Neon light FP Range. Specification NE-FPP-VB. Rev2.0.

Transcription

1 Neon light Range Specification NE-P-VB 01 Rev2.0

2 Table of Contents Introduction Specifications & Parameters 1.1 Dimensions of Light 1.2 Technical Parameters 1.3 Optical Parameters 2. Functions & Features 2.1 Product Features 2.2 Minimum Bend Diameter 3. Types of Connector 3.1 Injection-Moulded Connector 3.2 Sleeve Connector 3.3 Snap Connector 3.4 Anti-wicking Ferrule 3.5 Male & Female Connector 4. Mounting Profile & Clip 4.1 Standard Aluminum Profile 4.2 Plastic & Aluminum Combination Profile 4.3 Plastic Profile 4.4 Plastic Clip 5. Compatible Control System 5.1 LT- 5.2 LT-800 & LT LT Packaging 7. Appendix 7.1 Product Naming Convention 7.2 Certificate 7.3 Third-Party Test Report 7.4 Reliability Test of Light 7.5 (X,Y) Chromaticity Diagram 7.6 Wavelength of Colour Light 7.7 Correlated Colour Temperature 7.8 Loading chart

3 Introduction NE-P is a member of the Galaxy of Light series embodied all the benefits of with the addition of DMX addressable technology, generating advanced chasing and programmable scenes and complete animated visual effects. NE-P is UL/cUL, CE, TUV and RoHS compliant. Moreover, it has passed rigorous environmental resistance, optical, mechanical and electrical tests in our lab under the support of advanced experimental equipments and technology to ensure it meets the requirements of harsh environments. Also it has passed relevant tests of third party inspection authority. Fully encapsulated in the flexible PVC chamber by utilizing consummate extrusion technology, assembled with multiple patented connectors to achieveip67 protection, easy for installation and applicable for various circumstances. NE-P features the capability of offering breathtaking colour changing and impressive animated effects such as colour chasing, waves, colourful gradients, sync jumping and fading, etc. when paired with DMX controller, also colour consistent LEDs and strong illumination with exquisite appearance. Applications: 1. Outdoor or Indoor Contour Lighting 2. Architectural Decorative Lighting 3. Cove/Accent Lighting 4. Background Lighting 5. Signage /Advertisement Lighting 03

4 1. Specifications & Parameters 1.1 Dimensions of Light 150 Beam Angle 10% D:50mm Bending Diameter IP65 Protection 3 Years 6mm 15.5mm Note: Unless otherwise stated, the tolerance of the light is ±0.3mm. 1.2 Technical Parameters Technical Parameters Article No. NE-P NE-P NE-P NE-P Colour IC Type RGB UCS2903 All Single Colour UCS2903 W+WW( K) UCS2903 RGBW(2700/4500/6500K) UCS2904 Working Voltage DC24V DC24V DC24V DC24V Rated Power/m 12W 12W 10W 15W LED Qty/m LED Distance 17.8mm 17.8mm 16.7mm 17.8mm Min. Cutting Unit 7LEDs (1 pixel) 7LEDs (1 pixel) 6+6LEDs (1 pixel) 7LEDs (1 pixel) Min. Cutting Length 125mm (1unit) 125mm (1unit) 100mm (1unit) 125mm (1unit) Continuous Length 15m (Dynamic Operating ) 15m (Dynamic Operating ) 15m (Dynamic Operating ) 10m (Dynamic Operating ) 10m (Static Full Loading) 10m (Static Full Loading) 10m (Static Full Loading) 5m (Static Full Loading) Weight/m 129g Storage Temperature -20 ~ 60 NE-P NE-P NE-P Environmental Working Temperature -20 ~ 45 Environmental Installation Temperature 0 ~ 45 IP Rating IP Optical Parameters Article No. NE-P (single colour) NE-P (RGB/RGBW) LED Type SMD SMD Beam angle 10% Colour Wavelength Lumen Colour CCT Lumen Wavelength Lumen Red nm >lm 2700K 2725±145K >650lm nm >75lm Green nm >500lm 3000K 3045±175K >650lm nm >185lm Blue nm >100lm 3500K 3465±245K >650lm nm >40lm Amber nm >lm 4000K 3985±275K >650lm R+G+B >300lm 4500K 4503±243K >650lm 2725±145K >250lm 5000K 5029±283K >650lm 4503±243K >250lm 5700K 5669±355K >650lm 6532±510K >250lm 6500K 6532±510K >650lm 04

5 2. Functions & Features 2.1 Product Features 1. High quality SMD LED & IC Chip. 2. UCS2903/2904 IC, SPI signal input, DMX512 signal compatible, DMX address writable or programable. 3. UV & flame resistant construction(pvc). 4. Patent optical design with custom C for optimum thermal management. 5. Smooth colour mixing & high illumination. 6. Flexible with 50mm minimum bending diameter. 7. Easy installation and assembly with DIY accessories for joining and terminating. 8. High IP rating(ip67). 9. The product IP rate is ultimately in line with properly applied IP rated connectors. 10. Continuous length up to 15m by powering one end. 11. Environmentally friendly & energy efficient. 12. Automated production, high reliability & long warranty years life span. 2.2 Minimum Bend Diameter Light Surface Φ50 mm Light Surface The light can only be bent along the light surface. Do not bend smaller than allowed minimum bend diameter. 3. Types of Connector 3.1 Injection-moulded Connector Note: Unless otherwise stated, the tolerance of the connector is ±0.5mm. Injection-moulded Front Connector Connects light to power supply with pre-installed front feed cable, IP65.Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. 30mm 19.5mm 20mm 7mm 9mm Φ9mm 10mm 05

6 Injection-moulded End Cap 20mm 19.5mm Pre-installed termination protection of the light, IP65. 20mm 7mm 9mm 19.5mm Injection-moulded Jumper Connects two pieces of lights together with a flexible cable. IP65 Injection-moulded connector. L available in 0.3~1m. Maximum 8 Jumpers in 20m Maximum 4 Jumpers in 10m Injection-moulded T-feed Connects two pieces of lights together with a T joint, energized from middle. IP65 Injection-moulded connector. L1 and L2 available in 0.15~0.5m. L3 available in 0.3-3m. Maximum 8 T-feeds in 20m Maximum 4 T-feeds in 10m 06

7 3.2 Sleeve Connector Sleeve Front Connector 22mm Connects light to power supply. IP40 DIY connector. Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. 20mm Feed connector*1(three-pin) PC cover*1 Anti-skidding clip*1 Heat-shrink tube*1 39mm 10.5mm Sleeve End Cap 20mm Termination protection of the light. IP40 DIY connector. Shading sheet*1 PC Cover*1 10.5mm 15mm Sleeve Middle Connector Combine two pieces of lights together. IP40 DIY connector. 57mm 19.5mm Pin connector*1 (Three-pin) PC cover*2 Anti-skidding clip*2 Heat-shink tube*1 11mm Sleeve Jumper Connects two pieces of lights together with a flexible cable. IP40 DIY connector. L available in 0.3m, 1m and 3m. Double-end feed connector*1(threepin) PC cover*2 Anti-skidding clip*2 Heat-shrink tube*2 L Sleeve Power T-feed Connects two pieces of lights together with a T joint, energized from middle. IP40 DIY connector. L1 and L2 available in 0.3m. 50mm L2 T joint*1(three-pin) PC cover*2 Anti-skidding clip*2 Heat-shrink tube*2 L1 07

8 17mm 3.3 Snap Connector Note: Unless otherwise stated, the tolerance is ±0.5mm. Snap Front Connector(top end) 20.5mm 23.5mm Connects light to power supply. IP67 DIY connector. Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. 14mm Feed connector*1(three-pin) Silicone gasket*1 U steel plate*1 Anti-skidding clip*1 PC cover*1 26.5mm 17mm 49mm 56mm Snap Front Connector(side right/left) 57mm Connects light to power supply. IP67 DIY connector. Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. 13mm R L Feed connector*1(three-pin) Silicone gasket*1 U steel plate*1 Anti-skidding clip*1 PC cover*1 26.5mm 17mm Snap Front Connector(bottom) 57mm Connects light to power supply. IP67 DIY connector. Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. 13mm Feed connector*1(three-pin) Silicone gasket*1 U steel plate*1 Anti-skidding clip*1 PC cover*1 26.5mm 17mm Snap End Cap 17.7mm 23.5mm Termination protection of the light. IP67 DIY connector. Tail plug*1 Silicone gasket*1 U steel plate*1 Anti-skidding clip*1 PC cover*1 26.5mm 47mm 14mm Snap Middle Feed Connector Interconnect two pieces of lights together with power cable. IP67 DIY connector. 26.5mm 98mm 11mm Double-end feed connector*1 Silicone gasket*2 U steel plate*2 Anti-skidding clip*2 PC cover*2 23.5mm 13.5mm 18mm Snap Middle Connector Interconnect two pieces of lights together. IP67 DIY connector. 26.5mm 98mm 11mm Bidirectional feed connctor*1 Silicone gasket*2 U steel plate*2 Anti-skidding clip*2 PC cover*2 23.5mm 13.5mm 18mm 08

9 Snap Jumper Connects two pieces of lights together with a flexible cable. IP67 DIY connector. L available in 0.3m, 1m and 3m. L Double-end feed connector*1 (Three-pin) Silicone gasket*2 U steel plate*2 Anti-skidding clip*2 PC cover*2 Snap Power T-feed Connects two pieces of lights together with a T joint, energized from middle. IP67 DIY connector. L1 and L2 available in 0.3m. L1 L2 T joint*1 (Three-pin) Silicone gasket*2 U steel plate*2 Anti-skidding clip*2 PC cover*2 50mm 3.4 Anti-wicking Ferrule Note: Unless otherwise stated, the tolerance is ±0.5mm. Anti-wicking Ferrule The anti-wicking ferrule is located at 115mm (±5mm tolerance) from the connector on the cable. Φ15mm For protection against water ingress from inside of cable wire and hence damage the light. 30mm 3.5 Male & Female Connector Note: Unless otherwise stated, the tolerance is ±2mm. Male & female Connector For plug and play cable junction, DIY or Pre-installed connector, IP68 50mm 21mm 09

10 4. Mounting Profile & Clip 4.1 Standard Aluminum Profile 9.5mm 17.5mm Note: Unless otherwise stated, the tolerance of the profile is ±0.5mm. L2 mm L1 Model W*H(mm) Standard Length (mm) L1 (mm) L2 (mm) Screw Hole (mm) Hole Number For Product / 1 NE-P-CH 17.5* Plastic & Aluminum Combination Profile 11.2mm 19mm L1 L2 Note: Unless otherwise stated, the tolerance of the profile is ±0.5mm. mm Model W*H(mm) Standard Length (mm) L1 (mm) L2 (mm) Screw Hole (mm) Hole Number For Product NE-P-CH 11.2* /

11 8.0mm 10 mm 5.7 mm 4.3 Plastic Profile 8.8mm 17mm L1 L2 Note: Unless otherwise stated, the tolerance of the profile is ±0.5mm. mm Model W*H(mm) Standard Length (mm) L1 (mm) L2 (mm) Screw Hole (mm) Hole Number For Product NE-P-CH 17* PC Clip 8.0 mm 37 mm Φ4.5mm Note: Unless otherwise stated, the tolerance of the clip is ±0.5mm. 11

12 5. Compatible DMX Control System (Recommended) 5.1 LT- Unit 1. SPI signal output, control light directly to achieve max.540 lighting effects. 2. Support third-party DMX 512 interface, it can be realized DMX management mode, invoke controller s most function by DMX console. 3. It can work as DMX-SPI decoder, using DMX 512 console to control every channel and program new changing effect. Suitable for controlling maximum 100m by series connection and each length maximum 15m. 5.2 LT-800 & LT-DMX-1809 Unit LT-800 LT LT-1809 decoder works to convert DMX512 digital signal to SPI (TTL) digital signal, realizing the function of 0~100% dimming or editing all sorts of change effect. 2. LT-800 DMX512 controller works with LT-1809 decoder to control lights. 3. Each LT-800 DMX512 controller can con trol max. 32 sets LT-1809 decoders. Suitable for relatively large projects; each decoder can control max. 15m lights. 5.3 LT-600 Unit 1. Offline SD card store request programme. Ethernet real time computer control via synchronous display. 2. DMX 512 and SPI signal outputs are optional; can be connected with DMX console to form lighting control network. 3. Extra large control capability, 16 channels signal output, max. control pixels. Suitable for large projects; each channel can control max. 120m lights, each LT-600 can control around 1600m lights. Note: The Pixel Addressable Light series allows precise control of every cutting increment. To ensure IC chips receive strong control signals, please adhere to the parameters listed below. 1) To ensure strong signal the 3-wire signal cable should not exceed 10m. 2) For cable lengths longer than 10m, a signal amplifier must be used for strong signal transmission. Please ask our technical team for more details. 12

13 6.Packaging Packaging Method Plastic Plate White Box Carton Packaging Detail Light Length White Box Dimension (cm) Carton Dimension (cm) Numbers of White Box Carton Weight (kg) 10m 35*4.2*46 48*37* m 45*4.2*56 58*47* m 61.5*4.2*72 74*63.5*

14 7. Appendix 7.1 Certificate Certificating Type Testing Organization Certificate Serial Number Report Reference UL 2108 UL E E CE-EMC SGS SZEM LMV SZEM Third-Party Test Report Testing Item RoHS IP68: Screw type IP68: Clasp type IPX8: Molding type IPX8: Snap type Flame retardant Light PVC Testing Organization SGS TUV SUD SGS SGS SGS TUV SUD AOV AOV Report Number CANEC A GZES GZES GZES GZES GZES SZES SZES SZES GZES A002R R01 A002R R01 >>Note: The testing reports and certificates are available from the related official website. 14

15 7.3 Reliability Test of Light TESTING ITEM PHOTOMETRIC TESTING PERFORMANCE Spectrum Analysis Photometric Distribution Lumen Maintenance & Life Time STANDARD/REFERENCE VALUE/DESCRIPTION IES LM 79 (lumen, CCT, CRI, XY, SDCM, wave length) IES LM 79(lumen intensity distribution & Lux diagram) IES LM84 & IES TM28 TEMPERATURE RISE TESTING Normal Temperature Test Abnormal Operation Test UL1598 & UL2388 & IEC & IEC UL1598 & UL2388 & IEC & IEC MECHANICS & PHYSICS TESTING Bending Test Swing Test Tensile Test Twist Test Ball Impact IK07 IK08 Manufacturer-defined, 500 cycles UL2388, >750 cycles Manufacturer-defined, > the weight of light in maximum connection length with both ends feed Manufacturer-defined, > cycles UL1598 & UL2388 & IEC & IEC IEC62262 WEATHERING TESTING Swimming Pool Water Immersion Test Sea Water Immersion Test Salt Spray Test Outdoor Exposure GB9667, PH , free chlorine mg/L IEC , Salinity 4% IEC Manufacturer-defined ENVIROMENT TESTING Flame Resistant Test UV Exposure Test IPX5 IPX6 IPX7 IPX8 UL94 ASTMG 154,ISO , IEC60529 ENDURANCE & THERMAL TEST LAB Temperature Shock Test Constant Temperature Test Manufacturer-defined, (typical temperature range) Manufacturer-defined,70 (typical temperature) 7.4 Wavelength of Colour Light nm 530nm 540nm nm green 550nm 560nm Red nm nm nm nm 0.1 cyan blue white violet (1'3,1'3) yellow 580nm 590nm orange red 600nm 620nm 650nm 770nm Green Blue 470nm nm 380nm

16 7.5 (X,Y) Chromaticity Diagram y K 3500K 4000K 4500K 5000K 2700K 2500K 2K K 6500K x 7.6 Correlated Colour Temperature ANSI STANDARD Nominal CCT Categories Nominal CCT 2K 2500K 2700K 3000K 3500K 4000K 4500K 5000K 5700K 6500K Target CCT and tolerance(k) 2238 ± ± ± ± ± ± ± ± ± ±510 Target D uv D uv Tolerance Range Tx:CCT of the source For Tx<2870K 0.000± For Tx 2870K Duv(Tx)± where Duv(Tx)=57700 x (1/Tx) x (1/Tx) Remark: 1) T F is chosen to be at 100K steps (2300,2400,,6400K),excluding the ten nominal CCTs listed in Table ) ΔT=1.1900x10 xt x10 xt xT ) Same as in the D uv Tolerance Range. Flexible CCT (2-6500K) T F uv ΔT T F 1) 2) ± D 3) 7.7 Loading Chart Type. Rated Power /mtr 6.5w/7.2w/8w Power Supply 35w 60w 75w 80w 100w 120w 150w 120w 150w 185w 240w 320w 3.5m 6m 7.5m 8m 10m 12m 15m 18.5m 24m 30m NE-P 10w/11w/12w 2m 4m 5m 5m 6.5m 8m 10m 12m 16m 20m 15w 1.5m 3m 4m 4m 5m 6m 7m 10m Energizing way Note : 1. These are the light maximum recommended running length subject to selected power supply. 2. For example: It is recommended to use one 80W power supply loading maximum 8m light (7.2w/m) or maximum 5m light (12w/m) by energizing the light one end. 16