APM-40 SERIES FEATURES PRODUCT OVERVIEW. Model Selection Guide. Input Specifications. AC/DC Power Module 40W, Industrial & Medical Safety

Transcription

1 FEATURES Fully encapsulated Plastic Case 3 Mounting Versions: - PCB Mounting with Solder Pins - Chassis Mounting with Screw Terminals - DIN-Rail Mounting Package Dimension 88.9x63.5x30.0 mm (PCB Version) Universal Input 85-64VAC, Hz Protection Class ll Extended Operating Temp.Range -40 C to +60 C at full Load LED Output Indicator (Chassis Version Models) Eco Design, compliant to Energy Star specification and ErP Directive 009/5/EC Industrial Safety to UL/IEC/EN and UL508 Medical Safety Approval to UL/IEC/EN rd Edition Over Load and Over Temperature Protection 3 Year Product Warranty PRODUCT OVERVIEW The new MINMAX APM-40 series is a range of fully encapsulated AC/DC power modules. These high performance products feature an extended operating temperature range of -40 C to +80 C. Universal input voltage 85-64VAC and UL/IEC/EN safety approvals including medical safety and UL508 listing qualify these power supplies modules for applications in products with worldwide markets. The modules comply with the latest European ErP Directive and meet Energy Star requirements. EMI-filter meets EN550, class B and FCC,part5, class B. The APM-40 series power modules provide an economical solution for many space critical applications in commercial, medical and industrial electronic equipment. Model Selection Guide Model Number PCB Mounting (For model with Chassis Mounting, add suffix C) Output Voltage Output Current Max. 5VAC, 60Hz Input Load 30VAC, 50Hz Max. capacitive Load Efficiency Load, 5VAC VDC ma ma(typ.) μf % APM-40S APM-40S APM-40S APM-40S APM-40D ± ± # 84 APM-40D5 ±5 ± # 84 Input Specifications # For each output Parameter Model Min. Typ. Max. Unit AC Voltage Input Range VAC Input Frequency Range Hz All Models DC Voltage Input Range VDC No-Load Power Consumption W 5VAC A Inrush Current (Cold Start at 5 ) 30VAC A 0/08/0 P Page of 5

2 Output Specifications Parameter Conditions Min. Typ. Max. Unit Output Voltage Accuracy --- ± % Line Regulation --- ± % Load Regulation Single Output Model --- ± % Dual Output Models --- ± % Min.Load No minimum Load Requirement Ripple & Noise (0MHz) 5VDC Output Models %VPP of Vo Other Output Models %VPP of Vo Over Voltage Protection Zener diode clamp % of Vo Temperature Coefficient --- ± %/ Overshoot % Current Limitation 85VAC, Hiccup Mode, auto-recovery % Inom. Short Circuit Protection General Specifications Hiccup mode, indefinite (automatic recovery) (long term overload condition may cause damage) Parameter Conditions Min. Typ. Max. Unit I/O Isolation Voltage (reinforced) VACrms Leakage Current μa I/O Isolation Resistance 500 VDC MΩ Switching Frequency KHz Hold-up Time 5VAC, 60Hz ms 30VAC, 50Hz ms MTBF (calculated) MIL-HDBK-7F@5, Ground Benign TBD Hours EMC Emission Conducted and radiated EN 550 class B, EN 550 class B, FCC part 5 Class B Standard Specification Requirement Performance Criteria EN Air ±8KV Cont. ±4KV B EN ~000MHz, 0V/m 80% AM, KHz modulation A EN AC port ±KV DC, SL, TL ±KV not less than min. B EN /50μS(8/0μS) AC dif. ±KV DC ±KV B EMC Immunity according EN ~80MHz, 0Vrms (functional earth ports included) EN B 80% AM, KHz modulation EN Hz/60Hz, 30A/m A EN %, 0ms B 60%, 00ms, 95%, 5000ms C Protection Class II According IEC/EN Safety (Approvals pending) IEC/EN , rd, XMOPP cul/ul , rd, XMOPP, UL 508 listed Input Fuse External Fuse (Recommended) All Models 3.5A Slow Blow Type Environmental Specifications Parameter Conditions Temperature Range (operational) Ambient Power Derating Above +60.5W / Storage Temperature Range Over Temperature Protection Shutdown at 90 (automatic recovery at approx. 67 ) Humidity (non condensing) % rel. H Cooling Free-Air convection 0/08/0 P3 Page of 5

3 Notes This product is not designed for use in critical life support systems, equipment used in hazardous environment, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. Specifications typical at Ta=+5, resistive load, 5VAC, 60Hz input voltage, after warm-up time rated output current unless otherwise noted. 3 Ripple & Noise measurement bandwidth is 0~0 MHz, measured with a 0.μF/50V MLCC and a μf/50v Aluminum electrolytic. 4 Safety approvals cover frequency Hz. 5 All AC/DC modules should be externally fused at the front end for protection. 6 Other input and output voltage may be available, please contact factory. 7 To order the module with chassis mount package, please add a suffix C (e.g. APM-40S05C). 8 Part number for DIN-Rail mounting bracket: AC-DIN-0 9 That natural convection is about 0LFM but is not equal to still air (0 LFM). 0 Specifications are subject to change without notice. Package Specifications PCB Mounting [0.60] [0.50] [0.63].7 [0.50] 3.6 [.4] 5.4 [0.60] [0.4] [.8] 0.7 [0.03].0 [ 0.04] Pin Connections Pin Single Output Dual Output AC (N) AC (N) AC (L) AC (L) 3 +Vout +Vout 4 No Pin No Pin 5 -Vout Common 6 No Pin No Pin 7 NC -Vout Mounting M4.0 Thread 8.3 [3.0] 88.9 [3.50] NC: No Connection Bottom View [.0] 63.5 [.50] 5.0 [0.0] All dimensions in mm (inches) Tolerance: ±0.5 (±0.0) Pin diameter.0 ±0. (0.04±0.004) Case Size : 88.9x63.5x30.0mm (3.50x.50x.8 inches) Pin Material : Copper Alloy with Gold Plate Over Nickel Subplate 0/08/0 P3 Page 3 of 5

4 Package Specifications Chassis Mounting (order code suffix C) 4 x O 3.5 Indication LED POWER "GOOD" INDICATOR Top view 00.0 [3.94].0 [4.4] 50.0 [.97] 63.8 [.5] Connections Pin Single Output Dual Output AC (N) AC (N) AC (L) AC (L) 3 +Vout +Vout 4 NC NC 5 -Vout Common 6 NC NC 7 NC -Vout NC: No Connection 9.0 [3.6] 0.0 [0.39] 34. [.34] All dimensions in mm (inches) 5.0 [0.0] 6.8 [0.66] Tolerance: ±0.5 (±0.0) Case Size :.0x63.8x34.mm (4.4x.5x.34 inches) Package Specifications with DIN Rail Mounting Bracket 4 x O 3.5 Indication LED Top view 50.0 [.97] 63.8 [.5] POWER "GOOD" INDICATOR 00.0 [3.94].0 [4.4] 9.0 [3.6] 0.0 [0.39] 3.0[0.].0[0.43] 5.0 [0.0] 6.8[0.66] 34. [.34] Case Size :.0x63.8x34.mm (4.4x.5x.34 inches) 0/08/0 P3 Page 4 of 5

5 DIN-Rail Mounting Bracket (Order code for Kit : AC-DIN-0) Minmax Technology Co., Ltd. 8, Sin Sin Road, An-Ping Industrial District, Tainan 70, Taiwan Tel: Fax: sales@minmax.com.tw 0/08/0 P3 Page 5 of 5