Datasheet. ChiMei Innolux G133IGE-L03 CH

Size: px

Start display at page:

Download "Datasheet. ChiMei Innolux G133IGE-L03 CH"

Abigayle Pope
5 years ago
Views:

1 Datasheet ChiMei Innolux G33IGE-L3 CH--45 The information contained in this document has been carefully researched and is, to the best of our knowledge, accurate. However, we assume no liability for any product failures or damages, immediate or consequential, resulting from the use of the information provided herein. Our products are not intended for use in systems in which failures of product could result in personal injury. All trademarks mentioned herein are property of their respective owners. All specifications are subject to change without notice.

2 Tentative Specification Preliminary Specification Approval Specification MODEL NO. G33IGE SUFFIX L3 Customer APPROVED BY SIGNATURE Name / Title Note Please return copy for your confirmation with your signature and comments APPL yuhsiang.chang ( /54-922) Director Accept Version. 6 April 2 / 27

3 - CONTENTS - REVISION HISTORY GENERAL DESCRIPTION OVERVIEW.2 FEATURES.3 APPLICATION.4 GENERAL SPECIFICATIONS.5 MECHANICAL SPECIFICATIONS 2. ABSOLUTE MAXIMUM RATINGS ABSOLUTE RATINGS OF ENVIRONMENT 2.2 ELECTRICAL ABSOLUTE RATINGS 2.2. TFT LCD MODULE LED CONVERTER 3. ELECTRICAL CHARACTERISTICS RECOMMENDED OPERATIN CONDITION 3.2 BACKLIGHT UNIT 4. BLOCK DIAGRAM TFT LCD MODULE 5. INPUT TERMINAL PIN ASSIGNMENT LVDS I/O PIN ASSIGNMENT 5.2 BACKLIGHT PIN ASSIGNMENT 5.3 TIMING DIAGRAM OF LVDS INPUT SIGNAL 5.4 COLOR DATA INPUT ASSIGNMENT 6. INTERFACE TIMING TIMING CHARACTERISTICS 6.2 POWER ON/OFF SEQUENCE 7. OPTICAL CHARACTERISTICS TEST CONDITIONS 7.2 OPTICAL SPECIFICATIONS 8. RELIABILITY TEST RELIABILITY TEST CONDITION 9. PACKAGING PACKING SPECIFICATION 9.2 PACKING METHOD. DEFINTION OF LABEL CMI MODULE LABEL. PRECAUTIONS ASSEMBLY AND HANDLING PRECAUTIONS.2 SAFETY PRECAUTIONS 2. MECHANICAL CHARACTERISTICS Version. 6 April 2 2 / 27

4 REVISION HISTORY Version Date Section Description Ver. Apr. 6, All G33IGE-L3 Preliminary specification was first issued. Version. 6 April 2 3 / 27

. GENERAL DESCRIPTION. OVERVIEW G33IGE-L3 is a 3.3 TFT Liquid Crystal Display module and 2 pins LVDS interface. This module supports 28 x 8 WXGA mode and can display 262K or 6.2M colors.

5 . GENERAL DESCRIPTION. OVERVIEW G33IGE-L3 is a 3.3 TFT Liquid Crystal Display module and 2 pins LVDS interface. This module supports 28 x 8 WXGA mode and can display 262K or 6.2M colors. The converter circuit for LED is built in..2 FEATURES - WXGA (28 x 8 pixels) resolution - LVDS (Low Voltage Differential Signaling) interface - LED light source.3 APPLICATION - Industry Application.4 GENERAL SPECIFICATINS Item Specification Unit Note Diagonal Size 3.3 inch Active Area x 78.8 mm Bezel Opening Area 289. x 8.8 mm () Driver Element a-si TFT active matrix - - Pixel Number 28 x R.G.B. x 8 pixel - Pixel Pitch.2235 x.2235 mm - Pixel Arrangement RGB vertical stripe - (2) Display Colors 262k or 6.2M color - Display Mode Normally White - - Surface Treatment Anti-glare, Hard Coating ( 3H ) - - Module Power Consumption (6.5) W Typ. Note () Please refer to the attached drawings for more information of front and back outline dimensions. Note (2).5 MECHANICAL SPECIFICATIONS Version. 6 April 2 4 / 27

6 Item Min. Typ. Max. Unit Note Horizontal (H) mm Module Size Vertical (V) mm () Depth (D) - (7.4) (7.9) mm Weight - (365) (38) g Note () Please refer to the attached drawings for more information of front and back outline dimensions. Version. 6 April 2 5 / 27

7 2. ABSOLUTE MAXIMUM RATINGS 2. ABSOLUTE RATINGS OF ENVIRONMENT Item Symbol Value Min. Max. Unit Operating Ambient Temperature T OP ºC Storage Temperature T ST ºC Note () Temperature and relative humidity range is shown in the figure below. (2) Wet-bulb temperature should be 39 ºC Max. (Ta > 4 ºC). (3) No condensation. Note Relative Humidity (%RH) 8 6 Operating Range 4 2 Storage Range Temperature (ºC) Version. 6 April 2 6 / 27

8 2.2 ELECTRICAL ABSOLUTE RATINGS 2.2. TFT LCD MODULE Ta = 25 ± 2 ºC Item Symbol Value Min. Max. Unit Note Power Supply Voltage Vcc (-.3) (4) V () LED CONVERTER Item Symbol Value Min. Max. Unit Note Converter Voltage V i (4.5) (24) V (), (2) Enable Voltage EN --- (5.5) V Backlight Adjust ADJ --- (5.5) V Note () Permanent damage to the device may occur if maximum values are exceeded. Function operation should be restricted to the conditions described under Normal Operating Conditions. Note (2) Specified values are for LED converter (Refer to 3.2 for further information). Version. 6 April 2 7 / 27

9 3. ELECTRICAL CHARACTERISTICS 3. RECOMMENDED OPERATION CONDITION Ta = 25 ± 2 ºC Parameter Symbol Value Min. Typ. Max. Unit Note Power Supply Voltage Vcc (3.) (3.3) (3.6) V - Permissive Ripple Voltage V RP (5) mv - Rush Current I RUSH (.5) A (2) Initial Stage Current I IS (.) A (2) Power Supply Current White (33) (37) ma (3)a Icc Black (45) (49) ma (3)b LVDS Differential Input High Threshold V TH(LVDS) (+) mv (4), V CM =.2V LVDS Differential Input Low Threshold V TL(LVDS) (-) mv (4) V CM =.2V LVDS Common Mode Voltage V CM (.7) (2.) V (4) LVDS Differential Input Voltage V ID () (6) mv (4) Terminating Resistor R T () Ohm Note () The assembly should be always operated within above ranges. Note (2) Measurement Conditions Vcc Q 2SK475 FUSE C3 Vcc (LCD Module Input) R uf 47K (High to Low) (Control Signal) SW +2V R2 K Q2 2SK47 VR 47K C2 C.uF uf Vcc rising time is 47µs Vcc.9Vcc.Vcc GND 47µs Version. 6 April 2 8 / 27

10 Note (3) The specified power supply current is under the conditions at Vcc = 3.3V, Ta = 25 ± 2 ºC, f v = 6 Hz, whereas a power dissipation check pattern below is displayed. a. White Pattern b. Black Pattern Active Area Active Area Note (4) The parameters of LVDS signals are defined as the following figures. Single Ended VCM VID V Differential V TH(LVDS) V V TL(LVDS) VID Version. 6 April 2 9 / 27

11 3.2 BACKLIGHT UNIT Ta = 25 ± 2 ºC Parameter Symbol Value Min. Typ. Max. Unit Note Converter Power Supply Voltage V i (.8) (2.) (3.2) V Converter Power Supply Current I i --- (.43) --- Vi = 2V (Duty %) Converter Power Consumption P LED --- (5.6) --- Vi = 2V (Duty %) EN Control Level Backlight on (.6) --- (5) V Backlight off () --- () V PWM Control Level PWM High Level (.3) --- (5) V PWM Low Level () --- (.65) V PWM Control Duty Ratio () () % PWM Control Frequency f PWM () (2) (K) Hz LED Life Time L L (3,) Hrs (2) Note () LED current is measured by utilizing a high frequency current meter as shown below Note (2) The lifetime of LED is defined as the time when it continues to operate under the conditions at Ta = 25 ±2 and I LED = 2mA DC (LED forward current) until the brightness becomes 5% of its original value. Note (3) Please note that LED life will be shorter than the average life described in the specification if operate in higher ambient temperature. Input Power Pi Power Supply Vi, Ii GND Converter LED Backlight Unit Version. 6 April 2 / 27

12 4. BLOCK DIAGRAM 4. TFT LCD MODULE FRC RX3(+/-) RX(+/-) RX(+/-) RX2(+/-) CLK(+/-) VCC_IN GND INPUT CONNECTOR (HIROSE-DF9KR-2P-H) LVDS INPUT / TIMING CONTROLLER DC/DC CONVERTER & REFERENCE VOLTAGE SCAN DRIVER IC TFT LCD PANEL (28x R.G.B.x8) DATA DRIVER IC Vi CONVERTER CONNECTOR (E&T 388K-F5N-3L) LED Converter LED BACKLIGHT UNIT Version. 6 April 2 / 27

13 5. INPUT TERMINAL PIN ASSIGNMENT 5. LVDS I/O PIN ASSIGNMENT Pin Symbol Description Polarity Remark Vss Ground 2 Vcc Power Supply +3.3 V (typical) 3 Vcc Power Supply +3.3 V (typical) 4 NC Non-Connection 5 FRC Dithering control setting When FRC=H, the width of data input 8 bits H is 3.3V When FRC=L, the width of data input 6 bits L is GND and set Dx and Dx to logical low (Default is L) 6 Rxin3- LVDS Differential Data Input Negative 7 Rxin3+ LVDS Differential Data Input Positive 8 Rxin- LVDS Differential Data Input Negative 9 Rxin+ LVDS Differential Data Input Positive Vss Ground Rxin- LVDS Differential Data Input Negative 2 Rxin+ LVDS Differential Data Input Positive 3 Vss Ground 4 Rxin2- LVDS Differential Data Input Negative 5 Rxin2+ LVDS Differential Data Input Positive 6 Vss Ground 7 CLK- LVDS Clock Data Input Negative 8 CLK+ LVDS Clock Data Input Positive 9 Vss Ground 2 Vss Ground LVDS Level Clock Note () User s connector Part No. DF9G-2S-SD (HIROSE) or equivalent DF9G-2S-For DF9G-2S-C 5.2 BACKLIGHT PIN ASSIGNMENT (Converter connector pin) Pin Symbol Description Remark Vi Converter input voltage 2V 2 VGND Converter ground Ground 3 EN Enable pin 3.3V 4 ADJ Backlight Adjust PWM Dimming (Hi 3.3VDC, Lo VDC) 5 NC Not Connect Ground Note () User s connector Part No E&T H28K-P5N-2B or equivalent Version. 6 April 2 2 / 27

14 5.3 TIMING DIAGRAM OF LVDS INPUT SIGNAL Version. 6 April 2 3 / 27

15 Version. 6 April 2 4 / COLOR DATA INPUT ASSIGNMENT The brightness of each primary color (red, green and blue) is based on the 6-bit gray scale data input for the color. The higher the binary input, the brighter the color. The table below provides the assignment of color versus data input. ( Low Level Voltage, High Level Voltage) Data Signal Red Green Blue Color R5 R4 R3 R2 R R G5 G4 G3 G2 G G B5 B4 B3 B2 B B Basic Colors Black Red Green Blue Cyan Magenta Yellow White Gray Scale Of Red Red() / Dark Red() Red(2) Red(6) Red(62) Red(63) Gray Scale Of Green Green() / Dark Green() Green(2) Green(6) Green(62) Green(63) Gray Scale Of Blue Blue() / Dark Blue() Blue(2) Blue(6) Blue(62) Blue(63)

16 Version. 6 April 2 5 / 27 The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for the color. The higher the binary input, the brighter the color. The table below provides the assignment of color versus data input. ( Low Level Voltage, High Level Voltage) Data Signal Red Green Blue Color R7 R6 R5 R4 R3 R2 R R G7 G6 G5 G4 G3 G2 G G B7 B6 B5 B4 B3 B2 B B Basic Colors Black Red Green Blue Cyan Magenta Yellow White Gray Scale Of Red Red() / Dark Red() Red(2) Red(253) Red(254) Red(255) Gray Scale Of Green Green()/ Dark Green() Green(2) Green(253) Green(254) Green(255) Gray Scale Of Blue Blue() / Dark Blue() Blue(2) Blue(253) Blue(254) Blue(255)

17 6. INTERFACE TIMING 6. TIMING CHARACTERISTICS The specifications of input signal timing are as the following table and timing diagram. Signal Item Symbol Min. Typ. Max. Unit Note DCLK Frequency /Tc (5) (7) (8) MHz - Vertical Total Time TV (8) (823) (23) TH - DE Vertical Addressing Time TVD (8) (8) (8) TH - Horizontal Total Time TH (36) (44) (8) Tc - Horizontal Addressing Time THD (28) (28) (28) Tc - INPUT SIGNAL TIMING DIAGRAM TVD Tv DE TH DCLK DE TC THD DATA Version. 6 April 2 6 / 27

18 6.2 POWER ON/OFF SEQUENCE To prevent a latch-up or DC operation of LCD assembly, the power on/off sequence should be as the diagram below.9vcc.9vcc.vcc VCC LVDS T T2 VALID 9% % T3 T7.VCC T4.9Vi.9Vi Vi.Vi.Vi T5 T6 9% PWM DIMMING % T8 T9 BL ON/OFF 9% % Power ON/OFF sequence Note () Please avoid floating state of interface signal at invalid period. Note (2) When the interface signal is invalid, be sure to pull down the power supply of LCD VCC to V. Note (3) The Backlight converter power must be turned on after the power supply for the logic and the interface signal is valid. The Backlight converter power must be turned off before the power supply for the logic and the interface signal is invalid. Parameter Value Min Typ Max Units T (.5) - () ms T2 () - (5) ms T3 () - (5) ms T4 (5) - - ms T5 (2) - - ms T6 () - - ms T7 (5) (3) ms T8 () - - ms T9 () - - ms Version. 6 April 2 7 / 27

19 7. OPTICAL CHARACTERISTICS 7. TEST CONDITIONS Item Symbol Value Unit Ambient Temperature Ta 25±2 o C Ambient Humidity Ha 5± %RH Supply Voltage V CC 3.3 V Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS" Current I f 2±3 ma Converter Duty % Note () I f means the forward current of each channel 7.2 OPTICAL SPECIFICATIONS The relative measurement methods of optical characteristics are shown in 7.2. The following items should be measured under the test conditions described in 7. and stable environment shown in Note (6). Item Symbol Condition Min. Typ. Max. Unit Note Rx (.66) Red Ry (.342) Color Chromaticity Green Blue White Gx (.338) Gy Typ (.54) Bx.5 (.58) By (.44) Wx θ x =, θ Y = (.33) Viewing Normal Angle Wy (.329) Typ +.5 (), (6) Center Luminance of White L C (4) (5) cd/m 2 (4), (6) Contrast Ratio CR (55) (8) - (2), (6) Response Time White Variation Viewing Angle Horizontal Vertical T R (6) () Ms (3) T F () (5) Ms δw (.25) (.4) - (5), (6) θ x + (6) (7) θ x - (6) (7) CR Deg. (), (6) θ Y + (5) (6) θ Y - (5) (6) Version. 6 April 2 8 / 27

20 Note () Definition of Viewing Angle (θx, θy) Normal θx = θy = º θy- θy+ θx- = 9º x- θx θx+ y+ 2 o clock direction θy+ = 9º 6 o clock θy- = 9º y- x+ θx+ = 9º Note (2) Definition of Contrast Ratio (CR) The contrast ratio can be calculated by the following expression. Contrast Ratio (CR) = L63 / L L63 Luminance of gray level 63 L Luminance of gray level CR = CR (5) CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (5). Note (3) Definition of Response Time (T R, T F ) and measurement method % 9% Gray Level 63 Gray Level 63 Optical Response % Gray Level % Time T F T R ms ms Version. 6 April 2 9 / 27

21 Note (4) Definition of Luminance of White (L C ) Measure the luminance of gray level 63 at center point L C = L (5) L (x) is corresponding to the luminance of the point X at Figure in Note (5). Note (5) Definition of White Variation (δw) Measure the luminance of gray level 63 at 5 points δw = Maximum [L (), L (2), L (3), L (4), L (5)] / Minimum [L (), L (2), L (3), L (4), L (5)] Horizontal Line D D/4 D/2 3D/4 Vertical Line W W/4 W/2 3W/ X Test Point X= to 5 Active Area Note (6) Measurement Setup The LCD module should be stabilized at given temperature for 2 minutes to avoid abrupt temperature change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting Backlight for 2 minutes in a windless room. LCD Module LCD P anel USB2 CS-2T Center of the Screen 5 mm Light Shield Room (Ambient Luminance < 2 l ux) Version. 6 April 2 2 / 27

22 8. RELIABILITY TEST 8. RELIABILITY TEST CONDITION No. Test Item Test Condition Note High Temperature Storage 8, 24 hours 2 Low Temperature Storage -3, 24 hours 3 Thermal Shock Storage {(-3,.5 hour) ( 8,.5 hour)}, cycles 4 High Temperature Operating 7, 24 hours () (2) 5 Low Temperature Operating -3, 24 hours 6 High Temperature & High Humidity Operating 6, 9% RH, 24hours 7 Shock (Non-Operating) 2G, 2ms, half sine wave, time for ± X, ± Y, ± Z. (3) 8 Vibration (Non-Operating).5G,~3Hz,min/cycle,3 cycles each X,Y,Z (3) Note () There should be no condensation on the surface of panel during test. Note (2) The temperature of panel display surface area should be 8 Max. Note (3) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so that the module would not be twisted or bent by the fixture. Note (4) In the standard conditions, there is no function failure issue occurred. All the cosmetic specification is judged before the reliability test. Version. 6 April 2 2 / 27

23 9. PACKAGING 9. PACKING SPECIFICATIONS () 2pcs LCD modules / Box (2) Box dimensions 52(L)x3(W)x45(H)mm (3) Weight approximately 3 Kg (2modules per box) 9.2 PACKING METHOD () Carton Packing should have no failure in the following reliability test items. Test Item Test Conditions Note Vibration ISTA STANDARD Random, Frequency Range 2 2 Hz Top & Bottom 3 minutes (+Z), min (-Z), Non Operation Right & Left minutes (X) Back & Forth minutes (Y) Dropping Test Angle, 3 Edge, 6 Face, 6 cm Non Operation Figure. 9- Packing method Version. 6 April 2 22 / 27

24 Figure. 9-2 Packing method Version. 6 April 2 23 / 27

25 . DEFINITION OF LABEL. CMI MODULE LABEL The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation. CHI MEI OPTOELECTRONICS G33IGE -L3 Rev.XX E27943 MADE IN TAIWAN RoHS X X X X X X X Y M D L N N N N (a) Model Name G33IGE -L3 (b) Revision Rev. XX, for example A,, C, C2 etc. (c) Serial ID X X X X X X X Y M D X N N N N Serial No. CMI Internal Use Year, Month, Date CMI Internal Use Revision CMI Internal Use Serial ID includes the information as below (a) Manufactured Date Year ~9, for 2~29 Month ~9, A~C, for Jan. ~ Dec. Day ~9, A~Y, for st to 3 st, exclude I, O and U (b) Revision Code cover all the change Serial No. Manufacturing sequence of product Version. 6 April 2 24 / 27

26 . PRECAUTIONS. ASSEMBLY AND HANDLING PRECAUTIONS () Do not apply rough force such as bending or twisting to the module during assembly. (2) To assemble or install module into user s system can be only in clean working areas. The dust and oil may cause electrical short or worsen the polarizer. (3) It s not permitted to have pressure or impulse on the module because the LCD panel and Backlight will be damaged. (4) Always follow the correct power sequence when LCD module is connecting and operating. This can prevent damage to the CMOS LSI chips during latch-up. (5) Do not pull the I/F connector in or out while the module is operating. (6) Do not disassemble the module. (7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily scratched. (8) It is dangerous that moisture come into or contacted the LCD module, because moisture may damage LCD module when it is operating. (9) High temperature or humidity may reduce the performance of module. Please store LCD module within the specified storage conditions. () When ambient temperature is lower than ºC may reduce the display quality. For example, the response time will become slowly. () Do not keep same pattern in a long period of time. It may cause image sticking on LCD.2 SAFETY PRECAUTIONS () Do not disassemble the module or insert anything into the Backlight unit to prevent electrical shock. (2) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap. (3) After the module s end of life, it is not harmful in case of normal operation and storage. Version. 6 April 2 25 / 27

29 Our company network supports you worldwide with offices in Germany, Great Britain, Italy, Turkey and the USA. For more information please contact Distec GmbH Augsburger Str. 2b 82 Germering Germany Phone +49 ()89 / Fax +49 ()89 / info@datadisplay-group.de Internet Display Technology Ltd. 5 The Oaks Business Village Revenge Road, Lordswood Chatham, Kent, ME5 8LF United Kingdom Phone +44 ()634 / Fax +44 ()634 / info@datadisplay-group.co.uk Internet Apollo Display Technologies, Corp. 87 Raynor Avenue, Unit Ronkonkoma, NY 779 United States of America Phone + 63 / Fax + 63 / info@datadisplay-group.com Internet Sales Partner Sales Partner REM Italy s.a.s. di Michieletto Flavio & C. Via Obbia Bassa, I-35 Trebaseleghe (PD) Italy Phone info@remitaly.com Internetwww.remitaly.com DATA DISPLAY BİLİŞİM TEKNOLOJİLERİ İÇ VE DIŞ TİCARET LİMİTED ŞİRKETİ Barbaros Mh Ak Zamabak Sk A Blok D43 Ataşehir/İstanbul Turkey Phone +9 ()26 / Fax +9 ()26 / info@data-display.com.tr Internetwww.data-display.com.tr

MODEL NO.: G121S1-L02

MODEL NO.: G121S1-L02 Datasheet pdf - http//www.datasheet4u.net/ Issued Date Jan., 2 Model No. G2S-L2 TFT LCD Specification MODEL NO. G2S-L2 Customer Approved by Note FOR MORE INFORMATION AZ DISPLAYS, INC. 75 COLUMBIA, ALISO