esata_pcie PCI-Express SATAII host adapter with 1x esata & 1x SATA connector esata_pcie2 PCI-Express SATAII host adapter with 2x esata connectors

Transcription

1 esata_pcie PCI-Express SATAII host adapter with 1x esata & 1x SATA connector esata_pcie2 PCI-Express SATAII host adapter with 2x esata connectors User s Guide

2 DATOptic Inc reserves the right to make changes to the products or specification to improve performance, reliability, or manufacturability. Information furnished ins believed to be accurate and reliable, but DATOptic Inc shall not be responsible for any errors that may appear in this document. DATOptic, Inc. makes no commitment to update or keep current the information contained in this document. However, no responsibility is assumed for its us; nor any infringement f patens or other rights of third parties which may result from it sues. No liability is assumed as a result of their use or application. No rights under any patent accompany the sales of any such products or information. DATOptic, Inc. products are not designed or intene3ded for use in Life support System. A Life S8upport System is a product or system intended to support or sustain life, which if it failed, can be reasonably expected to result in significant personal injury or death, If Buyer or nay of its direct or indirect customers applied any product purchased or license from DATOptic, Inc. to any such unauthorized use, Buyer shell indemnify and hold DATOptic Inc, its affiliates and their respective suppliers, harmless against all claims, costs, damages and expenses arising directly or indirectly, out of any such unintended or unauthorized use even if such claim alleges that DATOptic Inc or any other person or entity was negligent in design to manufacture the products. Specifications are subject to changes without notice.

3 Contents 1 Getting Start Package contents System requirements References esata_pcie Specifications 2 Installing the esata_pcie Install the esata_pcie card Install the Disk Drives/Devices Install External Devices in the esata_pcie Install the Driver Microsoft Windows 2003 Server and Windows XP To complete the drivers installation To confirm the drivers installation Microsoft Windows 2000 To complete the drivers installation To confirm the drivers installation Mac OS X installation To complete the drivers installation To confirm the drivers installation

4 1 Getting Started This Installation Guide describes how to install the DATOptic, Inc. esata_pcie(2) host bus adapter, Serial SATA II devices and device drivers. Package Contents: 1x esata_pcie(2) 1x CD_ROM drive and Document System Requirements Processor Type: - Intel Pentium, Celeron or Xeon system, (or equivalent AMD Opteron or Athlon system) for Windows OS. - G5 for Macintosh systems Operating System: - Windows 2000 with Service Pack 4 or later - Windows XP with Service Pack 2 or later - Windows 2003 with Service Pack 1 or later - Mac OS 10.4.x or later One available PCI-Express compliant slots At least one available SATA device CD/DVD-ROM drive esata_pcie(2) Specification Figure 1 esata_pcie

5 Figure 1 esata_pcie(2) Specification esata_pcie esata_pcie2 Ports 1x esata and 1x SATA 2x esata Form Factor PCI-Express 1x lane; low profile Temperature 0 C to 55 C (32 F to 131 F) Humidity Operating: 5% to 80%m non condensing, Non-operating 5% to 95% non condensing Install the esata_pcie(2) The esata_pcie(2) Serial ATA II card will fit into any available PCI-Express slot in your workstation or server computer systems ( see figure 3) Figure 3

6 1. Turn off your system. 2. Remove the cover of your system 3. Remove the inside slot cover of an available PCI-Express on you system motherboard 4. Install the esata_pcie(2) host adapter into the open PCI-express slot, secure the host adapter by tighten the PCI bracket to system frame 5. Replace the cover of your system. Install the SATA drives or SATA devices The esata_pcie(2) host adapter supports up to Two SATA devices or port multipliers. For optimal performance, install SATA drives of the same model and capacity, this allows the logical disk to function best as a single drive (RAID 0, RAID 1 or RAID 5 mode) Install external devices on the esata_pcie(2) 1. Attach one end of Serial ATA data cable to each Serial SATA device, example SATA HDD. 2. Then attach the other end of the cables to the esata connectors on the esata_pcie(2) 3. Power on the external SATA device 4. Boot up the system 5. Depend with your OS; your external SATA may able to hot plug to your system. Install the Driver The procedure in this section assume the Windows and MAC operating system has been installed on your computer Microsoft Windows 2003 Server and Windows XP After you install the esata_pcie(2) and the external devices then power on your computer system, the Found New Hardware Wizard will open. 1. Insert the esata_pcie(2) CD-ROM media 2. Select Install the software automatically (Recommenced) and click Next.

7 3. When installation is complete, click Finish. To confirm the driver installation 1. Right click at My computer icon on your desktop and choose Manage from the pop-up menu, 2. Double click Device Manager 3. Double click SCSI and RAID controllers 4. Verify the Silicon Image Sil 3132 SATALink controller appears, as shown below.

8 Microsoft Windows 2000 After you install the esata_pcie(2) and the external devices then power on your computer system, the Found New Hardware Wizard will open. 1. Insert the DATOptic SATA Drivers CD-ROM media into CD/DVD-ROM Drive, Click Next 2. Select Search for a suitable driver for my device (Recommended) and click Next. 3. Select CD-ROM, and click Next

9 4. Click Next once the driver is found. 5. If you get the Digital Signature Not Found message. Click YES to continue installation 6. When the installation is complete. Click Finish and reboot the system

10 To confirm the driver installation After reboot the computer system 1. Right click on My Computer icon on your desktop and choose Properties 2. Select Hardware then Device Manager 3. Double click SCSI and RAID controllers 4. Verify that the Silicon Image Sil3132 SATALink Controller appear, as shown below.

11 MAC OS X Installation After you install the esata_pcie(2). 1. Power on your computer. 2. Insert DATOptic SATA Drivers CD-ROM 3. Open the MAC Folder and click the Sil3132.pkg installer. 4. Click Continue

12 5. Review provided Readme. Click Continue 6. Review the License agreement. Click Continue.

13 7. Click Agree to accept the terms of the License agreement and proceed with the installation. 8. Select the system hard drive

14 9. Click Upgrade to install driver 10. Enter the user name and password for the root account. Click OK

15 11. Click Continue Installation to acknowledge the restart warning 12. Click Restart to reboot the computer and complete the installation

16 To confirm the driver installation In case of a driver installation failure, an error message will display after you reboot the computer. Follow the recommendation in the error message. If you have question or comment please us at tech@datopit.com Thank you for choosing DATOptic Inc., products