FIOA-0800-L. Quick Start Manual for. Quick Start Manual. Quick Start Manual

Transcription

1 Notes: Quick Start Manual for FIO8L MNUL REISION If you contact us in reference to this manual, please include the following document number Name : User Manual For FIO8L Part Number : URML412 Document : UMN\FIO8L\87 Revision : 11 Rev No Doc No Date Description Rev 1 UMN\FIO8L\ First Release Rev 11 UMN\FIO8L\ FIO introduction revised Product Code: FIO8L/G Field nalog I/O Model No of nalog Inputs and Outputs oltage / Current Inputs : lack case & G: Grey case (1) Maharashtra, INDI Tel: Fax: support@renuelectronicscom Website: wwwrenuelectronicscom Maharashtra, INDI Tel: Fax: support@renuelectronicscom Website: wwwrenuelectronicscom

2 Notes: Maharashtra, INDI Tel: Fax: support@renuelectronicscom Website: wwwrenuelectronicscom (9) Maharashtra, INDI Tel: Fax: support@renuelectronicscom Website: wwwrenuelectronicscom

3 Notes: Thank you for purchasing our FIO Series product FIO8L This manual gives you a quick overview of this model Read this manual thoroughly before installing and operating the unit This document is based on information available at the time of it s publication and may not cover all the details or variations in hardware or software Renu Electronics reserve the right to update information in this publication without prior notice IMPORTNT FIO Series Products are analog I/O modules, to work with PLCs which actually take control actions It is assumed that the user is well acquainted with the PLC system being used and Windows based software usage, in general Never use FIO units to perform emergency stop applications It is advised that separate switches be used outside the PLC for NY emergency stops ny mechanical or electrical modification to this unit will void all warranties (8) Maharashtra, INDI Tel: Fax: support@renuelectronicscom Website: wwwrenuelectronicscom Maharashtra, INDI Tel: Fax: support@renuelectronicscom Website: wwwrenuelectronicscom (1)

4 Introduction Power Supply Connection: The FIO series products add analog capability to your PLC / SCD FIO 8 model has 8 analog (oltage & current) inputs It has one (2 Wire RS485) communication port The COM port is used to connect any modbus master device (PLC / SCD / Operator Interface device) This module supports Modbus RTU (Slave) protocol DC DC 24DC / 1% Dimensional Details: ERTH Following sketch shows dimensional details of FIO with the DIN rail slider Input Connection: Current Mode connections oltage Mode connections POWER COMM 4 to 2 m F to IN1 1 m m m m m m m m IN2 IN3 IN4 IN5 IN6 IN7 IN8 IN1 IN2 IN3 IN4 IN5 IN6 IN7 IN8 I O 8 L IN1 IN2 IN3 IN4 IN5 IN6 IN7 IN8 IN1 IN2 IN3 IN4 IN5 IN6 IN7 IN8 F I O 8 L POWER COMM DC DC DC DC Maharashtra, INDI Tel: Fax: support@renuelectronicscom Website: wwwrenuelectronicscom (2) Maharashtra, INDI Tel: Fax: support@renuelectronicscom Website: wwwrenuelectronicscom (7)

5 DC DC M S T E R PLC Communication The unit supports Modbus RTU (Slave) protocol Dedicated Modbus registers are used for tracking analog oltage and Current inputs Unit scans all the inputs continuously and stores this information into Input register The communication parameters, unit address and operational modes (oltage / current) are set by DIP switch Specifications: Multidropping connection: FIO FIODUnit Unit 1 1 M S T E R 1 Power Supply : 24 DC / 1% 2 nalog Inputs : 8 oltage and current inputs (Input range: to 1 and 4 to 2 m) 3 Communication Port : 2 Wire RS485 4 I/O Terminals : Pluggable terminals 5 Operating Temperature : O C to 6 O C 6 Storage Temperature : 2 O C to 8 O C 7 Humidity : 1% to 9% (Non condensing) 8 Mounting : DIN rail mounting 9 Dimensions (DIN rail) : 7 X 1 X 35 mm FIO FIODUnit Unit 2 2 Communication Parameters nd Modbus Tag Definition Unit supports MODUS driver for communication with Master device FIOD FIO Unit n Comm Port Settings: COMM PORT SETTING DDR5 DDR4 DDR3 DDR2 DDR1 DDR6 UD1 UD2 PRITY1 PRITY2 Note: Where n is up to 32 Connecting repeater can increase it to 64 ON SD (6) Maharashtra, INDI Tel: Fax: support@renuelectronicscom Website: wwwrenuelectronicscom Maharashtra, INDI Tel: Fax: support@renuelectronicscom Website: wwwrenuelectronicscom (3)

6 UNIT ID DDR6 DDR5 DDR4 DDR3 DDR2 DDR UD RTE UD2 UD PRITY PRITY2 PRITY1 The following dedicated modbus registers assigned to analog inputs: nalog Inputs MODUS Tag INPUT 1 41 INPUT 2 42 INPUT 3 43 INPUT 4 44 INPUT 5 45 INPUT 6 46 INPUT 7 47 INPUT 8 48 The oltage/current value shown in the Modbus registers in unsigned integer format Port Details: (2 wire RS485) NONE POWER Mode Settings: ODD 1 EEN 1 MODE SELECTION CH3 CH4 CH5 CH6 CH2 CH7 CH1 CH8 IN1 IN2 IN3 IN4 IN5 IN6 IN7 F I O 8 L COMM DC DC 12Ω ON SD IN8 DC DC OFF ON oltage Current For using internal termination resistor (12 Ohm), short and Maharashtra, INDI Tel: Fax: support@renuelectronicscom Website: wwwrenuelectronicscom (4) Maharashtra, INDI Tel: Fax: support@renuelectronicscom Website: wwwrenuelectronicscom (5)