REVISION HISTORY. REV DESCRIPTION SUB DATE APPROVED D Updated to new format, Added Desktop Insert Installed sorec 02/14/2014 QA

Transcription

1 REVISION HISTORY REV DESCRIPTION SUB DATE APPROVED D Updated to new format, Added Desktop Insert Installed sorec 02/14/2014 QA In Addition to GlobTek Inc.'s renewed ISO9001: Quality Management System Certification, GlobTek Inc. is now certified to: ISO13485: Medical Devices Quality Management System Certification ISO14001: Environmental Management System Certification ISO Certificates are available On-Line at Customer Approval of Specification: Please approve, sign and send back to GlobTek so we can complete order processing. A delay in receipt of this form will delay delivery schedule. Company Name: Customer P/N: Quote Number: Date: Authorized Representative Name: Authorized Representative Signature: Footnote: GlobTek Inc. will not be liable for the safety and performance of these power supplies if unauthorized access and repair occurs. End user should consult applicable UL, CSA or EN standards for proper installation instruction. Limitation of Use: GlobTek product are not authorized for use as mission critical components in life support hazardous environment, nuclear or aircraft applications without prior written approval from the CEO of GlobTek Inc. Contents of this document are subject to change without prior notice. GTM T2, 30W, 12V@2.5A, Wall Plug-in/Desktop, Regulated Switchmode AC-DC Page 1 of 11

2 POWER SUPPLY INFORMATION TYPE: Wall Plug-in/Desktop TECHNOLOGY: Regulated Switchmode AC-DC CASE COLOR: GlobTek Black NAMEPLATE RATED INPUT: V~, Hz, 1.5A INPUT CONFIG: IEC 60320/C8 w/ Wall Blades Option WATTS: 30.0 VOLTS OUT: 12 CURRENT OUT (Amps): 2.5 BLADE/CORD INCLUDED: R-DI: R-Series Desktop Insert BLADE/CORD INSTALLED: R-DI: R-Series Desktop Insert EFFICIENCY LEVEL: V OUTPUT CONFIGURATION CONNECTOR PIN OUT: LABEL SPECS: PACK SPEC: NOTES / DEVIATIONS: 1830 mm, 18/1C + Shield Cond, UL 1185, Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal, Ferrite: Core Size: 14.2*28.5*8.2, GlobTek Black, GT Cord # C0750 Center Positive (+V) Standard GT,L-1186 Desktop/WPI with Desktop Insert DESKTOP INSERT INSTALLED DIMENSIONS ARE IN MM UNLESS SPECIFIED OTHERWISE. ELECTRICAL SPECIFICATIONS A) ELECTRICAL SPECIFICATIONS: 1. Input Voltage: Specified Vac, Nameplate rated: Vac 2. Input Frequency: Specified Hz, Nameplate rated 50-60Hz 3. Output Regulation: +/- 5% measured at the output connector 4. Line Voltage Regulation: +/- 2% typical measured at full load 5. Output Ripple (Vp-p): +/-2% maximum, measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of the output connector 6. Turn-ON/OFF Overshoot: 5% maximum, 500uS typical recovery time for 25% to 50% step load 7. Turn-ON Delay: 3 Seconds, full load, nominal line 8. Hold-Up Time: 8 ms nominal input voltage and full load 9. Inrush Current: 60A maximum cold 240Vac input 10. Switching Frequency: 100 KHz typical B) PROTECTION 1. Over-Voltage: Protected with a Zener diode clamp across the output 2. Short Circuit: Hiccup with auto recovery 3. Over-load: Hiccup with auto recovery 4. Input Protection: Input line and neutral fusing C) SAFETY 1. Dielectric Withstand Voltage: 5656Vdc from primary to secondary 2. Earth Leakage Current: N/A for Class II units, there is no PE Ground pin, so Earth Leakage current is not measured 3. Touch Current: Maximum allowed values: 100uA NC(Normal condition) 500uA SFC(single fault condition) D) OTHER: 1. MTBF: 200, C ambient temperature 2. Operating Temperature: 0 C to 40 C ambient temperature 3. Humidity: 0% to 90% relative humidity 4. Storage Temperature: -10 C to 80 C 5. Cooling: Convection Page 2 of 11

3 E) ENCLOSURE 1. Housing: High impact plastic, 94V0 polycarbonate, non-vented 2. Size: (L) x (W)46.47 x (H)38.2 +/-1.0 mm 3. Markings: Label and/or Pad Printed and/or Molded in the case 4. LED: Standard GREEN color to indicate power out Page 3 of 11

4 INPUT CONFIGURATION Blades/Cord Included: R-DI: R-Series Desktop Insert Blades/Cord Installed: R-DI: R-Series Desktop Insert IEC 60320/C8 AC Inlet connector Mates with IEC 60320/C7 Plug Optional INPUT BLADES: R-Socket: below are available blades configurations which are "not included" (unless stated above); can be purchased separately, package with power supply or as a separate "R-KIT" if specified 1. Class II model NEMA 1-15P AC power plug with 2 prongs, R-NA-2(R) 2. Australian AS 3112 configuration: SAA 2 pins Class II, R-SAA-2(R) 3. UK BS 1363 configuration: UK 2 pins (dummy Ground) Class II, R-UK-2(R) 4. European CEE 7/16 configuration: Europlug 2 PINS, Class II, R-EU-2(R) 5. Desktop Insert Kits 05. R-KIT: 1,2,3,4 above 06. R-KIT-INTL: 2,3,4 above Standard Cordsets Below are standard cordsets which are "not included" (unless stated above); these can be purchased separately or packaged with the power supply. Contact your Sales Engineer if the style required is not shown below. Many more available in different lengths, colors or cable material. GT P/N Length Country Description F703A(R) 6 FT North American 2 COND: SPT-2, 18/2, 6, BLACK, UL/CSA, NEMA 1-15P to IEC 320/C7 Page 4 of 11

5 M8703A(R) 2 M European 2 COND: H05VVH2F, 2X0.75, 1.8M, VDE, S, N, D, ect., CEE 7/16 to IEC 320/C M703A(R) 2 M Australia 2 COND: H05VVH2F, 2X0.75, 2M, SAA, AS3112 to IEC 320/C7 451J3401M8703A(R) 2 M Japan 2 COND: VFF, 2X0.75mm2, 1.8M, PSE, JIS8303 to IEC 320/C M703A(R) 2 M UK/Ireland 2 COND: H03VVH2F, 2X0.75, 2M, BSI, BS1363 to IEC 320/C M8703A(R) 2 M Swiss 2 COND: H03VVH2F, 2X0.75, 1.8M, SEV, CEE 7/16 to IEC 320/C M8703A(R) 2 M Italy 2 COND: H03VVH2F, 2X0.75, 1.8M, IMQ, CEE 7/16 to IEC 320/C M8703A(R) 2 M Demark 2 COND: H03VVH2F, 2X0.75,1.8M, D, CEE 7/16 to IEC 320/C M8703(R) 2 M India/ Africa 2 COND: H05VVF 3x0.75, 1.8M, BS546 to IEC 320/C7 (YL-H03VVH2-F) M8703(R) 2 M China 2 COND: RVV (227IEC52), 2X0.75mm2, 1.8M, CCC, GB (1996) to IEC 320/C7 Page 5 of 11

6 OUTPUT CORD AND CONNECTOR: C1/C0750 ACTUAL CONNECTORS, OVERMOLDS, FERRITES MAY VARY SLIGHTLY FROM THE PICTURE BELOW CABLE TYPE UL 1185 CABLE LENGTH (MM) 1830 CABLE TOLERANCE (MM) WIRE GAUGE (AWG) 18 CONDUCTORS 1C + Shield HANK DIMENSION (mm) 80 mm CABLE / CONNECTOR OVERMOLD COLOR GlobTek Black FERRITE TYPE / DIMENSION Core Size: 14.2*28.5*8.2 FERRITE # OF TURNS 2 Pass thru core FERRITE DIMENSION FROM STRAIN RELIEF 50mm +/-10 FERRITE DIMENSION FROM PLUG PLUG TYPE OVER MOLD ORIENTATION CONNECTOR PIN OUT: ADDITIONAL REQUIREMENTS N/A Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal Straight Center Positive (+V) ADDITIONAL OUTPUT PLUG OPTIONS ARE AVAILABLE AT STANDARD PLUGS AND CONNECTORS CAN BE SEEN ONLINE AT Page 6 of 11

7 LABEL:L-1186 LABEL P/N: Standard GT MATERIAL: Flat Thermal Transfer, Imprintable, Polyester Label and/or Pad Printed and/or Molded in the case BACKGROUND COLOR:Black TEXT COLOR: White or Silver LABEL WIDTH (mm): 37.5 LABEL HEIGHT (mm): 33.5 Below is the minimum information which will appear on the label. NOTE: in the logo area additional/actual positioning of symbols and text is subjected to change as per agency updates/requirements or additional model approvals become available. Agency logos may be in Logo area on the label or molded into the case housing outside the label area. Information will be shown via Label and/or Pad Printed and/or Molded in the case A=Medical Power Supply & ITE Power Supply B=P/N: ( 料号 ) RR9KE2500CCPCIMRVB C=Model:( 型号 ) GTM T2 D=Input:( 输入 ) V~, Hz, 1.5A E=Output:( 输出 ) 12 V = = = 2.5 A AGENCY ONLINE DOCUMENTS Logo Approvals Logo Description Attention Mark / Refer to operating manual for operating and service instructions Book up to 36 Volts rd Operating Instructions Page 7 of 11

8 N136 STR E C-TICK to 55022, C-TICK tested to comply with AUSTRALIA section 182 of The Radio Communication Act Of 1992 No Logo Applicable No Logo No Logo Applicable CB report IEC : CORR. 1 (2006) + CORR. 2 (2007) and or EN :2006 3rd Edition including 2MOOP requirements CB Certificate IEC :2005 (2nd Edition), Am 1: 2009, CB report IEC :2005 (2nd Edition), Am 1: 2009 and EN : Am 1: Am 11: Am 12:2011 CB to th Edition (Safety of Household and Similar Electrical Appliances, Part 1: General Requirements) CB Report/ Certificate IEC :2010 Up to 36 volts only CE Mark: tested to comply with EN55022:2006/A1:2007 Class B, EN , EN including EN , EN , EN , EN , EN N EN ; EMI: Complies with EN55011 CLASS B and FCC Part 15B CE Mark: tested to comply with EN , EN and EN , including EN , EN , EN , EN , EN , EN , EN , EN EMI: Complies with EN55011 CLASS B and FCC Part 15 B CHINA SJ/T , China RoHS Chart: cruus UL Recognized Component E rd Edition w-rm ANSI-AAMI ES ( C1:09 + A2:10) and CAN-CSA-C22.2 No (2008) UL , culus to UL , 2nd Edition, and CSA C22.2 No , 2nd Edition, Double Insulation FCC PART 15 CLASS B GOST-R mark for Russia (Document: Indoor Use Only IP40 IP52 OPTIONAL LPS Ingress Protection: IP40 to IEC60529:2001 Protection against granular foreign bodies Ingress Protection: IP52 to IEC60529:2001 Protected against dust - limited ingress (no harmful deposit) and Protected against direct sprays up to 15 degrees from the vertical Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe) Limited Power Source PSE to J60950 RoHS 2 RoHS 2: Complies with EU 2011/65/EU and CHINA SJ/T Serial Number Information SIQ IEC/EN (Safety of Household and Similar Electrical Appliances, Part 1: General Requirements) up to 36 volts Page 8 of 11

9 SIQ Mark License Certificate EN :2006 +Am 1: Am 11 : Am 12:2011 SIQ Mark License EN , 3rd edition 1O139 Ukraine UKRSepro (Document: /html/iso_certificates/gt_ukraine.pdf) Japan: Voluntary Control Council for Interference (VCCI) WEEE: Complies with EU 2012/19/EU ( Center Positive (+V) Page 9 of 11

10 PACKAGING Packing Spec P/N: Desktop/WPI with Desktop Insert Box Qty: 60.0 Gift Box Size (mm): 142*62*60 mm Gift Box Color: White Master Carton Size (mm): 442*330*275 Master GW (Kg): 15.2 kg BLADES INCLUDED: R-DI: R-Series Desktop Insert BLADE/CORD INSTALLED: R-DI: R-Series Desktop Insert Page 10 of 11

11 INSTRUCTION SHEET N/A Page 11 of 11