Cassia Siamia AUTOMATIC KARL FISCHER TITRATION APPARATUS DIGITAL AUTOMATIC KARL FISCHER TITRATION APPARATUS

Transcription

1 AUTOMATIC KARL FISCHER Model Veego / MATIC-I Cost Effective Automatic Karl Fischer Titrator Automatic Determination of Find Point Helps to Eliminate Human Errors. A Solid State Circuitry using latest types of Sensitive IC s Ensures Accurate reproducible Results. DIGITAL AUTOMATIC KARL FISCHER Model Veego / MATIC-D Instrument with Automatic Dispenser for Reagent. Digital Display Readability: 0.01 MI. With Built-in Calibration Program. Automatic Working completely eliminates Human Errors. Accurate, Fast, Convenient to operate. Sturdy Construciton maximum protection for sensitive circuitry. MICROPROCESSOR BASED DIGITAL AUTOMATIC KARL FISCHER Model Veego / MATIC-MD (PC) User friendly automatic titrator for reliable and accurate estimation of moisture. Instrument with micro controller, self explenatory Alphanumeric display. Automatic Calculations of Moisture content in mgs, PPM or Percentage. Printer port provided to connect printer Smart Titrator with Built-in CALIBRATION program. MICROPROCESSOR BASED DIGITAL AUTOMATIC KARL FISCHER (COULOMETRIC) Model Veego / MATIC-III Suitable for estimating very minute traces of moisture in samples such as transformer Oils/insulating oils & petrochemical products. Printer port provided to connect printer. Range upto Mg. Readability: Mg. Accuracy: 0.01 Mg. Highest Accuracy with simple opeation.

2 MICROPROCESSOR BASED DIGITAL AUTOMATIC POTENTIOMETRIC Model AUTO POT-I Suitable for Aqueous/non-aqueous, Oxidation Reduction and a range of other Titrations. A high precision metering dispenser is used to add the Titrant Accurately. The end point of the titration is determined automatically. Built-in facility to check the Calibration of the instrument. Fully automatic operation completely eliminates human errors and ensures the highest accuracy. Versatile universal titration system. PRECISION DIGITAL MELTING POINT APPARATUS Model VMP-D/DS With Silicon oil bath heating Digital temperature indicator Suitable for melting point/boiling point. Recommended for melting range. Suitable for any type of samples. With magnifying lense. Temperature ranges 2 0 c above room temperature upto C. DIGITAL AUTOMATIC MELTING POINT APPARATUS Model VMP-II/III Designed to determine the melting points of noncolored solids, with high accuracy. This unit has an arrangement to hold the capillary containing the smaple in uniformly heating media. Temperature is indicated by a digital display readable in 1.0/0.1 Deg.C. At the point when the sample melts, the heating is automatically cut-off and the digital display shows the melting point on the indicator till it is cleared. No Silicon oil or other bath is reuired as heating media. Melting Range: 2.0 Deg. C, above room temperature to 300 deg. C. Accuracy: 0.3% MICROPROCESSOR BASED PROGRAMMABLE MELTING POINT APPARATUS Model VMP-PM With Silicon oil bath heating 4 line LCD Display. Suitable for melting point / boiling point. Recommended for melting range. Self validation facility. Printer interface. Suitable for any type of samples. Temperature range 2 0 C above room temperature upto C

3 PROGRAMMABLE MICROPROCESSOR BASED MELTING POINT APPARATUS WITH COLOUR MONITOR Model VMP-CM Equipped with Silicon Oil heating bath. 4 line LCD Display Suitable for Melting Point/boiling point. Recommended for melting range. Self validation facility. Printer Interface. Temperature range 2 0 C above room temperature upto C It is equipped with colour monitor & digital camera, which magnifies image of capillary with sample, so that minute physical changes can be observed on the colour monitor with fase. MICRO PROCESSOR BASED DIGITAL TABLET DISSOLUTION TEST APPARATUS Model VDA-8D 25 programmable Test parameters Stepper motor drive Graphic LCD Screen Micro controller based temperature system Dual channel temperature sensor Stirrer speed 25 to 200 RPM Follows USP/IP/BP specifications. Printer Interface (Parallel) Non Volatile memory Facility to connect auto sampling unit MICROPROCESSOR BASED DIGITAL TABLET DISSOLUTION TEST APPARATUS SIX AND EIGHT TESTS (For Routing Q.C. Tests) Model VDA-6DR/8DR Programmable Test Parameters Stepper Motor Drive 2 Line LCD Screen Micro Controller based temperature system Stirrer speed 25 to 200 RPM Follows USP/IP/BP specifications. Printer interface (Parallel) Single & three station instrument with vessel capacity 4 liters available

4 TABLET DISINTEGRATION TEST APPARATUS Model VTD-2 Cost effective nondigital instrument. Equipped with water bath for uniform temperature Temperature control through sensitive thermostat. Temperature measured by precision thermometer Follows USP/IP specifications. DIGITAL TABLET DISINTEGRATION TEST APPARATUS Model VTD-D Programmable Test Patterns 4 lines LCD display. Microcontroller based temperature system. Follows USP/IP specifications. PROGRAMMABLE DIGITAL TABLET DISINTEGRATION TEST APPARATUS Model VTD-AV Double baskets unit with water bath, designed to conduct two batches of disintegration tests of tablets as per new IP & USP Standards. The instrument is equipped with two Japanese stepper motors which can be operated independently. Two different batch products can be analyzed at a time. Dual channel temperature system to ensure accurate and precise temperature control of the tank and beakers. Illuminator for clear observations of disintegration process has been provided. Illustrative blue graphics display to observe temperature and set time for both tests side-by-side, at a glance. Facility provided to prevent over shotting of temperature. Centronics printer interface provided for recording. Parameters like temperature, batch no. product Id, facility for self-validation of RPM is incorporated. The equipment meets all international standards with respect to calibration, validation and IQ, OQ requirements.

5 DISINTEGRATION TEST APPARATUS FOR PESSARIES, SUPPOSITORY TABLETS Model VTS-2 Designed for Measurement of desintegration time of Pessaries and suppositories LCD display screen to indicate test parameters. Automatic rotation through 180 Deg and selectable cycle time. Built-in circulation pump and sensitive circuit to maintain accurate temperature at C Three samples tested at the same time. The instrument meets the requirements of the pharamacopocias. DIGITAL ADVANCED TABLET FRIABILITY TEST APPARATUS, WITH VALIDAITON FACILITY Model VFT-DV Latest controller based circuitry 2 line alpha-numerical display Printer and balance interface provided Facility to program rotations as well as timer Attachment for two drums Facility for abrasion and friability drums Validation facility 10 0 Tilt facility User friendly key board for data entry DIGITAL AUTOMATIC TAP/BULK DENSITY TEST APPARATUS Model VTAP / MATIC - II This unit is used for measuring bulk / tapped density of powder, granules, pellets etc. It is suitable for both USP methods I & II having provision to hold two cylinders. This instrument automatically calculates the percentage difference between tapped volumes, tapped density, compressibility index, housner ratio etc. Simultaneous tapping and rotating movement provided Printer interface provided

6 LEAK TEST APPARATUS Model Digital Leak Test 150mm / 300mm Instrument suitable to check Blister packs & strips for leak test. Compact GMP Model Diaphragm type vacuum pump Polycarbonate vacuum desiccator Vacuum level upto 22 of Hg. Available in diameters 150 / 200 / 250 / 300 mm