This kit fist most TVs 32 in in. (81.28 cm cm), up to 132 (60 kg)

Transcription

1 This kit fist most TVs 32 in in. (81.28 cm cm), up to 132 (60 kg)

2

3 TV Wall Mount Parts List Part # Item Part # Item Qty. F Hardware List Part # Item Qty. Part # Item Qty. G M8X16MM O M/M5 washer H M6X12MM P M6/M8 washer I M5X12MM Q M8/M6 spacer J MX12MM R M/M5 spacer K M8X0MM L M6X35MM M M5X30MM N MX30MM 2

4 TV Wall Mount Tools Needed (not included) Safety Glasses 1 mm Wrench (or 1 mm socket wrench) 7/32 or 5.5 mm Lag Bolt Drill Bit 7/32 in or 5.5 mm Stud Finder Drill Hammer Philips Screwdriver 3

5 TV Wall Mount Assembly Tips: 1. This TV mount is designed for use on a vertical wall that is constructed with wood studs. 2. Become familiar with the instructions and all parts. 3. Make sure that all parts are in the box and in good condition.. Assemble the product on the open flat carton or a rug to protect the product and your floor. 5. Some heavy products need a second person to assist in the assembly. Do not install on sloping surface. 1. Improper installation may cause property damage and or personal injury, so the installation must be done by two qualified contractors. The manufacturer is not liable for damage or injury cause by incorrect mounting, assembly or use. 2. Never let children climb on product or play with product. 3. Do not sit or stand on product.. Do not fasten a TV that is heavier than the recommended load rating to the mount. 5. The size and weight of your TV must not exceed 31.5in in. diagonally or 132 lbs. The wall must be capable of supporting five times the weight of TV plus mount. 6. The mount allows the TV to tilt -20, Maximum extension: 23.6in/600mm, Minimum extension: 2.95in./75mm. 7. Improper handling can result in cuts and lacerations. 8. Pictures for reference only, subject to our available products.

6 TV Wall Mount Step 1 Attaching Wall Plate (A) Fits up to 2 wood stud In case the included hardware is too long, use the spacers. 2 in./610 mm OR A A E(x) F(x) E(x) Figure 1 F(x) This mount is designed to be mounted into wood studs. Included hardware is not designed to be used in hollow walls, cinder block, red brick, or metal studs. Should you want to mount your TV mount into any surface other than wood studs, Atlantic recommends that you seek the assistance of a professional installer. Using a stud finder, locate center of wood studs in your wall, then hold wall plate (A) against wall at your desired location. Next, use a pen or pencil to mark the location of where the mounting screws (E) will go into wall. Before marking, ensure that wall plate is level using bubble level (already attached to mount.) Pre-drill the marked holes using 7/32in. (5.5mm) drill bit. Using a 1mm wrench, fasten wall plate (A) to wall with screws (E) and washers (F). DO NOT MOUNT INTO DRYWALL. MUST BE BOLTED TO STUDS. See Figure 1 5

7 C B

8 TV Wall Mount Step 3 Installation of TV to Wall Bracket Figure 5 Handle Attention Figure 3 Figure Figure 6 Down Pull Down to Remove Bracket Hang TV to wall plate as shown in Figure 3. Push TV unit lightly to lock it with wall plate, see Figure. To adjust angle of your TV first loosen both adjustment handles, then angle your TV to your desired poisition. When TV is at desired angle then you can retighten both adjustment handles. See Figure 5. If you want to remove TV from bracket at a later time, pull down on both straps to release the locking mechanism, see Figure 6.. 7

9 Surge Protector Operation Instructions: OPERATION INSTRUCTIONS Plug Wall tap into Wall Receptacle Connect electrical devices to the outlets Technical Specification: Electrical Rating: 15A, 120 VAC, 60Hz, 1800 Watts Surge Lines Protected: 3-Line (L-N, L-G, N-G) UL Clamping Voltage: L-N 00V, L-G 00V, N-G 00V Surge Energy Joule Rating: 2160 Joules Maximum Spike Current: 1,000 Amps (3 Line Total) Response Time: < 1 Nanosecond Max. Spike Voltage: 6KV EMI/RFI Noise Filter: Frequecy: 150KHz~100MHz Attenuation: Up to 0dB UL Listed to U.S Standards: UL 19, UL 98A 8

10 Surge Protector Information/Functions: Each outlet pivots 90 (degrees) for your convenience. Grounded and Surge Protection LED indicators - - Green light indicates your Surge Protection is working properly. - Green light indicates your electrical wiring is properly grounded. This wall tap surge protector is designed to protect your electronic equipment from AC power surges up to a certain level. It s not a lightning arrestor, so it won t afford protection while lightning strikes to nearby power lines, house, and/or service entrance antenna s. New X3 MOV (Metal Oxide Varistor) Technology: New designed component with improved material and surge functions absorb surges. Provides common and normal mode protection from high energy spikes. Safety Shutdown Technology: Uses thermal fuses to power off your system, which protects against fire and other damage in the event of an extreme, extended over-voltage or when surge protection expires. High-Frequency Capacitor: Reduces noise interference. Surge Protected Outlets with 90 Rotating Design: Can be rotated to a different direction for easy usage with 3line surge protection Caution: Do not plug the included surge protector into a power outlet that is different from the specs called out. If you don t know or are not sure about the type of electrical power that is supplied to your home, please consult your local power company or a professional electrician. Use indoor and in dry locations. Not for use with aquariums and other water-related products. This surge protector must be plugged directly into the power source and must not be daisy chained together in serial fashion with other power strips, UPS, other surge protectors or extension chords. Risk of fire: Do not exceed electrical rating. Don t force your surge protector s plug into an outlet that isn t designed to accept a threewire grounded-type AC plug (a three-pring plug). This plug is designed to be inserted into a grounded-type outlet only. If this plug doesn t fit directly inside your outlet, do not attempt to force it in. Never attempt to take apart the plug in any way (or alter the power chord). Don t attempt to defeat the grounding feature by using a 3-to-2 prong adapter. If you have questions about grounding, consult your local power company or a qualified electrician. 9

11 HDMI Cables Information: This Kit includes 2 HDMI cables Each HDMI cable measures 9 feet (2.7 m) in length. Technical Specifications: 1. Version Supports Ethernet and 3D O.D.: 6.0mm Double molding Cleaning Spray and Cloth Instructions: The Screen Cleaning Kit in this package is comprised of 1 Bottle of Anti-Run Anti-Static Screen Cleaning Gel and 1 Cleaning Cloth 6.76 oz (200 ml) Cleaning Cloth measures 7.87 sq. in. (20 sq. cm.) Directions: This special formula is designed for cleaning any type of screen, including LCD. The gel does not run down the screen. Please shake bottle before spraying. Hold screen cleaner about 6 inches (15cm) away from the area to be cleaned. Spray screen, then use the included microfiber cloth to clean and polish. Shake or wash the cloth regularly to prevent collected dirt from making scratches. Do not spray excessive amount of cleaning gel. Caution: Keep away from children. Technical Specifications: Anti-Static Screen Cleaning Gel: IPA Free, 6.76 oz (200 ml) Cleaning Cloth: 7.87 sq. in (20 x 20 sq. cm.) First aid measures: 1. After inhalation: Supply fresh air; consult doctor in case of complaints. 2. After skin contact: Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor. 3. After eye contact: Rinse opened eye for several minutes under running water. If symptoms persist a doctor.. After swallowing: If symptoms persist consult doctor 10

12 Velcro Cables Ties Information: This kit includes 2 velcro cable ties. Use 2 included velcro cable ties to help manage your cords. Each velcro cable tie measures 8.66 in. (220 mm) Information to consumers in application of EU WEEE Directive 96/2002 This product is subject to European Union regulations that promote the re-use and recycling of used electical and electronic equipment. This product required the extraction and use of natural resources and may contain hazardous substances. The symbol above, on the product or on its packaging, indicuates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose your waste equipment by handling it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service, or the store from which you purchased the product. For more information about Atlantic products, please visit us at Product Warranty: Atlantic Inc., warrants to the original purchaser that its products are free from defect in materials and workmanship. If after inspection, we find that the product was defective in materials or workmanship we shall repair or replace the product at our discretion. This warranty does not cover accidental damage, misuse, improper care or alteration and excludes claims for incidental or conswqunetial loss. This limited warranty applies to product purchased in the U.S. and Canada. This warranty gives you specific legal rights and you may also have other rights which vary from State to State. This warranty duration will last one year from date of purchase U.S. and other foreign patents pending / Patentes de los EUA y países extranjeros en trámite / Brevets en cours pour les États-Unis et autres pays / U.S. und andere ausländische Patente sind hängig All rights reserved / Derechos Reservados / Tous droits réservés Made in China / Hecho en China / Fabriqué en Chine R #