ODOT ITB Section 4: Flashers, Timers, & Software Systems Item 4-1

Transcription

1 ODOT ITB Section 4: Flashers, Timers, & Software Systems Item 4-1

2 DATA SHEET SSF-86-3 ODOT ITB Section 4: Flashers, Timers, & Software Systems Item 4-1 Solid State Flasher: Description: The PDC model SSF-86 solid state flasher is a dual circuit flasher designed for the Traffic Control Industry. This unit is conservatively rated up to 20 A per circuit. The flash rate is flashes per minute and does not vary due to voltage or temperature variations. With the zero voltage switching design, there are no contacts to wear out or deteriorate due to arcing or corrosion. Also, extended life of the bulbs can be expected as well as reduced Radio Frequency Interference (RFI). The extruded aluminum heatsink provides more than adequate heat dissipation. Connector Pinout: Mates with a Beau P-5406-LAB or equivalent Electrical Characteristics: Zero voltage turn on Zero voltage turn off Tungsten Lamp or Gas Tubing Transformer load- Operating Voltage Mechanical V +-5 degrees 0A +-5 degrees Up to 20 A max VAC Length 8.40 inches Width.1.70 inches Height 4.18 inches Weight lbs Operating Temperature : Full load from 35 to +74 degrees C Guarantee: The flasher is fully guaranteed against all failures due to manufacturing defects for two years. P.O. Box 7172 #205, Stateline, NV PH (925) FAX (925)

3 ODOT ITB Section 4: Flashers, Timers, & Software Systems Item 4-2

4 DATA SHEET SSF-86-3 ODOT ITB Section 4: Flashers, Timers, & Software Systems Item 4-2 Solid State Flasher: Description: The PDC model SSF-86 solid state flasher is a dual circuit flasher designed for the Traffic Control Industry. This unit is conservatively rated up to 20 A per circuit. The flash rate is flashes per minute and does not vary due to voltage or temperature variations. With the zero voltage switching design, there are no contacts to wear out or deteriorate due to arcing or corrosion. Also, extended life of the bulbs can be expected as well as reduced Radio Frequency Interference (RFI). The extruded aluminum heatsink provides more than adequate heat dissipation. Connector Pinout: Mates with a Beau P-5406-LAB or equivalent Electrical Characteristics: Zero voltage turn on Zero voltage turn off Tungsten Lamp or Gas Tubing Transformer load- Operating Voltage Mechanical V +-5 degrees 0A +-5 degrees Up to 20 A max VAC Length 8.40 inches Width.1.70 inches Height 4.18 inches Weight lbs Operating Temperature : Full load from 35 to +74 degrees C Guarantee: The flasher is fully guaranteed against all failures due to manufacturing defects for two years. P.O. Box 7172 #205, Stateline, NV PH (925) FAX (925)

5 AP21 TIME SWITCH Industry Standard, Time-Tested School Zone Appliance ODOT ITB Section 4: Flashers, Timers, & Software Systems Item 4-2 The AP21 is a single-circuit, calendar-programmable, solid state time switch. It is primarily designed for switching electric circuits according to a pre-set time and date program. The AP21 auto prompting alpha-numeric display makes programming transfers fast and simple by using our AP21 software on a laptop. The AP21 may be powered from any120vac or 12VDC supply. RTC-Traffic.com contact our team at Info@RTC-Traffic.com for more information TOLL-FREE RTC Manufacturing, Inc., 1016 Enterprise Place, Arlington, Texas RTC Manufacturing, Inc. All Rights Reserved.

6 AP21 TIME SWITCH Industry Standard, Time-Tested School Zone Appliance AP21 SPECIFICATIONS DESCRIPTION Fast and simple programming using our AP21 software on a laptop. DISPLAY KEYBOARD BACK-UP POWER ELECTRICAL CONNECTION OUTPUT POWER TIME BASE SIZE TEMPERATURE RANGE One-line, 16 character alpha-numeric Liquid Crystal Display (LCD) Sixteen-key, positive action push button 48-hour capacitive Terminal block (#12 to #20 AWG) optional CPC connector with harness SPDT relay rated at 15 amps 115 VAC resistive load 0.25 Watt at rest, 0.76 Watt relay ON, 12VDC AC Power = 60Hz line power DC Power = Temperature-compensated crystal with accuracy of +/-.005 seconds/day 7.6"H x 3.7"W x 1.55"D -30 to +74 Celsius AP21 FEATURES One-line, sixteen-character, Liquid Crystal Display (LCD) 16 character, alpha-numeric keypad Automatic Daylight Saving Time (DST) adjustments Time of day entered in 12-hour format Automatic Leap Year compensation 48-hour capacitive memory back-up no batteries to replace The display Auto Prompts the operator through the user-friendly programming process 16 powerful program steps Single Day, Weekend, Week Day, or Every Day programming capability for each program step 10 skip plans each skip plan prevents the time switch output from activating on a specific day or consecutive days SPDT relay output rated at 15 Amps at 115 VAC resistive load Works on 120VAC and 12VDC power sources AP21 ORDERING INFORMATION PART NUMBER DESCRIPTION Single-circuit time switch The AP21 Meets NEMA TS1/TS2 Requirements RTC-Traffic.com contact our team at Info@RTC-Traffic.com for more information TOLL-FREE FAX RTC Manufacturing, Inc., 1016 Enterprise Place, Arlington, Texas RTC Manufacturing, Inc. All Rights Reserved

7 ODOT ITB Section 4: Flashers, Timers, & Software Systems Item 4-3

8

9 ODOT ITB Section 4: Flashers, Timers, & Software Systems Item SERIES Model 254 (Edco ACP-340) 120 VAC Single Phase Surge Protective Device Technical Documentation The ASCO Model 254 filtering surge protector absorbs power line noise and switching transients that other suppressors and RFI filters may pass through. It designed to protect intersection controllers and other sensitive equipment from random time-base, memory loss and other more sever transient related problems. Model 254 can replace the existing EMI filter in the traffic cabinet if high frequency attenuation over 25 MHz is not required. Key Specs Voltage: 120 VAC Current: 10 Amp Connection: 1/4-20 Stainless Steel Lugs Mounting: Flange *See Ordering Information for model number selection General Technical Specifications Operating Voltage Clamping Voltage Operating Current Peak Surge Current Operating Frequency EMI Attenuation SPD Technology Modes of Protection Connection Type Operating Temperature Dimensions (in/mm) Weight (lb/kg) Warranty 120 VAC 395 VAC 10 A 32.5 ka/mode, 65 ka/total 47-63Hz 60 db typ Metal Oxide Varisters (MOV) w/ L-C Filter L-N, N-G 1/4-20 Stainless Steel Stud -40 C to +85 C H x W x L [60.3 x 79.4 x mm] 1lb, 13.5 oz. [ 0.84 kg] 5 years Features Industry-Leading Noise Filtering Nanosecond response time Incorporates series choke 5 Year Warranty V DANGER! Only qualified personnel should install or service this system. Electrical safety pre-cautions must be followed when installing or servicing this equipment. To prevent risk of electrical shock, turn off and lock out all power sources to the unit before making electrical connections or servicing. Seulement le personnel qualifié doit installer ou maintenir ce systéme. Des précautions de sécurité en électricité doivent être suivis lors de l installation ou de la maintenance de cet equipement. Pour eviter tout risque de choc électrique, débranchez et verouiller toutes les sources d alimentation de cet equipement avant de. Caution This product could become excessively hot and rupture in the rare event of power line conditions or surge that exceed its rated operating specifications. Appropriate precautions should be exercised. High voltages are present on electrical termination. Unit should be serviced by qualified personnel only.

10 Installation Instructions Circuit Breaker 10A Max. Cabinet Power AC Hot Bus 120 VAC Input Earth Site Variable (opiton) Main Line Main Neutral Earth Model 254 Ground Line Out Neutral Out Protected Power Source (to controller and other sensitive electronics) Dimensions Ordering Information MODEL Former Model Name NF010AN5NO Edco ACP-340 APPLICATION 120VAC, 10A ASCO Power Technologies th St. North, Clearwater, FL surge.ascopower.com Copyright January Publication ID RevA

11 AP21 TIME SWITCH Industry Standard, Time-Tested School Zone Appliance ODOT ITB Section 4: Flashers, Timers, & Software Systems Item 4-3 The AP21 is a single-circuit, calendar-programmable, solid state time switch. It is primarily designed for switching electric circuits according to a pre-set time and date program. The AP21 auto prompting alpha-numeric display makes programming transfers fast and simple by using our AP21 software on a laptop. The AP21 may be powered from any120vac or 12VDC supply. RTC-Traffic.com contact our team at Info@RTC-Traffic.com for more information TOLL-FREE RTC Manufacturing, Inc., 1016 Enterprise Place, Arlington, Texas RTC Manufacturing, Inc. All Rights Reserved.

12 AP21 TIME SWITCH Industry Standard, Time-Tested School Zone Appliance AP21 SPECIFICATIONS DESCRIPTION Fast and simple programming using our AP21 software on a laptop. DISPLAY KEYBOARD BACK-UP POWER ELECTRICAL CONNECTION OUTPUT POWER TIME BASE SIZE TEMPERATURE RANGE One-line, 16 character alpha-numeric Liquid Crystal Display (LCD) Sixteen-key, positive action push button 48-hour capacitive Terminal block (#12 to #20 AWG) optional CPC connector with harness SPDT relay rated at 15 amps 115 VAC resistive load 0.25 Watt at rest, 0.76 Watt relay ON, 12VDC AC Power = 60Hz line power DC Power = Temperature-compensated crystal with accuracy of +/-.005 seconds/day 7.6"H x 3.7"W x 1.55"D -30 to +74 Celsius AP21 FEATURES One-line, sixteen-character, Liquid Crystal Display (LCD) 16 character, alpha-numeric keypad Automatic Daylight Saving Time (DST) adjustments Time of day entered in 12-hour format Automatic Leap Year compensation 48-hour capacitive memory back-up no batteries to replace The display Auto Prompts the operator through the user-friendly programming process 16 powerful program steps Single Day, Weekend, Week Day, or Every Day programming capability for each program step 10 skip plans each skip plan prevents the time switch output from activating on a specific day or consecutive days SPDT relay output rated at 15 Amps at 115 VAC resistive load Works on 120VAC and 12VDC power sources AP21 ORDERING INFORMATION PART NUMBER DESCRIPTION Single-circuit time switch The AP21 Meets NEMA TS1/TS2 Requirements RTC-Traffic.com contact our team at Info@RTC-Traffic.com for more information TOLL-FREE FAX RTC Manufacturing, Inc., 1016 Enterprise Place, Arlington, Texas RTC Manufacturing, Inc. All Rights Reserved

13 ODOT ITB Section 4: Flashers, Timers, & Software Systems Item 4-4

14

15 ODOT ITB Section 4: Flashers, Timers, & Software Systems Item SERIES Model 254 (Edco ACP-340) 120 VAC Single Phase Surge Protective Device Technical Documentation The ASCO Model 254 filtering surge protector absorbs power line noise and switching transients that other suppressors and RFI filters may pass through. It designed to protect intersection controllers and other sensitive equipment from random time-base, memory loss and other more sever transient related problems. Model 254 can replace the existing EMI filter in the traffic cabinet if high frequency attenuation over 25 MHz is not required. Key Specs Voltage: 120 VAC Current: 10 Amp Connection: 1/4-20 Stainless Steel Lugs Mounting: Flange *See Ordering Information for model number selection General Technical Specifications Operating Voltage Clamping Voltage Operating Current Peak Surge Current Operating Frequency EMI Attenuation SPD Technology Modes of Protection Connection Type Operating Temperature Dimensions (in/mm) Weight (lb/kg) Warranty 120 VAC 395 VAC 10 A 32.5 ka/mode, 65 ka/total 47-63Hz 60 db typ Metal Oxide Varisters (MOV) w/ L-C Filter L-N, N-G 1/4-20 Stainless Steel Stud -40 C to +85 C H x W x L [60.3 x 79.4 x mm] 1lb, 13.5 oz. [ 0.84 kg] 5 years Features Industry-Leading Noise Filtering Nanosecond response time Incorporates series choke 5 Year Warranty V DANGER! Only qualified personnel should install or service this system. Electrical safety pre-cautions must be followed when installing or servicing this equipment. To prevent risk of electrical shock, turn off and lock out all power sources to the unit before making electrical connections or servicing. Seulement le personnel qualifié doit installer ou maintenir ce systéme. Des précautions de sécurité en électricité doivent être suivis lors de l installation ou de la maintenance de cet equipement. Pour eviter tout risque de choc électrique, débranchez et verouiller toutes les sources d alimentation de cet equipement avant de. Caution This product could become excessively hot and rupture in the rare event of power line conditions or surge that exceed its rated operating specifications. Appropriate precautions should be exercised. High voltages are present on electrical termination. Unit should be serviced by qualified personnel only.

16 Installation Instructions Circuit Breaker 10A Max. Cabinet Power AC Hot Bus 120 VAC Input Earth Site Variable (opiton) Main Line Main Neutral Earth Model 254 Ground Line Out Neutral Out Protected Power Source (to controller and other sensitive electronics) Dimensions Ordering Information MODEL Former Model Name NF010AN5NO Edco ACP-340 APPLICATION 120VAC, 10A ASCO Power Technologies th St. North, Clearwater, FL surge.ascopower.com Copyright January Publication ID RevA

17 AP22 TIME SWITCH 2-Way Radio / Cellular / Ethernet / Wi-Fi ODOT ITB Section 4: Flashers, Timers, & Software Systems Item 4-4 The AP22 Time Switch is a two-circuit, calendar programmable solid state time switch. It is used for switching electric circuits according to a pre-set time and date program. It has the ability to run up to ten different day plans and thirty-six different annual exception plans to accommodate different school calendars and/or traffic patterns throughout the year. The AP22 auto prompting alpha-numeric display makes programming fast and simple. Upload and download programming via 2-Way Radio, Cellular, Ethernet, Wi-Fi or Laptop. RTC-Traffic.com contact our team at Info@RTC-Traffic.com for more information TOLL-FREE FAX RTC Manufacturing, Inc., 1016 Enterprise Place, Arlington, Texas RTC Manufacturing, Inc. All Rights Reserved.

18 AP22 TIME SWITCH 2-Way Radio / Cellular / Ethernet / Wi-Fi AP22 SPECIFICATIONS DESCRIPTION Upload and download programming via 2-Way Radio, Cellular, Ethernet, Wi-Fi or Laptop. DISPLAY KEYBOARD BACK-UP POWER OUTPUT POWER TIME BASE Two-line, 16 characters per line Liquid Crystal Display (LCD) Sixteen-key, positive action push button Non-volatile memory Two SPDT relays rated at 15 amps 12VDC or 115 VAC resistive load Less than 0.25 Watt at rest, 0.6 watt with relay ON, 12VDC AC Power = 60Hz power line DC Power = Temperature-compensated crystal with accuracy of.35 seconds/day SIZE 10 3/8"h x 4 3/4"w x 2"d TEMPERATURE RANGE -30 to +74 Celsius AP22 FEATURES Two-line, sixteen-character, Liquid Crystal Display (LCD) Automatic Daylight Saving Time adjustments Program memory stored for years - no batteries to replace The user-friendly display auto-prompts the operator through the programming process Ten day plans, sixteen program steps per plan accommodate standard school day, school holidays, early dismissal days, summer school days, etc. Standard week plan programming uses any day plan for the most complicated school schedule Thirty-six annual programs use exception-day programming to assign any day plan to any calendar day(s) Two independent 15-amp relay outputs Program transfers from unit to unit Works on 120VAC and 12VDC power sources AP22 ORDERING INFORMATION PART NUMBER DESCRIPTION Two-output time switch with CPC connector and 48" wiring harness Program transfer cable AC power cable with connector The AP22 Meets NEMA TS1/TS2 Requirements RTC-Traffic.com contact our team at Info@RTC-Traffic.com for more information TOLL-FREE FAX RTC Manufacturing, Inc., 1016 Enterprise Place, Arlington, Texas RTC Manufacturing, Inc. All Rights Reserved

19 AP22 TIME SWITCH 2-Way Radio / Cellular / Ethernet / Wi-Fi ODOT ITB Section 4: Flashers, Timers, & Software Systems Item 4-5 The AP22 Time Switch is a two-circuit, calendar programmable solid state time switch. It is used for switching electric circuits according to a pre-set time and date program. It has the ability to run up to ten different day plans and thirty-six different annual exception plans to accommodate different school calendars and/or traffic patterns throughout the year. The AP22 auto prompting alpha-numeric display makes programming fast and simple. Upload and download programming via 2-Way Radio, Cellular, Ethernet, Wi-Fi or Laptop. RTC-Traffic.com contact our team at Info@RTC-Traffic.com for more information TOLL-FREE FAX RTC Manufacturing, Inc., 1016 Enterprise Place, Arlington, Texas RTC Manufacturing, Inc. All Rights Reserved.

20 AP22 TIME SWITCH 2-Way Radio / Cellular / Ethernet / Wi-Fi AP22 SPECIFICATIONS DESCRIPTION Upload and download programming via 2-Way Radio, Cellular, Ethernet, Wi-Fi or Laptop. DISPLAY KEYBOARD BACK-UP POWER OUTPUT POWER TIME BASE Two-line, 16 characters per line Liquid Crystal Display (LCD) Sixteen-key, positive action push button Non-volatile memory Two SPDT relays rated at 15 amps 12VDC or 115 VAC resistive load Less than 0.25 Watt at rest, 0.6 watt with relay ON, 12VDC AC Power = 60Hz power line DC Power = Temperature-compensated crystal with accuracy of.35 seconds/day SIZE 10 3/8"h x 4 3/4"w x 2"d TEMPERATURE RANGE -30 to +74 Celsius AP22 FEATURES Two-line, sixteen-character, Liquid Crystal Display (LCD) Automatic Daylight Saving Time adjustments Program memory stored for years - no batteries to replace The user-friendly display auto-prompts the operator through the programming process Ten day plans, sixteen program steps per plan accommodate standard school day, school holidays, early dismissal days, summer school days, etc. Standard week plan programming uses any day plan for the most complicated school schedule Thirty-six annual programs use exception-day programming to assign any day plan to any calendar day(s) Two independent 15-amp relay outputs Program transfers from unit to unit Works on 120VAC and 12VDC power sources AP22 ORDERING INFORMATION PART NUMBER DESCRIPTION Two-output time switch with CPC connector and 48" wiring harness Program transfer cable AC power cable with connector The AP22 Meets NEMA TS1/TS2 Requirements RTC-Traffic.com contact our team at Info@RTC-Traffic.com for more information TOLL-FREE FAX RTC Manufacturing, Inc., 1016 Enterprise Place, Arlington, Texas RTC Manufacturing, Inc. All Rights Reserved

21 AP21 TIME SWITCH Industry Standard, Time-Tested School Zone Appliance ODOT ITB Section 4: Flashers, Timers, & Software Systems Item 4-7 The AP21 is a single-circuit, calendar-programmable, solid state time switch. It is primarily designed for switching electric circuits according to a pre-set time and date program. The AP21 auto prompting alpha-numeric display makes programming transfers fast and simple by using our AP21 software on a laptop. The AP21 may be powered from any120vac or 12VDC supply. RTC-Traffic.com contact our team at Info@RTC-Traffic.com for more information TOLL-FREE RTC Manufacturing, Inc., 1016 Enterprise Place, Arlington, Texas RTC Manufacturing, Inc. All Rights Reserved.

22 AP21 TIME SWITCH Industry Standard, Time-Tested School Zone Appliance AP21 SPECIFICATIONS DESCRIPTION Fast and simple programming using our AP21 software on a laptop. DISPLAY KEYBOARD BACK-UP POWER ELECTRICAL CONNECTION OUTPUT POWER TIME BASE SIZE TEMPERATURE RANGE One-line, 16 character alpha-numeric Liquid Crystal Display (LCD) Sixteen-key, positive action push button 48-hour capacitive Terminal block (#12 to #20 AWG) optional CPC connector with harness SPDT relay rated at 15 amps 115 VAC resistive load 0.25 Watt at rest, 0.76 Watt relay ON, 12VDC AC Power = 60Hz line power DC Power = Temperature-compensated crystal with accuracy of +/-.005 seconds/day 7.6"H x 3.7"W x 1.55"D -30 to +74 Celsius AP21 FEATURES One-line, sixteen-character, Liquid Crystal Display (LCD) 16 character, alpha-numeric keypad Automatic Daylight Saving Time (DST) adjustments Time of day entered in 12-hour format Automatic Leap Year compensation 48-hour capacitive memory back-up no batteries to replace The display Auto Prompts the operator through the user-friendly programming process 16 powerful program steps Single Day, Weekend, Week Day, or Every Day programming capability for each program step 10 skip plans each skip plan prevents the time switch output from activating on a specific day or consecutive days SPDT relay output rated at 15 Amps at 115 VAC resistive load Works on 120VAC and 12VDC power sources AP21 ORDERING INFORMATION PART NUMBER DESCRIPTION Single-circuit time switch The AP21 Meets NEMA TS1/TS2 Requirements RTC-Traffic.com contact our team at Info@RTC-Traffic.com for more information TOLL-FREE FAX RTC Manufacturing, Inc., 1016 Enterprise Place, Arlington, Texas RTC Manufacturing, Inc. All Rights Reserved

23 M2M CELLULAR COMMUNICATIONS MODEM Communicates With School Zone Flashers Using SMS Texting The RTC Model TSC2G is a compact communications modem that allows the user to connect an RTC Time Switch to a central computer using SMS texting. The TSC2G provides full, two-way communications from a central ODOT ITB Section 4: Flashers, Timers, & Software Systems Item 4-9 computer to any Model AP22 or CPR2102 Time Switch via SMS texting eliminating the need for any additional infrastructure. RTC-Traffic.com contact our team at Info@RTC-Traffic.com for more information TOLL-FREE FAX RTC Manufacturing, Inc., 1016 Enterprise Place, Arlington, Texas RTC Manufacturing, Inc. All Rights Reserved.

24 M2M CELLULAR COMMUNICATIONS MODEM Communicates With School Zone Flashers Using SMS Texting M2M FEATURES Two-way communication with AP22 and CPR2102 time switches using SMS texting (no additional infrastructure required) Omni antenna typically mounts inside the flasher cabinet, an external Omni antenna is available if required LED indicator for power and SMS network connection Compact size: 3.4"w x 2.4"h x 1"d with mounting tabs Simple, plug-and-play operation Make program changes anytime day or night Operating temperature range: -30 to +75 Celsius M2M SPECIFICATIONS DESCRIPTION DIMENSIONS 3.4"w x 2.4"h x 1"d POWER OPERATING TEMPERATURE SMS ANTENNA OPTIONS PROGRAMMING MANUAL CONTROL VALIDATE PROGRAMMING 12VDC, powered from DB9 on time switch -30 to +75 Celsius Short Message Service Omni antenna mounted inside the flasher cabinet (standard) Omni antenna mounted outside the flasher cabinet (if required) Make programming changes to your school zone flashers anytime from a PC or laptop connected to the internet Send manual control commands at anytime, day or night Validate the program in any time switch at anytime, day or night GPS Time sync reference and map location services M2M SERVICE PLANS: Choose from a 5-year or 10-year service agreement RTC-Traffic.com contact our team at Info@RTC-Traffic.com for more information TOLL-FREE FAX RTC Manufacturing, Inc., 1016 Enterprise Place, Arlington, Texas RTC Manufacturing, Inc. All Rights Reserved

25 M2M CELLULAR COMMUNICATIONS MODEM Communicates With School Zone Flashers Using Cellular Technology The RTC M2M is a compact communications modem that allows the user to connect an RTC Time ODOT ITB Section 4: Flashers, Timers, & Software Systems Item G Modem With Paddle Antenna, Less Communication Plan Switch to a central computer using RTC Connect software. The M2M provides full, two-way communications from a central computer to any Model AP22 or CPR2102 Time Switch. This eliminates the cost and maintenance of additional infrastructure. RTC-Traffic.com contact our team at Info@RTC-Traffic.com for more information TOLL-FREE FAX RTC Manufacturing, Inc., 1016 Enterprise Place, Arlington, Texas RTC Manufacturing, Inc. All Rights Reserved.

26 M2M CELLULAR COMMUNICATIONS MODEM Communicates With School Zone Flashers Using Cellular Technology M2M FEATURES Simple, plug-and-play operation Powered directly by RTC time switches with no external power supply needed Make program changes anytime Modems are fully certified and carrier approved Two-year warranty Time Switch time is synchronized daily with cell tower time Can be mounted directly to time switch Antenna typically mounts inside the flasher cabinet; an external antenna is available if required; other antenna optional, as needed LED indicator for power and cellular network connection Extended warrranties up to five years available M2M CERTIFICATIONS REGULATORY COMPLIANCE FCC Class B (US), IC (Canada) SAFETY UL (US), cul (Canada) QUALITY MIL-STD-810: high-temp, low-temp, cold dwell, random vibration and sine vibration SAE J1455: random vibration and sine vibration M2M SERVICE PLANS Choose from one, five, or ten-year service agreement OPTIONAL GPS ENABLED DEVICE AVAILABLE Time sync reference and map location services M2M SPECIFICATIONS DESCRIPTION DIMENSIONS 2.45"W x 3.17"H x 1.16"D WEIGHT.65 LB TIME SYNC Cell System GPS CHASSIS TYPE Aluminum OPERATING TEMPERATURE -40 to +85 Celsius HUMIDITY Relative Humidity 15% to 93% non-condensing SMS Short Message Service Supported PERFORMANCE HSPA+ FREQUENCY BAND Hepta-band 850/900/AWS 1700/ MHz RTC CONNECT TM COMMUNICATION FLOW RTC DATA SERVER CELL CARRIER Central Traffic Office Running RTC Connect TM Two-way Internet Communication Two-way Internet Communication Two-way Cell Communication RTC-Traffic.com contact our team at Info@RTC-Traffic.com for more information TOLL-FREE FAX RTC Manufacturing, Inc., 1016 Enterprise Place, Arlington, Texas RTC Manufacturing, Inc. All Rights Reserved