Opterna FTTx Product Guide.

Transcription

1 Opterna FTTx Product Guide

2 Opterna is a US-based opto-electronic product company established in Opterna has manufacturing facilities and sales and support offices in the U.S, Europe, Asia-Pacific, the Middle East and Latin America. Opterna s vertically integrated structure enables it to combine components into customized solutions, ranging from modular components to systems. The company has a strong technical base with an emphasis on quality, reliability and high volume manufacturing. Opterna s growth strategy focuses on the following products: Fiber Interconnect Products Passive Optical Systems Data Center Products Smart Developments / Smart Buildings Smart Solutions for the Internet of Things Complete End-to-End Solutions for Developers

3 Table of Contents MDU/MTU/SFU Solutions...4 BuildOpt Terminal Plate (TPA)...6 BuildOpt Micro Terminal... 8 BuildOpt Mini Terminal...12 BuildOpt Collector Plate Assembly (CPA)...16 BuildOpt MT Collector Assembly (MTCA)...18 Terminal Access Box (TAB) Fiber Distribution Box (FDB)...22 Optical Distribution Box (ODB)...24 OSP Solutions...27 TurnOpt Fiber Distribution Hub...28 Fiber Optic, Splitter Module (GEN2 PLC)...32 Fiber Optic, Surface Mount Enclosure, TurnOpt Series Outdoor FTTx Demarc (DOpt)...37 Copyright 2018, Opterna, Inc. All rights reserved. No part of this document may be copied, reproduced, or transmitted in any form or by any means without the prior written permission of Opterna. The Opterna name and logo are registered trademarks of Opterna Technology Limited. 1

4 Solutions for FTTx Applications CTP TPA Mini Terminal MFDH 2

5 CPA SL-FDH MTCA Micro Terminal 3

6 MDU Solutions Opterna s BuildOpt product series is optimized to efficiently and cost-effectively provide for connectivity to small, medium and high-rise Multi-Dwelling Units (MDUs). BuildOpt can also be paired with TurnOpt and FDB Series fiber distribution hubs and TAB Series terminal access boxes for trunk/feeder cable requirements. Field-proven plug-and-play technology Lowest loss connector technology Patented cable slack storage Patented splitter technology 4

7 MTU, SFU Solutions Opterna s FDB, TAB, OSB and ODB products are optimized to efficiently provide FTTx connectivity to commercial and residential Multi-Tenant Units (MTUs), Single Family Units (SFUs), and Campus MDUs. TAB, OSB and ODB products can also be paired with TurnOpt fiber distribution hubs for fiber trunk requirements. Field proven plug-and-play technology Telcordia certified SC and LC connectors Patented splitter technology 5

8 BuildOpt Terminal Plate Assembly MDU The BuildOpt Terminal Plate (TPA) is an innovative solution for fiber distribution to living units in a Multi-Family Dwelling Unit environment. The BuildOpt TPA features a plate-mounted rotating spool, on which the fiber tail and fiber cable slack are stored. After mounting the TPA, the installer simply unlocks the spool and pays out the desired length of fiber tail, utilizing the supplied pulling eye. The pre-terminated tail can then connect to an Opterna Collector Plate or Collector/Terminal Plate. The TPA may also connect directly to Opterna s TurnOpt FDH. TPA models are available with one or two 12-fiber tails having standard stub lengths of 100, 200, or 350 feet. User-defined lengths are also available. The 12-fiber TPA can store one tail up to 400 feet in length. The 24-fiber TPA can store two tails up to 200 feet in length. Each 12-fiber tail is terminated with a low loss 12-fiber female MPO connector. Drop cables up to 4.8mm in size are supported. Features Designed for MDU applications Innovative rotating fiber storage spool One or two 12-fiber MT connector tails, supports 12 or 24 drops 100, 200 and 350 stub lengths Supports up to 4.8mm cables and splice on connectors Wall-mount design Convenient pulling-eye included with each MT-connector Grounding connection included 6

9 BuildOpt Terminal Plate Assembly MDU Specifications Parameter Cable type Fiber type Connector Insertion Loss Return Loss Plate Material Dimensions Listings 12f flat ribbon riser G.657.B3 bend insensitive single mode 0.3 db > 65dB Metal 11.4 x 11.4 x 5.7 inches / 290 x 290 x 145 mm UL, cul Ordering Information Part Number Subscriber Ports Tail Length Slack Storage ADTPA-1SAFM SC/APC 100 Feet 400 Feet ADTPA-1SAFM SC/APC 200 Feet 400 Feet ADTPA-1SAFM SC/APC 350 Feet 400 Feet ADTPA-1SAFM-xxx 12 SC/APC User Defined 400 Feet ADTPB-1SAFM SC/APC 100 Feet 200 Feet ADTPB-1SAFM SC/APC 200 Feet 200 Feet ADTPB-1SAFM SC/APC 350 Feet 200 Feet ADTPB-1SAFM-xxx 24 SC/APC User Defined 200 Feet xxx = User Defined Length in Feet 032 = 32 feet 050 = 50 feet 065 = 65 feet 100 = 100 feet 150 = 150 feet 200 = 200 feet 250 = 250 feet 300 = 300 feet 350 = 350 feet 400 = 400 feet 450 = 450 feet 500 = 500 feet 7

10 Micro Terminal MDU The Micro Terminal contains a long, durable pre-terminated fiber jumper that is packaged in a palm-sized, all-plastic enclosure having built-in fiber adapters and slack storage. The fiber pays out easily from the Micro Terminal for routing back to the main terminal. Once the fiber is routed, the excess fiber slack is reeled back into the Micro Terminal for easy and convenient storage. The Micro Terminal can be ordered with 1xSC Simplex, 2xSC Simplex, 1xLC Duplex, or 2xLC Duplex connectors and adapters for your fiber application. It comes with a convenient Desktop Mounting Bracket that can be used to mount the Micro Terminal onto any flat surface (upside down or right side up in any direction.) It also comes with a Wall Mounting Plate that allows the Micro Terminal to install directly over any single-gang or double-gang outlet box or mud ring. The fiber routes conveniently behind the Wall Mounting Plate into existing conduit. Features Palm-sized, all-plastic Micro Terminal with built-in slack storage (up to 65 feet (20 or 2mm fiber) Pre-terminated fiber solution with user-defined cable lengths up to 450 feet 1 port and 2 port version using SC Simplex or LC Duplex Connectors and Adapters 2xSC Simplex; 1xLC and 2xLC Duplex connectors protected with a pulling sock for easy installation Desktop and Wall Mount Brackets come with each Micro Terminal (Stud Mounting Options available) Fiber Routing Kit available with inside/outside/ flat corner bend limiters and continuous straight extrusion for routing fiber along exposed flat surfaces Riser, Plenum and Rugged LSZH cabling available for fiber routing through conduit pathways or in cable trays Smooth Ivory White finish with 94V-0 ABS pastic material 8

11 Micro Terminal MDU Dimensions Note: 450ft is the longest allowable length in the current configuration Ordering Information OSB Part Number Product Input Output Slack Storage Fiber OSB-1PSC-xxx-MLAPC OSB-1PSC-xxx-MRAPC OSB-1PSC-xxx-RAPC OSB-1PSC-xxx-PAPC OSB-2PSC-xxx-MLAPC OSB-2PSC-xxx-MRAPC OSB-1PLD-xxx-MLUPC OSB-1PLD-xxx-MRUPC OSB-2PLD-xxx-MLUPC OSB-2PLD-xxx-MRUPC 1 Fiber OSB Micro Terminal 1 Fiber OSB Micro Terminal 1 Fiber OSB Micro Terminal 1 Fiber OSB Micro Terminal 2 Fiber OSB Micro Terminal 2 Fiber OSB Micro Terminal 2 Fiber OSB Micro Terminal 2 Fiber OSB Micro Terminal 4 Fiber OSB Micro Terminal 4 Fiber OSB Micro Terminal 1xSC/APC 1xSC/APC 1xSC/APC 1xSC/APC 2xSC/APC 2xSC/APC 2xLC/UPC 2xLC/UPC 4xLC/UPC 4xLC/UPC 1xSC/APC Simplex 1xSC/APC Simplex 1xSC/APC Simplex 1xSC/APC Simplex 2xSC/APC Simplex 2xSC/APC Simplex 1xLC/UPC Duplex 1xLC/UPC Duplex 2xLC/UPC Duplex 2xLC/UPC Duple 65 feet (20 65 feet (20 65 feet (20 65 feet (20 65 feet (20 65 feet (20 65 feet (20 65 feet (20 65 feet (20 65 feet (20 Miniflex LSZH Miniflex Riser Riser Plenum Miniflex LSZH Miniflex Riser Miniflex LSZH Miniflex Riser Miniflex LSZH Miniflex Riser 9

12 Micro Terminal MDU Standard Accessories Desktop Mounting Direct Mounting Optional Accessories Mounting Face Trim Plate & Mount Bracket 10

13 MDU Micro Terminal Fiber Routing Accessories Inside Corner Fiber Router Flat Corner Fiber Router - Right Flat Corner Fiber Router - Left Outside Corner Fiber Router Fiber Routing Extrusion Part Number Product Contents OSB-AC-MICRO-SMK Stud Mount Kit Stud Mounting Bracket Trim Faceplate OSB-AC-MICRO-FRK Fiber Routing Kit Inside Corner(6) Outside Corner(6) Flat Corner Left(6) Flat Corner Right(6) OSB-AC-MICRO-FRE Fiber routing Extrusion Flexible Extrusion 65 feet (20 11

14 Mini Terminal MDU The Mini Terminal is a miniature, all-plastic version of Opterna s patented BuildOpt Terminal Plate Assembly, optimized for accepting drop cables from living units or commercial units in smaller Multiple Tenant Unit (MTU) or Multiple Dwelling Unit (MDU) applications. It s a small but versatile plug-and-play fiber distribution solution for MTU, MDU or generic FTTx applications. The Mini-Terminal supports four configurations with user-defined lengths: MINI-0: 12F SM MPO Solution with Dual 6F Splice Trays. MINI-1: 12F SM MPO Solution with a 12 Port SC/APC Panel. MINI-3: 8 Port 1F SM Solution with a 1x8 splitter and 8 SC/APC Ports. MINI-4: 8 Port 2F SM Solution with 2x(1x4) splitters and 8 SC/APC Ports. MINI-6: 8 Port 2F SM Solution with a 2x8 splitter and 8 SC/APC Ports. The Mini-Terminal features a removable rotating spool on which the fiber tail and fiber cable slack are stored. The base mounts onto any flat surface and the spool pays out the desired length of fiber. The spool locks onto the base to prevent additional rotation after payout and slack storage. The pre-terminated 12-fiber MPO fiber tail can be connected to any number of fiber products including the Opterna TurnOpt Collector Plate, Collector/Terminal Plate, or MT Collector Assembly, or to the Opterna TurnOpt Fiber Distribution Hub. The pre-terminated 1 or 2 Fiber SC/APC tail can be connected to any number of terminals after routing down a hallway, riser or conduit pathway. Features All-plastic design for mounting onto any flat surface 1F, 2F, or 12F pre-terminated fiber tails supporting 8 or 12 drops Craft-friendly entry points for living unit drop cables Simple docking mechanism to lock the cable spool at desired position Innovative rotating fiber spindle for easy spool rotation during cable pay out and reel in User-defined fiber tail lengths with pulling-eye(s) or pulling socks provided Rugged cabling for pulling through conduits or installing in cable trays Removable Cover and Removable Adapters for easy access to all fiber ports 12

15 MDU Mini Terminal Specifications Family Mini Terminal SC Ports LC Ports Fibers Splitters Dimensions Mini-0 Mini-Terminal 12-Fiber Dual Splice Tray Mini-1 Mini-Terminal 12-Port 1xMPO to SC Panel Mini-3 Mini-Terminal 1x8 Splitter Cassette Mini-4 Mini-Terminal 2x1x4 Splitter Cassette x 6.9 x 3.3 (HxWxD) inches 6.9 x 6.9 x 3.3 (HxWxD) inches 6.9 x 6.9 x 3.3 (HxWxD) inches 6.9 x 6.9 x 3.3 (HxWxD) inches Dimensions 12-Fiber MiniTerminal with Splice Tray 8-Port MiniTerminal with Splitter Module 12-Port MiniTerminal with Adapter holder 13

16 Mini Terminal MDU Ordering Information Part Number Product Input Output Slack Storage Fiber MINI-0-xxx-ML 12 Fiber Mini Terminal 1 x 12-Fiber MPO MINI-0-xxx- MR 12 Fiber Mini Terminal 1 x 12-Fiber MPO MINI-0-xxx-P 12 Fiber Mini Terminal 1 x 12-Fiber MPO MINI-1-xxx- MLAPC MINI-1-xxx- MRAPC MINI-1-xxx- PAPC MINI-3-xxx- MLAPC MINI-3-xxx- MRAPC Dual Splice Trays Dual Splice Trays Dual Splice Trays 12 Port Mini Terminal 1 x 12-Fiber MPO 12 Port SC/APC 12 Port Mini Terminal 1 x 12-Fiber MPO 12 Port SC/APC 12 Port Mini Terminal 1 x 12-Fiber MPO 12 Port SC/APC 8 Port Mini Terminal 1 x 8 Splitter 8x SC/APC 8 Port Mini Terminal 1 x 8 Splitter 8x SC/APC 100 feet ( feet ( feet ( feet ( feet (30 80 feet ( feet ( feet (61 Miniflex LSZH Miniflex Riser Plenum Miniflex LSZH Miniflex Riser Plenum Miniflex LSZH Miniflex Riser 14

17 MDU Mini Terminal Ordering Information (continued) Part Number Product Input Output Slack Storage Fiber MINI-3-xxx- PAPC MINI-4-xxx- MLAPC MINI-4-xxx- MRAPC MINI-4-xxx- RAPC MINI-4-xxx- PAPC MINI-6-xxx- MLAPC MINI-6-xxx- MRAPC MINI-6-xxx- RAPC MINI-6-xxx- PAPC 8 Port Mini Terminal 1 x 8 Splitter 8x SC/APC 8 Port Mini Terminal 2x(1x4) Splitters 8x SC/APC 8 Port Mini Terminal 2x(1x4) Splitters 8x SC/APC 8 Port Mini Terminal 2x(1x4) Splitters 8x SC/APC 8 Port Mini Terminal 2x(1x4) Splitters 8x SC/APC 8 Port Mini Terminal 2 x 8 Splitter 8x SC/APC 8 Port Mini Terminal 2 x 8 Splitter 8x SC/APC 8 Port Mini Terminal 2 x 8 Splitter 8x SC/APC 8 Port Mini Terminal 2 x 8 Splitter 8x SC/APC 200 feet ( feet ( feet ( feet ( feet ( feet ( feet ( feet ( feet (30 Plenum Miniflex LSZH Miniflex Riser Riser Plenum Miniflex LSZH Miniflex Riser Riser Plenum 15

18 BuildOpt Collector Plate Assembly MDU The BuildOpt Collector Plate Assembly (CPA) is an integral component of Opterna s fiber connectivity system. The BuildOpt CPA provides an integration point between the TurnOpt Fiber Distribution Hub and the BuildOpt Terminal Plate, enabling a zone or distribution network design for MDUs. The CPA features a bend-insensitive fiber cable stub that is pre-terminated with six or twelve 12-fiber MPO connectors. Riser-rated or Indoor/Outdoor cable stubs options are available in 100, 200 and 350 lengths. User-defined lengths are also available. The CPA includes a ground connection, four mounting holes and a mounting template/installation guide. Features Six or twelve pre-terminated 12-fiber MPO connectors 100, 200 and 350 stub lengths Riser and Indoor/Outdoor cable stub options Low insertion/return loss connectors 72-fiber Cable Stub Diameter is 0.52 inches 144-fiber Cable Stub Diameter is 0.60 inches Grounding connection included 16

19 BuildOpt Collector Plate Assembly MDU Specifications Parameter 72-fiber model 144-fiber model Cable type 12-fiber ribbon, Riser or Indoor/Outdoor Fiber type G.657.A bend insensitive single mode Cable jacket diameter 0.52 inches 0.60 inches 12-fiber MPO Ports 6 12 Connector Insertion Loss 0.3 db Return Loss > 65dB Plate Material Metal Dimensions 10.5 x 9 x 3.5 inches / 265 x 227 x 89 mm Listings UL, cul (or cetl) Ordering Information Part Number Fiber Count Cable Type Cable Length AMCP6-1MMNC Fiber Riser-rated 100 Feet AMCP6-1MMNC Fiber Riser-rated 200 Feet AMCP6-1MMNC Fiber Riser-rated 350 Feet AMCP6-1MMNC-xxx 72 Fiber Riser-rated User Defined AMCP6-2MMNC Fiber Indoor/Outdoor 100 Feet AMCP6-2MMNC Fiber Indoor/Outdoor 200 Feet AMCP6-2MMNC Fiber Indoor/Outdoor 350 Feet AMCP6-2MMNC-xxx 72 Fiber Indoor/Outdoor User Defined AMCP12-1MMNC Fiber Riser-rated 100 Feet AMCP12-1MMNC Fiber Riser-rated 200 Feet AMCP12-1MMNC Fiber Riser-rated 350 Feet AMCP12-1MMNC-xxx 144 Fiber Riser-rated User Defined AMCP12-2MMNC Fiber Indoor/Outdoor 100 Feet AMCP12-2MMNC Fiber Indoor/Outdoor 200 Feet AMCP12-2MMNC Fiber Indoor/Outdoor 350 Feet AMCP12-2MMNC-xxx 144 Fiber Indoor/Outdoor User Defined xxx = User Defined Length in Feet 032 = 32 feet 050 = 50 feet 065 = 65 feet 100 = 100 feet 150 = 150 feet 200 = 200 feet 250 = 250 feet 300 = 300 feet 350 = 350 feet 400 = 400 feet 450 = 450 feet 500 = 500 feet 17

20 BuildOpt MT Collector Assembly MDU The BuildOpt MT Collector Assembly (MTCA) combines the features of a CPA in an optimized enclosure. The MTCA features a 72-fiber or a 96-fiber bend-insensitive fiber cable stub, preterminated with six or eight 12-fiber MT Connectors. Riser-rated or Indoor/Outdoor cable stubs are available in 100, 200 and 300 lengths. User-defined lengths are also available. The rugged metal enclosure includes watertight seals and glands to protect the internal connections. Cable management features ensure proper retention and placement of the fiber cables. Exterior features on the MTCA enclosure include a grounding bolt, integral wallmount brackets and a door- locking tab with a padlock provision. Features Six or eight pre-terminated 12-fiber MT connectors 100, 200 and 300 stub lengths Rugged metal enclosure with locking provision Watertight construction Integral wall-mount brackets Low insertion/return loss connectors Grounding connection included 18

21 BuildOpt MT Collector Assembly MDU Specifications Parameter 72-fiber model 96-fiber model Cable type 12-fiber ribbon, Riser or Indoor/Outdoor Fiber type G.657.A bend insensitive single mode Cable jacket diameter 0.52 inches 12-fiber MPO Ports 6 8 Connector Insertion Loss 0.3 db Return Loss > 65dB Enclosure Material Steel Dimensions 8.8 x 8.8 x 4 inches / 225 x 225 x 102 mm Listings UL, cul (or cetl) Ordering Information Part Number Fiber Count Cable Type Cable Length AMCM6-1MMNC Fiber Riser-rated 100 Feet AMCM6-1MMNC Fiber Riser-rated 200 Feet AMCM6-1MMNC Fiber Riser-rated 300 Feet AMCM6-1MMNC-xxx 72 Fiber Riser-rated User Defined AMCM6-2MMNC Fiber Indoor/Outdoor 100 Feet AMCM6-2MMNC Fiber Indoor/Outdoor 200 Feet AMCM6-2MMNC Fiber Indoor/Outdoor 300 Feet AMCM6-2MMNC-xxx 72 Fiber Indoor/Outdoor User Defined AMCM8-1MMNC Fiber Riser-rated 100 Feet AMCM8-1MMNC Fiber Riser-rated 200 Feet AMCM8-1MMNC Fiber Riser-rated 300 Feet AMCM8-1MMNC-xxx 96 Fiber Riser-rated User Defined AMCM8-2MMNC Fiber Indoor/Outdoor 100 Feet AMCM8-2MMNC Fiber Indoor/Outdoor 200 Feet AMCM8-2MMNC Fiber Indoor/Outdoor 300 Feet AMCM8-2MMNC-xxx 96 Fiber Indoor/Outdoor User Defined xxx = User Defined Length in Feet 032 = 32 feet 050 = 50 feet 065 = 65 feet 100 = 100 feet 150 = 150 feet 200 = 200 feet 250 = 250 feet 300 = 300 feet 350 = 350 feet 400 = 400 feet 450 = 450 feet 500 = 500 feet 19

22 Terminal Access Box (TAB) MTU, SFU Opterna s Terminal Access Box (TAB) Family offers low-cost fiber termination solutions that provide access for up to 24 fiber ports in two conveniently-sized boxes: TAB-12: 4, 8, or 12 Port Configurations in a traditional two-layer design having a rear splice area for cable slack and splice protection, and a front interconnect area for SC ports. Dimensions are 9.0H x 8.0W x 2.2D inches. TAB-24: 8, 16, or 24 Port Configurations in a simple single-layer design having all splicing and all interconnects under one cover (indoor applications only). Dimensions are 9.5H x 7.0W x 2.5D inches The TAB-12 is suitable for indoor or outdoor FTTx applications that support up to 12 subscribers. It has a compact, light-weight wall-mountable housing with a weatherproof gasket and three weatherproof cable entry/exit ports. It easily accommodates 1 or 2 splitters, 12 splices and 12 SC ports. The TAB-24 is a multi-purpose fiber terminal that can be pre-terminated or splice ready for 1 or 2 splitters and/or 24 SC ports. It is very suitable for FTTH applications in multi-dwelling buildings. This terminal is small, light-weight and perfect for fiber routing. It s wall mountable, and very easy to install and maintain. The TAB-24 provides quick access to 24 fibers. It also allows straight through cabling to multiple floors while distributing fibers onto each floor. The required fibers assigned to the floor will be accessible, while the other fibers continue through the box to their destination (without interruption). Features Two versatile fiber terminals for a wide-range of applications Pre-loaded with adapters, pigtails, or PLC splitters Accommodates mechanical or fusion splice protection sleeves Can be used with all fiber types Full fiber management Industry standard wall mount designs Light and easy to install and maintain 20

23 Terminal Access Box (TAB) MTU, SFU Ordering Information Part Number Product Input Output Features TAB-12E (empty) 12 Port Fiber Terminal 12x Simplex Frame 12x Simplex Frame 12x Simplex Frame TAB-12SCA 12 Port Fiber Terminal 12xSC/APC Simplex 12xSC/APC Simplex 12 Port Bulkhead TAB-12SCA12 12 Port Fiber Terminal 12 Fibers 12xSC/APC Simplex Splice-Ready TAB-12SCA04 4 Port Fiber Terminal 4 Fibers 4xSC/APC Simplex Splice-Ready TAB-12SCA08 8 Port Fiber Terminal 8 Fibers 8xSC/APC Simplex Splice-Ready TAB-12SCA104 4 Port Fiber Terminal 1x4 Splitter 4xSC/APC Simplex Splice-Ready TAB-12SCA108 8 Port Fiber Terminal 1x8 Splitter 8xSC/APC Simplex Splice-Ready TAB-12SCA2x104 8 Port Fiber Terminal 2x(1x4 Splitters) 8xSC/APC Simplex Splice-Ready TAB-12SCA208 8 Port Fiber Terminal 2x8 Splitter 8xSC/APC Simplex Splice-Ready UPC: use SCU for SCA Part Number Product Input Output Description TAB-24E (empty) 24 Port Fiber Terminal 24x Simplex Frame 24x Simplex Frame 24x Simplex Frame TAB-24SCA 24 Port Fiber Terminal 24xSC/APC Simplex 24xSC/APC Simplex 24 Port Bulkhead TAB-24SCA24 24 Port Fiber Terminal 24 Fibers 24xSC/APC Simplex Splice-Ready TAB-24SCA08 8 Port Fiber Terminal 8 Fibers 8xSC/APC Simplex Splice-Ready TAB-24SCA16 16 Port Fiber Terminal 16 Fibers 16xSC/APC Simplex Splice-Ready TAB-24SCA3x Port Fiber Terminal 3x(1x8 Splitters) 8xSC/APC Simplex Splice-Ready TAB-24SCA108 8 Port Fiber Terminal 1x8 Splitter 8xSC/APC Simplex Splice-Ready TAB-24SCA2x104 8 Port Fiber Terminal 2x(1x4 Splitters) 8xSC/APC Simplex Splice-Ready TAB-24SCA208 8 Port Fiber Terminal 2x8 Splitter 16xSC/APC Simplex Splice-Ready TAB-24SCA Port Fiber Terminal 1x16 Splitter 16xSC/APC Simplex Splice-Ready TAB-24SCA2x Port Fiber Terminal 2x(1x8 Splitters) 16xSC/APC Simplex Splice-Ready TAB-24SCA Port Fiber Terminal 2x16 Splitter 16xSC/APC Simplex Splice-Ready UPC: use SCU for SCA 21

24 Fiber Distribution Box (FDB) MTU, SFU Opterna s Fiber Distribution Box (FDB) Family offers low-cost fiber termination solutions that provide access for up to 48 fiber ports in three sizes: FDB-12: 4, 8, or 12 Fiber Configurations. Dimensions are 9.5H x 8.5W x 2.5D inches. FDB-24: 8, 16, or 24 Fiber Configurations. Dimensions are 13.0H x 10.5W x 3.5D inches. FDB-48: 16, 24, 32, or 48 Fiber Configurations. Dimensions are 20.0H x 15.4W x 5.3D inches. The FDB Family was developed for splitter-ready FTTx applications, supporting 12-fiber, 24-fiber, or 48-fiber splices. These wall-mounted units are ideal for splitting / terminating fiber cables in multi-dwelling units or small offices having low to moderate port counts. They offer a two-layer design with a large rear splice area for splice protection and excess cable slack, and a tech-friendly front interconnect area having the adapter mounting plate for the SC adapters. These boxes provide a cost-effective solution in the FTTx networks for both indoor and outdoor environments. Features Suitable for indoor and outdoor applications Made from high impact ABS material Compact and light weight enclosures Two layer design for easier installation and maintenance Improved high density fiber management Accommodates mechanical or fusion splice protection sleeves Multiple options for splitting and distribution supporting various network topologies Separate Cable Access and Cable Splice areas Cable spools to maintain minimum bend radius requirements FDB-24 FDB-12 FDB-48 22

25 MTU, SFU Ordering Information Fiber Distribution Box (FDB) Part Number Product Input Output Features FDB-12E (empty) 12 Port Distribution Box 12x Simplex Frame 12x Simplex Frame 12x Simplex Frame FDB-12SCA 12 Port Distribution Box 12xSC/APC Simplex 12xSC/APC Simplex 12 Port Bulkhead FDB-12SCA12 12 Port Distribution Box 12 Fibers 12xSC/APC Simplex Splice-Ready FDB-12SCA04 4 Port Distribution Box 4 Fibers 4xSC/APC Simplex Splice-Ready FDB-12SCA08 8 Port Distribution Box 8 Fibers 8xSC/APC Simplex Splice-Ready FDB-12SCA104 4 Port Distribution Box 1x4 Splitter 4xSC/APC Simplex Splice-Ready FDB-12SCA108 8 Port Distribution Box 1x8 Splitter 8xSC/APC Simplex Splice-Ready FDB-12SCA2x104 8 Port Distribution Box 2x1x4 Splitters 8xSC/APC Simplex Splice-Ready FDB-12SCA208 8 Port Distribution Box 2x8 Splitter 8xSC/APC Simplex Splice-Ready UPC: use SCU for SCA Part Number Product Input Output Description FDB-24E (empty) 24 Port Distribution Box 24x Simplex Frame 24x Simplex Frame 24x Simplex Frame FDB-24SCA 24 Port Distribution Box 24xSC/APC Simplex 24xSC/APC Simplex 24 Port Bulkhead FDB-24SCA24 24 Port Distribution Box 24 Fibers 24xSC/APC Simplex Splice-Ready FDB-24SCA08 8 Port Distribution Box 8 Fibers 8xSC/APC Simplex Splice-Ready FDB-24SCA16 16 Port Distribution Box 16 Fiber 16xSC/APC Simplex Splice-Ready FDB-24SCA3x Port Distribution Box 3x(1x8 Splitters) 24xSC/APC Simplex Splice-Ready FDB-24SCA108 8 Port Distribution Box 1x8 Splitter 8xSC/APC Simplex Splice-Ready FDB-24SCA2x104 8 Port Distribution Box 2x(1x4 Splitters) 8xSC/APC Simplex Splice-Ready FDB-24SCA208 8 Port Distribution Box 2x8 Splitter 8xSC/APC Simplex Splice-Ready FDB-24SCA Port Distribution Box 1x16 Splitter 16xSC/APC Simplex Splice-Ready FDB-24SCA2x Port Distribution Box 2x(1x8 Splitters) 16xSC/APC Simplex Splice-Ready FDB-24SCA Port Distribution Box 2x16 Splitter 16xSC/APC Simplex Splice-Ready FDB-24SLACK Slack Storage Box (400ft of 3mm) (200ft of 8mm) Slack Storage UPC: use SCU for SCA Part Number Product Input Output Description FDB-48SCA 48 Port Distribution Box 48xSC/APC Simplex 48xSC/APC Simplex 48 Port Bulkhead FDB-48SCA48 48 Port Distribution Box 48 Fibers 48xSC/APC Simplex Splice-Ready FDB-48SCA16 16 Port Distribution Box 16 Fibers 16xSC/APC Simplex Splice-Ready FDB-48SCA24 24 Port Distribution Box 24 Fibers 24xSC/APC Simplex Splice-Ready FDB-48SCA32 32 Port Distribution Box 32 Fibers 32xSC/APC Simplex Splice-Ready FDB-48SCA3x Port Distribution Box 3x(1x16 Splitters) 48xSC/APC Simplex Splice-Ready FDB-48SCA Port Distribution Box 1x16 Splitter 16xSC/APC Simplex Splice-Ready FDB-48SCA2x Port Distribution Box 2x(1x8 Splitters) 16xSC/APC Simplex Splice-Ready FDB-48SCA Port Distribution Box 2x16 Splitter 16xSC/APC Simplex Splice-Ready FDB-48SCA3x Port Distribution Box 3x(1x8 Splitters) 24xSC/APC Simplex Splice-Ready FDB-48SCA Port Distribution Box 1x32 Splitter 32xSC/APC Simplex Splice-Ready FDB-48SCA2x Port Distribution Box 2x(1x16 Splitters) 32xSC/APC Simplex Splice-Ready FDB-48SCA Port Distribution Box 2x32 Splitter 32xSC/APC Simplex Splice-Ready UPC: use SCU for SCA 23

26 Optical Distribution Box (ODB) MTU, SFU Opterna s Optical Distribution Box (ODB) product line is a robust series of outdoor-rated enclosures designed for FTTx networks. The ODB features an internal swing-out panel design with an integrated splice area that accommodates a PLC splitter, splicing and excess fiber storage. The swing-out panel also features a front face with a removable adapter plate holding SC duplex or LC quad adapters.* Features Indoor and outdoor applications IP 55 rated Compact and light, made of UV resistant polycarbonate Swing-out panel and removable adapter plate for easy installation and maintenance Integrated holder for one PLC splitter Integrated splice tray and fiber management Distribution cables can be pre-terminated or spliced to pigtails Lock with protective cap Available in different sizes, with up to 48 distribution ports Specifications Parameter ODB-100 (RAL 7016 Gray) ODB-2A (RAL 1013 Oyster) ODB-300 (RAL 7016 Gray) Dimensions 7.9w x 8.1h x 3.6d in. 9.5w x 12h x 4.2d in. 13.3w x 16.3h x 6.5d in. Feeder cable ports 2 PG16 (10 to 14mm dia.) 2 PG16 (10 to 14mm dia.) 2 ports, up to 17mm dia. Distribution cable ports 8 (2 to 7mm dia.) 16 (2 to 7mm dia.) 48 ports, up to 7mm dia. Number of adapters 4 SC duplex or LC Quad 16 SC simplex 16 SC duplex or LC Quad Splitter capacity Splice capacity Water and dust resistance IEC IP55 Impact resistance IEC IK08 Operating temperature -40 F to 149 F (-40 C to 65 C) Enclosure material Polycarbonate *Other types of enclosures are available. Please contact Opterna for further details. 24

27 Optical Distribution Box (ODB) MTU, SFU Ordering Information Part Number Product Adapters Splice Trays ODB1B (empty) ODB 100B Enclosure (with Splice Tray) Splice Tray Splice Tray ODB1B-2SDA ODB 100B 2xSC/APC Duplex Adapters 4 port SC/APC 4 port SC/APC ODB1B-4SDA ODB 100B 4xSC/APC Duplex Adapters 8 port SC/APC 8 port SC/APC ODB1B-2SDA-004 ODB 100B 4xSC/APC Pigtails and Adapters 4 Fibers 4 port SC/APC ODB1B-4SDA-008 ODB 100B 8xSC/APC Pigtails and Adapters 8 Fibers 8 port SC/APC ODB1B-2SDA-104 ODB 100B 4xSC/APC Ports, Splice Tray, Splitter 1x4 Splitter 4 port SC/APC ODB1B-2SDA-2x102 ODB 100B 4xSC/APC Ports, Splice Tray, Splitter 2x(1x2) Splitters 4 port SC/APC ODB1B-2SDA-204 ODB 100B 4xSC/APC Ports, Splice Tray, Splitter 2x4 Splitter 4 port SC/APC ODB1B-4SDA-104 ODB 100 B 8xSC/APC Ports, Splice Tray, Splitter 1x4 Splitter 4 port SC/APC ODB1B-4SDA-108 ODB 100B 8xSC/APC Ports, Splice Tray, Splitter 1x8 Splitter 8 port SC/APC ODB1B-4SDA-2x104 ODB 100B 8xSC/APC Ports, Splice Tray, Splitter 2x(1x4) Splitters 8 port SC/APC ODB1B-4SDA-208 ODB 100B 8xSC/APC Ports, Splice Tray, Splitter 2x8 Splitter 8 port SC/APC ODB-100-PMB ODB 100 Pole Mount Bracket (set of 2 per ODB) N/A N/A Substitute SDU for SC/UPC Duplex Substitute LQA for LC/APC Quad (double the ports) Substitute LQU for LC/UPC Quad (double the ports Part Number Product Adapters Splice Trays ODB-2A-8SDA-016 ODB-2A 16x SC/APC Pigtails and Adapters 16 Fibers 16 port SC/APC ODB-2A-8SDA-2x108 ODB-2A 16x SC/APC Ports, Splice Tray, Splitter 2x(1x8) Splitter 16 port SC/APC ODB-2A-8SDA-116 ODB-2A 16x SC/APC Ports, Splice Tray, Splitter 1x16 Splitter 16 port SC/APC ODB-2A-8SDA-216 ODB-2A 16x SC/APC Ports, Splice Tray, Splitter 2x16 Splitter 16 port SC/APC Substitute SDU for SC/UPC Duplex 25

28 Optical Distribution Box (ODB) MTU, SFU Ordering Information (continued) Part Number Product Adapters Splice Trays ODB3A-12DX ODB 300A 12DX Frame No Adapters 3 Splice Trays Splice Tray Splice Tray ODB3A-16DX ODB 300A 16DX Frame No Adapters 3 Splice Trays Splice Tray Splice Tray ODB3A-6SDA ODB 300A 6xSC/APC Duplex Adapters, 3 Splice Trays 12 port SC/APC 12 port SC/APC ODB3A-8SDA ODB 300A 8xSC/APC Duplex Adapters, 3 Splice Trays 16 port SC/APC 16 port SC/APC ODB3A-12SDA ODB 300A 12xSC/APC Duplex Adapters, 3 Splice Trays 24 port SC/APC 24 port SC/APC ODB3A-16SDA ODB 300A 16xSC/APC Duplex Adapters, 3 Splice Trays 32 port SC/APC 32 port SC/APC ODB3A-6SDA-012 ODB 300A 12xSC/APC Pigtails, Adapters, 3 Splice Trays 12 Fibers 12 port SC/APC ODB3A-8SDA-016 ODB 300A 16xSC/APC Pigtails, Adapters, 3 Splice Trays 16 Fibers 16 port SC/APC ODB3A-12SDA-024 ODB 300A 24xSC/APC Pigtails, Adapters, 3 Splice Trays 24 Fibers 24 port SC/APC ODB3A-16SDA-032 ODB 300A 32xSC/APC Pigtails, Adapters, 3 Splice Trays 32 Fibers 32 port SC/APC ODB3A-8SDA-116 ODB 300A 16xSC/APC Ports, 3 Splice Trays, Splitter 1 x 16 Splitter 16 port SC/APC ODB3A-8SDA-2x108 ODB 300A 16xSC/APC Ports, 3 Splice Trays, Splitter 2x(1x8) Splitters 16 port SC/APC ODB3A-8SDA-216 ODB 300A 16xSC/APC Ports, 3 Splice Trays, Splitter 2x16 Splitter 16 port SC/APC ODB3A-12SDA-3x108 ODB 300A 24xSC/APC Ports, 3 Splice Trays, Splitter 3x(1x8) Splitters 24 port SC/APC ODB3A-16SDA-132 ODB 300A 32xSC/APC Ports, 3 Splice Trays, Splitter 1x32 Splitter 32 port SC/APC ODB3A-16SDA-2x116 ODB 300A 32xSC/APC Ports, 3 Splice Trays, Splitter 2x(1x16) Splitters 32 port SC/APC ODB3A-16SDA-232 ODB 300A 32xSC/APC Ports, 3 Splice Trays, Splitter 2x32 Splitter 32 port SC/APC ODB-300-PMB ODB 300 Pole Mount Bracket (set of 2 per ODB) N/A N/A Substitute SDU for SC/UPC Duplex Substitute LQA for LC/APC Quad Substitute LQU for LC/UPC Quad 26

29 OSP Solutions Outside Plant (OSP) products often form the foundation of any reliable FTTx network. Without these products, critical links between customers and service providers could not be established/maintained. A Fiber Distribution Hub (FDH) is strategically located in the OSP to connect various inter and intra networks. Opterna s TurnOpt FDH combines unique patented features with field tested components to address plug-and-play and splice connectivity requirements. TurnOpt is also uniquely engineered to interconnect with BuildOpt, FDB Series, TAB Series and ODB Series products. For OSP applications, TurnOpt is available in either pole or pedestal mount versions. Supplementing TurnOpt is the Outdoor FTTx Demarc (DOpt), a unique interconnect device which allows for plug-and-play solutions in outdoor environments. 27

30 TurnOpt Fiber Distribution Hub Low-Density Fiber Distribution Hub OSP TurnOpt is a compact Fiber Distribution Hub (FDH) specifically designed for lowdensity topologies. Supporting up to 96 subscribers, the TurnOpt FDH is ideally suited for pole-mount, pedestal and wall-mount applications. The TurnOpt FDH features Opterna s exclusive Rotating Frame Assembly which provides 180 access to subscriber ports, the splitter module compartment, parking and cable management. A variety of splitter modules are available for use in the TurnOpt FDH. The TurnOpt FDH supports various configurations of 48, 72 or 96 subscriber drops, including direct connections to splitters or power users (express ports). Optional equipment includes splice trays or stubs or MPO panels. Features Patented rotating frame assembly Up to 96 subscribers 4 or 7 splitter module capacity Parking for 32 or 64 splitter outputs Compact size: 12.5x24.5x10 or 13.5x27.5x11.5 NEMA 4-rated OSP enclosure Approximately 25 lbs or 28 lbs. Pedestal, pole-mount, wall-mount or belowgrade options Splitter modules: 1x32, 1x16, 1x8, 2x1x16, 2x1x8 Snap-in, finger release no tools needed Telcordia GR 1209 and 1221 Exclusive Rotating Frame Assembly Polemount kit Specifications Parameter TurnOpt 1000 (48 and 72 fiber) TurnOpt 1100 (72 and 96 fiber) Dimensions 12.5w x 24.5h x 10d in. 13.5w x 27.5h x 11.5d in. Mounting Options Pole, Wall, Pedestal, Below-Grade Pole, Wall Pole Mounting Kit Part No. AH10W1-PMK AH11W1-PMK Splitter module capacity 4 7 Parking capacity 32 splitter module leads 64 splitter module leads Input fiber splice tray capacity 12F or 24F Splice Tray 12F or 24F Splice Tray Distribution fiber splice tray capacity 48F or 72F Ribbon (2 trays) 72F or 96F Ribbon (2 trays) Distribution fiber MPO connectors 4 or 6 MPOs 6 or 8 MPOs Maximum number of splice trays 3 (one Input; two Distribution) Stub cables Indoor/Outdoor G.657.A bend insensitive fiber Color Almond Beige Compliance GR-3125-CORE 28

31 OSP TurnOpt Fiber Distribution Hub Low-Density Fiber Distribution Hub Ordering Information Part Number TurnOpt Ports Product Input Type Distribution Type AH10W48-BSL100-SL SC/APC In/Out Loose Tube 24F Stub 100ft 48F Stub 100ft AH10W48-BSL250-SL SC/APC In/Out Loose Tube 24F Stub 300ft 48F Stub 300ft AH10W48-BSL500-SL SC/APC In/Out Loose Tube 24F Stub 500ft 48F Stub 500ft AH10W48-BSR100-SR SC/APC In/Out Ribbon 24F Stub 100ft 48F Stub 100ft AH10W48-BSR300-SR SC/APC In/Out Ribbon 24F Stub 300ft 48F Stub 300ft AH10W48-BSR500-SR SC/APC In/Out Ribbon 24F Stub 500ft 48F Stub 500ft AH10W48-BSR100-T SC/APC I/O Ribbon (F2 Ribbon Splice) 24F Stub 100ft 48 Fiber Splice AH10W48-BSR300-T SC/APC I/O Ribbon (F2 Ribbon Splice) 24F Stub 300ft 48 Fiber Splice AH10W48-BSR500-T SC/APC I/O Ribbon (F2 Ribbon Splice) 24F Stub 500ft 48 Fiber Splice AH10W48-BT1000-SL SC/APC F1 Splice F2 In/Out Loose Tube 24 Fiber Splice 48 Fiber Stub AH10W48-BT1000-SL SC/APC F1 Splice F2 In/Out Loose Tube 24 Fiber Splice 48 Fiber Stub AH10W48-BT1000-SL SC/APC F1 Splice F2 In/Out Loose Tube 24 Fiber Splice 48 Fiber Stub AH10W48-BT0000-SR SC/APC F1 Splice F2 In/Out Ribbon 24 Fiber Splice 48 Fiber Stub AH10W48-BT0000-SR SC/APC F1 Splice F2 In/Out Ribbon 24 Fiber Splice 48 Fiber Stub AH10W48-BT0000-SR SC/APC F1 Splice F2 In/Out Ribbon 24 Fiber Splice 48 Fiber Stub AH10W48-BT0000-T SC/APC F1 Splice F2 Splice (Ribbon) 24 Fiber Splice 48 Fiber Splice AH10W72-BSL100-SL SC/APC In/Out Loose Tube 24F Stub 100ft 72F Stub 100ft AH10W72-BSL300-SL SC/APC In/Out Loose Tube 24F Stub 300ft 72F Stub 300ft AH10W72-BSL500-SL SC/APC In/Out Loose Tube 24F Stub 500ft 72F Stub 500ft AH10W72-BSR100-SR SC/APC In/Out Ribbon 24F Stub 100ft 72F Stub 100ft AH10W72-BSR300-SR SC/APC In/Out Ribbon 24F Stub 300ft 72F Stub 300ft AH10W72-BSR500-SR SC/APC In/Out Ribbon 24F Stub 500ft 72F Stub 500ft AH10W72-BSR100-T SC/APC I/O Ribbon (F2 Ribbon Splice) 24F Stub 100ft 72 Fiber Splice AH10W72-BSR300-T SC/APC I/O Ribbon (F2 Ribbon Splice) 24F Stub 300ft 72 Fiber Splice AH10W72-BSR500-T SC/APC I/O Ribbon (F2 Ribbon Splice) 24F Stub 500ft 72 Fiber Splice AH10W72-BT1000-SL SC/APC F1 Splice F2 In/Out Loose Tube 24 Fiber Splice 72 Fiber Stub AH10W72-BT1000-SL SC/APC F1 Splice F2 In/Out Loose Tube 24 Fiber Splice 72 Fiber Stub AH10W72-BT1000-SL SC/APC F1 Splice F2 In/Out Loose Tube 24 Fiber Splice 72 Fiber Stub AH10W72-BT0000-SR SC/APC F1 Splice F2 In/Out Ribbon 24 Fiber Splice 72 Fiber Stub AH10W72-BT0000-SR SC/APC F1 Splice F2 In/Out Ribbon 24 Fiber Splice 72 Fiber Stub AH10W72-BT0000-SR SC/APC F1 Splice F2 In/Out Ribbon 24 Fiber Splice 72 Fiber Stub AH10W72-BT0000-T SC/APC F1 Splice F2 Splice (Ribbon) 24 Fiber Splice 72 Fiber Splice Pedestal Mount Available for TurnOpt 1000 (48-fiber and 72-fiber): use AH10E48 or AH10E72. Part Number Description AH10W1-PMK Pole Mount Kit for TurnOpt 1000 AH11W1-PMK Pole Mount Kit for TurnOpt

32 TurnOpt Fiber Distribution Hub Low-Density Fiber Distribution Hub OSP Ordering Information (continued) Part Number TurnOpt Ports Product Input Type Distribution Type AH11W72-BSL100-M SC/APC F1 In/Out LT F2 6x MPO 24F Stub 100ft 72F 6x MPO AH11W72-BSL300-M SC/APC F1 In/Out LT F2 6x MPO 24F Stub 300ft 72F 6x MPO AH11W72-BSL500-M SC/APC F1 In/Out LT F2 6x MPO 24F Stub 500ft 72F 6x MPO AH11W72-BSR100-M SC/APC F1 In/Out Ribbon F2 6x MPO 24F Stub 100ft 72F 6x MPO AH11W72-BSR300-M SC/APC F1 In/Out Ribbon F2 6x MPO 24F Stub 300ft 72F 6x MPO AH11W72-BSR500-M SC/APC F1 In/Out Ribbon F2 6x MPO 24F Stub 500ft 72F 6x MPO AH11W72-BSL100-SL SC/APC In/Out Loose Tube 24F Stub 100ft 72F Stub 100ft AH11W72-BSL300-SL SC/APC In/Out Loose Tube 24F Stub 300ft 72F Stub 300ft AH11W72-BSL500-SL SC/APC In/Out Loose Tube 24F Stub 500ft 72F Stub 500ft AH11W72-BSR100-SR SC/APC In/Out Ribbon 24F Stub 100ft 72F Stub 100ft AH11W72-BSR300-SR SC/APC In/Out Ribbon 24F Stub 300ft 72F Stub 300ft AH11W72-BSR500-SR SC/APC In/Out Ribbon 24F Stub 500ft 72F Stub 500ft AH11W72-BSR100-T SC/APC I/O Ribbon (F2 Ribbon Splice) 24F Stub 100ft 72 Fiber Splice AH11W72-BSR300-T SC/APC I/O Ribbon (F2 Ribbon Splice) 24F Stub 300ft 72 Fiber Splice AH11W72-BSR500-T SC/APC I/O Ribbon (F2 Ribbon Splice) 24F Stub 500ft 72 Fiber Splice AH11W72-BT0000-M SC/APC F1 Ribbon Splice F2 6x MPO 24 Fiber Splice 72F 6x MPO AH11W72-BT1000-M SC/APC F1 LT Splice F2 6x MPO 24 Fiber Splice 72F 6x MPO AH11W72-BT1000-SL SC/APC F1 Splice F2 In/Out Loose Tube 24 Fiber Splice 72 Fiber Stub AH11W72-BT1000-SL SC/APC F1 Splice F2 In/Out Loose Tube 24 Fiber Splice 72 Fiber Stub AH11W72-BT1000-SL SC/APC F1 Splice F2 In/Out Loose Tube 24 Fiber Splice 72 Fiber Stub AH11W72-BT0000-SR SC/APC F1 Splice F2 In/Out Ribbon 24 Fiber Splice 72 Fiber Stub AH11W72-BT0000-SR SC/APC F1 Splice F2 In/Out Ribbon 24 Fiber Splice 72 Fiber Stub AH11W72-BT0000-SR SC/APC F1 Splice F2 In/Out Ribbon 24 Fiber Splice 72 Fiber Stub AH11W72-BT0000-T SC/APC F1 Splice F2 Splice (Ribbon) 24 Fiber Splice 72 Fiber Splice 30

33 OSP Ordering Information (continued) TurnOpt Fiber Distribution Hub Low-Density Fiber Distribution Hub Part Number TurnOpt Ports Product Input Type Distribution Type AH11W96-ASL100-M SC/APC F1 In/Out LT F2 8x MPO 12F Stub 100ft 96F 8x MPO AH11W96-ASL300-M SC/APC F1 In/Out LT F2 8x MPO 12F Stub 300ft 96F 8x MPO AH11W96-ASL500-M SC/APC F1 In/Out LT F2 8x MPO 12F Stub 500ft 96F 8x MPO AH11W96-ASR100-M SC/APC F1 In/Out Ribbon F2 8x MPO 12F Stub 100ft 96F 8x MPO AH11W96-ASR300-M SC/APC F1 In/Out Ribbon F2 8x MPO 12F Stub 300ft 96F 8x MPO AH11W96-ASR500-M SC/APC F1 In/Out Ribbon F2 8x MPO 12F Stub 500ft 96F 8x MPO AH11W96-ASL100-SL SC/APC In/Out Loose Tube 12F Stub 100ft 96F Stub 100ft AH11W96-ASL300-SL SC/APC In/Out Loose Tube 12F Stub 300ft 96F Stub 300ft AH11W96-ASL500-SL SC/APC In/Out Loose Tube 12F Stub 500ft 96F Stub 500ft AH11W96-ASR100-SR SC/APC In/Out Ribbon 12F Stub 100ft 96F Stub 100ft AH11W96-ASR250-SR SC/APC In/Out Ribbon 12F Stub 300ft 96F Stub 300ft AH11W96-ASR500-SR SC/APC In/Out Ribbon 12F Stub 500ft 96F Stub 500ft AH11W96-ASR100-T SC/APC I/O Ribbon (F2 Ribbon Splice) 12F Stub 100ft 96 Fiber Splice AH11W96-ASR300-T SC/APC I/O Ribbon (F2 Ribbon Splice) 12F Stub 300ft 96 Fiber Splice AH11W96-ASR500-T SC/APC I/O Ribbon (F2 Ribbon Splice) 12F Stub 500ft 96 Fiber Splice AH11W96-AT0000-M SC/APC F1 Ribbon Splice F2 8x MPO 12 Fiber Splice 96F 8x MPO AH11W96-AT1000-M SC/APC F1 LT Splice F2 8x MPO 12 Fiber Splice 96F 8x MPO AH11W96-AT1000-SL SC/APC F1 Splice F2 In/Out Loose Tube 12 Fiber Splice 96 Fiber Stub AH11W96-AT1000-SL SC/APC F1 Splice F2 In/Out Loose Tube 12 Fiber Splice 96 Fiber Stub AH11W96-AT1000-SL SC/APC F1 Splice F2 In/Out Loose Tube 12 Fiber Splice 96 Fiber Stub AH11W96-AT0000-SR SC/APC F1 Splice F2 In/Out Ribbon 12 Fiber Splice 96 Fiber Stub AH11W96-AT0000-SR SC/APC F1 Splice F2 In/Out Ribbon 12 Fiber Splice 96 Fiber Stub AH11W96-AT0000-SR SC/APC F1 Splice F2 In/Out Ribbon 12 Fiber Splice 96 Fiber Stub AH11W96-AT0000-T SC/APC F1 Splice F2 Splice (Ribbon) 12 Fiber Splice 96 Fiber Splice Ordering Information (continued) Part Number Product IL (max) IL Uniformity Return Loss TSM1-108S-SCA TurnOpt 1x8 Standard Splitter 10.4 db 0.5 db max. 55 db min. TSM1-116S-SCA TurnOpt 1x16 Standard Splitter 13.9 db 1.4 db max. 55 db min. TSM1-132S-SCA TurnOpt 1x32 Standard Splitter 17.2 db 1.6 db max. 55 db min. TSM1-108P-SCA TurnOpt 1x8 Premium Splitter 10.4 db 0.5 db max. 55 db min. TSM1-116P-SCA TurnOpt 1x16 Premium Splitter 13.9 db 1.4 db max. 55 db min. TSM1-132P-SCA TurnOpt 1x32 Premium Splitter 17.2 db 1.6 db max. 55 db min. TSM2-108S-SCA TurnOpt 2x1x8 Standard Splitter 10.4 db 0.5 db max. 55 db min. TSM2-116S-SCA TurnOpt 2x1x16 Standard Splitter 13.9 db 1.4 db max. 55 db min. TSM2-108P-SCA TurnOpt 2x1x8 Premium Splitter 10.4 db 0.5 db max. 55 db min. TSM2-116P-SCA TurnOpt 2x1x16 Premium Splitter 13.9 db 1.4 db max. 55 db min. Premium: Telcordia Certified Extended Warranty; r = 5mm Ultra Bend Insensitive Fiber Standard: 3-year Warranty Operating Temperature: -40 to 185 F (-40 to 85 C) Operating Wavelength: nm Polarization Dependent Loss: 0.3 db max. 31

34 Fiber Optic, Splitter Module (GEN2 PLC) and Pass-Through Module TurnOpt Series OSP Opterna Planar Lightwave Circuit (PLC) Splitters are manufactured using silica glass waveguide circuits and extremely precise alignment of optic fibers in very small package. They split or combine light from incoming fibers to multiple numbers of outgoing fibers. They perform uniformly over a wide spectral range, with ultra-low losses. The GEN2 PLC Splitter Modules are enclosed in a chemically resistant housing and are fully compliant with Telcordia GR-326, GR-1209 and GR-1221 standards. They easily snap into and finger release from splitter slots in Opterna Fiber Distribution Hubs or Splitter Chassis (no tools required). Features Bi-directional performance with accurate split ratios Ultra-broadband range (1260 ~ 1650nm) Low insertion loss; excellent uniformity Low Polarization Dependent Loss (PDL) Low Polarization Mode Dispersion (PMD) Up to 2 input leads; up to 32 output leads Suitable for indoor or outdoor applications 2011/65/EU RoHS compliant and halogen free GR-326, GR-1209 and GR-1221 compliant Specifications Parameter Dimensions (L x W x H) Operating wavelengths Testing wavelengths Insertion loss: 1x32 (db) Specification 4.9 x 0.6 x 2.3 inches (125 x 15 x 58 mm) 1260 ~ 1650nm 1310, 1490, 1550, and 1625nm 17.4 (including SC/APC connector) Channel Uniformity (db) 1.6 Return loss / Reflectance (db) 55 Directivity (db) 55 Polarization dependent loss (db) 0.3 Wavelength dependent loss (db) 0.3 Insertion loss: connector (db) 0.3 Operating temperature Storage temperature Maximum input power Fiber type -40 F to 185 F (-40 C to 85 C) -40 F to 185 F (-40 C to 85 C) 500mW SM G.657.B3 32

35 OSP Fiber Optic, Splitter Module (GEN2 PLC) and Pass-Through Module TurnOpt Series 1x32 PLC Splitter Module Specifications Product Connector Lead Length Color Size Fiber Type SC/APC Output: 800mm+/-100mm Yellow 2.0 mm G.657.B3 1x32 PLC Splitter Module SC/APC Input: 800mm+/-100mm Blue 2.0 mm G.657.B3 12 Channel Pass- Through Module Specifications Product Connector Lead Length Color Size Fiber Type 12 Channel Pass Through Module Ordering Information SC/APC Output: 800mm+/-100mm Red 2.0 mm G.657.B3 SC/APC Input: 800mm+/-100mm Red 2.0 mm G.657.B3 Part Number Product IL (max) IL Uniformity Return Loss TSM1-108P-SCA-SL 1x8 Premium Splitter - Left Hinge 10.4 db 0.5 db max. 55 db min. TSM1-108P-SCA-SR 1x8 Premium Splitter - Right Hinge 10.4 db 0.5 db max. 55 db min. TSM1-116P-SCA-SL 1x16 Premium Splitter - Left Hinge 13.9 db 1.4 db max. 55 db min. TSM1-116P-SCA-SR 1x16 Premium Splitter - Right Hinge 13.9 db 1.4 db max. 55 db min. TSM1-132P-SCA-SL 1x32 Premium Splitter - Left Hinge 17.2 db 1.6 db max. 55 db min. TSM1-132P-SCA-SR 1x32 Premium Splitter - Right Hinge 17.2 db 1.6 db max. 55 db min. 33

36 Fiber Optic, Surface Mount Enclosure, TurnOpt Series 2000, 144 Port Slim Line Side Mount / Back Mount OSP The TurnOpt 2000 is an extremely compact, Slim Line Fiber Distribution Hub designed for low-density FTTX deployments supporting up to 144 subscribers. The TurnOpt 2000 is housed in a small form-factor enclosure that is designed for surface-mount applications where fiber is being added to existing outdoor cabinets. Opterna s patented Rotating Frame Assembly is housed inside the TurnOpt 2000 and provides 180 access to subscriber ports, express ports, splitter modules, splitter leads and cable management. Opterna s high performance PLC splitter modules are enclosed in a chemically resistant housing and are fully compliant with Telcordia GR-326, GR-1209 and GR-1221 standards. They easily snap into and finger release from splitter slots in Opterna Fiber Distribution Hubs (no tools required). Features Utilizes patented Rotating Frame Assembly technology Designed to add onto existing Outside Plant cabinets Ideal for expanding fiber distribution architectures 144 subscribers with 36 input / pass-through ports 10-splitter module capacity with parking for 170 splitter leads Slim Line design: 10W x 11D x 49H (255 x 280 x 1245mm) Adjustable Skirt (10 to 17 inches) Robust NEMA 4-rated enclosure: 49 pounds (22 kg) 2011/65/EU RoHS compliant and halogen free GR-3125/TPR-9417 approved GR-326 certified connectors Pending UL and cul listings 34

37 OSP Fiber Optic, Surface Mount Enclosure, TurnOpt Series 2000, 144 Port Slim Line Side Mount / Back Mount Specifications Mechanical data Dimensions (L x W x H) Material Door lock Cable entry ports Splitter capacity Pass-through capacity Optical data Fiber type Insertion loss Return loss Specification 49 x 10 x 11 inches (1245 x 255 x 280mm) without skirt 66 x 10 x 11 inches (1676 x 255 x 280mm) with adjustable skirt Powder coated Aluminum (color = brown) 3-point draw latch door handle (216c can wrench) RG16 ports, 0.55 inch (14mm) max. diameter 10 splitters (170 splitter lead storage) 24 Fibers (2 Pass-through Modules) Specification G.657.A1 single mode 0.30 db single mode for SC/UPC and SC/APC 0.30 db single mode for MPO db single mode for SC/UPC db single mode for SC/APC db single mode for MPO 35

38 Fiber Optic, Surface Mount Enclosure, TurnOpt Series 2000, 144 Port Slim Line Side Mount / Back Mount OSP Ordering Information (continued) Ordering Information Part Number Product Input Type Distribution Type AH20W44-DST100-ST100 SC/APC Outdoor Ribbon 48F Stub 100ft 144F Stub 100ft AH20W44-DST300-ST300 SC/APC Outdoor Ribbon 48F Stub 300ft 144F Stub 300ft AH20W44-DST500-ST500 SC/APC Outdoor Ribbon 48F Stub 500ft 144F Stub 500ft AH20W44-DST100-T0000 AH20W44-DST300-T0000 AH20W44-DST500-T0000 SC/APC Outdoor Ribbon (F2 Ribbon Splice) SC/APC Outdoor Ribbon (F2 Ribbon Splice) SC/APC Outdoor Ribbon (F2 Ribbon Splice) 48F Stub 100ft 48F Stub 300ft 48F Stub 500ft 144 Fiber Splice 144 Fiber Splice 144 Fiber Splice AH20W44-CT0000-ST100 SC/APC F1 Splice F2 Outdoor Ribbon 36 Fiber Splice 144F Stub 100ft AH20W44-CT0000-ST300 SC/APC F1 Splice F2 Outdoor Ribbon 36 Fiber Splice 144F Stub 300ft AH20W44-CT0000-ST500 SC/APC F1 Splice F2 Outdoor Ribbon 36 Fiber Splice 144F Stub 500ft AH20W44-CT0000-T0000 SC/APC F1 Splice F2 Splice (Ribbon) 36 Fiber Splice 144 Fiber Splice AH20W88-EST100-ST100 LC/APC Outdoor Ribbon 72F Stub 100ft 288F Stub 100ft AH20W88-EST300-ST300 LC/APC Outdoor Ribbon 72F Stub 300ft 288F Stub 300ft AH20W88-EST500-ST500 LC/APC Outdoor Ribbon 72F Stub 500ft 288F Stub 500ft AH20W88-EST100-T0000 AH20W88-EST300-T0000 AH20W88-EST500-T0000 LC/APC Outdoor Ribbon (F2 Ribbon Splice) LC/APC Outdoor Ribbon (F2 Ribbon Splice) LC/APC Outdoor Ribbon (F2 Ribbon Splice) 72F Stub 100ft 72F Stub 300ft 72F Stub 500ft 288 Fiber Splice 288 Fiber Splice 288 Fiber Splice AH20W88-ET0000-SR100 LC/APC F1 Splice F2 Outdoor Ribbon 72 Fiber Splice 288F Stub 100ft AH20W88-ET0000-SR300 LC/APC F1 Splice F2 Outdoor Ribbon 72 Fiber Splice 288F Stub 300f AH20W88-ET0000-SR500 LC/APC F1 Splice F2 Outdoor Ribbon 72 Fiber Splice 288F Stub 500ft AH20W88-ET0000-T0000 LC/APC F1 Splice F2 Splice (Ribbon) 72 Fiber Splice 288 Fiber Splice 36

39 Outdoor Demarc Unit (DOpt) OSP Opterna s DOpt unit is a unique outdoor enclosure that allows for the use of a variety of hardened simplex, duplex and multi-fiber connectors. DOpt can either be attached to a pole for aerial networks or placed inside pedestals for buried networks. Features UV-Resistant polycarbonate enclosure Weatherproof connectors and drop cables Built-in wall-mount features Stainless steel pole-mount brackets IP66-rated enclosure GR-771 compliant Dimensions: 10h x 6.5w x 3.8d inches Color: RAL 7016 Anthracite Grey Operating Temperature: -50 to 165 F Specifications Parameter Dimensions Material Input Port Output Ports Mounting Compliance Ingress Protection Operating Temperature Specification 6.5w x 10h x 3.8d inches (165w x 254h x 97d mm) UV Resistant Polycarbonate (RAL 7016 Gray) Cable Stub or IP-rated MPO Port IP-rated SC Simplex, LC Duplex or MPO Ports Stainless Steel Pole-mount Brackets or Built-in Wallmount Slots Per GR-771 Per IP66 Suitable for -50 F to +165 F (-45 C to +75 C) 00 = None 046 = 46m (150 feet) 003 = 3m ( 10 feet) 050 = 50m (165 feet) 006 = 6m ( 20 feet) 061 = 61m (200 feet) 010 = 10m ( 32 feet) 077 = 77m (250 feet) 015 = 15m ( 49 feet) 092 = 92m (300 feet) 020 = 20m ( 65 feet) 100 = 100m (328 feet) 023 = 23m ( 75 feet) 200 = 200m (656 feet) 031 = 31m (100 feet) 300 = 300m (984 feet) 37