USB 2.0 Compatible Micro Connectors DX4 Series

Transcription

1 COMPONENTS PRODUCT INFORMATION NEW USB 2.0 Compatible Micro Connectors DX4 Series CONNECTOR MB vember 2012 RoHS Compliant On-board Type Mid-mount Type The DX4 Series is a set of connectors compatible with the Micro-USB type USB 2.0 for small devices standardized by the USB Implementers Forum, Inc. Features Compatible with Universal Serial Bus Micro-USB Cables and Connectors Specification, Revision Connector type: USB 2.0 compatible, Micro types Au plating over Pd over Ni is used for mating cycle durability and long product life. Superior rigidity with high-strength stainless steel shell. Available in a variety of versions to suit diverse device configurations. Two-piece shell structure for mid-mount type to prevent contact failure due to flux scattering during reflow. Available in reinforced type, with reinforcement plate set in mating area to prevent damage from plug caused by misaligned mating. (Refer to drawing below) Mating Area Reinforced Type *In the above drawing the shell is transparent for illustration purposes to show the reinforcement plate. Reinforcement plate of mating area General Specifications. of Contacts: 5 positions Contact Resistance: 30m ohm max. (initial) Dielectric Withstanding Voltage: AC500Vrms per minute Insulation Resistance: 1000M ohm (initial) Rated Current: 1.8A (Vbus, GND) Others DC0.5A Rated Voltage: AC30Vrms Durability: 10,000 mating cycles Operating temperature: -30 Deg. C to +80 Deg. C 1/10

2 Materials and Finishes Component Insulator Contact Shell Ordering Information Material and Finish Synthetic Resin Copper alloy / Contact area: Au plating over Pd over Ni Terminal area: Au flash plating over Ni Stainless Steel / Sn plating over Ni *For more information please refer to individual product drawings. Series DX4: USB2.0 Micro R: Receptacle Modification Code #1. of Contacts: 5 pos. DX4 R 0 05 J J 2 R1800 Reel: 1800 pcs. / reel Modification Code: #2 Plating Specification J: Contact area: Au plating over Pd over Ni Board Connection Type (Shell area) J: Through-hole type, H: Hold-down type Micro-USB Connector Type Part Number SJ Drawing Specification Mounting Type Mating Taper Mating Area Reinforcement Plate Type B DX4R005JJ2 (Individual Unit) DX4R005JJ2R1800 (Reel Unit) SJ SJ JACS DX4R005HJ5 (Individual Unit) SJ JACS- DX4R005HJ5R2000 (Reel Unit) SJ DX4R005JJ6 (Individual Unit) SJ JACS- DX4R005JJ6R1500 (Reel Unit) SJ DX4R005JJ7 (Individual Unit) SJ JACS- DX4R005JJ7R1500 (Reel Unit) SJ DX4RN05JJ2 (Individual Unit) SJ JACS- DX4RN05JJ2R2000 (Reel Unit) SJ Onboard Midmount Standard (Standard Type) DX4RN05JJ3 (Individual Unit) SJ JACS- DX4RN05JJ3R2000 (Reel Unit) SJ Type AB DX4R105JJC (Individual Unit) DX4R105JJCR1800 (Reel Unit) SJ SJ JACS DX4R205JJA (Individual Unit) SJ JACS- DX4R205JJAR1800 (Reel Unit) SJ DX4R305JJB (Individual Unit) SJ JACS- DX4R305JJBR1800 (Reel Unit) SJ DX4R205JJ8 (Individual Unit) SJ JACS- DX4R205JJ8R2000 (Reel Unit) SJ DX4R205JJ9 (Individual Unit) SJ JACS- DX4R205JJ9R2000 (Reel Unit) SJ Onboard Midmount Reverse Standard (Mating Area Reinforced Type) te: Please place orders in reel units. 2/10

3 Standard Type (Micro-B): DX4R005JJ2 3/10

4 Standard Type (Micro-B): DX4R005HJ5 4/10

5 Standard Type (Micro-B): DX4R005JJ6 Type without mating area taper (DX4R005JJ7) *Design is same as DX4R005JJ6 except the mating area taper. 5/10

6 Mating Area Reinforced Type (Micro-B): DX4RN05JJ2 Type without mating area taper (DX4RN05JJ3) *Design is same as DX4RN05JJ2 except the mating area taper. 6/10

7 Mating Area Reinforced Type (Micro-B): DX4R105JJC 7/10

8 Mating Area Reinforced Type (Micro-AB): DX4R205JJA 8/10

9 Mating Area Reinforced Type (Micro-AB): DX4R305JJB 9/10

10 Mating Area Reinforced Type (Micro-AB): DX4R205JJ8 Type without mating area taper (DX4R205JJ9) *Design is same as DX4R205JJ8 except the mating area taper. Unit Marketing Division Aobadai Building, , Aobadai, Meguro-ku, Tokyo Phone: FAX: tice: Units shown in this brochure are made for the applications listed below. However, if the abovementioned Units are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for life-support systems, or any other specific application requiring extremely high reliability, please contact JAE for further information. Recommended applications: Computers, Office machines, Measuring devices, Telecommunication devices (Terminals, Mobile devices), AV devices, Household applications, FA devices, etc. * The specifications in this brochure are subject to change without notice. Please contact JAE for information. 10/10

11 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: JAE Electronics: DX4R205JJ8R2000 DX4R105JJCR1800 DX4R005HJ5R2000 DX4R005JJ2R1800 DX4R005JJ7R1500 DX4R205JJAR1800