am PC erstellt pixelio.de

Size: px

Start display at page:

Download "am PC erstellt pixelio.de"

Nathaniel Carpenter
5 years ago
Views:

1 am PC erstellt pixelio.de Glass

2 DESIGN / MARKING RB 42 / RD 42 The design of the visible touch area/display area is defined by the marking on the rear of the glass faceplate. The respective marking area is illuminated from behind by the button/the indicator. Standard font: Agfa Rotis Semi Sans RB 42 Rainbow Button Marking area Ø RB 42 2M Rainbow Button 2M Marking area RD 42 Rainbow Display Marking area 8.102

DESIGN / MARKING RB 42 / RD 42 RB 42 Rainbow Button Marking area 16 11 0.5 3 10 min. 56 12 19.5 19.

When installed in glass with conductive coating, e. g. mirrors, a circumferential frame (0.

3 DESIGN / MARKING RB 42 / RD 42 RB 42 Rainbow Button Marking area min PARTICULAR INSTALLATION CONDITIONS RB 42 Marking area ! When installed in glass with conductive coating, e. g. mirrors, a circumferential frame (0.5 mm at least) must cut the conductive surface. To be done on site only! CUSTOMIZED DESIGN RB 42 Marking area Dr. Müller LOBBY! Customized designs are possible within the pre-defined marking area

4 FACEPLATE MARKING Glass Colour range for glass background RAL 9005 RAL 9006 RAL 9010 (pure white) RAL 7016 (anthracite grey) RAL 9006 (white aluminium) RAL 9005 (jet black) RAL 1001 (beige) RAL 9010 RAL Special hints / Colour tolerances RAL 1001 Rear marking of the glass faceplate, non-illuminated In case of fire do not use the lift highlighted in colours: black, similar to RAL 9005 white, similar to RAL 9010 green, similar to RAL 6018 blue, similar to RAL 5002 red, similar to RAL kg 13 Pers. Baujahr 2011 Fabr.-Nr REVISION b Update /

5 FACEPLATE MARKING Glass Marking with lettering field/luminous field illuminated or non-illuminated film interchangeable example: LF 9924 Marking with multi indicator/lettering field illuminated or non-illuminated film interchangeable example: MA

RB 42 V Rainbow Button 42, V Rear view Rainbow Button RB 42 is a capacitive button for installation behind non-conducting materials like glass, acryl glass, etc.

The luminous colours for quiescent state (permanent illumination) and acknowledgement state (recall light) are different.

8 mm, support 2 mm Connection technology 0.1 mm² AWG 28 2 8.

6 RB 42 V Rainbow Button 42, V Rear view Rainbow Button RB 42 is a capacitive button for installation behind non-conducting materials like glass, acryl glass, etc. Installation behind conducting surfaces (e. g. mirrors, conductive lacquer) is only possible with particular installation (see page.8.103). The luminous colours for quiescent state (permanent illumination) and acknowledgement state (recall light) are different. For both states, the luminous colours and the luminosity are freely adjustable. Fixing welding studs M3 x 16 at support (electrically conductive material) Faceplate thickness glass, acrylic glass max. 8 mm, support 2 mm Connection technology 0.1 mm² AWG mm² (ribbon cable) 4 Supply voltage 12 V 30 V DC, smoothed Power consumption quiescent current (LEDs off) 15 ma Permanent illumination LED RGB SMD U = 12 V 30 V AC/DC luminosity 20 % 40 ma at 12 V, 25 ma at 24 V luminosity 100 % 160 ma at 12 V, 80 ma at 24 V Recall light LED RGB SMD U = 12 V 30 V AC/DC luminosity 20 % 65 ma at 12 V, 40 ma at 24 V luminosity 100 % 180 ma at 12 V, 100 ma at 24 V Switching element relay, 1 potential-free NO-contact switching voltage = max. 50 V AC / 60 V DC switching current = max. 1 A ohmic load switching capacity = max. 37 VA AC / 30 W DC Temperature range -20 C +65 C Additional option In combination with the Power Saver PS 42 it is possible to reduce the luminosity of the RB 42 depending on motion detection or the ambient brightness. Configuration on site by DIP switch or via Config Kit Wiring diagram P I T C H glass/acryl glass support + _ C NO L2 L BR mounting set with pressure spring welding studs M3 x 16 at support Cutout carrier plate ± ± RB/PS Config Kit Config Adapter! Please order fixing accessories separately.

7 RB 42 IX Rainbow Button 42, IX Rainbow Button RB 42 is a capacitive button for installation behind non-conducting materials like glass, acryl glass, etc. Installation behind conducting surfaces (e. g. mirrors, conductive lacquer) is only possible with particular installation (see page.8.103). The luminous colours for quiescent state (permanent illumination) and acknowledgement state (recall light) are different. For both states, the luminous colours and the luminosity are freely adjustable. Fixing welding studs M3 x 16 at support (electrically conductive material) Faceplate thickness glass, acrylic glass max. 8 mm, support 2 mm Connection technology mm2 AWG mm2 (ribbon cable) 4 8 Rear view Supply voltage 12 V 30 V DC, smoothed Power consumption quiescent current (LEDs off) 15 ma Permanent illumination LED RGB SMD U = 12 V 30 V AC/DC luminosity 20 % 40 ma at 12 V, 25 ma at 24 V luminosity 100 % 160 ma at 12 V, 80 ma at 24 V Recall light LED RGB SMD U = 12 V 30 V AC/DC luminosity 20 % 65 ma at 12 V, 40 ma at 24 V luminosity 100 % 180 ma at 12 V, 100 ma at 24 V Switching element relay, 1 potential-free NO-contact switching voltage = max. 50 V AC / 60 V DC switching current = max. 1 A ohmic load switching capacity = max. 37 VA AC / 30 W DC Temperature range -20 C +65 C Additional option In combination with the Power Saver PS 42 it is possible to reduce the luminosity of the RB 42 depending on motion detection or the ambient brightness. Configuration on site by DIP switch or via Config Kit Wiring diagram PITCH glass/acryl glass support + _ C NO L2 L mounting set with pressure spring welding studs M3 x 16 at support Cutout carrier plate ± ± RB/PS Config Kit Config Adapter Please order fixing accessories separately

RB 42 2M XI Rainbow Button 42, 2M XI Rear view Rainbow Button RB 42 2M XI is a capacitive button for installation behind non-conducting materials like glass, acryl glass, etc.

This button comes with an additional potential-free alternating contact and a monitoring circuit. The monitoring circuit automatically checks the function of the button at an interval of 24 hours.

Fixing welding studs M3 x 16 at support (electrically conductive material) Faceplate thickness glass, acrylic glass max. 8 mm, support 2 mm Connection technology 0.1 mm2 AWG 28 2.

AC/DC luminosity 20 % 65 ma at 12 V, 40 ma at 24 V luminosity 100 % 190 ma at 12 V, 100 ma at 24 V Recall light LED RGB SMD U = 12 V 30 V AC/DC luminosity 20 % 100 ma at 12 V, 55 ma at 24 V

1 A ohmic load switching capacity = max. 37 VA AC / 30 W DC relay, 1 potential-free alternating contact switching voltage = max. 30 V AC / 30 V DC switching current = max.

5 VA AC / 60 W DC Temperature range -20 C +65 C Additional option In combination with the Power Saver PS 42 it is possible to reduce the luminosity of the RB 42 depending on motion detection or the

8 RB 42 2M XI Rainbow Button 42, 2M XI Rear view Rainbow Button RB 42 2M XI is a capacitive button for installation behind non-conducting materials like glass, acryl glass, etc. Installation behind conducting surfaces (e. g. mirrors, conductive lacquer) is only possible with particular installation (see page.8.103). This button comes with an additional potential-free alternating contact and a monitoring circuit. The monitoring circuit automatically checks the function of the button at an interval of 24 hours. This ensures increased function safety of the button. Thus, RB 42 2M XI can be employed as emergency call button. Fixing welding studs M3 x 16 at support (electrically conductive material) Faceplate thickness glass, acrylic glass max. 8 mm, support 2 mm Connection technology 0.1 mm2 AWG mm2 (ribbon cable) Supply voltage 12 V 30 V DC, smoothed Power consumption quiescent current (LEDs off) 35 ma at 12 V, 25 ma at 24 V Permanent illumination LED RGB SMD U = 12 V 30 V AC/DC luminosity 20 % 65 ma at 12 V, 40 ma at 24 V luminosity 100 % 190 ma at 12 V, 100 ma at 24 V Recall light LED RGB SMD U = 12 V 30 V AC/DC luminosity 20 % 100 ma at 12 V, 55 ma at 24 V luminosity 100 % 220 ma at 12 V, 110 ma at 24 V Switching element relay, 1 potential-free NO-contact switching voltage = max. 50 V AC / 60 V DC switching current = max. 1 A ohmic load switching capacity = max. 37 VA AC / 30 W DC relay, 1 potential-free alternating contact switching voltage = max. 30 V AC / 30 V DC switching current = max. 2 A ohmic load switching capacity = max VA AC / 60 W DC Temperature range -20 C +65 C Additional option In combination with the Power Saver PS 42 it is possible to reduce the luminosity of the RB 42 depending on motion detection or the ambient brightness. Configuration on site by DIP switch or via Config Kit Wiring diagram PITCH glass/acryl glass support + - C NO NC C NO L2 L mounting set with pressure spring 73.5 welding studs M3 x 16 at support REVISION a Update / Cutout carrier plate / 1 In connection with the DC Decoupler, RB 42 2M XI is employed as emergency call button. The emergency and standard power supply remains galvanically separated when the DC Decoupler is employed RB/PS Config Kit Config Adapter 10 ± ±0.1 Please order fixing accessories separately

For both states, the luminous colours and the luminosity are freely adjustable. Fixing welding studs M3 x 16 at support (electrically conductive material) Faceplate thickness glass, acrylic glass max.

9 RD 42 Rainbow Display 42 Configurable luminous indicator for installation behind glass or acryl glass. The luminous colours for quiescent state (permanent illumination) and acknowledgement state (recall light) are different. For both states, the luminous colours and the luminosity are freely adjustable. Fixing welding studs M3 x 16 at support (electrically conductive material) Faceplate thickness glass, acrylic glass max. 8 mm, support 2 mm Connection technology 0.1 mm² AWG mm² 8 (ribbon cable) Film 4 positive, negative, colour film 41 R LOBBY visible area OVERLOAD Supply voltage 12 V 30 V DC, smoothed Power consumption quiescent current (LEDs off) 15 ma Permanent illumination LED RGB SMD U = 12 V 30 V AC/DC luminosity 20 % 40 ma at 12 V, 25 ma at 24 V luminosity 100 % 160 ma at 12 V, 80 ma at 24 V Temperature range -20 C +65 C Additional option In combination with the Power Saver PS 42 it is possible to reduce the luminosity of the RD 42 depending on motion detection or the ambient brightness. Configuration on site by DIP switch or via Config Kit Rear view Wiring diagram P I T C H glass/acryl glass support L2 L1 mounting set with pressure spring 73.5 welding studs M3 x 16 at support Cutout carrier plate ± ± RB/PS Config Kit Config Adapter! Please order fixing accessories separately

PS 42 GLAS Power Saver 42, glass Sensor module for saving energy PS 42 serves for switching off modules. It comes with two independent outputs and two digital inputs.

8 mm; support 2 mm Connection technology 0.1 mm² AWG 28.

10 PS 42 GLAS Power Saver 42, glass Sensor module for saving energy PS 42 serves for switching off modules. It comes with two independent outputs and two digital inputs. The desired function of the outputs is configurable. Fixing welding studs M3 x 16 at support (electrically conductive material) Faceplate thickness glass, acrylic glass max. 8 mm; support 2 mm Connection technology 0.1 mm² AWG mm² (ribbon cable) Rear view Supply voltage 12 V 30 V DC, smoothed Power consumption quiescent current 10 ma 1 relay on 35 ma 2 relay on 65 ma 2 inputs 12 V 30 V AC/DC 2 outputs 1 potential-free alternating contact switching voltage = max. 50 V AC/60 V DC switching current = max. 1 A ohmic load switching capacity = max. 37 VA AC/30 W DC Temperature range -20 C +65 C Additional option In combination with RB 42/RD 42 further functions are available: - reduction of the luminosity of RB 42/RD 42 - acoustic acknowledgement (RB 42) Configuration on site by DIP switch or via PC programme RB Configurator and Config Kit Accessories installation relay for switching 230 V Wiring diagram P I T C H glass/acryl glass support + _ C Input NO NC C NO NC A B Com mounting set with pressure spring welding studs M3 x 16 at support 73.5 Cutout carrier plate 10 ± ± RB/PS Config Kit Config Adapter

11 PS 42 GLAS Power Saver 42, glass ± ±0.1 Mounting! Please order fixing accessories separately

12 PS 42 LS GLAS Power Saver 42, Light Sensor, glass Sensor module for saving energy: version with light sensor PS 42 LS serves for switching off modules depending on the ambient brightness. It comes with two independent outputs, two digital inputs and a light sensor. The desired function of the outputs is configurable. Fixing welding studs M3 x 16 at support (electrically conductive material) glass, acrylic glass max. 8 mm; support 2 mm Faceplate thickness Connection technology 0.1 mm² AWG mm² (ribbon cable) Rear view Supply voltage 12 V 30 V DC, smoothed Power consumption quiescent current 10 ma 1 relay on 35 ma 2 relay on 65 ma 2 inputs 12 V 30 V AC/DC 2 outputs 1 potential-free alternating contact switching voltage = max. 50 V AC/60 V DC switching current = max. 1 A ohmic load switching capacity = max. 37 VA AC/30 W DC Temperature range -20 C +65 C LS (Light Sensor) min. 200 lx Additional option In combination with RB 42/RD 42 further functions are available: - reduction of the luminosity of RB 42/RD 42 - acoustic acknowledgement (RB 42 Configuration on site by DIP switch or via PC programme RB Configurator and Config Kit Accessories installation relay for switching 230 V Wiring diagram P I T C H glass/acryl glass support + _ C Input NO NC C NO NC A B Com mounting set with pressure spring welding studs M3 x 16 at support 73.5 Cutout carrier plate 10 ± LS Light Sensor ± RB/PS Config Kit Config Adapter

PS 42 LS GLAS Power Saver 42, Light Sensor, glass 73.5 66 ±0.1 21.7 PS 42 LS 43 10 ±0.

13 PS 42 LS GLAS Power Saver 42, Light Sensor, glass ± PS 42 LS ±0.1 marking (glass) faceplate for Light Sensor Mounting! Please order fixing accessories separately

PS 42 EMC LS GLAS Power Saver 42, External Motion Control,

with external motion sensor PS 42 EMC LS serves for switching

Rear view Wiring diagram Input + _ C NO NC C NO NC A B Com

conductive material) glass, acrylic glass max.

DC, smoothed Power consumption quiescent current 40 ma 1 relay

potential-free alternating contact switching voltage = max.

1 A ohmic load switching capacity = max.

option In combination with RB 42/RD 42 further functions are

acoustic acknowledgement (RB 42 Configuration on site by DIP

14 PS 42 EMC LS GLAS Power Saver 42, External Motion Control, Light Sensor, glass Sensor module for saving energy: version with external motion sensor PS 42 EMC LS serves for switching off modules depending on the ambient brightness and the presence of persons. It comes with two independent outputs, two digital inputs, a light sensor and a motion sensor. The desired function of the outputs is configurable. It has a close detection range, i. e. it only detects objects which are right in front of the motion sensor. The detection distance can be adjusted between 20 cm up to approx. 1.5 m. The distance to an opposite surface must be at least 0.5 m. Rear view Wiring diagram Input + _ C NO NC C NO NC A B Com Fixing welding studs M3 x 16 / M3 x 10 at support (electrically conductive material) glass, acrylic glass max. 8 mm; support 2 mm Faceplate thickness Connection technology 0.1 mm² AWG mm² (ribbon cable) Supply voltage 12 V 30 V DC, smoothed Power consumption quiescent current 40 ma 1 relay on 65 ma 2 relay on 95 ma 2 inputs 12 V 30 V AC/DC 2 outputs 1 potential-free alternating contact switching voltage = max. 50 V AC/60 V DC switching current = max. 1 A ohmic load switching capacity = max. 37 VA AC/30 W DC Temperature range -20 C +65 C Additional option In combination with RB 42/RD 42 further functions are available: - reduction of the luminosity of RB 42/RD 42 - acoustic acknowledgement (RB 42 Configuration on site by DIP switch or via PC programme RB Configurator and Config Kit Accessories installation relay for switching 230 V P I T C H glass/acryl glass 2 support 24 mounting set with pressure spring ±0.1 welding studs M3x16 at support Cutout carrier plate ± ± LS Light Sensor 43 welding studs M3x10 at support EMC External Motion Control Ø RB/PS Config Kit Config Adapter 37 ±

7 marking (glass) faceplate for LS and EMC PS 42 LS 69.

1 EMC 37 24 Mounting Other EMC applications PS 42 with

a call signal. No manual operation necessary (e. g.

15 PS 42 EMC LS GLAS Power Saver 42, External Motion Control, Light Sensor, glass ± marking (glass) faceplate for LS and EMC PS 42 LS ±0.1 EMC Mounting Other EMC applications PS 42 with EMC can be employed as proximity switch for activating a call signal. No manual operation necessary (e. g. in hospitals, food industry, ). Please order fixing accessories separately. Rainer Sturm pixelio.de 8.115

ACCESSORIES DC Decoupler Characteristics

upstream the Rainbow Button type RB 42 2M XI.

thus runs via the standard power supply.

button will be fed via the emergency power supply.

galvanically separated when the DC Decoupler is

0 mm2 Polarity common anode or common cathode

= 12 V 30 V DC smoothed U OUT = 12 V Current

20 ma (without RB 42 2M XI) Power consumption max.

16 ACCESSORIES DC Decoupler Characteristics Description The DC Decoupler is connected upstream the Rainbow Button type RB 42 2M XI. In normal operation, the emergency call button thus runs via the standard power supply. In case of a power failure the emergency call button will be fed via the emergency power supply. The emergency and standard power supply remains galvanically separated when the DC Decoupler is employed. Connection technology 0.1 mm mm2 Polarity common anode or common cathode Supply voltage U IN = 12 V 30 V DC smoothed U NOT = 12 V 30 V DC smoothed U OUT = 12 V Current consumption approx. 20 ma (without RB 42 2M XI) Power consumption max. 10 W Output current 20 ma 420 ma Temperature range 0 C + 65 C Top view REVISION a Update / /

17 ACCESSORIES DC Decoupler Connection DC Decoupler Rainbow Button RB 42 2M XI U IN NOT C E U OUT operating current + GND + - emergency current REVISION a Update / / 2

ACCESSORIES Installation Relay Characteristics Description Fixing Connection technology relay for switching higher loads, e. g. lift car illumination installation on car roof 5.

18 ACCESSORIES Installation Relay Characteristics Description Fixing Connection technology relay for switching higher loads, e. g. lift car illumination installation on car roof mm2 Control voltage 8 V 230 V AC / DC Nominal switching current 10 A / 250 V AC Bulb and halogen lamp load 230 V, 2000 W Fluorescent lamps with conventional starter in duo arrangement or uncompensated 1000 VA Fluorescent lamps with conventional starter compensated in parallel or with electronic starter 500 VA Quiescent current - Wiring diagram A1 -A

19 SOFTWARE GUIDE RB/PS Config Kit XP/Win7/Win8 Characteristics Description System requirements Software for configuration of RB 42 V/IX, RB 42 2M XI, RD 42, PS 42 MS Windows XP SP2 MS Windows 7 MS Windows 8, not MS Windows RT MS NET Framework MB RAM resolution at least 1024 x 768 pixels DVD drive Config-Adapter User interface! DMD-PC-Interface + Config-Adapter = RB/PS Config Kit software plug-in mains adapter 12 V 0.5 A Update Software Guide / DMD-PC-Interface REVISION a Config-Adapter USB cable 8.117

ENERGY SAVING Power Saver 42 ENERGY SAVING Example Solution Function commercial building with ten floors, thereof two parking levels 11 x RB

levels 1 x PS 42 EMC LS in the car fixture 1 x installation relay on the car roof The car fixture and the lift car illumination switch on when

After an adjustable time they will switch off again.

OG parking position PS 42 EMC LS 9 th floor parking position 3. OG 2. OG PS 42 EMC LS 1.

20 ENERGY SAVING Power Saver 42 ENERGY SAVING Example Solution Function commercial building with ten floors, thereof two parking levels 11 x RB 42 1 x RB 42 2M XI 1 x DVM 70 (voice announcement device) 1 x TFT 800 (display) lift car illumination 100 W 2 x PS 42 EMC LS at the parking levels 1 x PS 42 EMC LS in the car fixture 1 x installation relay on the car roof The car fixture and the lift car illumination switch on when a person approaches the lift at the parking levels. They will also switch on when the lift door opens or closes. After an adjustable time they will switch off again. Energy saving 890 kwh/a Amortisation period < 2 years without PS 42 with PS 42 LOW ENERGY PS 42 EMC LS +24 V GND 9. OG parking position PS 42 EMC LS 9 th floor parking position 3. OG 2. OG PS 42 EMC LS 1. OG PS 42 EMC LS PS 42 EMC LS PS 42 EMC LS ground floor parking position lift car lift car illumination EG parking position 230 V +24 V + 24 V switched e. g. installation relay ER V AC/DC GND RB 42 DVM DMD car fixture 24 V door open from door drive other on car roof in the car fixture in the landing fixture or indicator fixture 8.118

TFT 3.2" H EN EN Thin Film Transistor Display 3.2", horizontal II. 1.45/5 IV /1. Characteristics

TFT 3.2 H EN EN Thin Film Transistor Display 3.2, horizontal II. 1.45/5 IV /1. Characteristics Displays TFT 3.2" H Thin Film Transistor Display 3.2", horizontal Characteristics TFT-Display (thin-film-transistor) with high graphical resolution Mounting horizontal Faceplate thickness 2 mm / 3 mm Fixing