High Intensity Flexible LED Accent Lighting 5-YEAR WARRANTY F L E X I B L E L E D L U M I F L E X L E D S I M U L AT E D N E O N

Transcription

1 High Intensity Flexible LED Accent Lighting FEATURES Dotfree linear neonlike illumination Fabricated with Ecofriendly, UVresistant silicone material V2 flame retardance Flexible PCB with SMD LED technology 24V DC low voltage, safe and reliable Cutting mark by every 1.97in culus Listed, CE RoHS certified 5year manufacture warranty Min. bending diameter 1.97in 5YEAR WARRANTY DETAILS Input VAC Output VDC Max. Load Footage... ft. Watts per Foot... Dimming Capable... Yes Bending Parameters in. Limited Warranty Terms... 5 Years Materials... Silicone Dimensions x 0.40 Certification... culus E335482, CE APPLICATIONS Signage lighting Outdoor/indoor decoration lighting Contour application Channel Letters SPECIFICATIONS Part No./ Color White 6500K White 4000K White 3000K Red Orange Golden Rod Green Blue Footage Wattage per foot Lumens per foot *LumiFlex systems based on Mean Well 185W, 24 VDC, LED Driver HLG185H24A / Number of LEDs/ft. 40 PROFILE AND MINIMUM BEND DIAMETER UNIT: cd C0/180,237.5 C90/270,112.8 AVERAGE BEAM ANGLE (50%):175.2 DEG

2 TOOLS REQUIRED OPTIONAL ACCESSORIES CHART A. Simple Version B. With Silicone End Fitting Version Power supply connector set Power supply connector set Interconnection connector setf End Cap set Silicone End Cap Interconnection L connector set Installation aluminum profile, ft/pc, with 3pcs fixing clips encased in bar Silicone glue (45ml) MOUNTING CHANNEL Selflocking Aluminum Mounting Channel Fixed Channel without Light Fixed Channel with Profile Light

3 TYPES OF LED FLEX 2 Neon light options, only different on the connectors You may choose any for your project. N24 A. Simple Version B. With Silicone End Fitting Version TYPES OF CONNECTORS End Exit Cable Connects light to power supply with preinstalled bottom cable, IP67. Standard 2.4in cable length (For longer lengths please contact us). Linear Reconnector Connects two pieces of light together with the reconnection kits. IP67 Connectors L Shape Reconnector Connects two pieces of light together with a L joint. IP67 Connector. End Cap Termination protection of the light. IP

4 POWER CONNECTOR INSTALLING GUIDE (STEP 1STEP 5) Power connector structure Insert the pin (NOTE: Pin should be on the back of PCB) Put silicone at the joint of strip and the housing connector, then put the strip into the housing Step 4 Close the housing after silicone Step 5 Final power connector picture

5 END CAPS INSTALLING GUIDE (STEP 1STEP 5) End cap structure Insert the end cap into the strip Put silicone at the joint of strip and the housing Step 4 Close the housing after silicone Step 5 Final end cap picture

6 RECONNECTOR INSTALLING GUIDE (STEP 1STEP 5) Reconnector structure Insert the pin into the strip (NOTE: Pin on the back of PCB) Put silicone at the joint of strip and the housing WARNING: Make sure the pins are inserted on the copper side. Step 4 After silicone, close the housing Step 5 Final reconnection picture

7 END CAP INSTALLING GUIDE (STEP 1STEP 3) End Cap structure Apply Silicone at the end of strip, put on the end cap. Final End Cap Picture WARNING No Twisted operation Cutting profile should be flat No flexing horizontally DC 24V Cutting mark No 90 bending No bending repeatedly NOTE: Scissor marks are just a guide. LEDs under silicone can vary PAST the scissor marks. Add approximately 0.5 of extra material to overall length. (example: 20 section would be 20.5 to allow room for error)