Controller Modules Main Feature Part Number MOXoc Dynamic CPU 1x Ethernet MX

Transcription

1 MOX Open Controller MOX Open Controller Controller Modules Main Feature Part Number MOXoc Dynamic CPU 1x Ethernet MX MOXoc Dynamic CPU +RDN 1x Ethernet, Optical RDN Link, SOE Sync Port MX Power Supply Modules Main Feature Part Number MOXoc System 24Vdc PSU Accepts wide input range of Vdc MX I/O Interface Modules * Main Feature Part Number MOXoc MoxBUS IOIF (Coaxial SMA) Bus Interface Module supporting MOX 603 Rack I/O MX MOXoc Profibus IOIF (Twisted Pair) Bus Interface Module supporting Profibus DP I/O MX MOXoc MoxNET IOIF (7 x RJ45) Bus Interface Module supporting MoxNET (7E) MX MOXoc MoxNET IOIF (6 x RJ45, 1 x Fiber) Bus Interface Module supporting MoxNET (6E1F) MX Other Modules Main Feature Part Number MOXoc Blank Module Module for filling an empty slot on MOXoc MX Other Components Main Feature Part Number MOXoc 4 Slot Backplane Accepts 4 modules in any order, accepts dual PSU modules MX MOX Software Configurator Main Feature Part Number MoxGRAF V4.x (128pt License) Parallel Port Dongle, Limit of 128 I/O MX MoxGRAF V4.x (Unlimited License) Parallel Port Dongle, Unlimited I/O MX MoxGRAF V4.x (128pt License) USB Port Dongle, Limit of 128 I/O MX MoxGRAF V4.x (Unlimited License) USB Port Dongle, Unlimited I/O MX Cables and Connectors Main Feature Part Number MoxBUS 1m Drop Cable 1m Drop Cable with SMA Connectors MX MoxBUS 5m Drop Cable 5m Drop Cable with SMA Connectors MX MoxBUS T-Connector Tap Connector for connecting Drop Cable to Trunk Cable MX MoxBUS Terminator 50 ohm Terminator for MoxBUS Cabling MX Ethernet 1m STP Patch Lead 1m Cat 5 E STP patch cable with RJ45 Connectors MX Ethernet 3m STP Patch Lead 3m Cat 5 E STP patch cable with RJ45 Connectors MX Ethernet 5m STP Patch Lead 5m Cat 5 E STP patch cable with RJ45 Connectors MX Optical Cable Kit 1m 2x 1m Optical Link Cables with SC Connectors MX Optical Cable Kit 5m 2x 5m Optical Link Cables with SC Connectors MX Profibus Angled Connector up to 12Mbps Integrated Termination Resistor, Spring Cage Connector MX MOX Open Controller March 2008 Page 1

2 MOX Field Controllers MOX Unity Field Controllers Main Feature Part Number MOX Unity (16MB) 2x Serial RS232/485 Ports, 1x Ethernet, 16MB Flash RAM MX base MOX Unity (32MB) 2x Serial RS232/485 Ports, 1x Ethernet, 32MB Flash RAM MX base MOX Unity (64MB) 2x Serial RS232/485 Ports, 1x Ethernet, 64MB Flash RAM MX base MOX Unity with Additional Ports (16MB) 4x Serial RS232/485 Ports, 2x Ethernet, 16MB Flash RAM MX base MOX Unity with Additional Ports (32MB) 4x Serial RS232/485 Ports, 2x Ethernet, 32MB Flash RAM MX base MOX Unity with Additional Ports (64MB) 4x Serial RS232/485 Ports, 2x Ethernet, 64MB Flash RAM MX base MOX Unity with Ultra CPU (32MB) 2x Serial RS232/485 Ports, 2x Ethernet, 32MB Flash RAM MX base MOX Unity to suit Power Mgmt Option (32MB) 2x Serial RS232/485 Ports, 1x Ethernet, 32MB Flash RAM MX base MOX Unity with Additional Ports to suit Power Mgmt Option (32MB) 4x Serial RS232/485 Ports, 2x Ethernet, 32MB Flash RAM MX base MOX Unity with Isolated RS485 Ports (32MB) 4x Isolated Serial RS485 Ports, 2x Ethernet, 32MB Flash RAM MX base MOX Unity, Feature Options Main Feature Part Number GSM/GPRS Module For Wireless Multipoint Communications (for MX , MX , MX , MX and MX ) -01 MoxBUS Module (SMA) For Moxbus Communications with MoxBUS CPE Module -09 Video Frame Grabber (B&W) Video Frame Grabber (Colour) Frame Grabber (B&W) and GSM/GPRS Module Frame Grabber (Colour) and GSM/GPRS Module Power Management Module Power Management and GSM/GPRS Module 512x512 Grey Scale Frame Grabber (for MX only) 640x480 Colour Frame Grabber (for MX only) Combination Grey Scale Frame Grabber and GSM/GPRS (for MX only) Combination Colour Frame Grabber and GSM/GPRS (for MX only) Power Management Module including UPS Battery Charger (for MX , MX , & MX only) Combination Power Management Module and GSM/GPRS (for MX , MX , & MX only) Feature Option not Selected (not applicable to MX or MX ) MOX Unity, IO Options * Main Feature Part Number Select four modules of any combination. The part number specifies the selected modules and installation position 24Vdc Digital Input Module, 8 Channel 8x 24Vdc Digital Inputs -1 Digital Relay Output Module, 8 Channel 8x Vac / 24Vdc Digital Outputs mA Analog Input Module, 8 Channel 8x 4-20mA Analog Inputs mA Analog Output Module, 8 Channel 8x 4-20mA Analog Outputs V Analog Input Module, 8 Channel 8x 0-5V Analog Inputs -6 Isolated Analog Input Module, 4 Channel 4x 4-20mA Isolated Analog Inputs -7 Isolated Analog Input Module, 4 Channel 3x 4-20mA Isolated and 1x 0-30Vdc Non-isloated Analog Inputs -8 24Vdc Digital Output Module, 8 Channel 8x 24Vdc Digital Outputs -9 Part Number for Selected IO Options (4 Digits) - x x x x IO Option Not Selected MOX Field Controllers March 2008 Page 1

3 MOX Gateway Main Feature Part Number MX602 Serial Gateway 4x Serial RS232/485 Ports, 2x Ethernet, 16MB Flash RAM MX MX602 Gateway (16MB) 2x Serial RS232/485 Ports, 2x Ethernet, 16MB Flash RAM MX base MX602 Gateway (32MB) 2x Serial RS232/485 Ports, 2x Ethernet, 32MB Flash RAM MX base MOX Gateway, Protocol Options Main Feature Part Number Profibus DP Master Profibus DP Master Port - 08 InterBus Port Generation 4 Functionality - 09 ControlNet ControlNet Specification Release 2 Certified - 10 DeviceNet Master, explicit peer to peer messaging - 11 CANOpen Master with up to 127 CANOpen Nodes - 12 Modbus Plus Peer to peer messaging - 13 AS-Interface 2 Channel Master with up to 31 slaves per channel - 14 MOX Gateway, Comms Options Main Feature Part Number GSM/GPRS Module For Wireless Multipoint Communications -02 MOX 606 IoNix Main Feature Part Number MOX 606 IoNix CPU-01 Module 2x Serial RS232/485 Ports, 1x 10/100 Ethernet MX MOX 603 PSU Module 24VDC Power Supply Required for Rack Based I/O MX MOX IoNix, Data Storage Options Main Feature Part Number 16 Mbyte Flash RAM 16 Mbyte Storage Capacity for User Program and Data -05 base 32 Mbyte Flash RAM 32 Mbyte Storage Capacity for User Program and Data -06 MOX IoNix, Communications Options Main Feature Part Number MOX 606 GSM/GPRS Module For Wireless Multipoint Communications MX IoNix Base Units Main Feature Part Number CPU Base - CPU-01 Dual Base for MX PSU Module and CPU-01 Module MX GSM/GPRS Base Base for MOX 606 GSM/GPRS Module MX MOX Software Configurator Main Feature Part Number MoxGRAF V4.x (128pt License) Parallel Port Dongle, Limit of 128 I/O MX MoxGRAF V4.x (Unlimited License) Parallel Port Dongle, Unlimited I/O MX MoxGRAF V4.x (128pt License) USB Port Dongle, Limit of 128 I/O MX MoxGRAF V4.x (Unlimited License) USB Port Dongle, Unlimited I/O MX MOX Field Controllers March 2008 Page 2

4 MOX 603 Modular I/O Standalone Serial I/O Main Feature Part Number Digital Input Modules 8 Channel 24Vdc Individually Isolated MX Channel 24Vdc Module Powered Input MX Channel 24Vdc Counter Input MX Digital Output Modules 8 Channel 240Vac / 30Vdc Relay Output MX Channel 24Vdc Module Powered Output (Basic) MX Channel 24Vdc Module Powered Output MX Analog Input Modules 8 Channel 4-20mA Individually Isolated MX Channel 4-20mA Module Powered Input MX Channel 4-20mA Input MX Channel 1-5V Input MX Channel Thermocouple and mv Input MX Channel RTD and Ω Input MX Analog Output Modules 8 Channel 4-20mA Individually Isolated MX Base Unit Main Feature Part Number IO Base - Terminal Connectors Designed for Individual Standalone Operation 2x RS485, 1x RS232 MX IO Base - Terminal to Bus Connectors Designed as First Base when Connecting Multiple Bases, 2x RS485 MX IO Base - Bus Connectors Designed for Connecting in Multiple Base Configuration, 2x RS485 MX IO Base - Bus to Terminal Connectors Designed as Last Base Extension for Multiple Bases, 2x RS485 MX Standalone Ethernet I/O Main Feature Part Number Digital Input Modules 8 Channel 24Vdc Individually Isolated MX Channel 24Vdc Module Powered Input MX Channel Counter Module MX Digital Output Modules 8 Channel 240Vac / 30Vdc Relay Output MX Channel 24Vdc Module Powered Output (Basic) MX Channel 24Vdc Module Powered Output MX Analog Input Modules 8 Channel 4-20mA Individually Isolated MX Channel 4-20mA Module Powered Input MX Channel 4-20mA Input MX Channel 1-5V Input MX Channel Thermocouple and mv Input MX Channel RTD and Ω Input MX Analog Output Modules 8 Channel 4-20mA Individually Isolated MX Base Unit Main Feature Part Number IO Base - Terminal Connectors For Individual Standalone Operation, 2x RS485, 1x RS232,1x 10BaseT MX IO Base - Terminal to Bus Connectors First Base when Connecting Multiple Bases, 2x RS485, 1x 10BaseT MX IO Base - Bus Connectors For Connecting in Multiple Base Configuration, 2x RS485, 1x 10BaseT MX IO Base - Bus to Terminal Connectors For Individual Standalone Operation, 2x RS485, 1x RS232,1x 10BaseT MX MOX 603 Modular I/O March 2008 Page 1

5 Rack Based I/O (Bottom Wiring) Main Feature Part Number Digital Input Modules 8 Channel 24Vdc Individually Isolated MX Channel 24Vdc Module Powered Input MX Channel Counter Module MX Channel SOE - High Speed <1ms Input Module MX Digital Output Modules 8 Channel 240Vac / 30Vdc Relay Output MX Channel 24Vdc Module Powered Output (Basic) MX Channel 24Vdc Module Powered Output MX Analog Input Modules 8 Channel 4-20mA Individually Isolated MX Channel 4-20mA Module Powered Input MX Channel 4-20mA Input MX Channel 1-5V Input MX Channel Thermocouple and mv Input MX Channel RTD and Ω Input MX Analog Output Modules 8 Channel 4-20mA Individually Isolated MX Base Unit Main Feature Part Number IO Base - 1 Slot Standard Module IO Base Unit for Single Module for use in Rack Configuration MX IO Base - 1 Slot for TC Module IO Base Unit for TC with internal Cold Junction Compensation MX IO Base - 1 Slot with 24Vdc Input IO Base Unit for Single Module with external 24Vdc input terminals MX Rack Based I/O (Front Wiring) Main Feature Part Number Digital Input Modules 16 Channel 24Vdc Module Powered Input (4 Isolated groups of 4 channels) MX Channel 24Vdc Module Powered Input MX Channel Counter Module MX Channel 115Vac Input Module MX Channel 230Vac Input Module MX Digital Output Modules 12 Channel 240Vac / 30Vdc Relay Output MX Channel 24Vdc Module Powered Output (Basic) MX Analog Input Modules 12 Channel 4-20mA Input MX Channel 1-5V Input MX Channel Thermocouple and mv Input MX Channel RTD and Ω Input (Three Wire Only) MX Analog Output Modules 8 Channel 4-20mA Individually Isolated Module Powered MX Base Unit Main Feature Part Number IO Base - 1 Slot for Front Wiring Module IO Base Unit for Single Front Wiring Module for use in Rack Configuratio MX MOX 603 Power Supply for Rack I/O Main Feature Part Number MOX 603 PSU Module 24VDC Power Supply Required for Rack Based I/O MX Base Unit Main Feature Part Number PSU Base - Rack Bottom side terminal inputs; right side bus connectors MX MOX 603 Modular I/O March 2008 Page 2

6 MOX 603 Comms Processor for Rack I/O Main Feature Part Number CP Module Serial RS232 1x Serial RS232, 1x Serial RS485 MX CP Module Serial RS485 2x Serial RS485 MX CPE Module Ethernet 10Base-T Ethernet; 1xRJ45 MX CPE Module Combo Ethernet/MoxBUS 10Base-T Ethernet and MoxBUS; 1xRJ45, 1xSMA MX CPE Module Combo Fiber/Ethernet Fiber and 10Base-T Ethernet; 1x SC Pair, 1xRJ45 MX CPE Module Combo MoxBUS/Ethernet/MoxBUFiber and 10Base-T Ethernet and MoxBUS; 1x SC Pair, 1xRJ45, 1xSMA MX CP Ethernet to Serial Gateway 10Base-T Ethernet and MoxBUS; 1xRJ45, 1xSMA MX CPP Module Profibus DP Slave Dual Profibus DP Slave; 2xProfibus DP Port MX Base Unit Main Feature Part Number CP/CPE Base For Serial CP Modules and all CPE Modules MX CPP Base - Profibus For CPP Profibus DP Slave MX MOX 603 Other Modules Main Feature Part Number MOX 603 Blank Module Module for Filling an Empty MOX 603 Slot, requires Base MX Cables and Connectors Main Feature Part Number MoxBUS 1m Drop Cable 1m Drop Cable with SMA Connectors MX MoxBUS 5m Drop Cable 5m Drop Cable with SMA Connectors MX MoxBUS T-Connector Tap Connector for connecting Drop Cable to Trunk Cable MX MoxBUS Terminator 50 ohm Terminator for MoxBUS Cabling MX Ethernet 1m STP Patch Lead 1m Cat 5 E STP patch cable with RJ45 Connectors MX Ethernet 3m STP Patch Lead 3m Cat 5 E STP patch cable with RJ45 Connectors MX Ethernet 5m STP Patch Lead 5m Cat 5 E STP patch cable with RJ45 Connectors MX Optical Cable Kit 1m 2x 1m Optical Link Cables with SC Connectors MX Optical Cable Kit 5m 2x 5m Optical Link Cables with SC Connectors MX Profibus Angled Connector up to 12Mbps Integrated Termination Resistor, Spring Cage Connector MX MOX 603 Modular I/O March 2008 Page 3

7 MOSAIC Software Comparison Component Microsoft Windows GUI Communications drivers Points Connections** Clusters Mosaic SCADA Mosaic for Unix Mosaic for Windows MC Full System License Windows MCU Base system 5 connections MCW Base system 5 connections MC Full System License Unix MCU Base system 10 connections MCW Base system 10 connections 1 included. Additional GUIs at extra cost 1 included. Additional drivers at extra cost 500 points included. Additional points at extra cost All connections at extra cost Single cluster included. Additional clusters can be ed at extra cost All GUIs to be purchased at extra cost All standard drivers included. Specialty drivers available at extra cost. All points to be purchased at extra cost 5 included (MCU ) itional at extra cost 10 included (MCU ) itional at extra cost System limited to single cluster. Additional clusters cannot be ed All GUIs to be purchased at extra cost All standard drivers included. Specialty drivers available at extra cost. All points to be purchased at extra cost 5 included (MCW ) itional at extra cost 10 included (MCW ) itional at extra cost System limited to single cluster. Additional clusters cannot be ed Real Time Database Included MCU Server for Unix MCW Server for Windows Data Historian 1 included (non-redundant). Replications at extra cost To be purchased 1 per server. To be purchased 1 per server. Event Historian 1 included (non-redundant). Replications at extra cost Includes RTDB, Trend & Event historian Includes RTDB, Trend & Event historian Web GUI Available at extra cost of web server license + individual web GUI licenses Available at extra cost of web server license + individual web GUI licenses Available at extra cost of web server license + individual web GUI licenses ** Connections include: OPC client connections, ODBC connections, & API connections. Drivers are not counted towards the connection count. MOSAIC Software Comparison March 2008

8 MOSAIC SCADA Software Mosaic SCADA Software Entry Level System Single Server (Windows)/ Single User Interface (Windows) Single Server (Unix)/ Single User Interface (Windows) Part Number MC MC GUI (Desktop Licence) 1 Data Historian (non-redundant, 4 weeks max storage) 1 Event Historian (non-redundant, 4 weeks max storage) 500pt Database Licence (without redundancy) 1 Communications Driver (to be selected by customer from list below) Full System (non-redundant Historian) Full System Site Licence (Windows) / Single User Interface (Windows) Full System Site Licence (Unix) / Single User Interface (Windows) Please specify total servers on site (-xx is the total number) Part Number MC xx MC xx Single Cluster Site License 1 GUI (Desktop Licence) 1 Data Historian (non-redundant, unrestricted time) 1 Event Historian (non-redundant, unrestricted time) 500pt Database Licence (with redundancy, single Cluster) 1 Communications Driver (to be selected by customer from list below) System Upgrade Part Number Entry Level to Full System Upgrade Converts Entry Level Licence to a Full System Licence MC Does not include redundancy for Historians Total System Clusters Main Feature Part Number Clustered Server Licenses Please specify total clusters (-xx is the total number) MC xx 1 Cluster only, included with Server License 2-3 total Clusters (pricing per itional cluster) 4-6 total Clusters (per itional cluster over 3) 7 + total Clusters (per itional cluster over 6) please specify the total clusters in the Part Number -xx A single Cluster is supplied with the Server License One Cluster required for each Control Centre Control Centres are usually separated by a WAN Each Cluster Includes a 500 point licence Total System Points Main Feature System point Count Please specify total points ( -xx is total Points) MC xx (included in each Cluster) ,000 (Price per itional point over 500) 10,001-20,000 (Price per itional point over 10,000) 20,001-50,000 (Price per itional point over 20,000) 50, ,000 (Price per itional point over 50,000) 100, ,000 (Price per itional point over 100,000) 200,001 + (Price per itional point over 200,000) "Points" includes; analogues, digitals, controllable and derived (calculated) points Points gathered and replicated from other Clusters are counted once and do not require itional licensing Please specify total point count at time of ordering MOSAIC SCADA Software March 2008 Page 1

9 Graphical User Interface Desktop GUI (User Interface) Main Feature Part Number Microsoft Windows GUI Please specify total GUIs (-xx is total GUIs) MC xx 1 (included) 2-5 (Price per itional user over 1) 6-10 (Price per itional user over 5) (Price per itional user over 10) (Price per itional user over 20) (Price per itional user over 50) (Price per itional user over 100) Each concurrently logged-in instance of the Desktop including remote User Interfaces running via Citrix, are counted as a User and will require a licence GUI is designed for Windows 2000, 2003, XP Web GUI (User Interface) Main Feature Part Number Web Server Module Site License One license is requred for the full system MC WEB Client GUI Please specify total WEB Client GUIs (-xx is total WEB Client GUIs) MC xx 1-5 (Price per user) 6-10 (Price per itional user over 5) (Price per itional user over 10) (Price per itional user over 20) (Price per itional user over 50) (Price per itional user over 100) Options Each concurrently logged-in instance of the Web Client are counted as a User and will require a licence Dispalys the same level of information as the Desktop GUI Redundant Historian Main Feature Part Number Data Historian (per Replication) Records and stores all numerical data changes MC Event Historian (per Replication) Records and stores text based events; alarms, status MC Required to replicate Data and Event History to other nodes One licence required for each instance of a replicated Historian Communications Drivers Main Feature Part Number DNP3.0 Master DNP3.0 Level 2 Master Functionality MC IEC IEC 870 Serial Communications Protcol MC IEC IEC 870 Instrumentation Protocol MC IEC IEC 870 Ethernet Protocol MC Modbus Standard Serial ModbusRTU Protocol MC Generic ASCII User Definable ASCII Protocol MC MoxBUS MOX Proprietary Protocol for DCS Solutions MC GE Fanuc GE Fanuc Proprietary Protocol MC AB Datahighway Plus (DH+) Allen Bradley Proprietary Protocol MC Motorola MDLC Motorola Proprietary Protocol MC Kingfisher 2 Kingfisher Proprietary Protocol MC Conitel C2020/C2025 Conitel Proprietary Protocol MC One Communications Driver from this list is included in the System Licence Driver licences are valid system-wide Multiple instances of Drivers do not require itional licences Other protocols are available on request Additional Connectivity Main Feature Part Number OPC Server Server for OPC Open Connectivitiy Standard MC OPC Client (per connection) Single Connection Client License for OPC Standard MC OPC Client (per site) Site Client License for OPC Standard MC ODBC (per concurrent user) Single Connection Client License for ODBC MC ODBC (per site) Site Client License for ODBC MC API (per connection) Interface for User specific applications MC Optional Modules Main Feature Part Number Pager Interface Remote Alarm Messaging System for Mosaic SCADA MC API Development Environment Programming interface for User specific applications MC MOSAIC SCADA Software March 2008 Page 2

10 MOSAIC for UNIX Software Mosaic for UNIX Software Main Feature Part Number Base system - 5 connections Single Cluster System 5 Connections Standard Communications Drivers MCU Base system - 10 connections Server for Unix Single Cluster System 10 Connections Standard Communications Drivers 1 Real Time Database 1 Data Historian(Records all numerical data changes) 1 Event Historian(Records text based events; alarms; status) MCU MCU Total System Points Main Feature Part Number System point Count Please specify total points ( -xx is total Points) MCU xx (Price per point) ,000 (Price per point over 5000) 20,001-50,000 (Price per point over 20,000) 50, ,000 (Price per point over 50,000) 100,000 + (Price per point over 100,000) Desktop GUI (User Interface) Main Feature Part Number Microsoft Windows GUI Please specify total GUIs (-xx is total GUIs) MCU xx Price per GUI Web GUI (User Interface) Main Feature Part Number WEB Server Site License 1 License required for the full system MCU WEB Client GUI Please specify total WEB Client GUIs (-xx is total WEB Client GUIs) MCU xx Price per WEB Client GUI Specialty Communications Drivers Main Feature Part Number DNP3.0 DNP3.0 Level 2 Master Functionality MCU IEC IEC 870 Serial Communications Protcol MCU IEC IEC 870 Instrumentation Protocol MCU IEC IEC 870 Ethernet Protocol MCU Conitel C2020/C2025 Conitel Proprietary Protocol MCU Additional Connectivity Main Feature Part Number ODBC (per concurrent user) Single Connection Client License for ODBC MCU API (per connection) Interface for User specific applications MCU Optional Modules Main Feature Part Number Pager Interface Remote Alarm Messaging System for Mosaic for Unix MCU MOSAIC for UNIX Software March 2008 Page 1

11 MOSAIC for Windows Software Mosaic for Windows Software Main Feature Part Number Base system - 5 connections Single Cluster System 5 Connections Standard Communications Drivers MCW Base system - 10 connections Server for Windows Single Cluster System 10 Connections Standard Communications Drivers 1 Real Time Database 1 Data Historian(Records all numerical data changes) 1 Event Historian(Records text based events; alarms; status) MCW MCW Total System Points Main Feature Part Number System point Count Please specify total points (-xx is total Points) MCW xx Price per point Desktop GUI (User Interface) Main Feature Part Number Microsoft Windows GUI Please specify total GUIs (-xx is total GUIs) MCW xx Price per GUI Web GUI (User Interface) Main Feature Part Number WEB Server Site License 1 License required for the full system MCW WEB Client GUI Please specify total WEB Client GUIs (-xx is total WEB Client GUIs) MCW xx Price per WEB Client GUI Specialty Communications Drivers Main Feature Part Number DNP3.0 DNP3.0 Level 2 Master Functionality MCW IEC IEC 870 Serial Communications Protcol MCW IEC IEC 870 Instrumentation Protocol MCW IEC IEC 870 Ethernet Protocol MCW Conitel C2020/C2025 Conitel Proprietary Protocol MCW Additional Connectivity Main Feature Part Number OPC Server Server for OPC Open Connectivitiy Standard MCW OPC Client (per connection) Single Connection Client License for OPC Standard MCW ODBC (per concurrent user) Single Connection Client License for ODBC MCW API (per connection) Interface for User specific applications MCW Optional Modules Main Feature Part Number Pager Interface Remote Alarm Messaging System for Mosaic for Windows MCW MOSAIC for Windows Software March 2008 Page 1

12 MOSAIC Unix Real Time Database MOSAIC RTDB Main Feature Part Number System point count for single server Please specify total points ( -xx is total Points) MCU xx Single server license. - Including: 1 Real Time Database for Single server 1 Data Historian(Records all numerical data changes) 1 Event Historian(Records text based events; alarms; status) - 25 connections 500 points 1,000 points 3,000 points 5,000 points 10,000 points 15,000 points 20,000 points 25,000 points 30,000 points 40,000 points 50,000 points 75,000 points 100,000 points 150,000 points System point count for server pair Please specify total points ( -xx is total Points) MCU xx Two server license. - Each server including: 1 Real Time Database for Single server 1 Data Historian(Records all numerical data changes) 1 Event Historian(Records text based events; alarms; status) - 25 connections included for the total system N 500 points 1,000 points 3,000 points 5,000 points 10,000 points 15,000 points 20,000 points 25,000 points 30,000 points 40,000 points 50,000 points 75,000 points 100,000 points 150,000 points MOSAIC Unix Real Time Database March 2008 Page 1

13 MOSAIC OEM for MOXoc MOSAIC OEM for MOXoc Main Feature Part Number OEM License Please specify total GUIs (-xx is total GUIs) MCO xx Each OEM license includes: 1 Driver (MoxBUS only) 1 Real Time Database 1 Data Historian(Records all numerical data changes) 1 Event Historian(Records text based events; alarms; status) 1 Desktop GUI Price per license MOSAIC OEM for MOXoc March 2008 Page 1