SERIES MCX 50 MICRO MINIATURE CONNECTORS
|
|
|
- Nora Hawkins
- 6 years ago
- Views:
Transcription
1 SERIES MCX 50 MICRO MINIATURE CONNECTORS DESCRIPTION CONTENT PAGE HUBER+SUHNER MCX micro miniature snap-on connectors offer you an excellent blend of size, weight, durability and performance for applications such as mobile and fixed telecommunications, in GPS applications and in Test+Measurement systems for testing instruments and apparatus. They are designed for frequencies up to 6 GHz and are tested according to the international standard CECC And they meet all the high requirements that micro coaxial connectors are expected to satisfy today. Description Interface Dimensions Interface Dimensions in mm / inches Technical Data Cable Connectors Receptacles with solder End PCB Connectors MCX INTERFACE DIMENSIONS INTERFACE DIMENSIONS (MM / INCHES) Plug (male) Jack (female) Plug Jack min. max. min. max. A 3.72/.146* 3.80/.150* 3.60/ /.146 B 2.49/ / / C 0.48/ / / /.152 D 4.15/ / /.162 E 0.70/ / / /.033 F 2.80/ / / /.110 G 0.95/.037 nom. 0.95/.037 nom. H / / /.137 I 2.00/ / / /.078 K 2.80/ / / /.110 * prior to slotting Interface dimensions conformable to the Standards: International: IEC Europe: CECC IP rating (interface, mated) IP50 HUBER+SUHNER MCX 50 75
2 TECHNICAL DATA ELECTRICAL DATA CECC TEST REQUIREMENTS Impedance 50 Frequency range DC... 6 GHz Dielectric withstanding voltage (at sea level) V rms, 50 Hz (depending on cable) Working voltage (at sea level) -unmated Working voltage (at m / ft.) -unmated 170 V rms, 50 Hz (depending on cable) 42 V rms, 50 Hz (depending on cable) Insulation resistance M Contact resistance - centre contact -outercontact m 1m RF leakage (measured at 1 GHz) - connectors for flexible cables - connectors for semi-rigid cables db 70 db MECHANICAL DATA CECC REQUIREMENTS Engagement force N / 5.6 lbs Disengagement force N N / 1.8 lbs lbs Contact captivation N / 2.3 lbs Cable retention force 1) see pages Durability (matings) ) Value considers maximum load of the cables without irreversible variations of specifications. ENVIRONMENTAL DATA CECC EQUIVALENT MIL TEST CONDITIONS Temperature range 55 C C/ 67 F F Climatic category IEC! 55 / 155 / 21 Thermal shock MIL-STD-202, Method 107, Condition F High temperature endurance test MIL-STD-202, Method 108A, Condition D Moisture resistance MIL-STD-202, Method 106 Corrosion Saltspray test acc. to MIL-STD-202, Method 101, Condition B Vibration MIL-STD-202, Method 204, Condition D 76 HUBER+SUHNER MCX 50
3 MATERIAL DATA CONNECTOR PARTS MATERIAL PLATING Pin contacts brass SUCOPRO / gold Body brass SUCOPRO / SUCOPLATE R /gold Socket contacts copper-beryllium alloy SUCOPRO/gold Outer contacts -plug -jack copper-beryllium alloy brass SUCOPRO/gold / SUCOPLATE R Crimp ferrules copper / brass SUCOPRO/gold Insulators PTFE or PFA MCX 50 Other materials and platings on request. Some connectors may have a specification that differs from the above mentioned data. The products are designed and guaranteed to pass the above mentioned test procedures. Any additional or different requirement arising from specific applications or environmental conditions which is not covered by these test procedures is subject to request. HUBER+SUHNER MCX 50 77
4 CABLE CONNECTORS Straight cable plugs (male) > for semi-rigid cables, SUCOFORM and MULTIFLEX cables > cable entry soldered > centre contact soldered HUBER+SUHNER type Item no. Cable group (example) Packaging Assembly instruction 11_MCX /111_NE Y2 (EZ 47) single _MCX /111_NH Y3, Y11 (EZ 86) bulk 100 pcs _MCX /111_NE Y12 (Sucoform 141) single _MCX /111_NH Y12 (Sucoform 141) bulk 100 pcs >forflexiblecables > HUBER+SUHNER full crimp > taper sleeves see page 406 HUBER+SUHNER type Item no. Cable group (example) Packaging Assembly instruction 11_MCX /133_NH U1 (EF 178) bulk 100 pcs A 11_MCX /111_NH U1 (EF 178) bulk 100 pcs A 11_MCX /111_NE U4 (EF 316 D) single A 11_MCX /111_NH U4 (EF 316 D) bulk 100 pcs A 11_MCX /133_NH U4 (EF 316 D) bulk 100 pcs A 11_MCX /111_NE U2 (EF 316) single A 11_MCX /111_NH U2 (EF 316) bulk 100 pcs A 11_MCX /133_NH U2 (EF 316) bulk 100 pcs A Crimp insert 78 HUBER+SUHNER MCX 50
5 Right angle cable plugs (male) > for semi-rigid cables, SUCOFORM and MULTIFLEX cables > cable entry soldered > centre contact soldered MCX 50 HUBER+SUHNER type Item no. Cable group (example) Packaging Assembly instruction 16_MCX /111_NE Y2 (EZ 47) single _MCX /111_NH Y2 (EZ 47) bulk 100 pcs _MCX /111_NH Y3, Y11 (EZ 86) bulk 100 pcs _MCX /111_NH Y5, Y12 (EZ 141) bulk 100 pcs >forflexiblecables > cable entry crimp > centre contact soldered > taper sleeves see page 406 HUBER+SUHNER type Item no. Cable group (example) Packaging Assembly instruction 16_MCX /111_NH U1 (EF 178) bulk 100 pcs A 16_MCX /133_NH U1 (EF 178) bulk 100 pcs A 16_MCX /133_NE U4 (EF 316 D) single A 16_MCX /133_NH U4 (EF 316 D) bulk 100 pcs A 16_MCX /111_NH U4 (EF 316 D) bulk 100 pcs A 16_MCX /133_NE U2 (EF 316) single A 16_MCX /133_NH U2 (EF 316) bulk 100 pcs A 16_MCX /111_NH U2 (EF 316) bulk 100 pcs A Crimp insert HUBER+SUHNER MCX 50 79
6 >forflexiblecables > low profile > cable entry soldered > centre contact soldered HUBER+SUHNER type Item no. Cable group (example) Packaging Assembly instruction 16_MCX /111_NH U2 (EF 316) bulk 100 pcs Straight cable jacks (female) >forflexiblecables > HUBER+SUHNER full crimp > taper sleeves see page 406 HUBER+SUHNER type Item no. Cable group (example) Packaging Assembly instruction 21_MCX /111_NE U1 (EF 178) single A 21_MCX /111_NH U1 (EF 178) bulk 100 pcs A 21_MCX /111_NE U4 (EF 316 D) single A 21_MCX /133_NH U4 (EF 316 D) bulk 100 pcs A 21_MCX /111_NH U2 (EF 316) bulk 100 pcs A 21_MCX /133_NH U2 (EF 316) bulk 100 pcs A Crimp insert 80 HUBER+SUHNER MCX 50
7 Straight bulkhead cable jacks (female) > for semi-rigid cables, SUCOFORM and MULTIFLEX cables > cable entry soldered > centre contact soldered MCX 50 Fig. 1 Fig. 2 HUBER+SUHNER type Item no. Cable group (example) Packaging Assembly instruction/ Mounting hole 24_MCX /111_NE Y2 (EZ 47) single 3100 / ML _MCX /111_NE U Y3, Y11 (EZ 86) single 3100 / ML 11 2 U centre contact NOT captivated Fig. >forflexiblecables > HUBER+SUHNER full crimp > taper sleeves see page 406 HUBER+SUHNER type Item no. Cable group (example) Packaging Assembly instruction/ Mounting hole 24_MCX /111_NH U1 (EF 178) bulk 100 pcs / ML 11 1A 24_MCX /133_NH U1 (EF 178) bulk 100 pcs / ML 11 1A 24_MCX /111_NH U4 (EF 316 D) bulk 100 pcs / ML 11 1A 24_MCX /111_NH U2 (EF 316) bulk 100 pcs / ML 11 1A Crimp insert HUBER+SUHNER MCX 50 81
8 RECEPTACLES WITH SOLDER END Receptacles, jacks (female) > bulkhead mounted > front mounting Fig. 1 Fig. 2 (press-in) HUBER+SUHNER type Item no. Packaging Mounting hole Fig. 22_MCX /111_NE single ML _MCX /111_NH bulk 100 pcs. ML _MCX /133_NE single ML _MCX /133_NH bulk 100 pcs. ML _MCX /111_NH bulk 100 pcs. ML _MCX /133_NH bulk 100 pcs. ML PCB CONNECTORS Straight PCB plugs (male) >withstand-off >2.54mm/.100 in. grid Fig. 1 Fig. 2 HUBER+SUHNER type Item no. Packaging Mounting hole Fig. 81_MCX /111_NE single ML _MCX /111_NH bulk 100 pcs. ML _MCX /111_NH bulk 100 pcs. ML HUBER+SUHNER MCX 50
9 Straight PCB jacks (female) >2.54mm/.100 in. grid MCX 50 Fig. 1 Fig. 2 HUBER+SUHNER type Item no. Packaging Mounting hole Notes Fig. 82_MCX /111_NH bulk 100 pcs. ML 15 without stand-off 1 82_MCX /111_NE single ML 15 with stand-off 2 82_MCX /111_NH bulk 100 pcs. ML 15 with stand-off 2 82_MCX /111_NM tape and reel ML 15 with stand-off 2 >1.27mm/.05 in. grid > space saving version HUBER+SUHNER type Item no. Packaging Mounting hole Notes 82_MCX /111_NE single ML 44 without stand-off 82_MCX /111_NH bulk 100 pcs. ML 44 without stand-off > surface mount type SMT HUBER+SUHNER type Item no. Packaging Mounting hole Notes 82_MCX /111_NE single ML _MCX /111_NH bulk 100 pcs. ML _MCX /111_NM tape and reel ML 120 HUBER+SUHNER MCX 50 83
10 > surface mount type SMT >edgemount HUBER+SUHNER type Item no. Packaging Mounting hole Notes 82_MCX-S /111_NE single ML _MCX-S /111_NM tape and reel ML 121 Right angle PCB jacks (female) 2.54 mm /.100 in. grid HUBER+SUHNER type Item no. Packaging Mounting hole Notes 85_MCX /111_NE single ML 15 85_MCX /111_NH bulk 100 pcs. ML 15 85_MCX /111_NM tape and reel ML 15 > surface mount type SMT HUBER+SUHNER type Item no. Packaging Mounting hole Notes 85_MCX-S /111_NH bulk 100 pcs. ML _MCX-S /111_NM tape and reel ML HUBER+SUHNER MCX 50
Cable Connectors SUHNER MCX 50 Ω. Straight Cable Plugs (male)
Cable Connectors Straight Cable Plugs (male) > for semi-rigid cables, SUCOFORM and MULTIFLEX cables > cable entry soldered Assembly Instruction 11 MCX-50-1-14 / 111 NE 23032081 Y2 (EZ 47) single SUCOPRO
Series PC 3.5 precision subminiature connectors
Series PC 3.5 precision subminiature connectors Description Content HUBER+SUHNER PC 3.5 connectors are precision connectors for use in microwave applications up to 26.5 GHz. They are especially suitable
Board-to-Board connections
Board-to-Board connections MBX/MFBX/MMBX connectors Edition 2014/08 Innovative connections Your partner for system solutions The HUBER+SUHNER Group is a leading global supplier of components and systems
SECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents SSMA Introduction... 12-4 Characteristics... 12-4 Plugs... 12-5 Receptacles...
Our Most Important Connection is with You. SECTION 3. Board-to-Board: MMBX / SMP-MAX R223 / R222M
SECTION 3 Board-to-Board: MMBX / R223 / R222M Contents MMBX Introduction... 3-4 Interface... 3-5 Characteristics... 3-6 Plugs... 3-7 PCB receptacles... 3-7 to 3-8 Adapters... 3-9 Demo board... 3-10 Panel
MCX Connectors. Alphabetical Index. Johnson Components P.O. Box 1732 Waseca, MN Fax:
MCX Connectors Alphabetical Index 133-3701-201 3 133-3701-206 3 133-3701-211 3 133-3701-216 3 133-3701-221 3 133-3701-226 3 133-3701-231 4 133-3701-236 4 133-3701-301 5 133-3701-306 5 133-3701-311 5 133-3701-316
SMA Series. Specification. Description. Applications Civil & Military Telecommunication Instrumentation SMA SMA. Interface Mating Dimensions
Series Specification 50 ohm 0-18 GHZ connectors are adaptable to interconnection requirements of both systems and components. S-Conn offers a wide variety of cable connectors, receptacles, feed thrus,
SMP. Description. Compatibility. Content. Interface dimensions (mm/inches) SMP female. Interface dimensions conformable to the following standards:
Description Compatibility HUBER+SUHNER Astrolab connectors provide a robust, proven and fully compatible plug-in solution for applications up to 40 GHz. HUBER+SUHNER Astrolab connectors have been MIL-SPEC
Cannon 50 Ohm Connectors
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
Prices, specifications, statement of warranty, and other terms and conditions are subject to change without notice by Lighthorse Technologies, Inc.
Section Index Connectors Specifications... 93 Flexible Cable... 95 Panel Mount... 99 Bulkhead... 100 PCB Mount... 101 In Series Adaptors... 103 Other Information Assembly Instructions... 176 Cable Assembly...
SMP / SMP-COM / SMP-MAX series R222
3 SMP / SMP-COM / SMP-MAX series R222 SMP-MAX INTRODUCTION BOARD TO BOARD SOLUTIONS The Best Systems Radiall s engineers work with your engineers allowing us to develop the best competitively priced misalignment
Mating Interfaces 1,63 (.064) 3,45 (.135) Ø3,71 (.146) MAX Ø6,61 (.260) MAX Ø3,71 (.146) MAX
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
SMA Connectors Series
SMA Connectors Series Content Page Description.. 2 Interface Dimensions.. 2 Interface Dimensions in mm/inches.. 2 Characteristics. 3 Cable Connectors 4 PCB Connectors 11 Panel Receptacles.. 13 Adapter
SMA - 50 Ohm Connectors
142-0701-621 4 142-0701-626 4 142-0701-631 4 142-0701-636 4 142-0701-701 7 142-0701-706 7 142-1701-011 5 142-1701-016 5 142-1701-031 4 142-1701-036 4 142-1701-041 5 142-1701-046 5 142-1701-121 5 142-1701-126
SMA - 50 Ohm Connectors
Alphabetical Index 142-0701-201 4 142-0701-206 4 142-0701-231 4 142-0701-235* 4 142-0701-236 4 142-0701-301 5 142-0701-306 5 142-0701-335* 6 142-0701-421 5 142-0701-426 5 142-0701-491 5 142-0701-496 5
SMA SERIES COAXIAL CONNECTORS
General Information Features Part Number Index Applications Coupling types and interface mating dimensions Semi-rigid conformable cable connectors Flexible cable connectors Connectors for modules Bulkhead
SECTION 1 IMP / UMP R107
1 SECTION 1 / UMP R107 Contents Introduction... 1-4 to 1-6 Characteristics...1-7 Board to board connectors...1-8 Receptacle packaging...1-9 Assembly instructions... 1-9 to 1-10 UMP Characteristics...1-11
Corona 70,000 Ft. Permeability Risetime Degradation (Mated Pair) 2.0 max MH z
NDL Ultraminiature Triaxial Connectors Connector Specifications Interface Dimensions Ø.020 Ø.082 Ø.168 Ø.162 Electrical Specifications Dielectric Center contact to intermediate contact: 1000 Vrms min Withstanding
Ganged Board to Board SMP Solutions. Catalog. belfuse.com/cinch
Ganged Board to Board SMP Solutions Catalog belfuse.com/cinch SMP CONNECTORS One of the key benefits of the SMP connector interface is its use in high frequency blind-mate applications. The design of the
Series 3402 lightning EMP protectors Gas discharge tube (GDT) technology up to 2.5 GHz
lightning EMP protectors Gas discharge tube (GDT) technology up to 2.5 GHz Description HUBER+SUHNER gas discharge tube protectors make the best of the traditional spark gap protection principle for general
Product Specification. Mezza-pede SMT Connector Low Profile 1.0mm Pitch
Mezza-pede SMT Connector Low Profile 1.0mm Pitch Rev. 1 December 7, 2016 1.0 Scope This product specification applies to 1.0mm pitch Mezza-pede SMT Connectors, designed for the mating and unmating of a
Series SMPM-T. Description. Compatibility. Content. Interface dimensions (mm/inches) SMPM-T male (pin contact), smooth bore
Series Description The is the smallest threaded open source connector on the market. Its unique and innovative combination of a MIL- STD-348 SMPM female interface connector together with a retractable
N Series Connectors Medium sized connector for high-voltage applications Suited for critical applications and environments Performance to 11 GHz (commercial) and 18 GHz (hi frequency) Intermateable with
N Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount Bulkhead In Series Adaptors...
Section Index Connectors Specifications... 137 Flexible Cable... 139 Semi-Rigid Cable... 145 Panel Mount... 147 Bulkhead... 148 In Series Adaptors... 149 Other Information Assembly Instructions... 176
The Custom Interconnect Leader
7-16 Series.354.276.843.811 ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage: Insulation Resistance: VSWR: Intermodulation: 50 ohms DC to 7 GHz 2,700 volts
SMA Connectors. RF Coax Connectors. Product Facts
SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes
TNC SERIES Miniature Coaxial Connectors
SERIES Miniature Coaxial Connectors FEATURES connectors, medium sized coaxial connectors with thread coupling, are designed for applications where extreme vibration is encountered.the increased rigidity
Series 3400 lightning EMP protectors Quarter-wave stub technology
Series 3400 lightning EMP protectors Quarter-wave stub technology Description HUBER+SUHNER quarter-wave lightning EMP protectors offer the best lightning protection available in the market, as they form
Connectors. High Performance to 65 GHz. Applications. PDF Volume 1. Click Here for Table of Contents Click Here for Specifications
SMP/SMPM Applications DELTA ELECTRONICS MANUFACTURING CORP. Connectors High Performance to 65 GHz PDF Volume 1 Click Here for Table of Contents Click Here for Specifications (978) 927-1060 FAX (978) 922-6430
SMP connectors. the easy connection. Products overview. Applications
Products overview PCB mount SMD mount plug and Centre pin in SMD, BGA or throughhole configurations Surface mount technology plug and Centre pin in SMD, BGA or throughhole configurations Bulkhead mount
INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE ON REQUEST
TNC Connectors Flexible Cable... 3 In-Series Adapters... 4 Specifications... 2 RF Adapter Kit Adapters... 6 N Connectors Panel Mount and In-Series Adapters... 10 Flexible Cable... 8 Specifications... 7
OSMP Microminiature Push-On Coaxial Connectors
Introduction Features Intermateable with Gilbert GPO Series Enhanced performance features Simplified ssembly etween Series dapters For OSMP etween Series dapters, see Page 438. OSMP microminiature push-on
SMA. Precision 26.5GHz Connectors
SMA Precision 26.5GHz Connectors SMA Precision Connectors SMA subminiature connectors are 50 ohm precision connectors initially designed for performance through 18GHz, however the standard interface is
SMA Series - Crimp Plug and Jack
Plug Features: SMA connectors are semi-precision, subminiature devices that provide repeatable electrical performance. These devices offer broadband performance with low reflection. These properties, along
In-Series and Between-Series Adapters SMA
Adapters SMA In-Series and Between-Series Adapters SMA If your choice of SMA Adapter is not shown in this section, please refer to the Table below to determine other possible locations. Should you not
GMS Interconnect Series Product Information
GMS Interconnect Series Product Information Microwave Products Product Features: Frequency range: DC up to 23 GHz, Force to engage/disengage: 10 ounces min./2.5 pounds max., Male connectors have full self-centering
The Custom Interconnect Leader
SC Series.337.307.040.003.085.194 MIN FLARE TO MEET GAGE TEST.276 MIN.549.781 ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage: Insulation Resistance: VSWR:
Product Performance Specification Mini Coaxial Connector
Product Performance Specification Mini Coaxial Connector 1. Scope 1.1 Content This specification covers the performance, tests and quality requirements for the Mini Coaxial connector and connector system.
SECTION 7 SMA/SMA-COM/BMA R125/R124/R128 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 7 /COM/BMA R125/R124/R128 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents BMA Introduction... 74 Characteristics... 75 Plugs... 76 Jacks... 77 to 78 Receptacles...78
Applications & Features, Type SSMP When using blind mate connectors in an application, careful consideration has to be given to choosing the right con
SSMP Push-On Connectors & Adapters THE SSMP (Sub-Sub-Miniature-Push-On) is a 1.7 mm connector, using solid dielectric interface. The connector is 70% of the size of the SMP and therefore allows even higher
EN3 SERIES WEATHERTIGHT CONNECTORS NEW PRODUCT BULLETIN 602
FEATURES & BENEFITS Sealed to IP68 NEMA 250 (6P) Patented grommet & o-ring free design Available in ribbed or winged coupling ring Cable, panel & cable to cable options Gold plated contacts standard Solder,
Type SMP Connectors Product Catalog
Type SMP Connectors Product Catalog Connectivity for SMP Connectors Table of Content Connectivity for Table of Contents PAGE Introduction....................................3-4 Specifications...................................5-8
ndl-q & ndl-t SerieS CONNECTORS
ndl-q & ndl-t SerieS CONNECTORS TRIAXIAL CONNECTORS Interface Dimensions Mechanical & Environmental Specifications (Ø.168) Temperature Rating Corrosion -65 C to + 165 C MIL-STD-202 Method 101, Test Condition
ACCESSORIES CONTENTS CABLE TERMINATORS PAGE
ACCESSORIES CONTENTS PAGE Cable Terminators... 403 Taper Sleeves... 406 Coloured Plastic Caps... 407 Fastening Screws... 407 Insulating Washers... 408 Solder Tags... 409 Component Container SUCOBOX...
Product Performance Specifications QuadraPaddle Connector
Product Performance Specifications QuadraPaddle Connector 1. Scope 1.1 Content This specification covers the performance, tests and quality requirements for the QuadraPaddle Connector and connector system.
Amphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.
Amphenol Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. FEATURES & BENEFITS Available in 2 through 4 rows - Offers maximum design flexibility Tested and qualified to
ACCESSORIES. Contents. Cable Terminators
ACCESSORIES Contents Cable Terminators Cable Feed Throughs Taper Sleeves Coloured Plastic Caps Fastening Screws Insulating Washers Solder Tags Component Container SUCOBOX Accessories for SK Connectors
AXOMACH E-16. High data rate links for faster data transmission. Microwave coaxial cables. Panel mount connector QUASI-FLEX. Cable mount connector 2
AXOMACH High data rate links for faster data transmission AXON proposes AXOMACH, a range of high data rate links composed of low loss microwave coaxial cables and different connector types: AXOMACH Micro-D
SMK Connectors. General Description. Contents (Click on any line to go to the indicated page) Test Data
SMK Connectors General Description These high-performance SMK (2.92 mm) connectors feature maximum VSWR for cable connectors of 1.15:1 from DC to 18 GHz, and 1.3:1 from 18 to 40 GHz. The maximum VSWR for
PC Board Sockets. Specifications SOCKETS. Surface Mount, Single Piece construction. Throughboard, Two Piece construction. Materials.
Sockets Contents SMT PCB Sockets Sockets For Ø0.5mm Pin Sockets For Ø0.8mm Pin Sockets For Ø1mm Pin Sockets For Ø2mm Pin Test Sockets IC Socket Strip Dual Row IC Socket Surface Mount, Single Piece construction
Product Performance Specification Mini Power Connector
Product Performance Specification Mini Power Connector 1. Scope 1.1 Content This specification covers the performance, tests and quality requirements for the Mini Power Connector and connector system.
2.92mm (SMK) Connectors
2.92mm (SMK) Connectors Catalog belfuse.com/cinch The Johnson 2.92mm Connector provides an excellent solution for demanding applications requiring high frequency transmission. Although similar to the SMA
RF & MW Connectors RF & MW Adapters RF Connectivity. RF & MW Connectors
RF & MW Connectors - 2.4 mm Connectors - 2.92 mm(k) Connectors - Hermetic Seal (0.02 Glass Bead) - SMP Connectors - BMA Connectors - High Performance End Lanch Connectors - High Performance SMA Connectors
PGA / BGA / PLCC SOCKETS
PGA / BGA / PLCC SOCKETS QUICK SELECTOR CHART PGA / BGA / PLCC PGA BGA PLCC GRID 2.54 mm INTERSTITIAL 1.27 mm 1.27 mm 1 mm SOCKETS Solder tail 156 161 165 SEE PAGE 173 Surface mount 156 161 165 166 169
Dura-ConTM Hermetic Connectors
Dura-ConTM Hermetic Connectors Standard Connectors With High Performance Hermetic Seals Catalog cinch.com Cinch Dura-Con Hermetic Connectors offers a high performance hermetic seal designed into our standard
SSL 1.1 Series. Product Data Sheet REV. 4, 2014 JUN
SSL 1.1 Series Product Data Sheet REV. 4, 2014 JUN General Specification Number of Positions Current Rating 2, 4, 6P 3A (Max) Voltage Rating Dielectric Withstand Voltage Durability Color Operating Temperature
SPRING - LOADED CONNECTORS
SPRING - LOADED CONNECTORS SPRING LOADED CONNECTORS QUICK SELECTOR CHART SPRING-LOADED CONNECTORS AND PAD CONNECTORS GRID 1.25 mm 2.54 mm SINGLE ROW SINGLE ROW DOUBLE ROW SLC CONNECTORS SEE PAGE Straight
AMPMODU* MOD I Interconnection System
Product Specification AMPMODU* MOD I Interconnection System 03 JUN 2013 Rev E All Paragraphs Revised 1. SCOPE This specification covers performance and test requirements for the AMPMODU MOD I Interconnection
PERFORMANCE SPECIFICATION ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, (BETWEEN SERIES SMA TO SERIES TNC), CLASS 2, STRAIGHT PLUG
INCH POUND MIL-PRF-55339/48B w/amendment 1 15 June 2017 SUPERSEDING MIL-PRF-55339/48B 30 April 2015 PERFORMANCE SPECIFICATION ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, (BETWEEN SERIES SMA TO SERIES
Microwave Gilbert Push-on Interconnects
Microwave Gilbert Push-on Interconnects Table of Contents Table of Contents Connect to Precision and Performance 4 Custom Designs 5 Corning Optical Communications RF LLC 6 Reference Guide 8 GPO Products
Amphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.
Amphenol Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. UHD FEATURES & BENEFITS 0.100 x 0.050 staggered grid - High density optimizes trace routing through the backplane
FISCHER MINIMAX TM SERIES
TECHNICAL SPECIFICATIONS FISCHER TM SERIES Fischer Connectors SA All rights reserved Web version 1.0-03.2016 Changes without prior notice FISCHER TM SERIES KEY FEATURES The Fischer MiniMax Series increases
RTX series EN
RTX series EN3716 10 CONTENTS RTX series Page RTX series Introduction... 10-4 Applications... 10-4 Product overview... 10-5 Technical characteristics... 10-6 & 10-7 How to order connectors... 10-8 Dimensions
REFERENCE PLANE Referenzebene
1Series RPC- 2.92 Interface Dimensions Series RPC-2.92 (code 02) D REFERENCE PLANE Referenzebene REFERENCE PLANE Referenzebene D A E B C F F C B E A MALE Stecker FEMALE Kuppler Series RPC-2.92 Male Stecker
ATP SERIES ATP Series
ATP SERIES ATP Series 87 ATP Series Overview ATP Series connectors are designed as a high-performance, cost-effective, thermoplastic solution to be used within the Marine, Heavy Equipment, Agricultural,
QSL RF Connector System
QSL RF Connector System DESCRIPTION Coaxial Cable Insulation Displacement Interface Low profile Highly reliable ruggedized interface Surface mount technology Excellent price-to-performance ratio APPLICATIONS
SPRING-LOADED CONNECTORS PAD CONNECTORS
SPRING-LOADED CONNECTORS PAD CONNECTORS GENERAL SPECIFICATIONS The values listed below are general specs applying for Preci-Dip spring-loaded connectors. Please see individual catalog page for additional
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF DVI MALE AND FEMALE CONNECTOR SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF DVI MALE AND FEMALE CONNECTOR SERIES CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 CONTENTS CLAUSE PAGE 1.0 SCOPE.. 3 2.0 APPLICABLE
DUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
VITA 67 Series. Ideal For Blind Mate Applications. Electrical, Mechanical & Environmental Specifications
VITA 67 Series Delta Electronics Manufacturing Corp. introduces 4 position (VITA 67.1) and 8 position (VITA 67.2) RF connector housings designed for 3U and 6U formats within the OpenVPX architecture. Ideal
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM. US Patent # 6,299,492 B1 2. POWER, RIGHT ANGLE EARLY 3. POWER, RIGHT ANGLE EARLY
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM US Patent # 6,299,492 B1 The HOTMATE board to board interconnection system provides a unique method of transferring hot pluggable power requirements within
PERFORMANCE SPECIFICATION SHEET CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES C (UNCABLED-RECEPTACLE, FEMALE, JAM NUT MOUNTED, HERMETIC SEAL, CLASS 2)
INCH-POUND MIL-PRF-39012/14C 10 August 2016 SUPERSEDING MIL-PRF-39012/14B 18 September 1977 PERFORMANCE SPECIFICATION SHEET CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES C (UNCABLED-RECEPTACLE, FEMALE,
N-50 N-50. Technical Data. Microminiature Coaxial Connector. Material Data. Interface Dimensions. Plug (Male) Jack (Female) Material Female.
N0 N0 Microminiature Coaxial Connector Technical Data Description KJCOMTECH N connectors are available in both 7 and 0 impedance. The highest possible frequency is 8GHz accord ing to the connector type.
triaxial CONtaCts Overview Features
triaxal CONtaCts triaxial CONtaCts Overview Smiths Connectors concentric twinax/triax contacts provide flexibility in the design of high speed data systems. The contacts, including the unique sizes 10
07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
Product Specification AMP Connector USB Consortium, Plug & Receptacle. Lead Free Version
Product Specification 108-60034 AMP Connector USB Consortium, Plug & Receptacle Lead Free Version 1. Scope: 1.1 Contents: This specification covers the requirements for product performance, test methods
PRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors terminated with 20 to
Product Specification
MCX Jack, Straight Orientation, Through-hole MCX Plug, Straight Orientation, Through-hole Other configurations available for: Vertical and right angle cable-to-board applications Through-hole, surface
Micro D Series Filtered Connectors
Micro D Series Filtered Connectors For designs that require even smaller connector packages, API s Spectrum Control brand has designed a line of filtered Micro D-Subminiature connectors. This line of connectors
2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be chosen according to applications,
07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-553/3F w/amendment 8 July 7 SUPERSEDING MIL-DTL-553/3F May 6 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, STRAIGHT-THRU, 3 thru CONTACT POSITIONS,
D-SUBMINIATURE (D-SUB) ECONOMY RANGE CONNECTORS
INPUT/OUTPUT CONNECTORS D-SUBMINIATURE (D-SUB) OVERVIEW FCI s D-Subminiature (D-Sub) connectors are part of an industry standard for applications requiring robust and reliable connectors. These proven
Construction. Mechanical data Number of Contacts 7. Electrical data Insulation resistance Contact resistance max. Environmental data.
1136 ITT - CCM Catalog 11/20/00 12:29 PM Page 59 The is a connector for MultiMediaCards. These cards have been developed as small form factor memory cards with ROM and RAM capabilities. The connector provides
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Power Connectors FEATURES AND SPECIFICATIONS Features and Benefits Positive
Electrical Test voltage (Vrms) Service sea level at m M I II
Applications Compact profile and high density connectors for all military and aeronautical purposes Standards MIL-C 38999 Series II - QPL approved NFC 93422 HE 309 VG 96912 series II PAN 6433-1 BS 9522
DT Connectors. Features. Connector
DT Connectors DEUTSCH DT Series connectors offer field proven reliability and rugged quality. The DT design strengths include optional flange mounting, multi-pin arrangements, lower cost, and design flexibility.
CABLE CONNECTOR 6100/6200/6200S/6230 SERIES. 2.54mm Pitch Flat Ribbon Cable Connector K-7
CABLE CONNECTOR 2.54mm Pitch Flat Ribbon Cable Connector 6/6/6S/62 SERIES K-7 6/6/6S/62 SERIES 2.5mm PITCH FC CONNECTOR 2.54mm Pitch FC Connector Product Line-up SERIES / FIGURE TYPE CONNECTOR STYLE TERMINATION
PRODUCT SPECIFICATION
SINGLE ROW CONNECTOR SYSTEM 1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors
Interface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Overview The ST Series interface connectors are specifically designed for use as Input/Output (I/O) connectors on portable information devices.
BMA. 1. Applications & Features, Specifications & Interface Dimensions 2. Connectors of Type BMA 3. Adapters to BMA
CONTENT BMA INTRODUCTION to CONNECTORS & ADAPTERS Page 9 7/16 Page 15 N BMA Page 45 SBX SBY Page 61 Page 85 1. Applications & Features, Specifications & Interface Dimensions 2. Connectors of Type BMA 37
IDC Assembly (depends on cable) -55/125 C. IDC Assembly (depends on cable) By ambient temperature: 20 C 1,2 A 70 C 0,9 A 100 C 0,6 A
mm Connectors Surface Mount Technology, Solderless Pressfit, IDC Electrical And Mechanical Characteristics Number of Pins Technical data Climate Category Bearing and operating temperature area Current
Advance Concept Release for. Initial Pre-Production Sampling Only. Device Bay Connector System
Advance Concept Release for Initial Pre-Production Sampling Only R Device Bay Connector System Molex Device Bay Interconnection System Simplifying PC & Peripheral Installation and Upgrades Driven by customers
SPRING - LOADED CONNECTORS
SPRING - LOADED CONNECTORS SPRING LOADED CONNECTORS Quick Selector Chart Spring-loaded connectors and Pad connectors TEL +1 32 21 0 00 2 mm 2.5 mm 3 35, 36 35, 36 Surface mount perpendicular with positioning
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
s-12-1177*1.0 SCOPE 1 of 8 D This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of
PCI-SIG ENGINEERING CHANGE NOTICE
PCI-SIG ENGINEERING CHANGE NOTICE TITLE: Host Socket Recommendations DATE: Updated June 12, 2006 (Initial release April 10, 2006) AFFECTED DOCUMENT: PCI Express Mini Card, Half-Mini Card ECR (Content of
Module P. Terminal Style. REF. 20 Crimp 22, 24 & 26 AWG Wire stripped back ROG (pin) RG0 (socket)
Module P Module H-E Width is 1 unit 10 Hypertac removable signal contacts Ø 0.60 mm contacts - For empty block, orderph Currently in development (Consult us about availability) A 2.54 22.86 Ø 1.8 22, 24
Construction. Mechanical data Number of Contacts 6, 8 or 16. Electrical data Insulation resistance Contact resistance max. Switch contact resistance
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 45 CCM04 MKII The CCM04 without card guidance is used where space is at a premium and the card guidance can be built around the connector (rather than provided
Filtered Combo D-Subminiature Connectors
Filtered Combo D-Subminiature Connectors Spectrum s line of filtered combo D-subs provide high insertion loss with tubular capacitive filtering. These connectors are available with 20 Amp power contacts,
2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series Product Specifications Rating type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be