Rack Mount Interconnect Center (RIC3)

Transcription

1 Rack Mount Interconnect Center (RIC) The RIC provides the best overall value for exceptional fiber management. The RIC enclosure offers superior fiber density (up to 88 fibers in just U) without sacrificing fiber protection and accessibility. Features include a fully removable tray, improved labeling, standard front and rear door locks, and single-finger door latches. With superior cable management, port identification, fiber accessibility and security, the RIC is the best way to protect mission critical fiber connections. Removable Tray The RIC cable management tray is fixed in place, but can be removed from the front or rear of the enclosure and moved to a work table for more convenient loading. Latching and Locking The RIC features a single-finger latch on both front and rear doors. Front and rear doors include a lock for added security Quick-Pack Adapter Plates Siemon Quick-Pack adapter plates can be inserted or removed with a single-finger latch for quick and easy access to fiber connections. Quick-Release Hinges Spring loaded quick-release hinges enable easy removal of front and rear doors for complete access to fiber connections Enhanced Labeling Label virtually any port configuration with our hinged labels. The labels hang on the front door for improved visibility. When the door is opened, labels flip down allowing ready viewing of the label and corresponding ports Rotating Grommets Patented rotating grommets facilitate loading and retention of jumpers and fiber while minimizing microbending stress when using the sliding tray Complete Access Management tray has a positive stop in both front and rear working positions providing complete access for moving, adding, changing, or cleaning of fiber connections Maximum Capacity The RIC enables a maximum amount of fibers to be patched or patched and spliced in a,, and U enclosure without compromising accessibility. This allows more efficient utilization of rack space Superior Design Top and bottom access holes located at the rear of the enclosure allow fibers to be routed between tandem enclosures without having to run fibers outside of the enclosure 7.

2 RACK MOUNT INTERCONNECT CENTER (RIC) Siemon RIC enclosures are designed for enhanced fiber management and ease of use. They are compatible with an array of Siemon fiber Quick-Pack adapter plates for your choice of fiber adapters and port density (see page 7.7). RIC to 9-port Rack Mount Interconnect Center, accepts () Quick-Pack adapter plates, U, black height: 8.mm (. in.), width: mm (7.00 in.), depth: 80mm (.9 in.) RIC to -port Rack Mount Interconnect Center, accepts () Quick-Pack adapter plates, U, black height: 8.mm (. in.), width: mm (7.00 in.), depth: 80mm (.9 in.) RIC to 9-port Rack Mount Interconnect Center, accepts (8) Quick-Pack adapter plates, U, black height: mm (. in.), width: mm (7.00 in.), depth: 80mm (.9 in.) RIC to 88-port Rack Mount Interconnect Center, accepts () Quick-Pack adapter plates, U, black height: 78mm (7.00 in.), width: mm (7.00 in.), depth: 80mm (.9 in.) Note: U =.mm (.7 in.) Note: All RIC products include laser-printable labels*, cable ties, rack-mounting hardware, and pre-installed fiber management clips. *Visit for labeling software. MAXIMUM RIC FIBER CAPACITY # FIBERS PER QUICK-PACK ADAPTER OPTIONS RIC RIC RIC8 RIC7 ST, SC ST, SC 8 9 ST, SC LC LC MAXIMUM SPLICING CAPACITY SPLICE TYPE RIC RIC RIC8 RIC7 Fusion

3 Wall Mount Interconnect Center (SWIC) The Wall Mount Interconnect Center (SWIC) is a cost-effective fiber enclosure designed to manage and protect up to 9 fiber connections. The low-profile, compact design makes it ideal for telecommunications rooms or other installation areas where wall space is a premium. The adapter mounting method is standardized on the same snap-in Quick-Pack adapter plates used in our family of Rack Mount Interconnect Centers (RIC). Easy Access Doors on enclosures and jumper guard swing open a full 80 to provide complete front and side access. Dual-Level Fiber Managers Incorporates two independent levels of storage to enable the fiber to be routed at levels that correspond to the adapters. Snap-In Adapter Plates Utilizes same Quick-Pack adapter plates as RIC enclosures with integrated latches for snap-in installation and single-finger removal. Convenient Labeling Convenient labeling system includes removable clear label holders for storing and protecting fiber documentation Door Options Doors on enclosure and jumper guard can be ordered with independent key lock or latching options Optional Splice Tray Bracket Optional bracket available for mounting multiple splice trays (not shown) Available with Quick-Pack Adapter Plates Quick-Pack adapter plates are available with SC, ST, or LC adapters Fiber Jumper Guard Integrated hinged fiber guard provides jumper protection and management Accessories Dust-proofing grommets included MAXIMUM SWIC FIBER CAPACITY MAXIMUM SPLICING CAPACITY # FIBERS PER QUICK-PACK ADAPTER OPTIONS SWIC-M SWIC ST, SC 8 ST, SC ST, SC 8 LC LC 8 9 SPLICE TYPE SWIC-M SWIC Fusion N/A* 8 * SWIC-M does not accept splice trays 7.

4 WALL MOUNT INTERCONNECT CENTER (SWIC) SWIC-(X) to 9-port Wall Mount Interconnect Center, black. Includes dual-level fiber managers, port designation labels and removable pocket, dust-proofing grommets, strain relief hardware, cable ties, and mounting hardware. height: mm (. in.), width: mm (. in.), depth: 8.mm (. in) Use (X) to specify type of lock on the enclosure: A = key lock, C = thumb-turn latch SWICG-(X)(X) to 9-port Wall Mount Interconnect Center with integrated jumper guard, accepts () Quick-Pack adapter plates, black. Includes dual-level fiber managers, port designation labels and removable pocket, dust-proofing grommets, strain relief hardware, cable ties, and mounting hardware. height: mm (. in.), width: 0mm ( in.), depth: 8.mm (. in) Use st (X) to specify type of lock on the enclosure (left) door: A = key lock, C = thumb-turn latch Use nd (X) to specify type of lock on the guard (right) door: A = key lock, C = thumb-turn latch TRAY-B Bracket for mounting up to mini splice trays to SWIC base MINI WALL MOUNT INTERCONNECT CENTER The SWIC enables the economical interconnection of fiber in locations where wall space is limited while still providing many of the popular, installer-friendly features of the SWIC. By accepting two flat Quick- Pack adapter plates, the SWIC can accommodate from -8 fibers. Also included are dust-proofing grommets to provide protection from contaminants and bend radius guides to ensure proper storage of fiber slack. SWIC-M to 8-port Mini Wall Mount Interconnect Center, accepts () Quick-Pack adapter plates, black height: 8.mm (8. in.), width: 8.mm (7. in.), depth: 8.mm (. in.) 7.

5 Fiber Connect Panel (FCP) Siemon s popular Fiber Connect Panels (FCP-DWR and FCP-RACK) economically connect, protect, and manage up to 7 fibers/u. It accepts Siemon s Quick-Pack adapter plates with patented singlefinger access. The FCP-DWR makes access to the connections easy via a fixed tray that can be released and slid out of the front or rear of the enclosure. High Density FCP enclosures accommodate up to 7 fibers in only U on a 9 inch rack. Sliding Tray The FCP-DWR (drawer version) features a tray that slides out from the front or rear, providing easy access to fiber connections. The entire tray can be removed and placed on a work table for more convenient termination. Lanced Tabs Provide convenient cable anchor points for incoming jacketed fiber cable Up to Optional Splice Trays Can be mounted to manage and protect either mechanical or fusion splices Front Fiber Clips Manage up to duplex fiber jumpers (7 fibers total) Rear Fiber Clips Manage cable slack while maintaining minimum bend radius requirements Label Holder Protects fiber jumpers and is readily removable via release of factory-installed snap-latches MAXIMUM FCP FIBER CAPACITY MAXIMUM SPLICING CAPACITY # FIBERS PER QUICK-PACK ADAPTER OPTIONS FCP ST, SC 8 8 ST, SC ST, SC, LC LC 8 LC 7 SPLICE TYPE FCP Fusion 7 7.

6 FIBER CONNECT PANEL (FCP) FCP-DWR to 7-port Fiber Connect Panel with sliding tray, accepts () Quick-Pack adapter plates, U, black. Includes mounting brackets, housing/tray, fiber managers, grommets, label holders, and labels height:.mm (.7 in.) width: 8.mm (9.0 in.) depth:.mm (.0 in.) FCP-RACK to 7-port Fiber Connect Panel with fixed tray, accepts () Quick-Pack adapter plates, U, black. Includes mounting brackets, housing/cover, fiber managers and grommet height:.mm (.7 in.) width: 8.mm (9.0 in.) depth:.mm (9. in.) Note: U =. mm (.7 in.) COMPRESSION FITTINGS Compression fittings are utilized as an enhanced method for securing cables to FCP fiber enclosures. Acme threads on the body prevent skipping, allowing for faster installations of locknuts. FCP-DWR FCP-RACK CF-(XX) Compression fitting Use (XX) to specify fiber diameter: 0 =.8.9mm (0. 0. in.), =. 8.0mm ( in.), 0 =.0.mm ( in.) SPLICE TRAYS (XGLO AND LIGHTSYSTEM ) These aluminum trays come with a clear, snap-on polycarbonate cover and can be stacked for high-density applications. The standard tray holds up to splices. The minitray for use with the SWIC, accommodates up to splices. TRAY Standard splice tray for up to fusion splices with sleeve protection. For use with RIC and FCP fiber enclosures TRAY-M Mini splice tray for up to fusion splices with sleeve protection. For use with SWIC enclosures TRAY- Standard Tray Dimensions height: 0mm (.07 in.), width: 98mm (.7 in.), depth: 8.mm (0. in.) TRAY-M- Mini Tray Dimensions height: 0mm (.07 in.), width: 79mm (7.0 in.), depth: 8.mm (0. in.) 7.

7 HEAT SHRINK SLEEVES Heat shrink sleeves provide a safe and efficient method for protecting fusion splices on either 0 or 900 micron coated fibers. Heat shrink sleeves are threaded on to fibers prior to fusion splicing and then positioned directly over splice and heated via an oven or heat gun.* HT mm (.7 in.) heat shrink sleeve HT mm (. in.) heat shrink sleeve *Heating times may vary depending on heat source. QUICK-PACK ADAPTER PLATES Siemon s patented Quick-Pack adapter plates feature an integrated latch, which provides single-finger access to fiber even in fully populated enclosures. XGLO & LIGHTSYSTEM RIC-F-SC duplex SC adapters ( fibers) RIC-F-SC duplex SC adapters (8 fibers) RIC-F-SC duplex SC adapters ( fibers) RIC-F-LC duplex LC adapters ( fibers), beige adapters RIC-F-LC quad LC adapters ( fibers), beige adapters RIC-F-LC quad LC adapters ( fibers), beige adapters RIC-F-LCU duplex LC adapters ( fibers), blue adapters (not shown) RIC-F-LCU quad LC adapters ( fibers), blue adapters (not shown) RIC-F-LCU quad LC adapters ( fibers), blue adapters (not shown) LIGHTSYSTEM RIC-F-SA duplex ST adapters ( fibers) RIC-F-SA duplex ST adapters (8 fibers) RIC-F-SA duplex ST adapters ( fibers) Only recommended for push-pull ST connectors due to access constraints RIC-F-BLNK Blank adapter plate Each adapter plate with icon pockets includes red, blue, black, and clear icons with paper labels. All SC and ST adapters are universal to support multimode and singlemode. 7.7