MODEL NO.: N089L6 - L03

Transcription

1 Doc No Issued Date Feb. 26, 29 Model No. N89L6 - L3 TFT LCD Specification MODEL NO. N89L6 - L3 Customer Approved by Note CST PMMD III Director annie_hsu( Director Accept /56522 / 54873) / 29 Version 2.

2 Doc No Issued Date Feb. 26, 29 Model No. N89L6 - L3 - CONTENTS - REVISION HISTORY GENERAL DESCRIPTION OVERVIEW.2 FEATURES.3 APPLICATION.4 GENERAL SPECIFICATIONS.5 MECHANICAL SPECIFICATIONS 2. ABSOLUTE MAXIMUM RATINGS ABSOLUTE RATINGS OF ENVIRONMENT 2.2 RELIABILITY TEST 2.3 ELECTRICAL ABSOLUTE RATINGS 2.3. TFT LCD MODULE BACKLIGHT UNIT 3. ELECTRICAL CHARACTERISTICS TFT LCD MODULE 3.2 BACKLIGHT UNIT 4. BLOCK DIAGRAM TFT LCD MODULE 5. INPUT TERMINAL PIN ASSIGNMENT TFT LCD MODULE 5.2 TIMING DIAGRAM OF LVDS INPUT SIGNAL 5.3 COLOR DATA INPUT ASSIGNMENT 5.4 EDID CODE DATA STRUCTURE 6. CONVERTER SPECIFICATION ABSOLUTE MAXIMUM RATINGS 6.2 RECOMMENDED OPERATING RATINGS 6.3 LED BACKLIGHT CONTROLL POWER SEQUENCE 7. INTERFACE TIMING INPUT SIGNAL TIMING SPECIFICATIONS 7.2 POWER ON/OFF SEQUENCE 8. OPTICAL CHARACTERISTICS TEST CONDITIONS 8.2 OPTICAL SPECIFICATIONS 9. PRECAUTIONS SYSTEM MATCHING PRECAUTIONS 9.2 HANDLING PRECAUTIONS 9.3 STORAGE PRECAUTIONS 9.4 OPERATION PRECAUTIONS 9.5 OTHER PRECAUTIONS. PACKING CARTON.2 PALLET. DEFINITION OF LABELS CMO MODULE LABEL.2 CMO CARTON LABEL 2 / 29 Version 2.

3 Doc No Issued Date Feb. 26, 29 Model No. N89L6 - L3 REVISION HISTORY Version Date Page (New) Section Description Ver. 2. Feb.4, 29 All All specification first issued. Ver. 2. Feb.26, General Specifications modified Absolute maximum ratings modified 7 3. TFT LCD Module modified. 5. Input terminal pin assignment modified. 3 / 29 Version 2.

4 Doc No Issued Date Feb. 26, 29 Model No. N89L6 - L3. GENERAL DESCRIPTION. OVERVIEW N89L6 - L3 is a 8.9 TFT Liquid Crystal Display module with LED Backlight unit and 4 pins LVDS interface. This module supports 24 x 6 Wide-SVGA mode and can display 262,44 colors. The optimum viewing angle is at 6 o clock direction. The converter module for Backlight is built in..2 FEATURES - WSVGA (24 x 6 pixels) resolution - Thin, light and low power consumption - DE only mode - 3.3V LVDS (Low Voltage Differential Signaling) interface with pixel/clock - Build in LED Converter.3 APPLICATION - TFT LCD Notebook.4 GENERAL SPECIFICATIONS Item Specification Unit Note Active Area 95.72(H) x 3.4(V) mm Bezel Opening Area 98.27(H) x 6.6(V) mm () Driver Element a-si TFT active matrix - - Pixel Number 24 x R.G.B. x 6 pixel - Pixel Pitch.95(H) X.89(V) mm - Pixel Arrangement RGB vertical stripe - - Display Colors 262,44 color - Transmissive Mode Normally white - - Surface Treatment Hard coating (3H), Anti-glare Type MECHANICAL SPECIFICATIONS Item Min. Typ. Max. Unit Note Horizontal (H) mm Module Size Vertical (V) mm Depth (D) mm () Depth (D2) mm Weight g - Note () Please refer to the attached drawings for more information of front and back outline dimensions. 4 / 29 Version 2.

5 Doc No Issued Date Feb. 26, 29 Model No. N89L6 - L3 2. ABSOLUTE MAXIMUM RATINGS 2. ABSOLUTE RATINGS OF ENVIRONMENT Item Symbol Value Min. Max. Unit Note Storage Temperature T ST ºC () Operating Ambient Temperature T OP +5 ºC (), (2) Shock (Non-Operating) S NOP - 22/2 G/ms (3), (5) Vibration (Non-Operating) V NOP -.5 G (4), (5) Note () Note (2) (a) 9 %RH Max. (Ta 4 ºC). (b) Wet-bulb temperature should be 39 ºC Max. (Ta > 4 ºC). (c) No condensation. The temperature of panel display surface area should be ºC Min. and 6 ºC Max. Relative Humidity (%RH) Operating Range 4 2 Storage Range Temperature (ºC) Note (3) time for ± X, ± Y, ± Z. for Condition (22G / 2ms) is half Sine Wave,. Note (4) ~ 5 Hz, 3 min/cycle,cycles for each X, Y, Z axis. Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so that the module would not be twisted or bent by the fixture. The fixing condition is shown as below At Room Temperature LCD Module Side Mount Fixing Screw Side Mount Fixing Screw Stage Gap=2mm Bracket 5 / 29 Version 2.

6 Doc No Issued Date Feb. 26, 29 Model No. N89L6 - L3 2.2 ELECTRICAL ABSOLUTE RATINGS 2.2. TFT LCD MODULE Item Symbol Min. Value Max. Power Supply Voltage V CC V Logic Input Voltage V IN -.3 V CC +.3 V Note () Permanent damage to the device may occur if maximum values are exceeded. Function operation should be restricted to the conditions described under Normal Operating Conditions. Unit Note () BACKLIGHT UNIT Item LED Light Bar Power Supply Voltage LED Light Bar Power Supply Current Symbol Min. Value Max. Unit V L V I L 75 ma Note (), (2) Note () Permanent damage to the device may occur if maximum values are exceeded. Function operation should be restricted to the conditions described under Normal Operating Conditions. Note (2) Specified values are for LED (Refer to 3.2 for further information). 6 / 29 Version 2.

7 Doc No Issued Date Feb. 26, 29 Model No. N89L6 - L3 3. ELECTRICAL CHARACTERISTICS 3. TFT LCD MODULE Ta = 25 ± 2 ºC Parameter Symbol Value Min. Typ. Max. Unit Note Power Supply Voltage VCC V - Ripple Voltage V RP mv - Rush Current I RUSH A (2) Initial Stage Current I IS - -. A (2) Power Supply Current White ma (3)a Icc Black ma (3)b LVDS Differential Input High Threshold V TH(LVDS) mv (5), V CM =.2V LVDS Differential Input Low Threshold V TL(LVDS) mv (5) V CM =.2V LVDS Common Mode Voltage V CM V (5) LVDS Differential Input Voltage V ID - 6 mv (5) Terminating Resistor R T - - Ohm - Power per EBL WG P EBL W (4) Note () The ambient temperature is Ta = 25 ± 2 ºC. Note (2) I RUSH the maximum current when VCC is rising I IS the maximum current of the first ms after power-on Measurement Conditions Shown as the following figure. Test pattern black. +3.3V Q 2SK47 5 FUSE C3 Vcc (LCD Module Input) R uf 47K (High to Low) (Control Signal) SW +2V R2 K Q2 2SK47 VR 47K C C 2.uF u F 7 / 29 Version 2.

8 Doc No Issued Date Feb. 26, 29 Model No. N89L6 - L3 Vcc rising time is 47us Note (3) The specified power supply current is under the conditions at Vcc = 3.3 V, Ta = 25 ± 2 ºC, f v = 6 Hz, whereas a power dissipation check pattern below is displayed. a. White Pattern b. Black Pattern Active Area Active Area Note (4) The specified power are the sum of LCD panel electronics input power and the converter input power. Test conditions are as follows. (a) Vcc = 3.3 V, Ta = 25 ± 2 ºC, f v = 6 Hz, (b) The pattern used is a black and white 32 x 36 checkerboard, slide # from the VESA file Flat Panel Display Monitor Setup Patterns, FPDMSU.ppt. (c) Luminance 6 nits. 8 / 29 Version 2.

9 Doc No Issued Date Feb. 26, 29 Model No. N89L6 - L3 Note (5) The parameters of LVDS signals are defined as the following figures. Single Ended VCM VID V Differential V TH(LVDS) V V TL(LVDS) VID 3.2 BACKLIGHT UNIT Ta = 25 ± 2 ºC Parameter Symbol Value Min. Typ. Max. Unit Note LED Light Bar Power Supply Voltage V L V LED Light Bar Power Supply Current I L ma (),(2) (Duty %) Power Consumption P L W (3), (Duty %) LED Life Time L BL Hrs (4) Note () LED light bar configuration is shown as below. V L, I L Light Bar Feedback Channels LED Light Bar Note (2) For better LED light bar driving quality, it is recommended to utilize the adaptive boost converter with current balancing function to drive LED light-bar. Note (3) P L = I L V L Note (4) The lifetime of LED is defined as the time when it continues to operate under the conditions at Ta = 25 2 o C and I L = 2 ma(per EA) until the brightness becomes 5% of its original value. 9 / 29 Version 2.

10 Doc No Issued Date Feb. 26, 29 Model No. N89L6 - L3 4. BLOCK DIAGRAM 4. TFT LCD MODULE LVDS Display Data & Clock VCC GND Data EDID CLK EDID V EDID INPUT CONNECTOR LVDS INPUT / TIMING CONTROLLER DC/DC CONVERTER & REFERENCE VOLTAGE GENERATOR EDID EEPROM SCAN DRIVER IC TFT LCD PANEL DATA DRIVER IC Converter Input Signals LED CONVERTER BACKLIGHT UNIT / 29 Version 2.

11 Doc No Issued Date Feb. 26, 29 Model No. N89L6 - L3 5. INPUT TERMINAL PIN ASSIGNMENT 5. TFT LCD MODULE Pin Symbol Description Polarity Remark GND Ground 2 VCC Power Supply (+3.3V typ.) 3 VCC Power Supply (+3.3V typ.) 4 V EDID EDID power (+3.3V typ.) DDC 3.3V Power 5 NC No Connection (Reserved for CMO test) 6 CLK EDID EDID clock DDC Clock 7 DATA EDID EDID data DDC Data 8 Rxin- LVDS Differential Data Input Negative 9 Rxin+ LVDS Differential Data Input Positive GND Ground Rxin- LVDS Differential Data Input Negative 2 Rxin+ LVDS Differential Data Input Positive 3 GND Ground 4 Rxin2- LVDS Differential Data Input Negative 5 Rxin2+ LVDS Differential Data Input Positive 6 GND Ground 7 CLK- LVDS Clock Data Input Negative 8 CLK+ LVDS Clock Data Input Positive R~R5,G G~G5,B,B B2~B5,DE,Hsync,Vsync LVDS Level Clock 9 GND Ground 2 NC No Connection 2 NC No Connection 22 GND Ground 23 NC No Connection 24 NC No Connection 25 GND Ground 26 NC No Connection 27 NC No Connection 28 GND Ground 29 LED_VCCS LED Power 3 LED_VCCS LED Power 3 LED_GND LED Ground 32 LED_GND LED Ground 33 LED_GND LED Ground 34 NC No Connection 35 NC No Connection 36 NC No Connection 37 NC No Connection 38 LED_PWM PWM Control Signal of LED Converter (3) 39 NC No Connection 4 NC No Connection Note () Connector Part No. I-PEX E-2 or equivalent Note (2) User s connector Part No I-PEX T-3 or equivalent Note (3) BLU brightness is proportion to the duty of LED_PWM signal. Note (4) The first pixel is odd as shown in the following figure. / 29 Version 2.

12 Doc No Issued Date Feb. 26, 29 Model No. N89L6 - L3 5.2 TIMING DIAGRAM OF LVDS INPUT SIGNAL CLK+ T/7 Rxin2 IN2 IN9 IN8 IN7 IN6 IN5 IN4 DE Vsync Hsync B5 B4 B3 B2 Rxin IN3 IN2 IN IN IN9 IN8 IN7 B B G5 G4 G3 G2 G Rxin IN6 IN5 IN4 IN3 IN2 IN IN G R5 R4 R3 R2 R R Signal for DCLK Cycle (T) 2 / 29 Version 2.

13 Doc No Issued Date Feb. 26, 29 Model No. N89L6 - L3 3 / 29 Version COLOR DATA INPUT ASSIGNMENT The brightness of each primary color (red, green and blue) is based on the 6-bit gray scale data input for the color. The higher the binary input, the brighter the color. The table below provides the assignment of color versus data input. Data Signal Red Green Blue Color R5 R4 R3 R2 R R G5 G4 G3 G2 G G B5 B4 B3 B2 B B Basic Colors Black Red Green Blue Cyan Magenta Yellow White Gray Scale Of Red Red()/Dark Red() Red(2) Red(6) Red(62) Red(63) Gray Scale Of Green Green()/Dark Green() Green(2) Green(6) Green(62) Green(63) Gray Scale Of Blue Blue()/Dark Blue() Blue(2) Blue(6) Blue(62) Blue(63) Note () Low Level Voltage, High Level Voltage

14 Doc No Issued Date Feb. 26, 29 Model No. N89L6 - L3 5.4 EDID DATA STRUCTURE The EDID (Extended Display Identification Data) data formats are to support displays as defined in the VESA Plug & Display and FPDI standards. Byte # Byte # Value Value Field Name and Comments (decimal) (hex) (hex) (binary) Header Header FF 2 2 Header FF 3 3 Header FF 4 4 Header FF 5 5 Header FF 6 6 Header FF 7 7 Header 8 8 EISA ID manufacturer name ( CMO ) D 9 9 EISA ID manufacturer name (Compressed ASCII) AF A ID product code (N89L6-L3) 9 B ID product code (hex LSB first; N89L6-L3) 3 2 C ID S/N (fixed ) 3 D ID S/N (fixed ) 4 E ID S/N (fixed ) 5 F ID S/N (fixed ) 6 Week of manufacture (fixed week code) 2D 7 Year of manufacture (fixed year code) EDID structure version # ( ) 9 3 EDID revision # ( 3 ) Video I/P definition ( digital ) Max H image size ( 2.3cm ) Max V image size ( 2.9cm ) C 23 7 Display Gamma (Gamma = 2.2 ) Feature support ( Active off, RGB Color ) A 25 9 Rx, Rx, Ry, Ry, Gx, Gx, Gy, Gy B9 26 A Bx, Bx, By, By, Wx, Wx, Wy, Wy B Rx= C Ry=.362 5C 29 D Gx= E Gy= F Bx= By=.5 B 33 2 Wx= Wy= Established timings Established timings Manufacturer s reserved timings Standard timing ID # Standard timing ID # 4 28 Standard timing ID # Standard timing ID # 2 4 / 29 Version 2.

15 Doc No Issued Date Feb. 26, 29 Model No. N89L6 - L3 Byte # Byte # Value Value Field Name and Comments (decimal) (hex) (hex) (binary) 42 2A Standard timing ID # B Standard timing ID # C Standard timing ID # D Standard timing ID # E Standard timing ID # F Standard timing ID # Standard timing ID # Standard timing ID # Standard timing ID # Standard timing ID # Standard timing ID # Standard timing ID # Detailed timing description # Pixel clock ( 45MHz, According to VESA CVT Rev.) # Pixel clock (hex LSB first) # H active ( 24 ) # H blank ( 76 ) B 58 3A # H active H blank ( ) B # V active ( 6 ) C # V blank ( 25 ) 9 6 3D # V active V blank ( 6 25 ) E # H sync offset ( 53 ) F # H sync pulse width ("35 ) # V sync offset V sync pulse width ( 3 6 ) # H sync offset H sync pulse width V sync offset V sync width ( ) # H image size ( 95 mm ) C # V image size ( 3mm ) # H image size V image size ( 95 3 ) # H boarder ( ) 7 46 # V boarder ( ) 7 47 # Non-interlaced, Normal, no stereo, Separate sync, H/V pol Negatives Detailed timing description # # 2 Flag 74 4A # 2 Reserved 75 4B # 2 FE (hex) defines ASCII string (Model Name N89L6-L3, ASCII) FE 76 4C # 2 Flag 77 4D # 2 st character of name ( N ) 4E 78 4E # 2 2nd character of name ( ) F # 2 3rd character of name ( 8 ) # 2 4th character of name ( 9 ) # 2 5th character of name ( L ) 4C # 2 6th character of name ( 6 ) # 2 7th character of name ( - ) 2D # 2 8th character of name ( L ) 4C 5 / 29 Version 2.

16 Doc No Issued Date Feb. 26, 29 Model No. N89L6 - L3 Byte # (decimal) Byte # (hex) Field Name and Comments Value (hex) Value (binary) # 2 9th character of name ( ) # 2 th character of name ( 3 ) # 2 New line character indicates end of ASCII string A # 2 Padding with Blank character # 2 Padding with Blank character 2 9 5A Detailed timing description # 3 9 5B # 3 Flag 92 5C # 3 Reserved 93 5D # 3 FE (hex) defines ASCII string (Vendor CMO, ASCII) FE 94 5E # 3 Flag 95 5F # 3 st character of string ( C ) # 3 2nd character of string ( M ) 4D 97 6 # 3 3rd character of string ( O ) 4F # 3 New line character indicates end of ASCII string A # 3 Padding with Blank character 2 64 # 3 Padding with Blank character 2 65 # 3 Padding with Blank character # 3 Padding with Blank character # 3 Padding with Blank character # 3 Padding with Blank character # 3 Padding with Blank character 2 6 6A # 3 Padding with Blank character 2 7 6B # 3 Padding with Blank character 2 8 6C Detailed timing description # 4 9 6D # 4 Flag 6E # 4 Reserved 6F # 4 FE (hex) defines ASCII string (Model Name N89L6-L3, ASCII) FE 2 7 # 4 Flag 3 7 # 4 st character of name ( N ) 4E 4 72 # 4 2nd character of name ( ) # 4 3rd character of name ( 8 ) # 4 4th character of name ( 9 ) # 4 5th character of name ( L ) 4C 8 76 # 4 6th character of name ( 6 ) # 4 7th character of name ( - ) 2D 2 78 # 4 8th character of name ( L ) 4C 2 79 # 4 9th character of name ( ) A # 4 th character of name ( 3 ) B # 4 New line character indicates end of ASCII string A 24 7C # 4 Padding with Blank character D # 4 Padding with Blank character E Extension flag 27 7F Checksum 84 6 / 29 Version 2.

17 Doc No Issued Date Feb. 26, 29 Model No. N89L6 - L3 6. CONVERTER SPECIFICATION 6. ABSOLUTE MAXIMUM RATINGS Symbol Ratings LED_VCCS -.3V ~ 6.V LED_PWM -.3V ~ 6.V 6.2 RECOMMENDED OPERATING RATINGS I Parameter Symbol Value Min. Typ. Max. Unit Note Converter Input power supply voltage LED_VCCS V PWM Control Level PWM High Level V LED_PWM PWM Low Level -.5 V PWM Control Duty Ratio - % PWM Control Frequency f PWM Hz PWM Control Permissive Ripple Voltage VPWM_pp mv Vin=Min ma () Converter Input Current Vin=Typ ma () Vin=Max. LED ma () Note () The specified LED power supply current is under the conditions at LED_VCCS = Min, Typ, Max, Ta = 25 ± 2 ºC, f PWM = 2 Hz, Duty=%. 6.3 LED BACKLIGHT CONTROLL POWER SEQUENCE Power On Power Off % LED_VCCS V T A T B LED_PWM V Timing Specifications T A ms T B ms Note () Please follow the LED backlight power sequence as above. If the customer could not follow, it might cause backlight flash issue during display ON/OFF or damage the LED backlight controller 7 / 29 Version 2.

18 Doc No Issued Date Feb. 26, 29 Model No. N89L6 - L3 7. INTERFACE TIMING 7. INPUT SIGNAL TIMING SPECIFICATIONS The input signal timing specifications are shown as the following table and timing diagram. Signal Item Symbol Min. Typ. Max. Unit Note DCLK Frequency /Tc MHz - Vertical Total Time TV TH - Vertical Active Display Period TVD TH - DE Vertical Active Blanking Period TVB TV-TVD 25 TV-TVD TH Horizontal Total Time TH Tc (2) Horizontal Active Display Period THD Tc (2) Horizontal Active Blanking Period THB TH-THD 76 TH-THD Tc (2) Note () Because this module is operated by DE only mode, Hsync and Vsync are ignored. (2) channel LVDS input. INPUT SIGNAL TIMING DIAGRAM TVD Tv DE TH DCLK DE TC THD DATA 8 / 29 Version 2.

19 Doc No Issued Date Feb. 26, 29 Model No. N89L6 - L3 7.2 POWER ON/OFF SEQUENCE Power On Power Off Restart 9% 9% t7 - Power Supply for LCD, Vcc V % t t2 t3 % t4 % - LVDS Interface V Valid Data t5 t6 - Power for Backlight OFF 5% ON 5% OFF Timing Specifications.5 t ms t2 5 ms t3 5 ms t4 5 ms t5 2 ms t6 2 ms Note () Please follow the power on/off sequence described above. Otherwise, the LCD module might be damaged. Note (2) Please avoid floating state of interface signal at invalid period. When the interface signal is invalid, be sure to pull down the power supply of LCD Vcc to V. Note (3) The Backlight converter power must be turned on after the power supply for the logic and the interface signal is valid. The Backlight converter power must be turned off before the power supply for the logic and the interface signal is invalid. Note (4) Sometimes some slight noise shows when LCD is turned off (even backlight is already off). To avoid this phenomenon, we suggest that the Vcc falling time is better to follow 5us t7 ms. 9 / 29 Version 2.

20 Doc No Issued Date Feb. 26, 29 Model No. N89L6 - L3 8. OPTICAL CHARACTERISTICS 8. TEST CONDITIONS Item Symbol Value Unit Ambient Temperature Ta 25±2 o C Ambient Humidity Ha 5± %RH Supply Voltage V CC 3.3 V Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS" LED Light Bar Input Current I L 6 ma The measurement methods of optical characteristics are shown in Section 8.2. The following items should be measured under the test conditions described in Section 8. and stable environment shown in Note (5). 8.2 OPTICAL SPECIFICATIONS The relative measurement methods of optical characteristics are shown in 8.2. The following items should be measured under the test conditions described in 8. and stable environment shown in Note (5). Item Symbol Condition Min. Typ. Max. Unit Note Contrast Ratio CR (2), (5) Response Time T R ms T F ms (3) Average Luminance of White L 5p cd/m 2 (4), (5) Luminance Non-Uniformity δw 5p (5), (6) Color Chromaticity Viewing Angle Red Green Blue White Horizontal Vertical Rx θ x =, θ Y =.57 - Ry Viewing Normal.36 - Angle Gx.35 - Gy TYP.573 TYP - Bx By.8 - Wx.33 - Wy.329 θ x θ x CR θ Y θ Y Deg. (), (5) 2 / 29 Version 2.

21 Doc No Issued Date Feb. 26, 29 Model No. N89L6 - L3 Note () Definition of Viewing Angle (θx, θy) Normal θx = θy = º θy- θy+ θx- = 9º x- θx θx+ y+ 2 o clock direction θy+ = 9º 6 o clock θy- = 9º y- x+ θx+ = 9º Note (2) Definition of Contrast Ratio (CR) The contrast ratio can be calculated by the following expression. Contrast Ratio (CR) = L63 / L L63 Luminance of gray level 63 L Luminance of gray level CR = CR () CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6). Note (3) Definition of Response Time (T R, T F ) % 9% Gray Level 63 Gray Level 63 Optical Response % Gray Level % Time T R T F ms ms 2 / 29 Version 2.

22 Doc No Issued Date Feb. 26, 29 Model No. N89L6 - L3 Note (4) Definition of Average Luminance of White (L AVE ) Measure the luminance of gray level 63 at 5 points L AVE = [L ()+ L (2)+ L (3)+ L (4)+ L (5)] / 5 L (x) is corresponding to the luminance of the point X at Figure in Note (6) Note (5) Measurement Setup The LCD module should be stabilized at given temperature for 2 minutes to avoid abrupt temperature change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting Backlight for 2 minutes in a windless room. LCD Module LCD Panel USB2 CS-T Center of the Screen 5 mm Light Shield Room (Ambient Luminance < 2 lux) 22 / 29 Version 2.

23 Doc No Issued Date Feb. 26, 29 Model No. N89L6 - L3 Note (6) Definition of White Variation (δw) Measure the luminance of gray level 63 at 5 points δw = { Maximum [L (), L (2), L (3), L (4), L (5)] / Minimum [L (), L (2), L (3), L (4), L (5)] Horizontal Line W W/4 W/2 3W/4 Vertical Line H H/4 H/2 2 3 X Test Point X= to 5 3H/4 4 5 Active Area 23 / 29 Version 2.

24 Doc No Issued Date Feb. 26, 29 Model No. N89L6 - L3 9. PRECAUTIONS 9. SYSTEM MATCHING PRECAUTIONS () Refer to the drawing. (2) To avoid wireless noise interference, please keep the antenna away from LCD control board. 9.2 HANDLING PRECAUTIONS () The module should be assembled into the system firmly by using every mounting hole. Be careful not to twist or bend the module. (2) While assembling or installing modules, it can only be in the clean area. The dust and oil may cause electrical short or damage the polarizer. (3) Use fingerstalls or soft gloves in order to keep display clean during the incoming inspection and assembly process. (4) Do not press or scratch the surface harder than a HB pencil lead on the panel because the polarizer is very soft and easily scratched. (5) If the surface of the polarizer is dirty, please clean it by some absorbent cotton or soft cloth. Do not use Ketone type materials (ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid or Methyl chloride. It might permanently damage the polarizer due to chemical reaction. (6) Wipe off water droplets or oil immediately. Staining and discoloration may occur if they left on panel for a long time. (7) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of contacting with hands, legs or clothes, it must be washed away thoroughly with soap. (8) Protect the module from static electricity, it may cause damage to the C-MOS Gate Array IC. (9) Do not disassemble the module. () Do not pull or fold the lamp wire. () Pins of I/F connector should not be touched directly with bare hands. 9.3 STORAGE PRECAUTIONS () High temperature or humidity may reduce the performance of module. Please store LCD module within the specified storage conditions. (2) It is dangerous that moisture come into or contacted the LCD module, because the moisture may damage LCD module when it is operating. (3) It may reduce the display quality if the ambient temperature is lower than ºC. For example, the response time will become slowly, and the starting voltage of lamp will be higher than the room temperature. 9.4 OPERATION PRECAUTIONS () Do not pull the I/F connector in or out while the module is operating. (2) Always follow the correct power on/off sequence when LCD module is connecting and operating. This can prevent the CMOS LSI chips from damage during latch-up. (3) The startup voltage of Backlight is approximately Volts. It may cause electrical shock while assembling with converter. Do not disassemble the module or insert anything into the Backlight unit. 9.5 OTHER PRECAUTIONS () When fixed patterns are displayed for a long time, remnant image is likely to occur. 24 / 29 Version 2.

25 Doc No Issued Date Feb. 26, 29 Model No. N89L6 - L3. PACKING. CARTON 4 LDPE 4 LDPE 4 LDPE 4 LDPE 4 LDPE 4 LDPE Figure. - Packing method 25 / 29 Version 2.

26 Doc No Issued Date Feb. 26, 29 Model No. N89L6 - L3.2 PALLET Figure. -2 Packing method 26 / 29 Version 2.

27 Doc No Issued Date Feb. 26, 29 Model No. N89L6 - L3. DEFINITION OF LABELS. CMO MODULE LABEL The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation. N89L6-L3 XXXXX (a) Model Name N89L6 - L3 (b) Revision Rev. XX, for example A,, C, C2 etc. (c) Serial ID X X X X X X X Y M D X N N N N Serial No. CMO Internal Use Year, Month, Date CMO Internal Use Revision CMO Internal Use (d) Production Location MADE IN XXXX. XXXX stands for production location. Serial ID includes the information as below (a) Manufactured Date Year ~9, for 2~29 Month ~9, A~C, for Jan. ~ Dec. Day ~9, A~Y, for st to 3 st, exclude I, O and U (b) Revision Code cover all the change (c) Serial No. Manufacturing sequence of product 27 / 29 Version 2.

28 Doc No Issued Date Feb. 26, 29 Model No. N89L6 - L3.2 CMO CARTON LABEL (a) Production location Made In XXXX. XXXX stands for production location. 28 / 29 Version 2.

29