Flexible LED strip - 24 VDC

Transcription

1 Kurba dimensions Kurba Horizontal & W is a direct view, small profile, energy efficient and flexible LED strip suitable for wet locations capable of horizontal bends up to 2.5 radius. Built with robust factory made power feeds or joiners, Kurba Horizontal mounts to a specifically designed aluminum extruded channel. Applications: Outdoor wet location 24 VDC Operating temperature -4 F to 113 F (-2 C to 45 C) Average life 5, hours Approvals Class 2 wet listed, IP67 Warranty 3 years.85 UP TO 26 Technical information W (4K) CANDLE POWER DISTRIBUTION LEDS/ft KBM--XX KBM-W-XX Light output Red: 6 lm/ft Green: 23 lm/ft Blue: 6 lm/ft All on: 34 lm/ft Red: 12 lm/ft Green: 37 lm/ft Blue: 8 lm/ft White: 38 lm/ft All on: 95 lm/ft Average power consumption at W/ft 4.57 W/ft Ordering increment Maximum run length (in series) 26 ft 2 ft UNIT: CD C/18 C9/ UNIT: CD C/18 C9/27 SECTION START/END OPTIONS End power feed (72 wire lead) Bottom power feed (72 wire lead) Side power feed (72 wire lead) End cap Ordering code for straight run KBM-F-H KBM - Kurba medium, flat horizontal COLOR - Red, Green, & Blue W - Red, Green,Blue, & White (4K) SECTION START EPF SECTION END IEC view table above for REV page 1 of 5 tel:

2 Kurba System Run Sample layout Ordering Code for system layout: KBM-F-H--EPF-3-JC-3-JC-3-EC power supply controller controller power supply Ordering Code for straight layout: KBM-F-H--EPF-EC-1 decoders Kurba decoders Kurba joiner 3. joiner 3. SECTION START/END OPTIONS End power feed (72 wire lead) Bottom power feed (72 wire lead) Side power feed (72 wire lead) Factory Joiner Ordering code for system run KBM-F-H KBM - Kurba medium, flat horizontal COLOR - Red, Green, & Blue W - Red, Green,Blue, & White (4K) SECTION START EPF FIXTURE view table on page 1 for JOINER TYPE JC JC - Joiner FIXTURE view table on page 1 for SECTION END EC Each system run must be kept under power supply max wattage. Refer to page 4 for power supply information. Additional runs can be added to system, by continuing the same ordering code logic reference sample above. Mounting Accessories & Optional Connectors aluminum channel Part # MC-KBM-F-H-78 mounting bracket, recommended every 8 inches Part # MB-KBM-F-H-2IN Splice Box: Wet rated, low voltage splice box, gray Part # LVSP-WET Connector: Low voltage splice box wet cable management gray Part # LVSP-WET-CM REV page 2 of 5 tel:

3 Power consumption per fixture length Based on operation with PSD series of power supplies. Actual length of Kurba endcap LED W Nominal Actual W/ft Total wattage Actual W/ft Total wattage / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / REV page 3 of 5 tel:

4 Power supply See fixture and power supply instructions & spec sheet for wiring information. Dimming possible in select models - view Luminii website for list of compatible dimmers. Non-Dimming: POWER OUTPUT DIMMING LOCATION PSV PSV - PSV Series W 6-6 W W 24V VDC - Requires a controller & a decoder to work properly U2ND U2ND - Non Dimming S D D - Dry Location IP65 - Wet Location PSV Dry PSV Wet C A B Width A B C Depth DMX: C B PSDMX PSDMX - DMX Power Supply POWER WATT 3X96-3 X 96 WATT - Features eldoled s LINEARdrive configurable dimmable drivers OUTPUT VDC S A B Width C Depth 96 W x 96 W A DMX-3Z-W W LED 1 or 3 Zone Controller DMX /Wireless -W wall-mount controller controls DMX lighting fixtures, wireless control of -W lighting fixture or use both simultaneously. Fits in any standard US switch box. Includes all the outputs in the back of the controller. DMX DMX - DMX controller Control brightness levels with a single touch, personalize and memorize 3 different scenes, and even create 3 variations of white. Zones 3Z 3Z - Three Zone 1Z - One Zone Color W W - Red, Green, Blue & White 12-24V DC Features 2 in 1 in-wall Controller: DMX Control or Wireless -W 65, Color Options, Dimming and Speed Control Memory Function 5 Foot Wireless Range Easily Fits Standard US Switch Boxes Touch Sensitive Glass Surface Includes 1 Built in Programs, or Create and Play Your Own Color parameters Brightness Saturation Primary colors Fading Color changing speed REV page 4 of 5 tel:

5 Touch DMX Controller Touchscreen digital LED controller TSDMX-E TSDMX-E - Touchscreen DMX controller Programmable advanced DMX512 lighting controller featuring a touchscreen interface. Operates as stand alone controller or integrated with most architectural lighting control systems. Can controller endless DMX512 enabled devices. Mounts to standard single or dual gang wall box with the included power supply inside the junction box. Terminal block design for power and data connections. Power supply 7 VDC (included) Programmability PC, Mac, Tablet, Smartphone Output signal DMX512 (124 channels) Color parameters Brightness Saturation Speed of color changing sequence Fading / dimming / brightness Key Features Sleek glass design which sits from the wall Graphical color display to show selected environment Color/dimmer/speed palette Color temperature mixing Touch sensitive buttons. No mechanical parts Touch sensitive wheel allows for accurate color selection Multi-zone microsd memory Multi-room control with 5 scenes, 1 zones 124 DMX channels. Control 34 fixtures USB & Ethernet connectivity for DMX decoder DMX signal to W decoder (required to operate DMX controller) Translates controller DMX512 programs for and white LED strips. Unique DMX address for the decoder can be set easily and displayed by the numeric display on the case. Changing and resetting the DMX address requires manual input. Use power repeater to expand output VDC Power capacity up to 96W at 24V Operating temperature range from -4 F to +122 F in case DDMX-W DDMX-W - DMX decoder REV page 5 of 5 tel: