ACCU-OPM101H. Handheld power meter. Description. Key Features. Specifications. 24/7 S

Transcription

1 ACCU-OPM101 Handheld power meter ACCU-OPM101 is a standard handheld power meter used for fiber network installation & maintenance. It has robust housing, integrated rubber protection, endurable rubber buttons, controllable LCD backlight, these features are specifically designed for filed operations. Highly accurate unit offering wide range wavelength Muti-connectors,muti-switching unit >240 successive working hours with 3 x 1.5V AAA batteries 360 degrees Integrated rubber protection Endurable rubber buttons Muti-point calibration, accurate full-range test Ergonomic, eye-catching handheld package Auto-OFF power saving function ACCU-OPM101L ACCU-OPM101H Wavelength(nm) 800~1700nm Detector InGaAs Measurement Range (dbm) -70~+6-50~+26 Uncertainty ±5% Calibrated Wavelength(nm) 850,1300,1310,1490,1550,1625 Resolution(dB) 0.01 Optical Connector FC(interchangeable SC,ST) / 2.5mm universal connector Power Supply Alkaline Battery(3 AA 1.5V batteries) Battery Operating Time 240 h with 1.5V Battery(3) Operating Temperature( ) -10 ~ +60 Storage Temperature( ) -25 ~ +70 Relative Humidity 0 to 95% (non-condensing) Dimension(mm) 200 X90 X50 Weight(g) 285

2 ACCU-OPM101A Handheld power meter ACCU-OPM101A full featured handheld power meter. working together with OLS201A optical light source, it can realize auto identification of wavelength & frequency. Specially selected large-area detector improves the accuracy & repeatability of the test,particularly MM fiber. It has additional features of data saving & uploading. Large-area detector, improved accuracy & repeatability Auto wavelength & frequency identification and switching ; Data saving, up to 1000 test records; USB port communication Reference power level can be set up and stored; Auto-off function can be activated or deactivated; AAA battery /AC adapter power supply; Low battery indication 360 degrees Integrated rubber protection Endurable rubber buttons LCD backlight control Type ACCU-OPM101A-L ACCU-OPM101A-H Calibrated(nm) 850,1300,1310,1490,1550,1625nm Detector type InGaAs Measurement Range(dBm) -70~+6-50~+26 Detector Area Ø 1.0mm Uncertainty (db) ±0.15(3.5%) linearity (db) ±0.02 Display resolution(db) 0.01 Frequency ID(Hz) 270,330,1K,2K Wave ID(nm) 1310,1490,1550,1625, 850,1300 Date storage capacity 1000 Communication Port USB Optical Connector type FC,SC,ST interchangeable(lc can be required ) Alkaline battery 3XAA,1.5V Power Supply Adaptor(V) 8.4 Battery Operating time (h) 200 Operation Temperature( ) -10~+60 Storage Temperature( ) -25~+70 Size(mm)& Weight 200 X90 X50 / 285(g)

3 ACCU-101B Mini Blue-tooth power meter ACCU-OPM180B Bluetooth smart power meter is our latest product which can realize Bluetooth communication with smart phone by App. With this function operators can remote control the power meter, such as data uploading, interactive operation between the 2 devices. In addition, it is the smallest power meter in the world, designed for one-hand operation. Quality metal hosing with full around integrated rubber protection makes it stronger than ever in the filed. Bluetooth communication with smart phone Smallest power meter in the world, designed for one-hand operation Auto-calibration function Highlight OLED display, no interference by nature light Quality metal housing,integrated rubber protection 101BH 101BL Wavelength range(nm) 800~1625 Calibration wavelength(nm) 850/1300/1310/1490/1550/1625 Detector type InGaAs Measurement range(dbm) -70~+3-50~+26 Uncertainty ±0.15dB Display resolution Linearity:0.1%; logarithm 0.01dBm Operation temperature( ) -10~+60 Storage temperature( ) -25~+70 Auto-off time(min) 10 Battery operation time(h) 70 Communication method Bluetooth Power Supply Li-Battery(built-in) Weight(g) 200 Size(mm) ф62 high 20mm

4 ACCU-OPM nm power meter ACCU-OPM650 power meter is designed to test 650nm wavelength, it uses 10mm area silicon detector, and ADVANTEST 8250A as reference. Therefore it is highly accurate, suitable for plastic fiber test & light source manufacturing Fest & scientific researches. Professional large area SI (Silicon) detector High standard meter calibration Handheld and easy to operate; 360 degrees Integrated rubber protection Endurable rubber buttons Bb Wavelength(nm) 400~1100nm Detector Si (10mm) Measurement Range (dbm) -50~+10 Uncertainty ±5% Calibrated Wavelength(nm) 650 Resolution(dB) 0.01 Optical Connector FC Power Supply Alkaline Battery(3 AA 1.5V batteries) Battery Operating Time 240 h with 1.5V Battery(3) Operating Temperature( ) -10 ~ +60 Storage Temperature( ) -25 ~ +70 Relative Humidity 0 to 95% (non-condensing) Dimension(mm) 200 X90 X50 Weight(g) 285

5 ACCU-PON106 PON power meter ACCU-PON106 is applied for FTTx application and maintenance. It is able to simultaneously test and estimate the signals, voice, data & video. It is a professional instrument for PON projects. Simultaneously test on EPON/GPON/GEPON with three wavelengths (1490nm, 1550nm,1310nm ) Used in Burst mode measurement of 1310nm upstream Easy threshold setting, set threshold on tester USB port communication with PC Offering up to 10 different threshold setting in total User self calibration can be retrieved by computer through software. 360 degrees Integrated rubber protection Handheld and easy to operate; Endurable rubber buttons Power saving function Model ACCU-PON nm 1490nm 1550nm Pass Zone(nm) 1260~ ~ ~1570 Isolation (db) >40@1490 >30@1310 >40@1310 Isolation(dB) >40@1550 >40@1559 >40@1490 Measurement Range(dBm) -40~+10-40~+10-40~+20 Measurement Accuracy Connatural uncertainty(db) ±0.5 Linearity(dB) ±0.1 Passing through insertion Loss(dB) <1.5 General Information Detector Type InGaAs Optical Connector FC/SC Interchangeable Fiber Type 9/125um Display LCD:128*64 Measurement Unit db/dbm/xw Resolution (db) 0.01 Power Supply 3 AA1.5V battery Operation Temperature( ) -10~60 Storage temperature( ) -25~70 Dimension(mm) 200 X90 X50 Weight(g) 285

6 ACCU-OLS201 Optical light source ACCU-OLS201 is a standard handheld light source, It has accurate output center wavelength,and stable output power, working together with power meter it can accurately test the db loss in fiber joint. It provides up to 5 wavelength, ( such as 850/1300/1310/1490/1550nm). Custom made wavelength combination is available. Custom made combination of 2~5 output wavelengths CW, 2Hz modulation output at 650nm, and CW, 270Hz,1KHz,2KHz modulation output at other wavelengths High stability of the output power Small deviations of center wavelength Backlight LCD supports night operation Handheld and easy to operate 360 degrees Integrated rubber protection Endurable rubber buttons Type Wavelengths(nm) Emitter Type Typical Output Power (dbm) Spectral Width(nm) Output Stability Modulation Frequencies Optical Connector Power Supply 1310/1550 or 850/1300 ACCU-OLS /1310/ /1300/1310/ /1300/1310/1490/1550 FP-LD,LED or others please specify -7dBm for LD, -20dBm for LED 10 ±0.05dB/15mins; ±0.1dB/ 8hours CW,270Hz,1KHz,2KHz FC/PC(or FC/SC/ST interchangeable connectors) Alkaline Battery(3 AA 1.5V batteries) Battery Operating Time(hour) 45 Operating Temperature( ) -10~+60 Storage Temperature( ) -25~+70 Dimension(mm) 200 X90 X50 Weight (g) 285

7 ACCU-OLS201A Optical light source ACCU-OLS201A Optical Light Source is designed work together with ACCU-OPM101A,this combination realizes auto wavelength & frequency identification with this function operator is able to avoid frequent matching test of wavelength, reduce mis-operation and improve test efficiency Max 5 wavelength auto wavelength & frequency identification Tone generation, 270HZ,330HZ,1KHZ,2KHZ; AAA battery and AC adapter power supply; Low battery indication. 360 degrees Integrated rubber protection Handheld and easy to operate; Endurable rubber buttons Type ACCU-OLS201A Operating wavelength(nm) 1310/1550 (others specify on requests, Max wavelength is 5) Applicable fiber Laser type Maximum Output Power(dBm) Adjustable step size(dbm) SM,MM FP-LD(others specify on requests) -5(can be adjustable, others specify) <0.5 (adjustable between -5~-12dBm) Stability(dB,15min,20 ) ±0.1 Stability(dB,30min,20 ) ±0.05 Modulation(Hz) Fiber Port Alkaline Battery CW, 270,330,1K,2K FC/PC or FC,SC,ST interchangeable 3XAA,1.5V Power Supply Adaptor(V) 8.4 Battery Operating time(h) 45 Operation Temperature( ) Storage Temperature( ) Outline size(mm) -10~+60-25~ X90 X50 Weight(g) 285

8 ACCU-OMT105 Optical muti-tester ACCU-OMT105 is an integrated muti-tester with built-in power meter, light source and visual fault locator. It is an indispensable instrument for FTTH projects. OPM/OLS/VFL built-in-one tester OPM Auto ID wavelength & frequency of the built in OLS OLS Frequency:270Hz,1000Hz,2000Hz Data Saving, up to 1000 records 360 degrees Integrated rubber protection Handheld and easy to operate; Endurable rubber buttons Type ACCU-OMT105 Optical Power Meter Module Detector Type InGaAs Measurement Range(dBm) -70~+6-50~+26 Uncertainty 5% Calibrated wavelengths(nm) 850,1300,1310,1490,1550,1625 Resolution(dB) 0.01 Optical Connector FC/SC/2.5mm universal, for LC we provide FC-LC Hybrid adaptor Optical Light Source Module Emitter Type FP-LD Wavelengths(nm) 1310/ /1300 Ouput Power(dBm) -7 Spectral Width 10nm Output Stability ±0.05dB/15mins; ±0.1dB/ 8hours Optical Connector FC/ SC, for LC we provide FC-LC Hybrid adaptor Visual Fault Locator Wavelength(nm) 650±10 Ouppower(mW) 1 10 General of Multi Tester Power Supply Alkaline Battery(3 AA 1.5V batteries) Auto-off time 10mins Operating Temperature( ) -10~+60 Storage Temperature( ) -25~+70 Dimension(mm) 200 X90 X50

9 24/7 S ACCU-OMT105A Optical muti-tester ACCU-OMT105A is an integrated muti tester with built-in light source with 4 wavelengths(sm 1310/1550nm, MM 850/1300nm) and power meter. It is an ideal instrument for project installation & maintenance. OPM/OLS(4 wavelength) built-in-one tester OPM Auto ID wavelength & frequency of the built in OLS OLS Frequency:270Hz,1000Hz,2000Hz Data saving, up to 1000 records 360 degrees Integrated rubber protection Handheld and easy to operate Endurable rubber buttons Type ACCU-OMT105A Optical Power Meter Module Detector Type InGaAs Measurement Range(dBm) -70~+6-50~+26 Uncertainty 5% Calibrated wavelengths(nm) 850,1300,1310,1490,1550,1625 Resolution(dB) 0.01 Optical Connector FC/SC/2.5mm universal, for LC we provide FC-LC Hybrid adaptor Optical Light Source Module Emitter Type FP-LD Wavelengths(nm) 850/1300/1310/1550 Ouput Power(dBm) -7 Spectral Width 10nm Output Stability ±0.05dB/15mins; ±0.1dB/ 8hours Optical Connector FC/ SC, for LC we provide FC-LC Hybrid adaptor General of Multi Tester Power Supply Alkaline Battery(3 AA 1.5V batteries) Auto-off time 10mins Operating Temperature( ) -10~+60 Storage Temperature( ) -25~+70 Dimension(mm) 200 X90 X50

10 ACCU-VFL301 Optical Visual Fault Locator ACCU-VFL301 pen red light source, which is portable, endurable and reliable,suitable for short -distance tracking & fiber matching at station. It is specifically designed for FTTH installation & maintenance. Integrated hard metal housing Low battery indication Constant stable output power ESD protection design, Protect the LD effectively Replaceable ceramic tube Unique dust cap design,reducing the risk of pulling off Large battery capacity, up to 60 Type ACCU-VFL301 Central Wavelength Emitter Type 650nm±10nm (635nm can be required on request) FP-LD Output Power (mw) 1 or 10,up to 50 Optical Connector 2.5mm universal connector For 1.25mm connectors, FC (Male)-LC (Female) convertor can be optional on customer s requests Operating Model Pulse Frequency Power Supply Battery Operating Time Both CW and Pulse available 2~3Hz 2 AAA battery batteries 650nm@1mw 65hours 650nm@10mw 15hours Test with Panasonic LR6 AAA BATTERY battery Operating Temperature ( ) -10~+45 Storage Temperature( ) -40~+70 Dimension (mm) 15X180 Weight(g) 120(Without battery)

11 ACCU-OFI401 Optial fiber identifier ACCU-OFI401 Optical Fiber Identifier is able to detect & display light transmission direction and the relative power value without interrupting on-going signals. PS, it can show the frequency of light signal. ONE KEY-easy operation Quick ID light transmission direction, frequency & relative power value 4 exchangeable metal adaptor,more accurate for targeted tests Unique adaptor box design Hard integrated metal housing Unique screen hood design, avoiding interference from natural light. Low power indication. Type ACCU-OFI401 Identified Wavelength Range nm Identified Signal Type CW, 270Hz±5%,1kHz±5%,2kHz±5% Detector Type Ø1mm InGaAs 2pcs Adapter Type Ø0.25, Ø0.9, Ø2.0, Ø3.0 Signal Direction Left & Right LED Singal Direction Test Range -46~10(1310nm) (dbm, CW/0.9mm bare fiber) -50~10(1550nm) Signal Power Test Range -50~+10 Signal Frequency Display (Hz) 270, 1k, 2k Frequency Test Range (dbm, Average Value) Ø0.9, Ø2.0, Ø3.0-30~0 (270Hz,1KHz) -25~0 (2KHz) -25~0 (1KHz,2KHz) -20~0 (2KHz) Ø0.25 Insertion Loss(dB, Typical Value) 0.8 (1310nm) 2.5 (1550nm) Alkaline Battery(V) 2pcs AAA batteries Operating Temperature( ) Storage Temperature( ) Dimension (mm) 196X30.5X27 Weight (g) 195

12 ACCU-OFI401H Optical fiber identifier ACCU-OFI401H optical fiber identifier is specifically designed for high power signals, normally applied for CWDM, DWDM, amplified optical signals, Raman Amplified, as well as pump laser source with EDFA. High power reach +24dBm, low power reach -30dBm. ONE KEY easy operation; exchangeable adaptors; Efficiently identify light transmission direction & frequency tone (270Hz, 1KHz, 2KHz) with audible warning; Higher than +24dBm, display HI warning, lower than -30dBm display LO warning, adaptor Ø2.0, Ø3.0 Hard integrated metal housing Low power indication. Unique screen hood design, avoiding interference from natural light. Unique adaptor box design Type ACCU-OFI401H Identified Wavelength Range nm Identified Signal Type CW, 270Hz±5%,1kHz±5%,2kHz±5% Detector Type Ø1mm InGaAs 2pcs Adapter Type Ø0.25, Ø0.9, Ø2.0, Ø3.0 Signal Direction Left & Right LED Singe Direction Test Range Ø2.0, Ø3.0-30~+24(1550nm) Signal Frequency Display (Hz) 270, 1k, 2k Frequency Test Range Ø2.0, Ø3.0-10~20 (270Hz,1KHz) -5~20 (2KHz) Insertion Loss(dB, Typical Value) 2.5 (1550nm) Ø2.0, Ø3.0 Alkaline Battery(V) 2pcs AAA batteries Operating Temperature( ) Storage Temperature( ) Dimension (mm) 196X30.5X27 Weight (g) 250

13 ACCU-FR501 Optical fiber ranger ACCU-FR501 optical fiber ranger is very practical in fiber network installation & maintenance. It can quickly locate the failure and measure the distance. It has powerful analysis software, simple ONE KEY operation and user-friendly interface. Compact, durable, easy to operate Quick analysis,simple test display Test up to 8 event points Automatic Pulse Width setting Live fiber detection Blind spot & unconnected fiber notification OTDR connector for the fiber ranger port. Built-in visual fault locator (VFL) Long battery life, up to 5000 measurements Data saving, up to 1000 test records USB communication/test record downloading High-end optical interface provides accurate test & better repeatability Type ACCU-FR501 Operating Wavelength 1550nm(1310nm Optional) Fiber Type 9/125um SM Fiber Optical Connector Type FC/PC Detector Type InGaAs Peak Power of laser(mw) 60 Max. Displaying Reflection Event(km) 60 ( 1dB) Distance Non-reflection Event(km) 20 ( 2.5dB) Measurement Unit M Reflection Event Dead Zone 15m Distance Accuracy(Reflection Event) ±(2m+2*10(-4)X Distance) Wavelength of VFL Option(nm) 650 Output Power of VFL Option(mW) >=1 Date storage capacity 1000 Communication Port USB Power Supply Alkaline Battery (3pcs AA 4.5V Batteries) Battery Operating Time 5000 measurements Working Temperature( ) -5~40 Storage Temperature( ) -10~60 Humidity 0~85%(Non-condensation) Dimensions(mm) 200 X90 X50 Weight(g) 320

14 ACCU-OTS601 Optical Talk Set ACCU-OTS601 optical talk set combines digital optical phone and light source functions in one instrument. It is widely used in fiber network installation & maintenance, fiber attenuation value testing in data network, CATV and Telecommunication networks Full-duplex digital communication with high quality connection and low background noise Working together with Optical Clip-on Coupler, enables on line communication available Combining functions of both digital optical phone call and light source. Large LCD display with backlight Low battery power indication Laser source modulation : 270Hz,330Hz,1KHz,2KHz Type ACCU-OTS601 Wavelength(nm) 1310(A)/1550(B) Fiber type SM Dynamic range(db) 45 Distance(km) 120 Laser Device type FP-LD Output adjustment (db) 1 Output power(dbm) -5~-15 Output stability(db,30min,20 ) 1 <0.05 Modulation CW,270Hz,330Hz,1KHz,2KHz Connector type FC/PC Battery 3*AA,1.5V Battery operation time(h) 2 30(Talk set function)50(laser source function) Work temperature( ) -10~+60 Storage temperature ( ) -25~+70 Dimension(mm) Weight(g) 225

15 ACCU-OTDR801P Handheld OTDR (30/28dB,1310/1550nm) ACCU-OTDR801P provides accurate measurement of cable length, loss, and connection quality, etc.; it can realize the accurate positioning of event points and fault points.it is widely used in the installation, maintenance testing and emergency repair of fiber optic networks. Highly accurate, endurable, reliable One-key analysis Touch screen + endurable rubber buttons Simple interface and intuitive operation Rugged integrated rubber protection Large capacity of lithium battery (more than 10 successive working hours ) Model ACCU-OTDR801P Type of optical fiber Single mode Center wavelength 1310nm/1550nm ±20nm Maximum dynamic range (db) 1 30/28 Event blind zone 2 1.5m Attenuation blind zone 10m Display type 3.5inch, color LCD, touch screen operation Optical interface FC/UPC (Interchangeable SC, ST) Test range (db) 500m,1km,2km,4km,8km,16km,32km,64km,128km Pulse width 10,30,50,100,275,500,1000,5000,10000ns Range accuracy ± (1m + sampling interval % distance) Attenuation measurement accuracy ±0.05 db/db Reflection measurement accuracy ±4dB Data storage 1000 test curves Communication interface USB VFL Output power 2mW Test distance 5 km Environmental adaptability Power supply mode AC / DC adapter: AC: 100V ~ 240V (1.5A), 50/60Hz DC: 18V to 20V (2A) Battery operation time 3 10hours Operating temperature -5 ~ 50 Storage temperature -20 ~ 70 Relative humidity 0 ~ 95%, no condensation Weight 0.9KG Volume 208mm 110mm 56mm

16 ACCU-OTDR801N OTDR ( 1310/1550/1625nm, 40/38/38dB) ACCU-OTDR801N is the new generation of intelligent OTDR. Outstanding quality, excellent performance, it is widely used for installation, maintenance of fiber optic networks. Integrated design,smart and rugged. Small and light,easy to carry. 1625nm online detection module with filter is available as a option for a online FTTx/PON detection. Multi-measuring mode, simple to use, finish measurement by just one button. Real-time measuring function, convenient to monitor the splicing process. Internal large power visual laser source for accurate positioning the closer fault point. Internal -5dBm stable laser source. Optical power meter function is offered as a option. Warnning function could prevent module of OTDR damaged by optical signal. Integrated with 2 main USB and one sub USB port, for controlling by PC or connect external instrument. Integrated with Screenshot function, PC Remote access and control function is available via RJ45 interface or optional WIFI module. Support multi-language display and input,friendly interface,visual keyboard capable. Integrated with 4G internal memory. Storage more than groups curve. Provide data simulation software to process, generate and print report. Battery indicator function. Pulse width 3ns, 5ns, 10ns, 20ns, 50ns, 100ns, 200ns, 500ns, 1μs, 2μs, 5μs, 10μs, 20μs Testing distance Dead zone test, 500m, 2km, 5km, 10km, 20km, 40km, 80km, 120km, 160km Wavelength 1310/1550/1625nm(with filter) Dynamic Range 40/38/38dB Dead Zone 1/4m Sampling resolution Minimum 0.25m Sampling point Maximum 128,000 points Linearity 0.05dB/dB Loss threshold 0.01dB Loss resolution 0.001dB Distance resolution 0.01m Distance accuracy ±(1m+measuring distance sampling resolution ) Internal visual source 10mw, CW/2Hz Stable laser source -5dBm DataStorage groups of curve Interface 1 RJ45 port,3 USB port(usb 2,Mini-USB 1) Display 7 inchtft-lcd(touch screen function is optional) Battery 7.4V/4.4Ah lithium battery(with air traffic certification),continuously work 6 hours Working Temp -10 ~+50 Storage Temp -20 ~+75 Humidity 95%(non-condensation) Dimension mm / 1.5kg(battery included) Accessories Main unit, 12V power adapter, Lithium battery, FC adapter, USB cord, User guide, CD disk, carrying Optional parts SC/ST/LC adapter, Bare fiber adapter

17 ACCU-BTOPM2101-M channel Multi-channel Bench-top power meter ACCU-BTOPM2001M is a professional customized 4-48 channel, muti-channel selectable bench top power meter. It is highly accurate, reliable, can be used in manufacturing & scientific institutions. High speed with multi channel high speed USB data uploading High sensitive & resolution Large measurement range, auto measurement range shifting Data Acquisition method, improves the signal-to-noise ratio and measurement range. Open communication protocol, user can design the software to remote control the requirement. Model No. ACCU-BTOPM2101-M channel Channel No. 4,8,12,16 channels, to be optional Calibration wavelength 850,980,1300,1310, Measurement range (nm) 850~1700 Detector type InGaAs Measurement range(dbm) +5~-75 Intrinsic Uncertainty ±3% Measurement units db/dbm/xw Displaying resolution 0.01(default) Operation temperature( ) -10~+60 Storage temperature( ) -25~+70 Power Supply(V) AC90~260(50Hz) Weight(kg) 2.5 Dimension(mm) Communication Port USB

18 ACCU-IRL3201(SM) Bench-top Insertion Loss and Return Loss Test Station ACCU-IRL3201 single mode loss test station is specifically designed for optical passive components manufacturing and Lab Test. It is used to test insertion loss and return loss. High accuracy & reliable performance Simple operation, high efficiency Replaceable connector improves test accuracy & reduces maintenance cost. Accurate analysis to wide dynamic ranger and weak signal Soft & clear display, backlight control USB Port communication Type ACCU-IRL3201(SM/MM) Optical Return Loss Test Wavelength 1310/1550nm 850/1300 (50/125 or 62.5/125) Optic Connector FC/APC Return Loss measurement Range 0 ~ 75dB Output Stability of laser source 0.05dB(1 hour@25 C) Measurement accuracy 0.25dB Resolution ±0.3dB Optical Power and Insertion Loss Test Wavelength Range 800~1700nm Calibrated wavelength 850/1300/1310/1550nm, more other wavelengths can be optional Optic Connector(Power Meter) Interchangeable FC/SC/ST/2.5mm Universal /1.25mm adaptors Photo detector InGaAs Display modes dbm/db/xw Measurement range +3 ~ -80 dbm Resolution Non-linear 0.001dB ;Linear:0.001nw/µW/mW Measurement accuracy ±5% Other Specification Communication Port USB Power Supply AC V,50~60Hz Operation Temperature -5 ~+55 Storage Temperature -25 ~+70 Dimensions 360X240X130mm Weight(kg) 2.8

19 ACCU-IRL3201(MM) Bench-top Insertion Loss and Return Loss Test Station ACCU-IRL3201(MM) multimode loss test station is specifically designed for optical passive components manufacturing and Lab Test. It is used to test insertion loss and return loss. High accuracy & reliable performance Simple operation, high efficiency Replaceable connector improves test accuracy & reduces maintenance cost. Accurate analysis to wide dynamic ranger and weak signal Soft & clear display, backlight control USB Port communication Type ACCU-IRL3201(MM) Optical Return Loss Test Wavelength 850/1300 (50/125 or 62.5/125) Optic Connector FC/APC Return Loss measurement Range 0 ~ 75dB Output Stability of laser source 0.05dB(1 hour@25 C) Measurement accuracy 0.25dB Resolution ±0.3dB Optical Power and Insertion Loss Test Wavelength Range 800~1700nm Calibrated wavelength 850/1300/1310/1550nm, more other wavelengths can be optional Optic Connector(Power Meter) Interchangeable FC/SC/ST/2.5mm Universal /1.25mm adaptors Photo detector InGaAs Display modes dbm/db/xw Measurement range +3 ~ -80 dbm Resolution Non-linear 0.001dB ;Linear:0.001nw/µW/mW Measurement accuracy ±5% Other Specification Communication Port USB Power Supply AC V,50~60Hz Operation Temperature -5 ~+55 Storage Temperature -25 ~+70 Dimensions 360X240X130mm Weight(kg) 2.8

20 OTDR Launch Cable Box OTDR launch box is designed to eliminate and reduce the influence of blind spot in the testing process Outline size(length*width*height)( mm) Box Material 260X150X70 SR Polypropylene Weight (kg) About 0.85 Typical Loss(dB) Fiber Length(km) <0.65 with 1000meters 0.5~1Km on customer requests Operating Temperature( C) -40 to +55 ACCU-FM1001F Field Fiber Microscope ACCU-FM1001F Field Fiber Microscope has 200X or 400x magnification. White LED light provides coaxial illumination to connector end-face. High-resolution display of end-face details, such as scratches, defects and contamination. Portable and easy to use Optical Connector: 2.5mm universal adapter, 1.25mm universal adapter; Eye protection design

21 High Standard Handheld Inspection Microscope The Handheld Inspection Microscope is the upgraded version of conventional microscope; It can inspect/record/file the details of fiber end face through the monitor.. One-way focus control instant detection, image display in seconds. 35 assorted tips available to test or customize. 95% tips interchangeability in-between probes. 95% Image centralization on screen. Precise resolution (<1 μm), no shadow or dark edge around screen. High revelation image and video, no noise or flash. TF card for storage the image and video Fiber Connector Cleaner (Dual-core cleaning) It can be used for SC, FC, ST, D4, LC, DIN and Bionic connectors. Cleaning tape is replaceable Cleaning Times Over 500 times per reel (dual-core) Cleaning Result(dB) -20 to -50 (Return Loss) Operating Temperature( ) -10 to +50 Weight(g) 100

22 Accuracy makes ACCU-TEST CO.,LIMITED Greatness