in Amplifier (Non-modulated) CSM DS_E_7_1 Meeting Customer Needs with Compact Sensors that Mount with M Screws Both light-on and dark-on outputs provided.
More informationSensing method Appearance Connection method Sensing distance Part number NPN output PNP output Through-beam Prewired (2 m) E3Z-T61A E3Z-T81A 10 m
Through-Beam Sensor with Visible Red LED Visible Beam Allows Visual Confirmation of the Detection Spot, for Easy Installation and Maintenance Built-in amplifier Mutual interference protection filter included
More informationLight ON 5m. * Light ON. 2.5m (3m) Light ON. (5m)
All voltage photoelectric sensors Built-in amplifier accepts wide supply voltage range. Slim, space-saving construction measures only x x 7.4 mm. s with long life expectancy and high switching capacity
More informationEE-SX77/87. Slim, Compact Photomicrosensor that is still easy to use. Photomicrosensor with Slim Cable (Non-modulated) Ordering Information
Photomicrosensor with Slim Cable (Non-modulated) EE-SX77/87 CSM_EE-SX77_87_DS_E_7_2 Slim, Compact Photomicrosensor that is still easy to use. Compact, thin profile enables dense mounting. Indicator is
More informationOil-resistant, Long-range Photoelectric Sensor with Metal Housing
Oil-resistant, Long-range Photoelectric Sensor with Metal Housing ES-C CSM_ES-C_DS_E_9_2 Water- and Oil-resistant Photoelectric Sensor with Metal Housing Used for Longrange Sensing Excellent resistance
More informationAppearance Sensing/Setting range Model. Setting range Max. setting 50 to 500 mm. 40 to 200 mm. 200 mm. Sensing range. 5 to 200 mm
-settable Photoelectric Sensor with Metal Case E3S-CL CSM_E3S-CL_DS_E 2 Simply Set the to Reliably Detect Workpieces of Various Colors Reliable detection regardless of color or material. Black/white error
More informationAluminum Excellent Performance, with Aluminum Chip Immunity! The indicator is visible from any direction.
All Metals and Long- Types CSM DS_E and Both Detectable from Long Distances times the aluminum detection of previous models Twice the max. Equipped with a function to prevent the detection of aluminum
More informationE2EM. Long-distance Proximity Sensor. Ordering Information. Safe Mounting with Greater Sensing Distance and Easy Wiring with No Polarity
Long-distance Proximity Sensor Safe Mounting with Greater Sensing Distance and Easy Wiring with No Polarity Ensures a sensing distance approximately 1.5 to 2 times larger than that of any conventional
More informationF3W-E. Compact Body, High-visibility Indicators, and Ideal for Picking Systems for Small Parts. Picking Sensor. Features
Picking Sensor FW-E CSM_FW-E_DS_E Compact Body, High-visibility Indicators, and Ideal for Picking Systems for Small Parts. A variety of part sizes can be handled: FW-D sensing width: 00 mm, FW-E sensing
More informationLong-distance Photoelectric Sensor with Built-in Amplifier. Connection method Sensing distance. --- Retro-reflective. (500 mm) Terminal block ---
Long-distance Photoelectric Sensor with Built-in Amplifier EG CSM_EG_DS_E_ _ Line of Long-distance Photoelectric Sensors for Large Workpieces Includes Retroreflective Models with Sensing Distance of m
More informationPower supply voltage Output configuration Output phases Resolution (pulses/rotation) Model. 100, 200, 360 E6A2-CWZ5C (resolution) 0.
Incremental 25-mm-dia. Rotary Encoder CSM DS_E_5_1 Compact Encoder with External Diameter of 25 mm Incremental model External diameter of 25 mm. Resolution of up to ppr. Be sure to read Safety Precautions
More informationE3Z-LT/LR/LL. Compact and Reliable Laser Photoelectric Sensor. Compact Laser Photoelectric Sensor with Built-in Amplifier.
Compact Laser Photoelectric Sensor with Built-in Amplifier EZ-LT/LR/LL Compact and Reliable Laser Photoelectric Sensor Safety and reliability with laser class (JIS and IEC). Product lineup includes models
More informationStainless Steel Case E3ZM. Compact Photoelectric Sensor with Built-in Amplifier
Stainless Steel Case Compact Photoelectric Sensor with Built-in Amplifier EZM Standard Quality for the Food Industry. Hygienic, Durable, and Detergent Resistant. Reliability Concentrated in a Compact Steel
More informationE2EY. A Proximity Sensor for Aluminum, Brass and Other Non-ferrous Metals. Iron Is Not Detected. Aluminum-detecting Proximity Sensor
Aluminum-detecting Proximity Sensor EEY CSM_EEY_DS_E_5_1 A Proximity Sensor for Aluminum, Brass and Other Non-ferrous Metals. Iron Is Not Detected. Non-ferrous metals, such as aluminum and brass, are detected.
More informationEE-SX91. Meeting Customer Needs with Compact Sensors that Mount with M3 Screws
Compact Pre-wired Photomicrosensor with Built-in Amplifier (Non-modulated) EE-SX9 CSM_EE-SX9_DS_E Meeting Customer Needs with Compact Sensors that Mount with M Screws Both light-on and dark-on outputs
More informationE2EZ-X2D1-N 2M E2EZ-X2D2-N 2M
Chip-immune Inductive EEZ CSM_EEZ_DS_E Chip-immune Inductive Correct operation even with aluminum or iron chips sticking to the. Only the sensing object is detected. Pre-wired Smartclick Connector s also
More informationOutput configuration Contact form Operation indicator Cable length Model PNP open collector. 1 m D5F-2B10 (+ common) ON when operated
High-precision Optical Switch D5F CSM_D5F_DS_E_2_2 Optical System Achieves 1-μm Operating Position Repeatability in this 4-way Switch No-contact structure for high reliability. Ceramic materials in measuring
More informationE2KQ-X. Fluororesin-coated Capacitive Sensor with Sensitivity Adjuster. Chemical-resistant Proximity Sensor. Ordering Information
Chemical-resistant Proximity Sensor E2KQ-X CSM_E2KQ-X_DS_E_4_3 Fluororesin-coated Capacitive Sensor with Sensitivity Adjuster Excellent resistance against chemicals and oil with fluororesincoated case.
More informationE3X-SD. Easy-teach digital fiber amplifier. Ordering Information. Amplifier Unit Connectors (sold separately) Accessories (sold separately)
Easy-teach digital fiber amplifier EX-SD The EX-SD easy-teach fiber amplifier is the ideal solution for all standard fiber applications. The one-button teaching and/ or the simple threshold adjustment
More informationConductive Level Controller
Conductive Level Controller 61F-D21T-V1 Ideal for level control for industrial facilities and equipment. Outputs can be set to self-hold at ON or OFF using self-holding circuits. Sensitivity adjustment
More informationE2K-F. Flat Capacitive Sensor with a Thickness of Only 10 mm. Flat Proximity Sensor. Ordering Information. Sensors [Refer to Dimensions on page 4.
Flat Proximity Sensor EK-F CSM_EK-F_DS_E Flat Capacitive Sensor with a Thickness of Only mm Flat Sensor with excellent space efficiency. (Model with built-in Amplifier is only mm thick.) Direct mounting
More informationIntelligent Flag Amplifier
V0 RFID System V0-HAM42-DRT Intelligent Flag Amplifier for CompoBus/D System Configuration Master Unit Master Unit CompoBus/D ( -compatible) I/O I/O V0-HAM42-DRT (Amplifier) V0-HS@@ (Sensors) V0-D@@ (Data
More informationE3X-NA. Adjuster type standard that is the culmination of true ease and simplicity. Super Manual Fiber Amplifier. Features
Super Manual Fiber Amplifier Adjuster type standard that is the culmination of true ease and simplicity Features Self-explanatory LED bar displays of light levels The previous manual type used the stability
More informationD5B. Detects Objects in Multiple Directions with High Sensitivity, Ideal for Robotics. Mechanical Touch Switch. Model Number Structure
Mechanical Touch Switch D5B CSM_D5B_DS_E_3_2 Detects Objects in Multiple Directions with High Sensitivity, Ideal for Robotics Slow-action switching mechanism used. Gold-plated contact with coil spring
More informationG3S4-A 5 VDC 12 VDC 24 VDC 0.6 A at 75 to 264 VAC (See note 1.) G3S4-A1 5 VDC 12 VDC 24 VDC Yes G3SD-Z01P-PD 1 A at 3 to 26 VDC (See note 2.
Terminal SSR G3S CSM_G3S_DS_E_7_ Compact Terminal SSR with Outputs Easy-to-use SSR block that combines four compact G3S SSRs, sockets, and heat sink in one unit. Easy wiring with separate I/O terminal
More informationPhotoelectric Sensor
Photoelectric Sensor Small General-purpose Photoelectric Sensor with Built-in Power Supply Built-in amplifier accepts wide supply voltage range. Slim, space-saving construction measures only 50 x 50 x
More informationTime-limit operation/ self-resetting DPDT --- H3M H3M with Y92F-40 adapter SPDT SPDT H3M-H H3M-H with Y92F-40 adapter
Solid-state Timer Solid-state Timer with Variable Time Ranges Four time ranges are selectable per timer unit. Wide timing range of 0.05 second to 30 hours can be covered by a combination of five timer
More informationpre-wired E3FC-TN11 2M *1 E3FC-TP11 2M *1
Photoelectric sensors in M8 stainless steel housing EFC Best durability for wash-down applications High grade steel housing (SUS6L) Withstands heat shock conditions Epoxy resin preventing water ingress
More informationSmart Sensors (with Ultra-High-Speed CCD Camera) ZFV Series
Smart Sensors (with Ultra-High-Speed CCD Camera) ZFV Series Ordering Information Sets of Sensor Head and Amplifier Unit Type NPN Narrow View/Single Function ZFV-R1010 ZFV-R1015 Narrow View/Standard ZFV-R1020
More informationE2EC. Subminiature Sensors with Long-distance Detection. Cable Amplifier Proximity Sensor. Ordering Information
Cable Amplifier Proximity Sensor EEC CSM_EEC_DS_E_9_ Subminiature Sensors with Long-distance Detection Shielded Sensor Heads from -mm to M diameters that can be embedded in metal. Robotics cables provided
More informationE2EZ-X2D1-N 2M E2EZ-X2D2-N 2M
Chip-immune Inductive EEZ CSM_EEZ_DS_E_6_ Chip-immune Inductive Correct operation even with aluminum or iron chips sticking to the. Only the sensing object is detected. Pre-wired Smartclick Connector s
More informationE3FZ/E3FR. Easy mounting photoelectric sensor in short M18 housing. Features. Easy and fast installation
Easy mounting photoelectric sensor in short M8 housing Secure-click snap mounting for fast installation High power LED for enhanced sensing distance Short housing with less than mm length Minimal optical
More informationThread length. 27 (40) mm. 27 (44) mm. 27 (40) mm. 34 (50) mm. 34 (49) mm. 39 (60) mm. 39 (54) mm. 44 (65) mm. 44 (59) mm
Long Distance Cylindrical. Extra long for increased protection and sensing performance triple proximity sensors for flush mounting requirements. designed and tested for extra long life. Ordering Information
More informationOrdering Information. I/O Relay G7T. Model Number Legend Slim-styled I/O Relay Saves Space in Panel
I/O Relay CSM DS_E_2_ Slim-styled I/O Relay Saves Space in Panel SPST-NO, SPST-NC, and SPDT contact forms available for output (SPST-NO only for input). Ultra-slim housing measuring 29 (W) x 0 (D) x 2
More information(75 to 264 VAC) 12 VDC 24 VDC No 5 VDC G3MC-202PL 12 VDC 24 VDC
Solid State Relay G3MC Compact, Thin-profile, Low-cost SSR with Reinforced Insulation Small bottom surface area (approx. 80% of the conventional G3MB s), ideal for close PCB mounting. DC input and AC output
More informationThread length (overall length)
Cylindrical Proximity Sensor E2A Safe Mounting with Greater Sensing Distance Ensures a sensing distance approximately 1. to 2 times larger than that of any conventional OMRON Sensor. Problems such as the
More informationModel Number Structure
Solid State Relays with Failure Detection Function Refer to Safety Precautions for All Solid State Relays. Detects failures in SSR used for heater temperature control and simultaneously outputs alarm signal.
More informationE2FM. Inductive Proximity Sensor in full metal housing. Application. Continuous Impact Test. Brush Test
Inductive Proximity Sensor in full metal housing Full body stainless steel housing for highest mechanical protection Low frequency modulation for metal chip iunity Flame retardant cable for high protection
More informationEE-SPX74/84. Ordering Information. Compact Sensor for High-Density Mounting with Easy Snap-In Connector. H Connector features a built-in safety
Compact for High-Density Mounting with Easy Snap-In Connector H Connector features a built-in safety lock for shock and vibration resistance H replacement made simple without rewiring H Cables can be bent
More informationMiniature Inductive Prox TL-W
Miniature Inductive Prox Subminiature, Flat-Pack DC Sensor Fits Tight Spaces Watertight construction conforms to IP67 Space-saving mounting area, as small as 10 x 27 mm ( 0.39 x 1.06 in), is ideal for
More informationReflective Photomicrosensor with Sensitivity Adjuster (Non-modulated)
Reflective Photomicrosensor with Sensitivity Adjuster (Non-modulated) /672 SM 672_DS_E_3_1 Photomicrosensor with sensitivity adjuster. Easy adjustment with a built-in sensitivity adjuster. Easy optical
More informationOperation mode. Output configuration. Relay DC SSR. Light-ON Dark-ON (switch selectable) Relay DC SSR. Relay DC SSR
Built-in Power Supply Photoelectric Sensor CSM DS_E_12_3 Model Contribute to Overall Cost Reduction erminal Block Models Easy to wire and adjust. For the most recent information on models that have been
More informationModel Number Structure
Total Counter/Time Counter (DIN 8 x ) CSM DS_E DIN 8 x -mm Total Counter/Time Counter with Easy-to-read Displays and Water and Oil Resistance Equivalent to IP66 High-visibility, negative transmissive LCD
More informationE2A. Ordering Information. Cylindrical Proximity Sensor. Safe Mounting with Greater Sensing Distance. E2A Cylindrical Proximity Sensor 1
Cylindrical Proximity Sensor E2A Safe Mounting with Greater Sensing Distance Ensures a sensing distance approximately 1. to 2 times larger than that of any conventional OMRON Sensor. Problems such as the
More information4 mm. 8 mm. Proximity Sensor. Sensing head Sensing distance Output configuration Part Number M18 Shielded 4 mm DC 3-wire PNP-NO E2EZ-X4B1 M30
Sensing distance Supply voltage Output 4 mm 8 mm 12 to 24 VDC 100 to 220 VAC 200 ma max. 100 ma max. Proximity Sensor Detects Objects without Being Influenced by Aluminum and Cast Iron Cut Chips Sense
More informationModel Number Structure
Solid State Relays CSM DS_E_2_1 I/O SSRs That Mount to OMRON s G7TC I/O Block Input and output modules are available in wide variety. Snaps easily into P7TF I/O Terminals and can be used together with
More informationE3G. Photoelectric switch with built-in amplifier (long distance) in plastic housing. Features
Photoelectric switch with built-in amplifier (long distance) in plastic housing Retroreflective Models Sensing Distance of 10 m, with polarized light to detect shiny objects. stability monitored ba the
More informationInductive Proximity Sensor
Inductive Proximity Sensor Miniature, Slim-styled Proximity Sensor Space-saving Sensor ideal for timing cam and dog detection. Four mounting holes provided: two each mounting from side or rear of the housing.
More informationModel Number Structure
Solid State Relays G3@-VD CSM_G3F_G3FD_DS_E_4_2 International Standards for G3F Series, Same Profile as MY Power Relays Shape-compatible with mechanical relays. Certified by UL, CSA, and VDE (model numbers
More informationPrint mark detection photoelectric sensor in compact stainless steel housing
Print mark detection photoelectric sensor in compact stainless steel housing The detergent resistant photoelectric sensor in a robust stainless steel housing provides reliable detection of all common print
More informationNo. of optical axes. 3 m
Non Safety Picking Sensor Sensing distance of 3 m. Selectable display mode (all lighting, all flashing, elevator-like lighting, accordion-like lighting). Six picking indicators provide a very clear display.
More informationIndicator (Square) Ultra Bright LED Type
New Products Indicator (Square) Ultra Bright LED Type M2S Indicator Series with Square 40-mm Body. New models added with Ultra LEDs. New models with ultra bright LEDs added to singlescreen models. Previous
More informationApplication. Product name. P3-topax-56 (Manufactured by Ecolab) P3-oxonia active 90 (Manufactured by Ecolab) TEK121 (Manufactured by ABC Compounding)
Photoelectric sensor in compact stainless steel housing EZM EZM Compact size SUS 6L housing for highest mechanical protection Tested detergent and chemical resistance (certified by Henkel-Ecolab) Watertight
More informationSlot-type Photomicrosensor with connector or pre-wired models (Non-modulated) *1. configuration. Dark-ON/Light-ON
Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) * EE-SX/6 Photomicrosensor with 0- to 00-mA direct switching capacity for built-in application. Series includes models that
More informationTransparent Object Detection Photoelectric Sensor
New Product Transparent Object Detection Photoelectric Sensor ES-DB Superb Detection of Many Types of Transparent Objects Double slits inside Sensor prevent incorrect operation. P-opaquing function * improves
More informationModel NPN output PNP output Standard. configuration
Slot-type Photomicrosensor (Non-modulated) *1 EE-SX/6 CSM_EE-SX/6_DS_E_1_ Global Standard Slot-type photomicrosensors with 0- to 100-mA direct switching capacity. Series includes that enable switching
More informationModel Number Structure
Digital Panel Meter CSM DS_E_2_1 Easy-to-use, w-cost Digital Panel Meter that Accepts AC Input Compact DIN-size (96 x 48 (W x H)) body. Mounting thickness of only 3.5 mm required. ghly visible display
More information(see note 1) --- E3G-MR19 block ON or OFF delay 0 to 5 s (adjustable)
Authorised Distributors:- ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-110020(India) Tel : 011-43797575 Fax : 011-43797574 E-mail : sales@ashalain.com Long-distance
More informationLong-distance Photoelectric Sensor
Long-distance Photoelectric Sensor Advanced Design with Automatic Teach Function Retroreflective models have a sensing distance of 10 m Teach function up to 2 m diffuse Zone mode for precise sensing M12
More informationOrdering Information. Interface Converter K3SC. List of Models
Interface Converter CSM DS_E 1 A compact converter that allows communications between /USB and RS-/ devices. Ideal for industrial applications. Allows communications between /USB (Universal Serial Bus)
More informationCylindrical Proximity Sensor
Cylindrical Proximity Sensor A New Series of Easy-to-use and Tough Models with a Yellow Indicator New series of TL-X2C1-GE models with improved performance over the previous TL-X-E models. Also, in addition
More informationPhotoelectric Sensor with Built-in Amplifier with New Connector Options E3Z
Photoelectric Sensor with Built-in Amplifier with New Connector Options E3Z Compact Sensor Offers Long Sensing Distance and Superior Noise-Immunity D Photo-IC provides long sensing distance: 15 m and 10
More informationOrdering Information. Compact, High-performance. Micro Displacement Sensor Z4D-F. Accessories (Attached)
Micro Displacement Compact, High-performance Micro Displacement Meets various needs with high performance at the resolution of 5 µm. Numerous applications are possible when the analog output model is integrated
More informationThread length (overall length) material
Cylindrical Proximity Sensor for Mobile Usage Designed and tested to keep your machines moving IP69k tested and certified for highest water resistance e1 type approval (according to automotive directive
More informationE2Q4 Square Proximity Sensor
Inductive Square Slim, compact size M2 Plug-in connection Integrated short circuit and reverse polarity protection Active face positioning: Y-axis 5, X-axis 90 incremets Ordering Information DC type Connection
More information