Solving your relay requirements since 1922
|
|
|
- George Lynch
- 6 years ago
- Views:
Transcription
1 Expected 25 C: 100,000 operations minimum at rated loads Solving your relay requirements since 1922 C Series TDR Solid state analog circuitry Delay on operate timing mode Compact size Relay output with SPST or SPDT contacts Timing selection: Fixed or knob adjustable Numerous models timing from 0.1 secs. to 300 secs. UL File #E96739 (M) CSA File #LR Timing Mode: Delay on operate timing cycle begins upon application of input power. The relay contacts transfer at the end of the delay period and will remain transferred until input voltage is removed. Reset occurs when input voltage is removed. Timing Diagram: Contact Information: Arrangement: 1 form A (SPST Normally open) - Diagram A 1 form B (SPST Normally closed) - Diagram A 1 form C (SPDT) - Diagram B Max. switching power 30W, 50VA Contact Rating (Resistive) Max. switching voltage 60V DC, 125V AC Max. switching current 1A DC, AC Max. carrying current.05a AC; 1A 30V DC UL/CSA Rating 0.5A AC; 1A 30V, DC
2 Solving your relay requirements since 1922 Environmental Information Temperature Range: Operating and storage: -25 C to +60 C, (-13 F to +140 F). Mechanical Information: Termination:.110 inch (standard),.250 inch or screw terminals (optional). Enclosure: Black plastic case. Mounting: Single screw or optional 2-screw panel mount Weight: 0.8 oz (23g) approx. Outline Dimensions: Timing Specifications: Timing - Fixed: 0.1 through 300 secs. Timing Ranges: , , , , secs. Custom timing is available. Timing Adjustment: Knob adjustable potentiometer. Timing Tolerance: Fixed Units: ±5%. Adjustable Units: -0 to +25% of maximum specified delay time. Minimum specified value or less at low end. Repeatability: ±5% Release Time: 60 ms typical, 100 ms maximum. Timing Cycle Interrupt Transfer: None. Initial Dielectric Strength: Between open contacts: 500V RMS, between contacts & coil: 500V RMS. Input Information: Voltage: AC units- 12V, 24V, and 115V DC units- 12V, 24V, 48V and 110V. 0ther voltages are available Power Requirement: AC units: 3 VA or less. DC units: 3 Watts or less. Polarity Protection: On DC units - Yes. Input Voltages & Limits:
3 Solving your relay requirements since 1922 Nominal Minimum Maximum 12V AC 10V 14V 24V AC 20V 28V 115V AC 105V 130V 12V DC 11V 14V 24V DC 20V 32V 48V DC 41V 55V 110V DC 95V 125V Wiring Diagrams: Ordering Information: Definition of a part number for the Amperite C Series Time Delay Relay. Example: A: Denotes nominal input voltage. Voltages Available: 12, 24, 115V AC; 12, 24, 48, 110V DC. Custom Voltages are available.
4 Solving your relay requirements since 1922 B: Denotes type of input current required for operation: A = AC - Alternating Current; D = DC - Direct Current. C: Denotes contact form: NO= SPST - 1 form A, C = SPST - 1 form B. SPDT = 1 form C D & E: Denotes range of knob adjustability for timing (in seconds) where: D = Minimum time delay. E = Maximum time delay for adjustable TDR'S. Note: 1.) Ranges Available: , , , , secs. Custom timing is available. 2.) Both values (D & E) can be replaced by a single value for a factory preset time delay in seconds from 0.1 through 300 secs. F: Denotes form of termination - blank =.110 male electro-plate solder terminals (standard), X =.250 male quick connect terminals (optional), S = screw terminals. G: Denotes use of solid-state analog circuitry of C Series. Solving Your Relay Requirements Since 1922
5
6 From: Frank M. Kretkowski Sent: Wednesday, November 19, :20 AM To: Subject: Fw: C-Series Technical Data Sheet with contact rating revision Hello Kevin, Please find attached a file for the C-Series Technical Data Sheet. We are in agreement that the contact rating (maximum switching current) is incorrectly specified as 0.05A AC where the correct specification should be 0.5A AC. It may be a period of time before this information is corrected on the website. I apologize for the convenience and if you need any additional assistance, please feel free to contact us. Frank M. Kretkowski Technical Support Amperite Co ext Original Message From: AmperiteCo@aol.com To: fkretkowski@optonline.net Sent: Wednesday, November 19, 2008 Subject: C-Series Technical Data Sheet
Solving your relay requirements since 1922
SWUDC Series TDR Solid state CMOS digital circuitry Four timing modes: Delay on operate; delay on release; delay on operate & release; and interval or one-shot DPDT (2 form C) isolated 10 ampere relay
SPST-NO SPDT DPST-NO DPDT
Next-generation PCB Relay Available in Various Models ROHS compliant. High sensitivity: (250mW) and high capacity (16A) models available Low profile: 15.7 mm max. in height. Conforms to EN 61810-1, UL508
ALLEN BRADLEY RELAY Bulletin 700-HF
ALLEN BRADLEY RELAY Bulletin 700-HF Contact Rating DPDT, 3PDT, 4PDT Plug-in Quick Connect Solder Terminals Options: LED, Push-to-Test Operator DEMENSIONS: Bulletin 700-HF Relay (DPDT) Bulletin 700-HF (3PDT)
MODEL: M5DY SEN TRONIC AG CURRENT LOOP SUPPLY. [2] POWER INPUT AC Power M: V AC (Operational voltage range V, Hz)
![MODEL: M5DY SEN TRONIC AG CURRENT LOOP SUPPLY. [2] POWER INPUT AC Power M: V AC (Operational voltage range V, Hz)](/thumbs/90/103899684.jpg "MODEL: M5DY SEN TRONIC AG CURRENT LOOP SUPPLY. [2] POWER INPUT AC Power M: V AC (Operational voltage range V, Hz)")
Super-mini Terminal Block Signal Conditioners M5-UNIT CURRENT LOOP SUPPLY Functions & Features Powering a 0 ma DC current loop Applicable to smart transmitters Isolation between the input and output Fast
(Applicable output load) to 264 (see note 2) (see note 1) (2Aat75to264VAC) G3R-202SLN-US PCB Yes 2 A at 100 to 120 VDC. (2 A at 75 to 132 VDC)
Solid-state Relay Compact SSRs Ideal for Built-in Applications Vertical, compact SSRs with an operation indicator offered in versatile variations. Can be mounted side by side with an electromagnetic relay
TIME DELAY RELAYS Product Summary
Product Summary Macromatic offers a wide variety of time delay relays and accessories. Each one has different features and operating characteristics, allowing you to choose the exact product to meet your
Slim Industrial Relay Type RSLM Electromechanical
Type RSLM Electromechanical RSLM Slim size (width 5mm) High breakdown voltage 4kV (between coil and contacts) Surge voltage up to 6kV (between coil and contacts) Conforms to VDE 0700, 0631 reinforced insulation
78 Series Electromechanical Relay Selection Guide
78 Series Electromechanical Relay Selection Guide Specification 781 Series 782 Series 783 Series 784 Series Coil Voltages Configuration SPDT DPDT 3PDT 4PDT Contact Rating 15A 15A 15A 15A Base Socket 5
Ordering Information. I/O Relay G7T. Model Number Legend Slim-styled I/O Relay Saves Space in Panel
I/O Relay CSM DS_E_2_ Slim-styled I/O Relay Saves Space in Panel SPST-NO, SPST-NC, and SPDT contact forms available for output (SPST-NO only for input). Ultra-slim housing measuring 29 (W) x 0 (D) x 2
Model 720 Electromechanical Hour Meter
Model 720 Electromechanical Hour Meter A 5 figure (reset) or 6 figure (non-reset), AC hour meter encased in a rugged steel housing and designed to mil-spec environmental requirements. The non-reset models
Solid-state Timer H3FA. Model Number Structure. DIP Model Timer for PC Board Use Provides Contact and Solid-state Output
Solid-state Timer H3FA Please read and understand this catalog before purchasing the products. Please consult OMRON representative if you have any questions or comments. Refer to Warranty and Application
Contact form. Operating Force. SPDT 25g Unsealed Solder / 187 Quick Connect. SPDT 50g Unsealed Solder / 187 Quick Connect
VX Miniature Snap Action Switch Compact snap action switch with low force operation Internal mechanism assures outstanding contact reliability Models available for micro load up through 5 Amps ROHS Compliant
DPST-NO None 2 channels Auto-reset Inverse (+/-) 24 VAC/VDC 4 G9SB-2002-A 1 channel or 2
Safety Relay Unit Ultra Slim Safety Relay Unit 17.5 mm wide models available with 2 or 3 poles. 22.5 mm wide 3 pole models also available EN Standards (TÜV approval) DIN-track mounting possible Ordering
RM17UAS. Product datasheet Characteristics. voltage control relay RM17-U - range V DC. Main. Complementary. Price* : 70.
Characteristics voltage control relay RM17-U - range 9..15 V DC Price* : 70.64 GBP Main Range of product Product or component type Relay type Product specific application Relay name Relay monitored parameters
HIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE
HIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE NV (AH7) SWITCHES FEATURES Extra long-life spring mechanism More than 10 7 mechanical operations, 10 electrical High contact rating of 1 Amps with an
Ordering Information. I/O Relay G7T. Model Number Legend Slim-styled I/O Relay Saves Space in Panel
I/O Relay CSM DS_E_4_4 Slim-styled I/O Relay Saves Space in Panel SPST-NO, SPST-NC, and SPDT contact forms available for output (SPST-NO only for input). Ultra-slim housing measuring 29 (W) x 0 (D) x 2
Slim Relay G2RV. Model Number Structure. Ordering Information. Model Number Legend. List of Models. Relay and Socket Combinations
Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Transparent housing enables checking relay
File E41515 Vol. 5 Sec. 5 Page 1 Issued: and Report Revised:
File E41515 Vol. 5 Sec. 5 Page 1 Issued: 11-29-73 and Report Revised: 8-10-01 DESCRIPTION PRODUCT COVERED: Type MY may be followed by Q, followed by 4, may be followed by H3YN or H3YW (Amendment), may
JV SERIES 1 POLE 5 A (MEDIUM LOAD CONTROL) POWER RELAY. RoHS compliant
POWER RELAY 1 POLE 5 A (MEDIUM LOAD CONTROL) JV SERIES RoHS compliant FEATURES UL, CSA, VDE, SEMKO, CQC recognized UL class B (130 C) insulation Low profile and space saving Height: 12.5 mm Mounting space:
must Operate Voltage (V)
force-guided relays g7sa G7SA compact, Slim relays conforming to en Standards Relays with forcibly guided contacts (EN50205 Class A, certifi ed by VDE) Supports the CE marking of machinery (Machinery Directive)
1 POLE 8 A (MEDIUM LOAD CONTROL)
FUJITSU TAKAMISAWA COMPONENT CATALOG POWER RELAY 1 POLE 8 A (MEDIUM LOAD CONTROL) FEATURES UL, CSA, VDE, SEV, SEMKO, FIMKO, ÖVE, BSI recognized UL class B (130 C) insulation 1 form A (SPST-NO) or 1 form
Bulletin 700-HL 2-Pole Terminal Block Relay
Bulletin 700-HL 2-Pole Terminal Block Relay Bulletin 700-HL 2-Pole "Terminal Block Relay" Relay and socket assembled interface modules for high density interposing or isolation applications Screw terminal
Single-phase ( V) voltage monitoring: Undervoltage Overvoltage Window mode (overvoltage + undervoltage) Voltage fault memory selectable
70 Series - Line monitoring relay 70 Features 70.11 70.31 70.41 Electronic voltage monitoring relays for single and three-phase applications Multifunctional types, providing the flexibility of monitoring
Temperature Controller E5C4
Temperature Controller 1/16 DIN Sized, Digital-Set Controller Features Easy-to-Read LED Display Proportional-derivative (PD) control or ON/OFF control models Front panel offset adjustment on PD controllers
7. Approved Standards US: UL, CSA UL: FILE No.E CSA: FILE No.LR31928) 8. Special Function None : Standard U : For ultrasonically cleanable
Subminiature, Sensitive SPDT Signal Switching Relay High sensitivity: 98-mW (Rated power consumption: mw) pickup coil power. Impulse withstand of 1,V ( 1 μs) meets FCC requirements. Stick packing employed
Transistor drive 2c/4c 5A slim power relays
Transistor drive c/c 5A slim power relays NC RELAYS NC Flat type () NC (Plug-in type) RoHS compliant NC Flat type () NC () FEATURES 1. Compact, slim design Use of high-performance flat electromagnetic
MODEL NUMBERS OUTPUT SPECIFICATIONS 1 Zero Voltage and Random Turn-On Switching Panel Mount 600V Transient Capability Internal Snubber 110 & 125A Mode
MODEL NUMBERS OUTPUT SPECIFICATIONS 1 Zero Voltage and Random Turn-On Switching Panel Mount 600V Transient Capability Internal Snubber 110 & 125A Models Available Integrated Overvoltage Protection by Automatic
ABE7R16S210 sub-base - soldered electromechanical relays ABE7-16 channels - relay 10 mm
Characteristics sub-base - soldered electromechanical relays ABE7-16 channels - relay 10 mm Main Range of product Product or component type [Us] rated supply voltage Number of channels 16 Number of terminal
Multi Voltage Options. Multi Voltage Options 110VAC + 24VAC/DC 230VAC + 24VAC/DC 24VAC/DC 110VAC 230VAC
DIN Timers TD 22.5mm DIN rail mounting Electronic Timers AC/DC coil operation Multi-time range Multi-function, On-delay, Off-delay and Star/Delta versions Voltage range selectable Marking plate cover Y
PROGRAMMABLE MULTI-FUNCTION
PROGRAMMABLE MULTI-FUNCTION DIP-Switch Digital-Set TD-8 Series time delay relays plug-in Sixteen user-selectable modes in one unit DIP-Switches for accurate digital set of time delay & selection of function
Time-limit operation/ self-resetting DPDT --- H3M H3M with Y92F-40 adapter SPDT SPDT H3M-H H3M-H with Y92F-40 adapter
Solid-state Timer Solid-state Timer with Variable Time Ranges Four time ranges are selectable per timer unit. Wide timing range of 0.05 second to 30 hours can be covered by a combination of five timer
Combine Relays and P7TF Block Bases to match your application requirements. Use the table below to configure Relay Blocks.
9 Relay I/O Block Reduces Wiring within the Control Panel and Reduces Installation Time 1 Compact 16-pt models: 182 W l 85 D l 68 H mm; 8-pt block width is 102 mm 1 Can be connected to the PLC with a connecting
11 Series - Light Dependent Relay A. Features pole 17.5 mm wide. 1 pole zero hysteresis 4 position selector
Features 11.31 11.41 Relays for automatic control of lighting according to ambient light level - with separate light sensor 11.31-1 NO 16 A output contact Sensitivity adjustment from 1 to 100 lux One module,
PERFORMANCE SPECIFICATION
INCH-POUND MIL-PRF-6106/13F 17 November 2011 SUPERSEDING MIL-PRF-6106/13E 10 November 2000 PERFORMANCE SPECIFICATION RELAY, ELECTROMAGNETIC, 25 AMPERE, 3PST, NO, WITH 2 AMPERE 1PDT AUXILIARY CONTACTS,
Classification Enclosure rating Input voltage Type of
Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Special input type with gold plated contacts.
RM35UB3. Product data sheet Characteristics. voltage control relay RM35-U - range V AC. Main. Complementary
Characteristics voltage control relay RM35-U - range 194..528 V AC Main Range of product Product or component type Relay type Product specific application Relay name Relay monitored parameters Time delay
Switching and controlling in the switch cabinet
Switching and controlling in the switch cabinet Relays Opto-coupler Solid state relays Intelligent interface technology 02 03 MIRO INTERFACE TECHNOLOGY MINIMUM SPACE MAXIMUM FUNCTIONALITY Application areas
RM35TF V AC
Characteristics multifunction phase control relay RM35-T - range 194..528 V AC Main Range of product Product or component type Relay type Product specific application Relay name Relay monitored parameters
Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers
Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers Hydraulic/Magnetic Circuit Breaker B-Series B-Series PDF elibrary The B-Series hydraulic/magnetic circuit breakers are compact and
CurrentWatch Current Sensors. EGF Series Ground Fault Sensors. Ground Fault Sensors with Solid-State or Mechanical Relay Outputs.
CurrentWatch Current Sensors Ground Fault Sensors with Solid-State or Mechanical Relay s 1 Contents Overview.................... 1 Model Selection, Switches...... 2 Model Selection, Accessories... 3 Wiring
General Purpose Phenolic
Switch Features 8 Contact Ratings DC ratings optional Standard or light force versions available High temperature versions optional Agency approved long life versions optional Electrical Ratings and Operating
PERCENT OF RATED CURRENT
A-D Series Time Delay Values PERCENT OF RATED CURRENT NOTES: UL489 C-Series Breakers available with Delay Curves 11, 12, 14, 16, 21, 22, 24, 26, 42, 44, 46. Delay Curves 11,12,14,16,21,22,24,26,42,44,46,52,54,56:
RM17UB3. Product data sheet Characteristics. voltage control relay RM17-U - range V AC. Main. Complementary
Characteristics voltage control relay RM17-U - range 183..528 V AC Main Range of product Product or component type Relay type Product specific application Relay name Relay monitored parameters Time delay
Section 5 Dedicated Timers
Section 5 Dedicated Timers Dedicated Note: DIN Rail Mounting Product pages are not included in this catalog. Go to: www.ssac.com/sg5.pdf Click on the Product Name (ie: CT-SDS) to open the catalog page.
H3CR-F H3CR-F8 H3CR-F-300 H3CR-F8-300
R Solid-State Repeat-Cycle Timer 1/1 DIN Solid-State Repeat-Cycle Timer Wide power supply ranges of 100 to 240 VAC 24 VAC/VDC, 12VDC Combinations of independent long or short / time settings are possible
Solid-state Timer. Ordering Information. Specifications. Miniature Timer Compatible with the MY Relay. Accessories. Time Ranges
Solid-state Timer Miniature Timer Compatible with the MY Relay Large transparent time-setting knob facilitates time setting. Flat-blade and Phillips screwdrivers can also be used for time setting. Approved
Zelio Relay - plug-in relays
Presentation Presentation offer the advantages of compact size and modular design: their slim width ( mm) saves space when mounting on a rail at the back of an enclosure. RSL relays are available in two
Long seller backed by product variety and high reliability
Long seller backed by product variety and high reliability DS RELAYS RoHS compliant FEATURES 1. Breakthrough height of 9.8 mm.386 inch beats the 1 mm.394 inch limit 1c and 2c all have the same height (9.8
RM84 / RM85 / RM87 Miniature Electromagnetic Relays
Miniature dimensions Cadmium - free contacts 5000 V / 10 mm reinforced insulation For PCB and plug-in sockets Available special versions with the increased dielectric strength of the contact clearance
G9SA. Ordering Information. Safety Relay Unit. The G9SA Series Offers a Complete Line of Compact Units. H Several types of 45-mm wide Units are
Safety Relay Unit The G9SA Series Offers a Complete Line of Compact Units H Several types of -mm wide Units are available: a -pole model, a -pole model, models with poles and OFF-delay poles H 7.-mm wide
1 pole 17.5 mm wide 2,000 2, ,000 1,000 halogen W DC / / / / 30
Series - Light Dependent Relay 12-16 A SERES Features.31.41 Relays for automatic control of lighting according to ambient light level - with separate light sensor.31-1 NO 16 A output contact Sensitivity
MODEL: M1EXM. OUTPUT Field-selectable DC Output Current output: 0-20 ma DC Voltage output: V DC Voltage output: V DC
2 Channel Super-mini Signal Conditioners with Display M1E Series POTENTIOMETER TRANSMITTER (2 channels, PC programmable) Functions & Features Potentiometer s zero/span points can be captured by onsite
Ice Cube Relays. R2/R4 Plug-in Power Relays... G58 Technical Information... G63. R15 Plug-in Power Relays... G68 Technical Information...
Ice Cube Relays R2/R4 Plug-in Power Relays... 58 Technical Information... 63 R15 Plug-in Power Relays... 68 Technical Information... 72 RUC Plug-in Power Relays... 76 Technical Information... 79 RY2 Plug-in
Model Number Structure
Solid State Relays with Failure Detection Function G3PC CSM_G3PC_DS_E_1_1 Refer to Safety Precautions for All Solid State Relays. Detects failures in SSR used for heater temperature control and simultaneously
Relay actuators & Status indicating modules
19 SЕRIES Relay actuators & Status indicating modules Panels for electrical distribution FINDER reserves the right to alter characteristics at any time without notice. FINDER assumes no liability for damage
Magnecraft Time Delay and Sensor Relays. Catalog
Magnecraft Time Delay and Catalog 0 Contents Magnecraft Time Delay and Series Overview... 0 Series Relays.... Series Voltage Sensing Relays... Series Current Sensing Relays...0 00 Series Accessories....
SRT2-ROC08, SRT2-ROC16
Ultra-miniature 8-point and 16-point Relaymounted Terminals Ultra-compact (8-point models: 101 x 51 x 51 mm (W x H x D); 16-point models: 156 x 51 x 51 mm (W x H x D)) MOS FET Relay and Relay models. DIN
MODEL CIO-EN MODBUS/TCP, MODBUS/RTU I/O MODULE
INSTALLATION INSTRUCTIONS Revision B1 Rapid City, SD, USA, 05/2009 MODEL CIO-EN MODBUS/TCP, MODBUS/RTU I/O MODULE BE SURE POWER IS DISCONNECTED PRIOR TO INSTALLATION! FOLLOW NATIONAL, STATE AND LOCAL CODES.
Color Mark Photoelectric Sensor E3S-VS
Sensing Supply voltage Output 12 to 80 ma, with 1.5 to 4 ma constant current source; 1.2 cm, 5 cm 100 ma, Color Mark Photoelectric Sensor Small Color Mark Sensor With Built-In DC Amplifier Fast, 1 ms maximum
Distinctive Characteristics
Distinctive Characteristics Full face, bright LED illumination in choice of red, green, and amber for visible status indication. 9-amp or 6-amp electrical capacity in compact body. Interior shield prevents
C-Series. Circuit Breaker
C-Series Circuit Breaker The C-Series hydraulic/magnetic circuit breakers are ideal for applications that require higher amperage and voltage handling capability in a smaller package. They are available
Sorensen DLM 600 Series W V 2 75 A. Half Rack Programmable DC Power Supply
Sorensen DLM 600 Series Half Rack Programmable DC Power Supply high, half rack (8.5 inches) wide; no top or bottom clearance spacing required. rms, noise as low as 15mV p-p. 0-5kΩ. 375 600 W 5 300 V 2
Alphanumeric Index. Circuit Breakers Transformers Low-signal PC Board Relays Mid-Range PC Board Relays...
Alphanumeric Index Series Type Page CS... Voltage Sensor... 1302 PMA/PMB... Three Phase Power Quality Monitor... 1305 SDAS-01... Current Monitor... 1307 VCA... Single Phase Undervoltage Relay... 1303 VMA...
HIGHLY SENSITIVE 1500 V FCC SURGE BREAKDOWN VOLTAGE MINIATURE RELAY
HIGHLY SENSITIVE 1500 V FCC SURGE BREAKDOWN VOLTAGE MINIATURE RELAY DS RELAYS RoHS Directive compatibility information http://www.mew.co.jp/ac/e/environment/ FEATURES 1. Breakthrough height of 9.8 mm.386
70 SERIES. Line monitoring relay
70 SRIS 70 SRIS lectronic voltage monitoring relays for single and three-phase applications Multifunctional types, providing the flexibility of monitoring Undervoltage, Overvoltage, Window Mode, Phase
Miniature Basic Switch
Miniature Basic Switch Reliable and Safe Basic Switch Self-cleaning contacts. Best-seller Switches with switching currents of 10 to 21 A. Can be used for shutting down current in doors. Widely used for
HIGHLY SENSITIVE 1500 V FCC SURGE BREAKDOWN VOLTAGE MINIATURE RELAY
HIGHLY SENSITIVE 15 V FCC SURGE BREAKDOWN VOLTAGE MINIATURE RELAY DS RELAYS FEATURES 1. Breakthrough height of 9.8 mm.386 inch beats the 1 mm.394 inch limit 1c, 2c, and 4c all have the same height (9.8
PR - PCB relay. 42 catalog 2002 e / the PR-PCB relay. By using best materials and because of the simple construction the highest failsecurity
PR - PCB relay the PR-PCB relay PCB-Relay from the PR family are small relays. The version has forced guided contacts, 2 normally open contacts, 2 normally closed contacts. In the industrial electronic
WIEG-EXT Wiegand to RS485 extender module.
WIEG-EXT Wiegand to RS485 extender module. Designed for embedding into products manufactured by third-parties, this Wiegand to RS485 extender is designed to transfer wiegand data from Access Control Card
Bulletin 700-HA Tube Base Relay
Bulletin 700-HA Tube Base Relay Bulletin 700 HA Tube Base Relay 10 A contact rating DPDT, 3PDT Pin-style terminals Standard ON/OFF flag indicator Options: LED, push-to-test and manual override, socket-mounted
TIME DELAY RELAYS Product Summary
Product Summary Macromatic offers a wide variety of time delay relays and accessories. Each one has different features and operating characteristics, allowing you to choose the exact product to meet your
Photoelectric Sensors 20 Series
PG.05E.22.T.E Extremely Rugged Construction, Long Sensing Ranges and High Current Switching Contents Overview........................ Model Selection, Sensors......... 2 Model Selection, Output Devices..................
RY SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY FEATURES ORDERING INFORMATION
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FEATURES Ultra high sensitivity UL, CSA recognized Conforms to FCC rules and regulations Part 68 Surge strength 1,500 V High dielectric strength
USB-PDISO8 Specifications
USB-PDISO8 Specifications Document Revision 1.2, February, 2010 Copyright 2010, Measurement Computing Corporation Typical for 25 C unless otherwise specified. Specifications in italic text are guaranteed
Plug-in relays RH control relays Instantaneous (RHN) and latching (RHK)
Characteristics Instantaneous (RHN) and latching (RHK) Type RHN RHK Environment Classification Standard version EDF, BV, USSR Conforming to standards Standard version IEC 255, NF C 45-25, VDE 435, BS 4794
Switching relay CT-IRS with 1, 2 or 3 c/o contacts Data sheet
1SVR 430 221 F7300 2 1 3 Characteristics Switching relay ON-delay approx. 10 ms 1, 2 or 3 c/o contacts Switching relay with gold-plated contacts Width 22.5 mm Approvals e f GOST CCC CT-IRS 1 U/R: green
C-Series. Circuit Breaker
C-Series Circuit Breaker The C-Series hydraulic/magnetic circuit breakers are ideal for applications that require higher amperage and voltage handling capability in a smaller package. They are available
Main contacts Auxiliary contact Number of input channels Rated voltage Model Category 24 VAC/VDC 3PST-NO SPST-NC 1 channel or 2 channels possible
Safety Relay Unit Four kinds of -mm wide Units are available: A -safety contact model, a -safety contact model, and models with safety contacts and OFF-delay safety contacts. Also available are 7.-mm wide
RM17TG. Main. Product or component type. Product specific application. Relay monitored parameters. Switching capacity in VA
Characteristics phase control relay RM17-T - range 183..484 V AC Main Range of product Product or component type Relay type Product specific application Relay name Relay monitored parameters Switching
Special-Purpose Photoelectric Sensors
Special-Purpose Photoelectric Sensors Miniature Sensors with Separate Amplifiers Fit Tight Spaces Fast, 1 ms response time Light incident indicator on sensor Dust-resistant flat lens surface New, thin
NON-PROGRAMMABLE ON DELAY, INTERVAL, TRUE OFF DELAY & FLASHER
time delay relays plug-in NON-PROGRAMMABLE ON DELAY, INTERVAL, TRUE OFF DELAY & FLASHER Onboard & remote adjustable or fi xed time delays from 0.05 seconds to 2 hours Uses industry-standard 8 pin octal
Conforms to VDE0435/2021 C/250, VDE0110, VDE0106/P100 Conforms to EN , pren
Solid-state Power OFF-delay Timer II DIN 22.5-mm Solid-state Power OFF-delay Timer High immunity to invertor noise. Long power OFF-delay times; S-series: up to 12 seconds, L-series: up to 120 seconds.
MODEL: 43AL1. Digital Panel Meters 43 Series
Digital Panel Meters 43 Series LOOP POWERED DIGITAL PANEL METER (process meter) Functions & Features Loop powered -1999 to 9999 compact digital meter Scaling function Screwless spring terminal 24 (.94)
pole 17.5 mm wide. electronic ballast W
SERES SERES Relays for automatic control of lighting according to ambient light level - with separate light sensor.31-1 NO 16 A output contact Sensitivity adjustment from 1 to 100 lux One module, 17.5
Schneider Electric Legacy Time Delay and Sensor Relays. Catalog
Schneider Electric Legacy Time Delay and Catalog 0 Contents Series Overview... 0 Series Relays.... Series Voltage Sensing Relays... Series Current Sensing Relays...0 00 Series Accessories.... TDR Series
FCC17 Series FILTERED STACKED D-SUB CONNECTORS
FCC17 Series FILTERED STACKED D-SUB CONNECTORS Ordering Information Stacked D-Sub FCC17 2 BP BS 4 5 5 X FCC17 2 VERTICAL MOUNTING DIMENSION BETWEEN CONNECTORS 1 =.625" [15.88 mm] 2 =.750" [19.05 mm] BP
Model Number Structure
Solid State Relays with Failure Detection Function G3PC Detects failures in SSR used for heater temperature control and simultaneously outputs alarm signal. This SSR supports the safe design of heater
D2SW-3L1HS D2SW-01L1HS
Sealed Snap Action Switch D2SW Watertight Miniature Snap Action Switch High-quality watertight miniature Snap Action switch. Switch Body meets IP67 (IEC 529) requirements Monoblock construction assures
Self-Powered Counters H7EC
Self-Powered Counters Subminiature Count Totalizers Require No External Power Supply Subminiature 8 x mm (1.89 x.9 in) Improved noise immunity Screw terminal and wire-wrap types available AC, DC, and no-voltage
New relay, production not started, engineering samples available. 1 POLE - 8A Reflow Solderable Relay
New relay, production not started, engineering samples available FTR-K1 SERIES POWER RELAY 1 POLE - 8A Reflow Solderable Relay JS Series FEATURES UL class B (130 C) coil wire insulation 1 form A (SPST-NO)
G3PC. Model Number Structure. Solid State Relays with Failure Detection Function. Model Number Legend
Solid State Relays with Failure Detection Function G3PC Refer to Warranty and Application Considerations (page 1), Safety Precautions (page 4), and Technical and Safety Information (page 6). Detects failures
GT3F Series True OFF Delay Timers
TF Series TF Series True OFF Delay Key features of the TF series include: Mountable in sockets or flush panel True power OFF-delay up to 10 minutes No external control switch necessary Available with reset
Section 5 Dedicated Timers
Section 5 Timers Note: DIN Rail Mounting Product pages are not included in this catalog. Go to: www.ssac.com/sg5.pdf Click on the Product Name (ie: CT-SDS) to open the catalog page. [dobe crobat Reader
T imers Timers Selection Guide Timing Diagrams Overview RTE Series Analog Timers Instructions onlinecomponents.com IDEC.
Industrial Automation Catalog Section - U906 imers Selection uide iming Diagrams Overview RE Series Analog imers Instructions imers For up-to-date information, or to request a full copy of this catalog,
ABE7R16S210 sub-base - soldered electromechanical relays ABE7-16 channels - relay 10 mm
Characteristics sub-base - soldered electromechanical relays ABE7-16 channels - relay 10 mm Main Range of product Product or component type [Us] rated supply voltage Number of channels 16 Number of terminal
SYSMAC Remote Transistor Module
9 SYSMAC Remote Transistor Module Ultra-compact Remote I/O Modules to Match Most Applications 1 4-point, 8-point and 16-point models 1 4-point models measure 82 W x 32 D x 64.5 H mm; 8- and 16-point models
MODEL: M1EXV. OUTPUT Field-selectable DC Output Current output: 0-20 ma DC Voltage output: V DC Voltage output: V DC
MODEL: M1EX 2 Channel Super-mini Signal Conditioners with Display M1E Series SIGNAL TRANSMITTER (2 channels, PC programmable) Functions & Features Converts DC input from a sensor into a standard process
Basic Switch. Pin plunger Short hinge Hinge lever Long hinge lever Simulated hinge Short hinge Hinge roller lever lever roller lever lever
Basic Switch MINIATURE Watertight Miniature Basic Switch High-quality watertight, high-precision miniature basic switch meets IP67 requirements IEC 529 (lead wire type) Monoblock construction assures high
7511 / / / 711 / / 731 / Preset 27
22 Timers Timers Electronic 23 7511 / 3410 23 6320 / 720-6300 24 ElectRo-MeCH 25 710 / 711 / 720 25 722 / 731 / 732 26 Preset 27 7932 27 Electronic 23 7511 Series 8 digit self powered LCD electronic timer
KU series KUP Enclosed Relay KUIP VDE 8mm Coil to Contacts KUGP VDE 8mm 3mm Gap Coil to Contacts KUEP 10 Amp 150VDC Load Switching KUMP 15 Amp 277VAC
P& KU series KUP Enclosed Relay KUIP VDE 8mm Coil to Contacts KUGP VDE 8mm 3mm Gap Coil to Contacts KUEP 10 mp 150VDC Load Switching KUMP 15 mp 2VC File E2255 File LR1534 0435 Registration 12 (KUIP) 0435