INTERCOM-ID DESCRIPTION SYSTEM FUNCTIONS

Transcription

1 0 9 Alphanumeric keypad del 0 to 9 INTERPHONE button SOUND button 5 CLOSE button VALIDATION button 8 A 5 B 7 8 CANCEL button FUNCTION button TALK / LISTEN button 9 DISPLAY XLR CONNECTOR (5c) FOR 0 EXTERNAL MICROPHONE SPEAKER 7 5 MICROPHONE DESCRIPTION INTERCOM-500 System enables optical and audible signalling of calls made from different zones and to establish two-way intercom spoken between each intercom and the central. SYSTEM FUNCTIONS Standard call with appeal brief. Visual and acoustic signaling in the standard call control central. Cancellation of the standard call center. Transfer the management of calls between the control centrals. Transfer calls management to a DECT telephone or a switchboard, by module IW-8 (optional). Standard sound call of control central by an external amplifier (optional). INTERCOMS PARTNERS INTERCOM-500 SYSTEM The system allows the connection of two types of intercoms: Intercommunication with previous line and 00 V line transformer by modules IW-50Aand IW-50A. Intercommunication low impedance (passive) by modules IW-50P and IW-50P. EQUIPOS Y SISTEMAS MEGAFONÍA / INTERCOM PUBLIC ADDRESS SYSTEMS Tel.: / ude@udeaudio.com BARCELONA - SPAIN 0.A

2 INTERCOM-500 System SYSTEM COMPOSITION CM- INTERCOM- ID CM- NOTICE MICROPHONE OPTIONAL A 5 B CABLES A SUPPLIED WITH (Lenght: meters) ID-500 Central OPTIONAL IW-8 TELEPHONE INTERFACE A B C INTERPHONE A shielded cable and interlaced with x0, mm² section min. RS-85 A shielded cable and interlaced with x0, mm² section min. CONTINUOUS SUPPLY wires of,50 mm² section min. A B C IW-50A (0 lines) IW-50A (0 lines) IW-50P (0 lines) IW-50P (0 lines) Management and connection module 0 VAC 0.A

3 DIMENSIONS / ACCESSORIES ID-500 Central 7,0 0,0 A 5 B Control central point ID-500 office format, with: Selection of lines and functions keyboard. Alphanumeric LCD display backlit x 0 characters. Built-in electret microphone. Connector for notice microphone CM-. Speaker of receipt. Setting the reception level and the acoustic tone of appeal level. Visual and acoustic signalling calls. Visual indication of the selected area. Alphanumeric keyboard. Its main function is call signalling and management made in different rooms and intercommunication with them as well. Supplied with Transfer Module. 7,0 50,0 55,0 5,0 9,0 By the UdeConf ID-500 software you can configure in the ID-500 central the following parameters: - Name and ID number of the ID-500 desk. - Name of each zone. - Extension number of each zone. - Zones assigned to each desk. - Floor / Group situation zone. - Name of each zone to give the message by telephone interface. 0.A

4 DIMENSIONS / ACCESSORIES ACCESSORIES (OPTIONAL) ID-500 Central TELEPHONE INTERFACE IW-8 telephone interface. It allows you to forward calls to a two threads phone (type DEC) or a PBX to manage incoming calls in the ID- 500 central diverted to the phone. Each ID-500 central can support one IW-8 module. NOTICE MICROPHONE NOTICE MICROPHONE CM- UDE CM- IW-8 FRAMEWORK FOR BUILD-IN ID-500 CENTRAL IW-500 Imprint anchor 00 x 80 mm.,0 0,0 IW-50 BUILD-IN ID-500 CENTRAL (in RACK 9 ) Huella Imprint de anchor Anclaje x x mm.,0 8,0 0.A

5 IW-50A / IW-50A (0 lines) (0 lines) INTERPHONES WITH PREVIOUS LINE IW-50P, AND / DIMENSIONS / ACCESSORIES IW-50P (0 lines) (0 lines) LOW IMPEDANCE INTERPHONES 50,0 70,0 50,0 DEGREE OF PROTECTION: IP- SIDE INDUSTRIAL connection Range UDE IW-50A / IW-50A IR-/ IR-/ SI-0 IR-/ IW-50P / IW-50P IR-/P ACCESSORIES (OPTIONNAL) GENERAL Secund. Secund. Secund. Secund. Secund. 5 Secund. Secund. 7 Secund. 8 Secund. 9 Secund. 0 IW-0A Extension card 0 lines Allows increasing module IW-50A to 0 lines IW-0P Extension card 0 lines Allows increasing module IW-50P to 0 lines 0.A 5

6 SYSTEM OPTIONS A 5 B ID-500 System composed by: ID-500 central Management and connection module Secondary: 0 (maximum) AND IW-50A IW-50A IW-50P IW-50P 0 VAC A 5 B ID-500 System composed by: ID-500 central Management and connection modules Secondary: 0 (maximum) AND 0 VAC IW-50A IW-50A IW-50P IW-50P AND 0 VAC IW-50A IW-50A IW-50P IW-50P A 5 B ID-500 () AND IW-50A IW-50A IW-50P IW-50P 0 VAC A 5 B ID-500 () MODULO ENCIA System composed by: ID-500 centrals Management and connection module Secondary: 0 (maximum) ID-500 centrals Management and connection modules Secondary: 0 (maximum) 0.A