805HP. Handheld Digital Weight Indicator User s Manual (V1703) Website: Anyload Transducer Co.Ltd. anyload.

Transcription

1 805HP Handheld Digital Weight Indicator User s Manual (V703) Anyload Transducer Co.Ltd Website: anyload.com

2 TABLE OF CONTENTS. Introductions and Features 2 2. Safety Recommendations 2 3. Display Icon List 3 4. Keys 4. Key List 4.2 Key Instructions for all weighing modes Work Modes 5. Overview 5.2 Operation Mode Switching Diagram Start Up and Adjust 6. Battery Installation 6.2 Indicator Dimensions 6.3 Connection Diagrams HP Wired Model HP Wireless Model Weighing Modes 7. Normal Weighing Mode 7.. Basic Operations in Normal Weighing Mode 7.2 Gross / Net Mode 7.3 Peak Mode 7.4 Cumulate Mode 7.5 Calibration Mode Configurations and Menu Operations 8. Menu Operations 8.2 Overload 8.3 Modify Password Communication 9. RS232 Communication 9.2 Wireless Communication Calibration and Parameter Settings 0. Standard Value Calibration 0.2 Digit Calibration. Troubleshooting Guides 2. Technical Specifications 3. Appendices 3. Seven-segment digital display alphanumeric table 3.2 Gravitational acceleration in different countries ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703)

3 . Introductions and Features Thank you for choosing Anyload 805HP Handheld Digital Weight Indicator. The 805HP hand held digital weight indicator is a general purpose and durable indicator that provides high accuracy, reliability and multiple functions. The 805HP can drive up to eight 350Ω or thirty two 000Ω load cells. With an IP65 ABS wash down enclosure, the 805HP digital weighing indicator is ideal for use in Transportation, Entertainment, Aerospace, Military, Food and Agricultural industry. Key Features include: ØExceptionally long battery life ( 3 AA batteries ) ØLED backlight and panoramic FSTN LCD view angle ØMaterial: ABS ØIP Rating: Ip65 ØLCD 6-digit display with LED backlight ØNon-volatile memory for reliable data saving ØUnits of Measurement: kg, g, t, lb, Klb, N, kn, oz, user-defined unit ØConfigurable 2 set-points for precaution and warning ØUser-selectable display interval ØOverloading recording Ø0 user-selectable analog-to-digital converting frequency ØWeight calibration and digital calibration ØUser-selectable auto power-off and power-saving timing ØFunctions: Auto-Zero Tracking, Auto-Zero, Manual-Zero, Hold, Peak-Hold, TARE This manual provides installation, operation and configuration information of 805HP indicator. It is recommended to go through the manual in details before installing, operating or configuring the indicator. 2. Safety Recommendations Important instructions which involve safety are highlighted with the appropriate mark: ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703) 2

4 When it is required to work inside the indicator enclosure for some procedures described, the work can only be performed by qualified technical personnel. 3. Display Icon List Icon 805HP Battery Power indicator Peak hold mode Weights saved to memory Tare value acquired Gross weight mode Cumulate Mode Scale is zeroed Wireless signal strength Meaning Load cell battery power indicator (dotted line) Weight exceeded the maximum capacity overload warning value signal Signal stability There are hidden figures which can be shown on the following page Refer to Section 3 (Appendices) for detailed on alphanumeric symbols. (Appendix 3.-Seven Segment digital display alphanumeric table) 3 ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703)

5 4. Keys 4. Key List Key Functions Power Button Tare; Down key Unit; Left key Zero; Up key; Return key Peak; Right key Cumulate; Enter key ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703) 4

6 4.2 Key Instructions for all weighing modes Buttons Press Modes Duration Normal Peak Cumulate Short Press (0.5 sec) SWITCH Long Press (2 sec) Short Press (0.5 sec) CUMULATE Long Press (2 sec) Short Press (0.5 sec) Turn Off Turn Off Turn Off Accumulate (Add weight to memory) Show cumulative value Zero the scale Show cumulative value Exit cumulate mode ZERO Long Press (2 sec) Clear cumulative value Short Press (0.5 sec) Holding / Cancel Clear peak value HOLD Long Press (2 sec) Go to Peak mode Return to Normal Weighing Mode Short Press (0.5 sec) Tare / Untare TARE Long Press (2 sec) Gross / Net Weight Gross / Net Weight Short Press (0.5 sec) Switch units Switch units UNITS Long Press (2 sec) 5 ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703)

7 5. Work Modes 5. Overview Operation mode Power-off Operation mode Power-saving Function When the indicator is turned off, date will be saved in non-volatile memory. When the indicator enters wake-up mode, all functions are enabled and the power run dynamically. When LCD is on and backlight is off, the RS232 circuit is off. 5.2 Operation Mode Switching Diagram Long press on/off button for 2-3 seconds Power-off No operation in setting time Long press on/off button for 2-3 seconds Any button can wake up Weighing Mode Powersaving No operation in setting time ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703) 6

8 6. Start Up and Adjust 6. Battery Installation Open the battery compartment cover and install the battery as shown in figure below. Note: Remove the battery when indicator will not be used for a long period. ØStart up-after installing the battery, long press the on / off button for 2-3 seconds then release it. The indicator will beep and the screen shows initialization until reached to indicator weighing system. ØPower off: Long press on / off button for 2-3 seconds then release it. The screen shows OFF, the indicator is turning off. 6.2 Indicator Dimensions 7 ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703)

9 L L L2 L2 H2 H W H L3 (Unit) inches mm H H H2 L L L2 L3 W ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703) 8

10 6.3 Connection Diagrams HP Wired Model Connect load cell (communication & printer) to 805HP according to the following connection diagram: AVAILABLE OPTION Communication & Printer Load Cell Sense- Yellow Shield Exc+ Red Sig+ Green Exc - Black Sig - White Sense+ Blue kg Klb kn toz UN GND Black RXD Red (Communication & Printer) TXD Green (Communication & Printer) 9 ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703)

11 HP Wireless Model The indicator is set to match the corresponding wireless transceiver of a wireless scale. Usually 805HP-WL wireless model is paired with Anyload 0RH-WL TENSLINK scale or 0ES-WL Salt Waterproof scale. If you need to change the indicator s wireless configurations due to radio frequency interference, you can configure the communication parameters with the following steps in Section 9.2 Wireless Communication of this manual. 7. Weighing Modes The indicator has three (3) weighing modes namely, Normal Mode, Cumulate Mode and Peak Mode. The indicator will automatically set to Normal Mode upon starting it up. Usually it will be zeroed automatically when it is within the 20% of the full range zero range. ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703) 0

12 7. Normal Weighing Mode Normal Mode is the most common application in weighing mode which is enabled by default in the indicator. This mode meets most of the weighing requirements. The Normal Mode is the real-time feedback and the accurate weighing. When indicator is set to the Normal Weighing mode, appear in the display 7.. Basic Operations in Normal Weighing Mode I. Zero the Scale II. Acquire Tare Value (Peak mark) will not Remove the loads from the scale and wait until [Stable mark] appears. The scale should not in Tare mode and [Gross weight mark] is on. Press ZREO and [Zero mark] appears. Zero the scale setting is completed. When no Tare is stored [Tare mark] does not appear. Place the load on the scale and wait until [Stable mark] appears. Press TARE, the tare weight will be stored. The display is in Net weight when [Tare mark] is displayed and [Gross weight mark] is off. ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703)

13 III. Remove Stored Tare Value When indicator has stored tare weight value other than 0, [Tare mark] appears. Press Tare to remove the stored tare weight value. The display is in Gross weight mode when [Tare mark] is off. 7.2 Gross / Net Mode When tare weight is stored (indicator has stored tare weight value other than 0), press TARE to change from net weight to gross weight or vice versa. [Gross Weight mark] appears if it is in gross weight mode. [Gross Weight mark] disappears if it is in net weight mode. 7.3 Peak Mode Peak Mode is a weighing mode which indicator shows and hold the peak weight value in the process of weighing. This mode is typically applied to a system when recording the peak reading of weights. To activate Peak Weighing Mode, long press appears I. Peak / Normal Weighing Mode HOLD and [Peak mark] ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703) 2

14 When [Peak mark] appears, peak mode is activated. The display always shows the maximum value of load which has been applied to the load cell. When the load is removed, the display still shows the peak load. When [Peak mark] disappears, peak mode is deactivated. The value shown on display changes according to the load applied to the load cell. Long press the HOLD can change the indicator from Peak mode to Normal Weighing mode, or vice versa. II. Remove Peak Mode Value When Peak mode is on, [Peak mark] appears. Remove the load and the HOLD button. The peak mode value is removed and indicator will start another Peak mode operation. 7.4 Cumulate Mode Cumulate Mode is a special function added under the normal weighing mode. In this mode, the indicator saves weight readings into memory and previews the accumulated weight value for all saved weight readings. Both real-time feedback weighing data can also check the cumulative weighing value. I. How to cumulate weighing values? Only and during in the normal weighing mode and if the indicator reading is more than zero or when the weight has been tared, to record the current weight data. Indicator shows as follows: The recently saved weight readings will be displayed in the screen after one second. The sign appears in the lower left corner of the screen. This means that weight data are recorded and be accumulated. 3 ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703)

15 II. How to view the cumulative value? Long press the and it shows the cumulative value. The sign appears in the middle of the screen. Indicator shows as follows: Long press, indicator changes from Cumulate to Normal weighing mode or peak mode, or vice versa. III. Gross / Net Mode Press vice versa. TARE, the indicator changes from Gross mode to Net mode, or Display shows total gross weight value - [Gross Weight mark] is on. Display shows total net weight value - [Gross Weight mark] is off. IV. Clear Cumulative Value Long press ZERO, the total gross weight value and total net weight value will be cleared. 7.5 Calibration Mode In this mode, you have to enter the menu and parameter settings module. (Refer to Section 0 for the Calibration of the scale system) ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703) 4

16 8. Configurations and Menu Operations 8. Menu Operations I. Menu Settings ZERO TARE UNITS HOLD CUMULATE long press Add/delete decimal point II. Menu Operations Entering the menu: Press at the same time for -2 seconds, the indicator will show the password interface: Short press or Choosing digit Short press Increasing the numerical value of the digit. Short press Decreasing the numerical value of the digit. The default password is: P ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703)

17 III. Menu Layout Structure and Navigation key operation Level Menu- Level 2 Menu- Parameter- Value- Level Menu-2 Level 2 Menu-2 Parameter-2 Same as above Value-2 Level Menu-N Level 2 Menu-N Parameter-N Same as above Value-N IV. Menu Structure and Parameter Description There are 4 directional keys,,, to be used for the operation., are used for horizontal movement in the same level menu and parameters., are used for moving up and down through different level menus. Use, to choose a parameter in a menu and use to move to the next level menu or parameter. When moving into a parameter of a menu, the indicator shows the previous choice. If you want to change the parameter values, use to move into the parameter change status. When the parameter of a menu is a fixed value, use, to move horizontally. Use to store the selected parameter and to return to the last menu. When a parameter value of a menu is editable, diretional keys, are used to edit the digit selected, directional keys, are used to increase and decrease the value of the selected digit. Press to save the input values and exit. ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703) 6

18 In the actual menu structure, the selected menu item is displayed horizontally. The parameter value with the symbol [ ] is the default value of system reset. Level Menu Level 2 Menu Description Parameter Value Note buzzer switch [on]/off Backlight switch [on]/off Background light turn off time/ S dis//2/3/5/[0] /5/20/30/60? dis? means that the backlight is always on (Basic parameter Settings) Auto off time /min Unit kg Unit t Unit g Unit lb Unit oz Unit Klb Unit N Unit kn User s unit [dis]//2/3/5/0 /5/20/30/60 [on]/off on/[off] on/[off] on/[off](related to the software mode) on/[off](related to the software mode) on/[off](related to the software mode) on/[off](related to the software mode) on/[off](related to the software mode) on/[off](related to the software mode)? dis? means that the indicator will not be power-off automatically 7 ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703)

19 (Overload setting) (Weighing coefficient setting) User s unit coefficient Default unit Overload Warning Overload Warning value Overload Alarm Overload Alarm value Historical maximum overload value Division value Rated Weighing Sampling speed/hz Stability Judgement times/s Stability Judgement range/d Acceleration of gravity value Any Number (related to the software mode) kg/t/g/lb/oz/klb /N/kN/UN [on]/off Any Number [on]/off Any Number (read only) 0.00/0.002 /0.005/0.0/0.02 /0.05/0./0.2/0.5 /[]/2/5/0/20 /50 Any Number 4.7/6.25/8.33/ [0]/2.5/6.7/ 33.2/50/62/23 0.5/[]/2 0./0.2/0.3/0.4/ [0.5]/0.75//.25 /.5/.75/2/2.5/3 /3.5/4/5 Any Number See: Note ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703) 8

20 Zero A/D count (read only) (Standard value Calibration) - - Calibrated weight Calibrated point A/D count (read only) (read only) Detailed operating method is as follow: 4.4. Detailed method to Standard value Calibration (Digit input calibration) (RS232 setting) - - Zero offset value Input the Zero A/D count Input the corresponding calibration value manually Input the corresponding calibration A/D code manually Serial communication Baud rate/ bps Output DB Communication mode (read only) Any Number Any Number Any Number on/[off] [200]/2400/ 4800/9600 [8n]/8o/8e [Contin]/reque Detailed operating method is as follow: Detailed method to Digit Calibration See: note2 See: note3 9 ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703)

21 (Wireless setting) (System parameter) Wireless transmission frequency Wireless address Wireless output Automatic channel search Manual switching channel [2Hz]/3Hz/4Hz/ 5Hz Any Number on/[off] -6 Wireless gain -8 Software (read only) version System parameter reset Software [None]/OIML/ mode NTEP/Canada See: noet4 Used with caution! 8.2 Overload I. Records Overload. This indicator records the real time overload situation. When load weight exceeds the overload alarm set value, the background light flashes (if background light is enabled), the panel shows (warning), the display flashes, and shows the error message ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703) 20

22 2. When load weight exceeds the overload alarm set value, the background light flashes (if background light is enabled), the panel shows (warning signs), the display flashes, shows the error message, and the buzzer warns intermittently. 3. If, overload weight exceeds the historical maximum overload weight, the historical maximum overload weight will be updated. You can find the maximum overload in the menu. 8.3 Modify Password Press the, key, and hold for second, indicator pops up the password interface. Press the arrow keys,,, Enter the password 08050, then press key, display shows the password menu (PWORD). Press to enter. The first parameter is the user s password (USER P), press to enter, display the current password, for example. Note that the password is effective only within five-digital, one hundred thousand digits will be discarded. Press key to start modification, press the arrow keys,,,, enter the new password, press key again to save, press key to return to the previous menu. Details are as follows: 2 ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703)

23 9. Communication The 805HP indicator has two ways in communicating to the scale: 9. RS232 Communication The indicator has a standard RS-232 serial output interface to connect to large screen monitors, computers or other peripherals. Its effective connection cable length is 5 meters and beyond this length may lead to a high error rate. To turn on / off serial communication, enter the configuration menu and press until the indicator shows. Press to enter the submenu and select on / off with,. Press to confirm selection. I. Serial communication baud rate Serial communication baud rates 200bps, 2400bps, 4800bps, 9600bps are available. The baud rate is set in the submenu using,. Press to confirm selection. II. Data frame format Data frame format is set in submenu. Press to enter the submenu and use the, to select your desired format. Press to confirm selection. Serial output format can be configured as 8N / 8O / 8E. 8N means start bit, 8 data bits, stop bit, and no parity. 8O means start bit, 8 data bits, stop bit, and odd parity. 8E means start bit, 8 data bits, stop bit, even parity. ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703) 22

24 Indicator outputs data in the form of byte frame. Every byte frame is constituted by eight bytes of data, and all the bytes are ASCII. = D0 D D2 D3 D4 D5 D7 Each frame begins with = (0x3D). Each frame contains seven data bytes, including decimal point. (0x2E). MSB first, and the LSB follows. If there is a negative sign - (0x2D), then it will be Transmitted first. For example, transmit 70.5, that is transmitting = For example, transmit -32.5, that is transmitting = III. Communication mode Two communication modes can be selected in submenu. Press to enter the submenu and use the, to select your desired communication mode. Press to confirm selection. When the parameter is configured to contin, indicator transmits data in the form of one frame after the other. When the parameter is configured to reque, if and only if the indicator receives ASCII character, it will send a data frame. 9.2 Wireless Communication The indicator can operate at 433Mhz and 95Mhz frequencies. The effective distance between the scale and indicator is maximum of 75 meters. If you need to change the indicator or wireless transceiver, or because of radio frequency interference, you can configure the communication parameters to re-obtain high-quality communications in the following steps: 23 ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703)

25 Set up a wireless address: The wireless transceiver has its own independent and fixed communication address with codes The wireless communication works when the address code of the indicator is consistent with the address of the wireless transceiver. Check parameter values of the menu and make any necessary changes to match the address code of the wireless transceiver. Automatic Channel Search: After completing the wireless address set up, execute command. Indicator will automatically search the wireless transceiver channels from -6. If the channel search is successful, the indicator will display PASS. If the channel search fails, the indicator displays FAIL. Check if wireless transceiver power supply is normal, if the communication distance is too far, and if radio frequency interference exists. Manually switch channels: When multiple sets of wireless systems are needed in the same location, wireless systems of the same channel may interfere with each other. To avoid this, you need to manually switch channels. Using different channels to distinguish between different wireless systems will ensure high quality wireless communications. To manually change channels, execute command of the menu. Press, key to choose the designated channel number (-6), and press key to execute the handover command. If the channel matches successfully, the indicator displays PASS. If the channel fails, the indicator displays FAIL. Switching command is repeatable until channel match is successful. Set communication power: To set communication power, execute command of the menu. Press, key to select the power level (-8), press key to perform the set command. When the power settings are successful, the indicator displays PASS. When the power setting fails, the indicator displays FAIL. Switching command can be executed repeatedly until switched successfully. ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703) 24

26 Set wireless signal output on / off: When need to support the use of wireless large screen or other external wireless devices, you can open the wireless signal output. Opening mode: adjust the menu to 0. Calibration and Parameter Settings The indicator supports multi-point (total 2 points) standard value calibration and multi-point (total 2 points) digit input calibration. In actual use the indicator can be calibrated by the A/D count, which was recorded during the standard value calibration. The device calibration accuracy has the same accuracy as it is calibrated by standard value calibration. The following are the requirements in calibration: The scale and indicator shall established a stable communication Test Weights or known weights (recommended at least 20% of the maximum capacity). Make sure Local Gravity is in line with the gravity stored in the indicator, otherwise, change it according to the local gravity value. 0. Standard Value Calibration The weight calibration consists of the following steps: Zero A/D count Weight Calibration Calibrated point A/D count Zero offset value (Zero offset can be re-corrected when using hooks or chains to hang the test weights.) The following describes calibration procedures for Standard Value Calibration: 25 ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703)

27 ) Enter the configuration menu, the indicator shows. Remove all loads. If hooks or chains are used to hang the test weights, load the hooks or chains. 2) Press until the indicator shows. Press to move into zero A/D count. 3) The indicator shows, press to zero calibration. The indicator shows the A/D count for the zero calibration, e.g.. Press again to save the value and go to the next menu. 4) The indicator shows load test weights, press. The indicator shows the test weight value, e.g.. Press,,, to input the test weight value. Press to save the value and go to the next menu. 5) The indicator shows. Press to calibrate span. The A/D count for the span calibration is shown, e.g.. Press again to save the calibration value and go to the next menu. Note: When calibrating with multiple test weights repeat the steps 4 to 5. 6) When the indicator shows, there are 2 options: 6.) If no chains or hooks are used to hang the test weights during calibration, remove the test weight and press the start key to finish the calibration and return to weighing mode. 6.2) If hooks or chains are used during the calibration, remove these and the test weights. With all weight removed, press to re-zero (this function can be used to remove the tare weight deviation if the hooks or chains are used to hang the test weights). The indicator shows the current A/D count, e.g.. Press again to finish the calibration and return to weighing. Suggestion: When calibrating with standard value calibration, record the A/D count of zero and span calibration, so that you may re-calibrate your indicator simply by entering the recorded A/D count of zero and span calibration with the Digit Calibration method. ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703) 26

28 Detailed diagram for standard value calibration: end calibrate input the standard values end calibrate repeat calibrate other values 27 ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703)

29 0.2 Digit Calibration Digit calibration is another method in which you can calibrate the scale system without using the actual test weights. The method requires the A/D count recorded from the previous standard value calibration. The digit calibration consists of the following steps: Zero A/D count Weight Calibration Calibrated point A/D count Zero offset value (Zero offset can be re-corrected when using hooks or chains to hang the test weights.) The following describes calibration procedure for digit calibration methods: ) Enter the configuration menu, the indicator shows 2) Press until the indicator shows. Press to move into zero A/D count. 3) The indicator shows. Press and the indicator will show. Press,,, to input the new zero A/D count. Press again to save and go to the next menu. 4) The indicator shows. Press and the indicator will show Press. Press,,, to input the new test weight value. to save and go to the next menu. 5) The indicator shows. Press and the indicator will show Press. Press,,, to input the new Span A/D count. again to save and finish the digit calibration. ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703) 28

30 Note: When calibrating with multiple test weights repeat the steps 4 to 5. 6) When the indicator shows, there are 2 options: 6.) If no chains or hooks are used during the standard value calibration, press the start key to finish the calibration and return to weighing mode. 6.2) If hooks or chains are used during the standard value calibration, press,,, to input the re-zero A/D count. Press again to save and finish the digit calibration and return to weighing mode. Detailed diagram for digit calibration: input the Zero A/D count input the cor respon ding A/D count end cal ibrate repea t cal ibrate other val ues input the standa rd val ues input the cor respon ding A/D count 29 ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703)

31 . Troubleshooting Guides PROBLEM No display in the indicator POSSIBLE CAUSE Defective battery Defective button/s Power button not properly pressed Replace SOLUTION Requires authorized service Press and hold ON/OFF key for three seconds Digits flash (indicator) Display does not respond to load changes Display weight shows large error Wireless distance shortened Low battery Faulty load cell Out of calibration Scale is not Zeroed before applying weight Requires recalibration Units (kg/lb) wrong selection Wireless indicator s battery is low Adjust the RF Power output in the indicator Replace battery Requires authorized service Re-calibration Press ZERO before applying weight See calibration See operation Replace battery See operation 2. Technical Specifications Features & Specifications 805HP-WL (Wireless Indicator) 805HP (Wired Indicator) Electrical Performance: Link Connection/Interface Non-linearity Zero Temp. Drift Frequency-6 available channels to avoid interference (duplex) ±0.00%F.S. Max ±0nV / Wired with RS-232 compatible interface ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703) 30

32 Max. Capacity Temp. Drift Max. Display Resolution Min. Input Sensitivity Input signal range Load cell Excitation Voltage Power Supply Display: Display Sampling Frequency Display content Units of Measurement Enclosure material IP Rating Ports Functions: Overload protection Functions ±3ppm / Max / 0, μv / e 0mV ~ ±25mV.22Vdc 3 x AA.5V alkaline batteries 6-digit panoramic FSTN LCD with LED back light 4.7 / 6.25 / 8.33 / 0 / 2.5 / 6.7 / 33.2 / 50 / 62 / 23Hz are user-selectable. Display can show a positive or negative number, and decimal point can be selected to any position. kg / lb / t / g / oz / klb / N / kn / are user-selectable units. Measurements units can be enabled independently and switched. The default unit can be selected. RS-232C (optional) ABS IP65 RS-232C (optional) User-selectable overload warning value and alarm value. Overload warning and alarm can be enabled or disabled. Overload alarm peak records can be reviewed. 2 set-points calibration, Zero scale, Tare, Low battery warning, Peak-hold. 3 ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703)

33 Power-down storage Power-saving Functions: Zero Tare In / Tare Out Hold Low Voltage Alarm Battery Supervision Overload Alarm / Record Calibration Digital Calibration Unit Switch Gravity Acceleration Switch Tare set Total / Delete / Clear Total View Total Resolution Switch Auto- Off Set Idle Set Tare Range Zero Range Date can be saved after power-off. Date can also be saved after removing batteries. If inactive for a period of time set by user, the auto power-saving mode will activate. If inactive for a period of time set by user, the auto power-off mode will activate. Yes Yes Yes (with Peak Hold) Yes Yes 2 Alarm Set Point (Lower and Higher)-records overload 2-set-points calibration is required for linearity correction Yes kg, g, t, lb, Klb, N, kn, oz, User s defined unit Yes Yes Yes Yes Yes Yes Yes 00% F.S. 4% F.S. ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703) 32

34 3. Appendices 3. Seven-segment digital display alphanumeric table A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 3.2 Gravitational acceleration in different countries 2 Acceleration Due to Gravity, g in m/s Country City G-Constant Country City Canada Montreal Philippines Manila Ottawa Toronto Vancouver G-Constant Argentina Buenos Aires Mexico Mexico City Australia Sydney Morocco Rabat Austria Vienna Netherlands Amsterdam Belgium Brussels 9.84 New Zealand Wellington Belize Manamah Norway Oslo Bolivia La Paz Panama Panama City Brazil Brasilia Peru Lima Poland Swider Portugal Lisbon Rumania Bucharest ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703)

35 Check Republic Prague 9.84 Saudi Arabia Riyad Chile Santiago Scotland Stockholm China Hong Kong Singapore Singapore Colombia Bogota South Africa Johannesburg Costa Rica San Jose Spain Madrid Cypress Nicosia Switzerland Bern Denmark Copenhagen Taiwan Taipei Ecuador Quito Tunisia Tunis Finland Helsinki Turley Ankara Germany Dusseldorf Uruguay Montevideo Great Britain London USA Anchorage Greece Athens Atlanta Guatemala Guatemala Boston City Hungary Budapest Chicago Indonesia Djakarta Dallas Iraq Baghdad Detroit Japan Mishima Los Angeles Korea Seoul New York Kuwait Kuwait Philadelphia Lebanon Beirut San Francisco Mauritius Port Louis Venezuela Caracas ANYLOAD 805HP Handheld Digital Weighing Indicator User s Manual (V703) 34

36 Anyload Transducer Co. Ltd. Website: Fax: North America Toll Free: -855-ANYLOAD ( )