CORRIGENDUM 2 DATED

Transcription

1 CORRIGENDUM 2 DATED Our RFQ : PN485C014 DTD 30/03/2015 CORRIGENDUM 2 FOR SUPPLY, INSTALLATION INTEGRATIO N AND MAINTENANCE OF SERVERS, STORAGE, BACKUP, NETWORK, VIRTUALISATION AND OS SPECIFICATION REVISED NEW SPEC FOR ALL ITEMS ATTACHED BELOW THE DUE DATE FOR SUBMISSION OF QUOTE REMAIN UNCHANGED ( )

2 ITI LIMITED, KANJIKODE WEST, PALAKKAD, KERALA Revised Technical specifications SLNO 1 ITEM_CODE Server Model and Make Chassis CPU CPU L3 CACHE Memory Motherboard Server Hypervisor (HP/IBM/DELL) Description 2 U Rack Mountable Two numbers of Twelve core Core Intel Xeon E5-2670v3 (2.3GHz/12- core/30mb/120w) Processor or better 30MB (1 x 30 MB) L3 cache Intel C610 Series Chipset or equivalent /higher Memory Memory Protection HDD Bays Optical drive Bay Hard disk drive RAID Controller Networking features Storage HBA Interfaces Bus Slots Power Supply Fans Graphics 64 GB DDR 4 RAM ( 8 x 8GB DDR MHz DIMMs ) Registered Memory scalable to 384GB, Memory should be genuine OEM memory Advanced ECC with multi-bit error protection and memory online spare mode or equivalent 8 SFF HDD Bays minimum expandable Up to 24+2 SFF HDD/SSD. The sever should have a feature to alert impending failures and should have a mechanism to identify the faulty item. DVD-ROM or DVD-RW 3 Nos x 300GB HDD SFF 15K RPM 12G SAS drives PCIe 3.0 based 12Gb/s SAS Raid Controller with RAID 0/1/1+0/5/50/6/60/ with 2GB battery backed write cache (onboard or in a PCI Express slot) Server should support networking cards with below features: 2 x 1Gb 4-port network adaptor supporting advanced features such as Large Send offload capability, TCP checksum and segmentation, VLAN tagging, MSI-X, Jumbo frames, IEEE 1588, and virtualization features such as VMware NetQueue and Microsoft VMQ. 2 Nos x 8Gb Single Port PCI-e FC HBA Serial - 1 USB (mix up of USB 3.0 and USB 2.0 support) Minimum 4 with : 1 front, 2 rear, 1 internal (secure) Six PCI-Express 3.0 slots, mix up of x16 and x8 slots Redundant 800/750 Watt platinum Power Supplies Redundant hot-plug system fans Integrated video card with 16MB of Video RAM

3 Industry Standard Compliance ACPI 2.0b Compliant PCIe 3.0 Compliant PXE Support WOL Support Microsoft Logo certifications USB 3.0 Support USB 2.0 Support Energy Star UEFI (Unified Extensible Firmware Interface Forum) Embedded system management Security Operating Systems and Virtualization Software Support Secure encryption Warranty Provisioning Should support monitoring ongoing management, service alerting, reporting and remote management with embedded Gigabit out of band management port Server should support configuring and booting securely with industry standard unified extensible firmware. The server should support predictive failure alert for critical components and should work with system management software to generate alerts Server should be IPMI complaint Power-on password Serial interface control Administrator's password UEFI Should support user accounts on out of band management port and SSL encryption Should also supports directory services integration TPM 1.2 Microsoft Windows Server Red Hat Enterprise Linux (RHEL) SUSE Linux Enterprise Server (SLES) VMware Citrix XenServer or Microsoft HyperV System should support Encryption of the data on both the internal storage and cache module of the array controllers using encryption keys. Should support local key management for single server and remote key management for central management for enterprise-wide data encryption deployment. Server Warranty includes 3-Year Parts, 3-Year Labour, 3-Year Onsite support with next business day response. Essential tools, drivers, agents to setup, deploy and maintain the server should be supplied with the server. There should be a built -in Update manager that can help to update firmware of system.

4 1. System remote management should support browser based graphical remote console along with Virtual Power button, remote boot using USB/CD/DVD Drive. It should be capable of offering upgrade of software and patches from a remote client using Media/image/folder; It should support server power capping and historical reporting and should have support for multifactor authentication. 2. Server should have dedicated 1Gbps remote management port. 3. Server should support agentless management using the out-of-band remote management port. 4. The server should support monitoring the server hardware and system configuration. It should assist in diagnosing problems and should help to identify the failed component when system failure occurs. Remote Management 5. Remote console allowing users during pre-os and OS runtime operation,. Should provide support for AES and DES encryption or equivalent. 6. The server should support power control, virtual media features. Server Management The Systems Management software should provide Role-based security Should help provide proactive notification of actual or impending component failure alerts on critical components like CPU, Memory and HDD. Should support automatic event handling that allows configuring policies to notify failures via , or SMS gateway or automatic execution of scripts. Should provide an online portal that can be accessible from anywhere. The portal should provide one stop, online access to the product, support information and provide information to track warranties, support contracts and status. The Portal should also provide a Personalised dashboard to monitor device heath, hardware events, and contract and warranty status. Should provide a visual status of individual devices and device groups. The Portal should be accessible on premise (at customer location - console based) or off premise (using internet). OR the vendor should have a toll free number to check the warranty status, track support contracts and status. Should be able to perform comprehensive system data collection and enable users to quickly produce detailed inventory reports for managed devices. Should support the reports to be saved in HTML, CSV or XML format. Should help to update software / firmware components The Server Management Software should be of the same brand as of the server supplier. Infra Platform /Infra Software to support a variety of different hypervisors, such as VMware, Microsoft Hyper-V, and Red Hat KVM. Management software should support integration with popular virtualization platform management software like vcenter, SCVMM and RedHat RHEV

5 SLNO 2 ITEM_CODE Server Management (HP/IBM/Dell make) Server Model and Make Item Description Chassis CPU CPU L3 CACHE Memory Motherboard Memory Memory Protection HDD Bays Optical drive Bay Hard disk drive 2 U Rack Mountable One number of Six core Intel Xeon E5-2609v3 (1.9GHz/6-core/15MB/85W) or better Processor 15MB (1 x 15 MB) L3 cache Intel C610 Series Chipset or equivalent / higher 16 GB DDR 4 RAM ( 2 x 8GB DDR MHz DIMMs ) Registered Memory scalable to at least upto 384GB, Memory Should be genuine OEM memory Advanced ECC with multi-bit error protection and memory online spare mode or equivalent 8 SFF HDD Bays minimum expandable Up to 24+2 SFF HDD/SSD. The server should have a feature to alert impending failures and should have a mechanism to identify the faulty item DVD-ROM or DVD-RW 3 Nos x 300GB HDD SFF 15K RPM 12G SAS drives RAID Controller PCIe 3.0 based 12Gb/s SAS Raid Controller with RAID 0/1/1+0/5/50/6/60/ RAID with 2GB battery backed write cache (onboard or in a PCI Express slot) Networking features Storage HBA Interfaces Bus Slots Power Supply Fans Graphics Server should support networking cards with below features:1 x 1Gb 4-port network adaptor supporting advanced features such as Large Send offload capability, TCP checksum and segmentation, VLAN tagging, MSI-X, Jumbo frames, IEEE 1588, and virtualization features such as VMware NetQueue and Microsoft VMQ. 2 Nos x 8Gb Single Port PCI-e FC HBA Serial - 1 USB (mix up of USB 3.0 and USB 2.0 support) Minimum 4 with : 1 front, 2 rear, 1 internal (secure) Six PCI-Express 3.0 slots, Mix up of x16 and x8 slots Redundant 500/495 Watt platinum Power Supplies Redundant hot-plug system fans Integrate video card with 16MB of Video RAM Industry Standard Compliance ACPI 2.0b Compliant PCIe 3.0 Compliant PXE Support WOL Support Microsoft Logo certifications USB 3.0 Support USB 2.0 Support Energy Star UEFI (Unified Extensible Firmware Interface Forum)

6 Embedded system management Should support monitoring ongoing management, service alerting, reporting and remote management with embedded Gigabit out of band management port Server should support configuring and booting securely with industry standard unified extensible firmware. The server should support predictive failure alert for critical components and should work with system management software to generate alerts Server should be IPMI complaint Security Operating Systems and Virtualization Software Support Secure encryption Warranty Provisioning Remote Management Power-on password Serial interface control Administrator's password UEFI Should support user accounts on out of band management port and SSL encryption Should also supports directory services integration TPM 1.2 Microsoft Windows Server Red Hat Enterprise Linux (RHEL) SUSE Linux Enterprise Server (SLES) VMware Citrix XenServer or Microsoft Hyper V System should support Encryption of the data on both the internal storage and cache module of the array controllers using encryption keys. Should support local key management for single server and remote key management for central management for enterprise-wide data encryption deployment. Server Warranty includes 3-Year Parts, 3-Year Labour, 3-Year Onsite support with next business day response. Essential tools, drivers, agents to setup, deploy and maintain the server should be embedded inside the server. There should be a built -in Update manager that can update firmware of system by connecting online System remote management should support browser based graphical remote console along with Virtual Power button, remote boot using USB/CD/DVD Drive. It should be capable of offering upgrade of software and patches from a remote client using Media/image/folder; It should support server power capping and historical reporting and should have support for multifactor authentication. 2. Server should have dedicated 1Gbps remote management port. 3. Server should support agentless management using the out-of-band remote management port. 4. The server should support monitoring the server hardware and system configuration. It should assist in diagnosing problems and should help to identify the failed component when system failure occurs. 5. Remote console allowing users during pre-os and OS runtime operation,. Should provide support for AES and DES encryption or equivalent. 6. The server should support power control, virtual media features. Server Management The Systems Management software should provide Role-based security

7 Should help provide proactive notification of actual or impending component failure alerts on critical components like CPU, Memory and HDD. Should support automatic event handling that allows configuring policies to notify failures via , or SMS gateway or automatic execution of scripts. Should provide an online portal that can be accessible from anywhere. The portal should provide one stop, online access to the product, support information and provide information to track warranties, support contracts and status. The Portal should also provide a Personalised dashboard to monitor device heath, hardware events, and contract and warranty status. Should provide a visual status of individual devices and device groups. The Portal should be accessible on premise (at customer location - console based) or off premise (using internet) or the vendor should have a toll free number to check the warranty status, track support contracts and status. Should be able to perform comprehensive system data collection and enable users to quickly produce detailed inventory reports for managed devices. Should support the reports to be saved in HTML, CSV or XML format. Should help update of system software/firmware components. The Server Management Software should be of the same brand as of the server supplier. Infra Platform /Infra Software to support a variety of different hypervisors, such as VMware, Microsoft Hyper-V, and Red Hat KVM, Solution available to Deploy a fast and easy installation via software appliance delivery mode. With its own OS and Database to provide infra and lifecycle management Management software should support integration with popular virtualization platform management software like vcenter, SCVMM and RedHat RHEV

8 SLNO 3 ITEM_CODE Server Backup (HP/IBM/Dell Make) Server Model and Make Description of Chassis CPU CPU L3 CACHE Memory Motherboard 2 U Rack Mountable One number of Six core Intel Xeon E5-2609v3 (1.9GHz/6-core/15MB/85W) or better Processor 15MB (1 x 15 MB) L3 cache Intel C610 Series Chipset or equivalent / higher Memory Memory Protection HDD Bays Optical drive Bay Hard disk drive 16 GB DDR 4 RAM ( 2 x 8GB DDR MHz DIMMs ) Registered Memory scalable to at least upto 384GB, Memory Should be genuine OEM memory Advanced ECC with multi-bit error protection and memory online spare mode or equivalent 8 SFF HDD Bays minimum expandable Up to 24+2 SFF HDD/SSD. The server should have a feature to alert impending failures and should have mechanism to identify faulty component. DVD-ROM or DVD-RW 3 Nos x 300GB HDD SFF 15K RPM 12G SAS drives RAID Controller PCIe 3.0 based 12Gb/s SAS Raid Controller with RAID 0/1/1+0/5/50/6/60/ RAID with 2GB battery backed write cache (onboard or in a PCI Express slot) Networking features Storage HBA Server should support networking cards with below features: 1 x 1Gb 4-port network adaptor supporting advanced features such as Large Send offload capability, TCP checksum and segmentation, VLAN tagging, MSI-X, Jumbo frames, IEEE 1588, and virtualization features such as VMware NetQueue and Microsoft VMQ. 2 x 12Gb 2-ports Ext Smart Host Bus Adapter with following specs 12Gb/s SAS (bandwidth per physical link) 96Gb/s total available bandwidth (8 physical links x 12Gb/s) PCIe 3.0 host interface x8 (8GT/s bandwidth per lane)12gb 2-ports Ext Smart Host Bus Adapter OR Equivalent or Higher Interfaces Bus Slots Power Supply Fans Graphics USB (mix up of USB 3.0 and USB 2.0 support) Minimum 4 with : 1 front, 2 rear, 1 internal (secure) Six PCI-Express 3.0 slots, Mix up of x16 and x8 slots Redundant 500/495 Watt platinum Power Supplies Redundant hot-plug system fans Integrated video card standard with 16MB of Video RAM

9 Industry Standard Compliance Embedded system management ACPI 2.0b Compliant PCIe 3.0 Compliant PXE Support WOL Support Microsoft Logo certifications USB 3.0 Support USB 2.0 Support Energy Star UEFI (Unified Extensible Firmware Interface Forum) Should support monitoring ongoing management, service alerting, reporting and remote management with embedded Gigabit out of band management port Server should support configuring and booting securely with industry standard unified extensible firmware. The server should support predictive failure alert for critical components and should work with system management software to generate alerts Server should be IPMI complaint Security Operating Systems and Virtualization Software Support Secure encryption Warranty Provisioning Power-on password Serial interface control Administrator's password UEFI Should support user accounts on out of band management port and SSL encryption Should also supports directory services integration TPM 1.2 Microsoft Windows Server Red Hat Enterprise Linux (RHEL) SUSE Linux Enterprise Server (SLES) VMware Citrix XenServer or Microsoft HyperV System should support Encryption of the data on both the internal storage and cache module of the array controllers using encryption keys. Should support local key management for single server and remote key management for central management for enterprise-wide data encryption deployment. Server Warranty includes 3-Year Parts, 3-Year Labour, 3-Year Onsite support with next business day response. Essential tools, drivers, agents to setup, deploy and maintain the server should be embedded inside the server. There should be a built -in Update manager that can update firmware of system by connecting online.

10 1 System remote management should support browser based graphical remote console along with Virtual Power button, remote boot using USB/CD/DVD Drive. It should be capable of offering upgrade of software and patches from a remote client using Media/image/folder; It should support server power capping and historical reporting and should have support for multifactor authentication. 2. Server should have dedicated 1Gbps remote management port. 3. Server should support agentless management using the out-of-band remote management port. 4. The server should support monitoring the server hardware and system configuration. It should assist in diagnosing problems and should help to identify the failed component when system failure occurs. Remote Management 5. Remote console allowing users during pre-os and OS runtime operation,. Should provide support for AES and DES encryption or equivalent. 6. The server should support power control, virtual media features. Server Management The Systems Management software should provide Role-based security Should help provide proactive notification of actual or impending component failure alerts on critical components like CPU, Memory and HDD. Should support automatic event handling that allows configuring policies to notify failures via , pager, or SMS gateway or automatic execution of scripts. Should provide an online portal that can be accessible from anywhere. The portal should provide one stop, online access to the product, support information and provide information to track warranties, support contracts and status. The Portal should also provide a Personalised dashboard to monitor device heath, hardware events, and contract and warranty status. Should provide a visual status of individual devices and device groups. The Portal should be accessible on premise (at customer location - console based) or off premise (using internet).or the vendor should have a toll free number to check the warranty status, track support contracts and status. Should be able to perform comprehensive system data collection and enable users to quickly produce detailed inventory reports for managed devices. Should support the reports to be saved in HTML, CSV or XML format. Should help to update of system software/firmware components. The Server Management Software should be of the same brand as of the server supplier. Infra Platform /Infra Software to support a variety of different hypervisors, such as VMware, Microsoft Hyper-V and Red Hat KVM. Management software should support integration with popular virtualization platform management software like vcenter, SCVMM and RedHat RHEV

11 SLNO 4 ITEM_CODE Storage Main FC22TB (HP/IBM/DELL/EMC/Netapps make) Model and Make Description of 1 Fibre Channel external storage system with Two Fibre active active RAID controllers and 22TB of usable storage capacity after RAID and Hotspare 2 Storage should be supplied with 1.2TB 6GB SAS 10K RPM SFF HDDs Storage system should be supplied with Two Fibre active active RAID controllers having a minimum of 4GB Cache per controller after removing the overhead of operating system. Storage system should be supplied with redundant controllers, fans, power supplies, and I/O modules Offered Storage system shall be supplied with minimum of Quad ( 4 Nos) 8Gbps FC ports per controller 6 7 Offered storage shall have flexibility to use all above ports (FC/ISCSI) Offered Storage subsystem back-end shall be powered by latest generation SAS II running with 600MB/sec (6Gbps) speed 8 Cache can be backed up 9 Should support hot plug expansion and replacement of hard drives, redundant controllers, fans and power supplies 10 Offered storage shall support Raid 0, Raid 1, Raid 1+0, Raid 3, Raid 5 and Raid 6 11 Offered storage subsystem shall support minimum 512 Logical units with LUN size support more than 40TB at storage controller level. 12 Storage system shall also support at least 300/600/900/1200GB Enterprise SAS Drives, 200/400/800GB SSD and 1TB/ 2TB / 3TB / 4TB SAS MDL or NL SAS drives 13 Offered storage array shall also support SAS and SAS MDL or NL SAS drives 14 Storage Array shall support at-least 180 Enterprise SAS drives 15 Storage system shall be scalable to at-least 160TB by using 900GB disk drives For effective power saving, Storage Subsystem shall have Disk spin down feature 16 so that drives shall not consume power when not in use or should have a mechanism for effective power saving Offered Storage subsystem shall have controller based Snapshot and Clone 17 support. Storage subsystem shall be supplied with the license for at-least 64 snapshots and clone license from the day 1 18 Offered Storage system shall support minimum of 512 numbers of snapshots 19 Storage subsystem shall have fully redundant power supply and fans 20 Storage Array should have the capability of configuring hot swap disks and Global Spare disks as well as dedicated spare disk to raid sets 21 Offered storage array shall have in-built performance monitoring engine 22 Offered storage subsystem shall support disaster recovery features like replication to DR location 23 Should support Windows server 2008 / 2012, Linux, VMware, HP-UX etc 24 The Supplied storage should be with 3 years Onsite Comprehensive Warranty form OEM

12 SLNO 5 ITEM_CODE SAS external storage system 12 TB (HP/IBM/DELL/EMC/Netapps make) Model and Make Description of 1 SAS external storage system with Two Active Active RAID controllers and 12TB of usable storage capacity after RAID and Hot spare 2 Storage should be supplied with 16 Nos 1TB 6Gbps 7.2K RPM SFF SAS HDDs Storage system should be supplied with Two active active RAID controllers having a minimum of 4GB Cache per controller after removing the overhead of operating system. Storage system should be supplied with redundant controllers, fans, power supplies, and I/O modules Offered Storage system shall be supplied with minimum Four 6Gb/12Gb SAS host connectivity ports per controller Offered Storage subsystem back-end shall be powered by latest generation SAS II running with 600MB/sec (6Gbps) speed Cache can be backed up 8 Should support hot plug expansion and replacement of hard drives, redundant controllers, fans and power supplies 9 Offered storage shall support Raid 0, Raid 1, Raid 1+0, Raid 3, Raid 5 and Raid 6 10 Offered storage subsystem shall support minimum 512 Logical units with LUN size support more than 40TB at storage controller level. 11 Storage system shall also support at least 300/600/900/1200GB Enterprise SAS Drives, 200/400/800GB SSD and 1TB/ 2TB / 3TB / 4TB SAS MDL or NL SAL drives 12 Offered storage array shall also support SAS and SAS MDL or NL SAS drives 13 Storage Array shall support at-least 180 Enterprise SAS drives 14 Storage system shall be scalable to at-least 160TB by using 900GB disk drives For effective power saving, Storage Subsystem shall have Disk spin down feature 15 so that drives shall not consume power when not in use or should have an effective mechanism for power saving Offered Storage subsystem shall have controller based Snapshot and Clone 16 support. Storage subsystem shall be supplied with the license for at-least 64 snapshots and clone license from the day 1 17 Offered Storage system shall support minimum of 512 numbers of snapshots 18 Storage subsystem shall have fully redundant power supply and fans 19 Storage Array should have the capability of configuring hot swap disks and Global Spare disks as well as dedicated spare disk to raid sets 20 Offered storage array shall have in-built performance monitoring engine 21 Offered storage subsystem shall support disaster recovery features like replication to DR location 22 Should support Windows server 2008 / 2012, Linux, VMware, HP-UX etc 23 The Supplied storage should be with 3 years Onsite Comprehensive Warranty form OEM

13 SLNO 6 ITEM_CODE Tape Drive Ultrium 6 Model and Make Description of 1 External Rack mountable Tape drive capable of storing up to 6.25TB of compressed storage on a single cartridge 2 The offered Tape drive should support data transfer rate up to 400MB/sec 3 4 The offered Tape drive should be compatible with leading servers, operating systems, and backup applications Should support Microsoft Windows, HP-UX, Tru64, Red Hat Linux, SUSE Linux, IBM-AIX, Sun Solaris and other operating systems Should be supplied with Diagnostics tools from OEM which help to 5 6 1, Verifies installation of the drive 2, Test/verify the health of the drive and media 3, Provides detailed device information 4, Support for finding and upgrading firmware 5, Performance optimization and recommendations All necessary cables required for connection to servers are provided with tape drive. 7 Should support leading backup software like HP Data Protector, HP Data Protector, CA ARCserve Backup, EMC NetWorker, EMC Retrospect, IBM Tivoli Storage Manager, Symantec NetBackup, and Symantec Backup Exec etc 8 9 SLNO 7 ITEM_CODE Network Switch Model and Make Tape drive should supplied with One number of cleaning cartridge and Seven numbers of Data cartridges The Supplied storage should be with 3 years Onsite Comprehensive Warranty form OEM 1 Architecture 1.1 Shall be 1RU, 19" Rack Mountable RJ-45 autosensing 10/100/1000 ports with 4 SFP+ fixed 1000/10000 SFP+ ports RJ-45 serial console port 1.4 Must have 1 GB SDRAM, 128 MB flash; packet buffer size: 1.5 MB 1.5 Shall have switching capacity of 128Gbps 1.6 Shall have up to 96 million pps switching throughput with 16K MAC support 2 Resiliency 2.1 support for Separate data and control paths: increases security and performance 2.2 Must support 9 Switch Stacking with SDN-ready with support for OpenFlow support for virtual resilient switching fabrics, where two or more switches perform as a single Layer 2 switch and Layer 3 router 3 Layer 2 Features 3.1 Shall support IEEE 802.1Q with 4,094 simultaneous VLAN IDs

14 Shall support GARP VLAN Registration Protocol or equivalent feature to allow automatic learning and dynamic assignment of VLANs Shall have the capability to monitor link connectivity and shut down ports at both ends if uni-directional traffic is detected, preventing loops 3.4 support for SNMP V1,2,3 3.5 Multicast Listener Discovery (MLD) snooping 3.6 IEEE 802.1AB Link Layer Discovery Protocol (LLDP) 5 Layer 3 Features (any additional licenses required shall be included) 5.1 Must support Static and RIP with 512 entries (IPv4), 256 entries (IPv6) 5.2 <5us of latency support on 1Gig Ports User Datagram Protocol (UDP) helper function to allow UDP broadcasts to be directed 5.3 across router interfaces 6 QoS and Security Features support for Broadcast control: allows limitation of broadcast traffic rate to cut down on 6.1 unwanted network broadcast traffic support for Powerful QoS feature: supports the following congestion actions: strict 6.2 priority (SP) queuing, SDWRR, and SP+SDWRR support for Advanced classifier-based QoS: classifies traffic using multiple match criteria 6.3 based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a per-port basis 7 Management Features 7.1 Configuration through the CLI, console, Telnet, SSH and Web Management 7.2 SNMPv1, v2, and v3 and Remote monitoring (RMON) support 7.3 support for IEEE 802.3x Flow Control 7.4 Management security through multiple privilege levels 7.5 FTP, TFTP, and Secure FTP support 7.6 RADIUS/TACACS+ for switch security access administration 7.7 Shall have Ethernet OAM (IEEE 802.3ah) management capability 8 Environmental Features 8.1 Shall provide support for RoHS and WEEE regulations 8.2 Shall have features to improve energy efficiency like variable-speed fans, shutoff unused ports etc 8.3 Operating temperature of 0 C to 45 C 8.4 Safety and Emission standards including UL ; IEC ; VCCI Class A; EN Class A 9 Warranty and Support The below Warranty shall be offered directly from the switch OEM. 9.1 Lifetime warranty with advance replacement and next-business-day delivery SLNO 8 ITEM_CODE LIC VMWare/Vsphere 1 VMWare vsphere Essentials Plus Kit with 6 processor Lic with 3 Year Support / 6 CPU Licences of vsphere Essentials Plus (for 3 servers up to 2 processors each) and 1 licence for vcentre server essentials

15 SLNO 9 ITEM_CODE LIC RHEL 1 Redhat Enterprise Linux Server, Standard (1-2 Sockets )(Upto 1 guest ), 1 Year,Support (4 Numbers) SLNO 10 ITEM_CODE LIC WINDOWS SERVER Windows Server 2102 R2 Std SNGL OLP NL ( 5 Licenses) SLNO 11 ITEM_CODE LIC WINDOWS SERVER CAL Windows Server CAL 2012 SNGL OLP nl User CAL (10 Numbers ) SLNO 12 ITEM_CODE LIC MS SQL SERVER SQL Server Standard 2014 SNGL OLP NL (1 Number) SLNO 13 ITEM_CODE LIC MS SQL CAL SQL CAL 2014 SNGL OLPNL User CAL (5 Numbers) SLNO 14 ITEM_CODE LIC MS VS Microsoft Visual Studio Professional 2013 License (5 Numbers) SLNO 15 ITEM_CODE LIC MS OFFICE MS Office Standard 2013 SNGL OLP NL 5 Numbers)

16 SLNO 16 ITEM_CODE EMC NETWORKER 1 EMC Networker Backup and restore from server and storage,to tape and storage,both windows and RHEL,MS SQL Server RDBMS Backup SLNO 17 ITEM_CODE Trend Micro Neat Suite 1 Trend Micro neat suite licence 10 Numbers for three years with Three year support for patches and updates SLNO 18 ITEM_CODE 40 Inch LCD Monitor 1 40 Inch LCD Monitor with USB, HDMI.