FIBRE OPTIC ENCLOSURES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU

Transcription

1 FIBRE OPTIC ENCLOSURES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU

2 FIBREOPTIC RACK MOUNT ENCLOSURE: FIXED The JCS Technologies fixed rack mountable fibreoptic break out enclosure is suitable for patching or housing direct termination or splicing of up to 48 fibre cores and supports the use of both indoor and outdoor fibre cable types. Available in 1RU size. Variety of front panels Supplied with cable glands, cable anchor and internal fibre clips Suitable for various unterminated and pre-terminated cables Supports a range of splice trays Restricted spaces Direct termination of tight buffer and loose-tube cables Pre-terminated loose tube or riser cables Suitable for shallow racks where in-rack cable movement is problematic Part Number Dimensions (mm) H x W x D Weight (kg) FEF-1RU-GY 2 panel fixed fibre enclosure 1RU 43.7 x 482 x kg Max. no. of adapter plates 2 Max. Fibre Count 48 Splice Capacity 48 Max Ingress Cables 2 Supplied: cable glands, tie down point, cage nuts and internal fibre clips 2 FIBER OPTIC ENCLOSURES JCS TECHNOLOGIES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU

3 FIBREOPTIC RACK MOUNT ENCLOSURE: SLIDING JCS Technologies rack mountable sliding fibreoptic break out enclosures support the use of both indoor and outdoor fibre cable types. Suitable for patching or housing direct termination or splicing of up to 192 fibre cores. Available in 1,2 or 3RU sizes. 1,2 or 3RU sizes Variety of front panels Supplied with cable glands, cable anchor and internal fibre clips High quality, long lasting sliding mechanism Angled rear brackets Suitable for various unterminated and pre-terminated cables Supports a range of splice trays ACCESSORIES Cable management trays Labelling Low and high density use Direct termination of tight buffer and loose-tube cables Pre-terminated loose tube or riser cables Part Number FES-1RU-GY FES-2RU-GY FES-3RU-GY Dimensions (mm) H x W x D 2 panel sliding fibre enclosure 1RU 4 panel sliding fibre enclosure 2RU 8 panel sliding fibre enclosure 3RU 43.7 x 482 x x 482 x x 482 x 26.9 Weight (kg) 3.4kg 4.2kg 5.5kg Max. no. of adapter plates Max. Fibre Count Splice Capacity Max Ingress Cables 2 each side 4 each side 4 each side Supplied with cable glands, tie down point and internal fibre clips FIBER OPTIC ENCLOSURES JCS TECHNOLOGIES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU 3

4 FIBREOPTIC RACK MOUNT ENCLOSURE: CONFIGURABLE SLIDING JCS Technologies configurable rack mountable sliding fibreoptic break out enclosures support the use of both indoor and outdoor fibre and loose-tube cable types. Suitable for patching or housing direct termination or splicing of up to 96 fibre cores, they are available in 1 or 2RU sizes. ACCESSORIES Cable management trays Labelling 1 or 2RU size configurable layout Variety of front panels Conventional adapter plates or high density front panel options Supplied with cable glands, cable anchor and internal fibre clips High quality, long lasting sliding mechanism Optional flat (with four rodent proof knockouts) or angled rear brackets Suitable for various unterminated and pre-terminated cables Supports a range of splice trays Low and high density use Direct termination of tight buffer cables recommended Pre-terminated loose tube or riser cables Rodent proof installations Part Number FEG-1RU-GY FEG-2RU-GY 2 panel configurable front panel sliding fibre enclosure 1RU 4 panel configurable front panel sliding fibre enclosure 2RU Dimensions (mm) H x W x D 43.7 x 482 x x 482 x 26.9 Weight (kg) 3.7kg 4.5kg Max. Fibre Count 48 conventional / 96 high density 96 / 192 Splice Capacity Max Ingress Cables 2 each side 4 each side Supplied with cable glands, tie down point and internal fibre clips 4 FIBER OPTIC ENCLOSURES JCS TECHNOLOGIES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU

5 FIBREOPTIC RACK MOUNT ENCLOSURE: SWING FRAME The JCS Technologies rack mountable swing frame fibreoptic break out enclosure supports the use of loose tube fibre and riser cable types. It is suitable for patching or housing direct termination or splicing of up to 48 fibre cores. Available in 1RU size. Variety of front panels Supplied with cable glands, cable anchor, and internal fibre clips Suitable for loose tube and riser cable termination Supports a range of splice trays Low and high density use and direct termination Pre-terminated or spliced loose tube Part Number Dimensions (mm) H x W x D Weight (kg) FEH-1RU-GY 2 panel swing frame fibre enclosure 1RU 43.7 x 482 x kg Max. no. of adapter plates 2 Max. Fibre Count 48 Splice Capacity 48 Max Ingress Cables 1 Supplied with cable anchor, cage nuts (4) and internal fibre clips FIBER OPTIC ENCLOSURES JCS TECHNOLOGIES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU 5

6 FIBREOPTIC INDOOR WALL MOUNT ENCLOSURE The JCS Technologies indoor wall mountable fibreoptic break out enclosure supports the use of loose tube fibre and riser cable types. It is suitable for patching or housing direct termination or splicing of up to 48 fibre cores. Accommodates two standard adapter panels. Variety of front panels Supplied with cable glands, tie down point and internal fibre clips Double hinged lockable door Rear brackets with four rodent proof knockouts Suitable for various unterminated and pre-terminated cables Supports a range of splice cassettes Low and high density indoor use Pre-terminated or spliced loose tube or riser cable Rodent proof installations Part Number Dimensions (mm) H x W x D Weight (kg) FEW-2P-GY 2 panel wall mount enclosure 335 x 260 x kg Max. no. of adapter plates 2 Max. Fibre Count 48 Splice Capacity 48 Max Ingress Cables 2 (top and bottom) Supplied with cable glands, tie down point and internal fibre clips 6 FIBER OPTIC ENCLOSURES JCS TECHNOLOGIES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU

7 FIBREOPTIC COMPACT DIN RAIL MOUNT ENCLOSURE The JCS Technologies compact DIN rail mountable fibreoptic break out enclosure supports the use of indoor fibre cable types. It is suitable for patching or housing direct termination or splicing of up to 24 fibre cores via 2 compact adapter panels. Supports 2 compact front adapter panels from the mini DIN range (see below) Supplied with cable glands, tie down point, internal fibre clips and DIN rail clip Suitable for various unterminated and pre-terminated cables Supplied with compact splice holder Low and high density indoor use Pre-terminated or spliced loose tube or riser cable COMPACT DIN ENCLOSURE ORDERING Rodent proof installations Part Number FEC-GY 2 panel compact DIN enclosure Dimensions (mm) H x W x D 100 x 65 x 110 Weight (kg) 0.9kg Max. no. of adapters 2 Fibre Count / Splice Capacity 24/24 Max Ingress Cables 2 (top or bottom options) Supplied with cable glands, cable anchor and internal fibre clips COMPACT ADAPTER PANEL ORDERING CONNECTOR TYPE SCS - SC Simplex LCD - LC Duplex STS - ST Simplex BBB - Blank FIBRE TYPE FAD XXX XX XX XX MM - Multimode SM - Singlemode SA - Singlemode APC ADAPTER COLOUR AQ - Aqua BE - Beige BB - Blank ADAPTER PLATE NUMBERING 06-1 to to 12 BU - Blue GN - Green ME - Metal FIBER OPTIC ENCLOSURES JCS TECHNOLOGIES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU 7

8 FIBREOPTIC DIN RAIL MOUNT ENCLOSURE JCS Technologies DIN rail mountable fibreoptic break out enclosures support the use of indoor fibre cable types. They are suitable for patching or housing direct termination or splicing of up to 48 fibre cores. Supports 1 or 2 standard front adapter panels Supplied with cable glands, tie down point, internal fibre clips and DIN rail clip Can be wall mounted Screw fit lid Rear brackets with four rodent proof knockouts Suitable for various unterminated and pre-terminated cables Supplied with compact splice holder Low and high density indoor use Pre-terminated or spliced loose tube and riser cable Rodent proof installations Part Number FED-1P-GY FED-2P-GY Dimensions (mm) H x W x D Single panel DIN rail mount fibre enclosure Two panel DIN rail mount fibre enclosure 181 (205 incl. flanges) x 46 x (205 incl. flange) x 72 x 181 Weight (kg) 1.3kg 1.5kg Max. no. of adapter plates 1 2 Max. Fibre Count Splice Capacity Max. Ingress Cables 2 2 Supplied with cable glands, tie down point and internal fibre clips 8 FIBER OPTIC ENCLOSURES JCS TECHNOLOGIES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU

9 COMPACT MODULAR DIN RAIL MOUNT FIBREOPTIC ENCLOSURE JCS Technologies Compact Modular DIN rail mountable fibreoptic break out enclosures support the use of indoor fibre cable types. They are suitable for patching or housing direct termination or splicing of up to 24 single fibre cores or four 12-fibre ribbons. Simplex / duplex / quad connector adapters are front-panel mounted, while MPO adapter ports are in top and bottom panels. Modular construction expandable to higher capacity DIN rail or wall mount via rear bracket attachment Supplied with cable glands, tie down point, internal fibre clips and DIN rail clip Screw fit front panel supports 6 LCQ or SCD or 12 STS adapters Top and bottom cable attachment knockouts MPO compatible via knockouts Suitable for various unterminated and pre-terminated cables Supplied with compact splice holder Low and high density indoor use Pre-terminated or spliced loose tube and riser cable Rodent proof installations Part Number FEE-SCD-GY FEE-ST-GY Compact Modular DIN rail mount fibre enclosure Adapter type SCD/LCQ STS Dimensions (mm) H x W x D 165 x 55 x 110 Weight (kg) 0.8 Max. Fibre Count 24 Splice Capacity 24 Max. Ingress Cables 2 2 Supplied with cable glands, tie down point, DIN rail clip and internal fibre clips FIBER OPTIC ENCLOSURES JCS TECHNOLOGIES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU 9

10 FIBREOPTIC ENCLOSURE ADAPTER PANELS JCS Technologies Adapter Panels for rack, wall and DIN mountable enclosures support a variety of cable and connector types and configurations. Combine these with the JCS range of pigtails, cables, connectors, patch cords and assemblies for a high quality result. Range of adapter types and colours Variety of plate configurations Easy to add / remove before or after installation Supplied loaded or unloaded Rack mount enclosures Wall mount enclosures DIN enclosures Blank Panel Capacity Generic Order Code FAA-F-B LCD/SCS/E2K/MTRJ flat 12 FAA-F-LCD-XX-12-XX-XX LCD/SCS/E2K/MTRJ angled 12 FAA-R-LCD-XX-12-XX-XX LCQ/SCD flat 6 FAA-F-SCD-XX-06-XX-XX LCQ/SCD angled 6 FAA-R-SCD-XX-06-XX-XX STS/FCS flat 12 FAA-F-STS-XX-12-XX-XX Blanking Plugs Pack Size Order Code LCD/SCS/E2K/MTRJ 12 FAB-LCD LCQ/SCD 6 FAB-SCD STS/FCS 12 FAB-STS ORDERING INFORMATION PLATE STYLE L - Angled Left R - Angled Right F - Flat FAA X XXX XX XX XX XX ADAPTER COLOUR AQ - Aqua BE - Beige BB - Blank BU - Blue GN - Green ME - Metal CONNECTOR TYPE SCS - SC Simplex SCD - SC Duplex LCD - LC Duplex LCQ - LC Quad BBB - Blank STS - ST Simplex FCS - FC Simplex E2K - E2000 MTR - MT-RJ CCC - Custom FIBRE TYPE MM - Multimode SM - Singlemode SA - Singlemode APC FIBRE CORES ADAPTER PLATE NUMBERING 12-1 to to to to to to to to FIBER OPTIC ENCLOSURES JCS TECHNOLOGIES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU

11 FIBREOPTIC THROUGH ADAPTERS The JCS Technologies range of high quality zirconia sleeve through adapters includes all the most common types in reduced flange style for easy patch panel integration. High quality Zirconia sleeve design LC, SC, MTRJ, FC and ST types Dust caps supplied Colour coded to IEC standard Telcordia GR-326 compliant Style Adapter Type Code Colours Multimode Types LC/PC LC Duplex LCD AQ, BE LC Quad LCQ AQ, BE SC/PC SC Simplex SCS AQ, BE SC Duplex SCD AQ, BE MT-RJ MTRJ Duplex MTR BE FC/PC FC Simplex FCS ME ST/PC ST Simplex STS ME Singlemode PC Types LC/PC LC Duplex LCD BU LC Quad LCQ BU SC/PC SC Simplex SCS BU SC Duplex SCD BU FC/PC FC Simplex FCS ME ST/PC ST Simplex STS ME Singlemode APC Types LC/APC LC Duplex LCD GN LC Quad LCQ GN SC/APC SC Simplex SCS GN SC Duplex SCD GN FC/APC FC Simplex FCS ME ORDERING INFORMATION Use the Adapter Plate Order Guide for populated adapter plates, or order adapters separately using the guide below. The JCS Technologies Passive Products guide details a comprehensive range of adapters available including standard flange, hybrid and legacy types. CONNECTOR TYPE SCS - SC Simplex SCD - SC Duplex LCD - LC Duplex LCQ - LC Quad STS - ST Simplex FCS - FC Simplex E2K - E2000 MTR - MT-RJ FFT XXX XX XX FIBRE TYPE MM - Multimode SM - Singlemode SA - Singlemode APC ADAPTER COLOUR AQ - Aqua BE - Beige BU - Blue GN - Green ME - Metal FIBER OPTIC ENCLOSURES JCS TECHNOLOGIES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU 11

12 FIBREOPTIC ENCLOSURES ACCESSORIES JCS Technologies supplies a full range of accessories for rack, wall and DIN mountable enclosures. Combine these with the JCS range of pigtails, cables, adapters, patch cords and assemblies for a high quality result. CABLE TRAYS JCS cable management trays fit the fixed, sliding and configurable rack mountable enclosures and assist with organisation and identification of patchleads. Part Number FAC-50 FAC-100 FAC-100L Cable Tray 50mm width Cable Tray 100mm Cable Tray w/ label holder 100mm SPLICE TRAY AND HINGES JCS splice trays are compatible with the full range of rack, wall and DIN mount enclosures, and provide neat and reliable splice organisation. Splice trays can be stacked up to 8 high (in 3RU enclosure) to support up to 192 splices. Hinges (supplied separately) facilitate access, while the snap-on cover provides protection. Part Number FAS-50 FAH-50 Splice Tray, 24 Fibre 200 x 121 x 24 mm Stackable with snap-on cover and 4x pan-head screws Splice Tray Hinge (set of 2) SPLICE PROTECTORS Restore the environmental and mechanical integrity of optical fibre cables after fusion splicing. Telcordia / ROHS compliant. Wide range - ask JCS for of non-standard sizes/colours. Part Number FAP-M-25 FAP-M-30 FAP-M-40 FAP-S-40 FAP-S-45 FAP-S-61 Mini 1.6mm Standard 2.6mm Length (mm) ACCESSORIES KIT Spares and replacements for enclosure installation. Part Number FCA-50 kit - cable glands (2), cable anchor, cage nuts (4) and internal fibre clips (2) LOCAL MANUFACTURE, SERVICE AND SUPPORT JCS TECHNOLOGIES PTY LTD U1, 5-11 Mellor Street, West Ryde NSW 2114 T: F: E: sales@jcstech.com.au