live work Arc Flash Solutions Stock Labels Make-it-yourself Solutions Training Aids Arc Flash Facts

Size: px

Start display at page:

Download "live work Arc Flash Solutions Stock Labels Make-it-yourself Solutions Training Aids Arc Flash Facts"

Clemence Mathews
6 years ago
Views:

1 Arc Flash Fact Sheet Brady Arc Flash Training Aids Categories & Personal Protection Requirements Promote awareness of the dangers associated with arc flash accidents and make sure your workers know how to protect themselves! Taken from NFPA 7E, Standard for Electrical Safety in the Workplace Hazard Required Flash Protection Equipment* Incident Energy cal/cm Hazard Longsleeve Shirt & Long Pants (natural ﬁbers) (as needed) Hazard (as needed) Hazard Hazard Hazard work live OSHA is citing for arc flash violations. Know the requirements! NFPA 7E Standard For Electrical Safety In The Workplace,. (C) Equipment ing Electrical equipment that is in other than dwelling units, and is likely to require examination, adjustment, servicing, or maintenance while energized, shall be ﬁeld marked with a label containing all the following information: () At least one of the following: Available incident energy with corresponding working distance, Minimum arc of clothing, Required level of PPE, and/or Highest Hazard/ (HRC) for the equipment. Q Laminated on both sides to stand up to industrial environments Q Full-color printing and eye-catching graphics for optimum visual impact each & electrical parts. For further information, refer to NFPA 7E, Standard For (cal/cm)! # $ % electrical parts. For further information, refer to NFPA 7E, Standard For # $ (cal/cm) & ' ' ( $ ) # # $ * ' ' ( $ ) # # $ Post signs and labels in the work area and near electrical equipment to boost awareness and compliance Q s and labels specify the personal protection equipment required for each arc ﬂash hazard category Q : BradyTuff B- rigid plastic, laminated graphics : Self-sticking B- polyester with overlaminate 5! # $ % # $ & Energy ' ' ( $ ) # present. # $ 5 *Arc Rating of PPE should correspond with the Hazard level and Incident Voltage-rated gloves and other shock protection may also be required when *working on exposed energized parts. See Table.7(C)(9) in the NFPA regulation. ' ' ( $ ) # # $ Q *Arc Rating of PPE should correspond with the Hazard level and Incident Energy present. Voltage-rated gloves and other shock protection may also be required when working on exposed energized parts. See Table.7(C)(9) in the NFPA regulation x.5 x 5 each Q Meets NFPA 7E.(A) requirements which mandate the use of a written permit when performing live electrical work Q -ply carbonless copy paper 997 NFPA 7 National Electric Code,.6 Flash Protection.5 x Permit Q Wear the proper protective gear when working on or near exposed energized electrical parts. For further information, refer to NFPA 7E, Standard For Electrical Safety In The Workplace. and long pants (natural fibers)! # $ * % # $. (cal/cm) N/A (cal/cm) ' ' ( $ ) # # $ % * ' ' ( $ ) # # $ * Front Q *Arc Rating of PPE should correspond with the Hazard level and Incident Energy present. Voltage-rated gloves and other shock protection may also be required when working on exposed energized parts. See Table.7(C)(9) in the NFPA regulation. Continued on back For more information visit: BE SAFE! De-energize and lockout equipment before service or maintenance. Back Q Ensure compliance and safety by providing each employee with their own arc ﬂash wallet card Card speciﬁes the personal protection equipment required for each arc ﬂash hazard category Made of laminated cardstock, two-sided printing 55 Y5 Brady Worldwide Inc. ALL RIGHTS RESERVED x () Arc ﬂash boundary. * Arc Rating of PPE should correspond with the Hazard level and Incident Energy present.voltage-rated gloves and other shock protection may also be required when working on exposed energized electrical parts. Highlights the common causes of arc ﬂash and provides safe work practices and personal protection equipment requirements 57 () Nominal system voltage. Switchboards, panelboards, industrial control panels, meter socket enclosures, and motor control centers that are in other than dwelling occupancies and are likely to require examination, adjustment, servicing, or maintenance while energized shall be ﬁeld marked to warn qualiﬁed persons of potential electric arc ﬂash hazards. The marking shall be located so as to be clearly visible to qualiﬁed persons before examination, adjustment, servicing, or maintenance of the equipment. Q. x. Card /pack USA Customer Service: Inside Sales: Canada Customer Service: Mexico Customer Service: Inside Sales: ext 77 Arc Flash Solutions Stock Make-it-yourself Solutions Training Aids Arc Flash Facts

2 Arc Flash Fact Sheet Brady Arc Flash Training Aids Categories & Personal Protection Requirements Promote awareness of the dangers associated with arc flash accidents and make sure your workers know how to protect themselves! Taken from NFPA 7E, Standard for Electrical Safety in the Workplace Hazard Required Flash Protection Equipment* Incident Energy cal/cm Hazard Longsleeve Shirt & Long Pants (natural ﬁbers) (as needed) Hazard (as needed) Hazard Hazard Hazard work live OSHA is citing for arc flash violations. Know the requirements! NFPA 7E Standard For Electrical Safety In The Workplace,. (C) Equipment ing Electrical equipment that is in other than dwelling units, and is likely to require examination, adjustment, servicing, or maintenance while energized, shall be ﬁeld marked with a label containing all the following information: () At least one of the following: Available incident energy with corresponding working distance, Minimum arc of clothing, Required level of PPE, and/or Highest Hazard/ (HRC) for the equipment. Q Laminated on both sides to stand up to industrial environments Q Full-color printing and eye-catching graphics for optimum visual impact each & electrical parts. For further information, refer to NFPA 7E, Standard For (cal/cm)! # $ % electrical parts. For further information, refer to NFPA 7E, Standard For # $ (cal/cm) & ' ' ( $ ) # # $ * ' ' ( $ ) # # $ Post signs and labels in the work area and near electrical equipment to boost awareness and compliance Q s and labels specify the personal protection equipment required for each arc ﬂash hazard category Q : BradyTuff B- rigid plastic, laminated graphics : Self-sticking B- polyester with overlaminate 5! # $ % # $ & Energy ' ' ( $ ) # present. # $ 5 *Arc Rating of PPE should correspond with the Hazard level and Incident Voltage-rated gloves and other shock protection may also be required when *working on exposed energized parts. See Table.7(C)(9) in the NFPA regulation. ' ' ( $ ) # # $ Q *Arc Rating of PPE should correspond with the Hazard level and Incident Energy present. Voltage-rated gloves and other shock protection may also be required when working on exposed energized parts. See Table.7(C)(9) in the NFPA regulation x.5 x 5 each Q Meets NFPA 7E.(A) requirements which mandate the use of a written permit when performing live electrical work Q -ply carbonless copy paper 997 NFPA 7 National Electric Code,.6 Flash Protection.5 x Permit Q Wear the proper protective gear when working on or near exposed energized electrical parts. For further information, refer to NFPA 7E, Standard For Electrical Safety In The Workplace. and long pants (natural fibers)! # $ * % # $. (cal/cm) N/A (cal/cm) ' ' ( $ ) # # $ % * ' ' ( $ ) # # $ * Front Q *Arc Rating of PPE should correspond with the Hazard level and Incident Energy present. Voltage-rated gloves and other shock protection may also be required when working on exposed energized parts. See Table.7(C)(9) in the NFPA regulation. Continued on back For more information visit: BE SAFE! De-energize and lockout equipment before service or maintenance. Back Q Ensure compliance and safety by providing each employee with their own arc ﬂash wallet card Card speciﬁes the personal protection equipment required for each arc ﬂash hazard category Made of laminated cardstock, two-sided printing 55 Y5 Brady Worldwide Inc. ALL RIGHTS RESERVED x () Arc ﬂash boundary. * Arc Rating of PPE should correspond with the Hazard level and Incident Energy present.voltage-rated gloves and other shock protection may also be required when working on exposed energized electrical parts. Highlights the common causes of arc ﬂash and provides safe work practices and personal protection equipment requirements 57 () Nominal system voltage. Switchboards, panelboards, industrial control panels, meter socket enclosures, and motor control centers that are in other than dwelling occupancies and are likely to require examination, adjustment, servicing, or maintenance while energized shall be ﬁeld marked to warn qualiﬁed persons of potential electric arc ﬂash hazards. The marking shall be located so as to be clearly visible to qualiﬁed persons before examination, adjustment, servicing, or maintenance of the equipment. Q. x. Card /pack USA Customer Service: Inside Sales: Canada Customer Service: Mexico Customer Service: Inside Sales: ext 77 Arc Flash Solutions Stock Make-it-yourself Solutions Training Aids Arc Flash Facts

3 Brady Stock Brady Make-it-Yourself Printing Systems Brady offers a variety of stock label formats. Basic warning and danger labels meet all OSHA and NFPA requirements, or for more complete accident prevention use write-on labels and fill in the appropriate hazard and safety information. Brady s Make-it-Yourself printing systems feature Brady s Performance dpi Thermal Transfer Printers optimized to print Brady Media and your Arc Flash labeling requirements. The printers are designed to be a convenient, flexible and cost-effective way to create, modify and print labels on demand. Arc Flash with Pre-printed Hazard Categories Q come with the hazard category and PPE requirements preprinted Q Write-in areas for speciﬁcs such as min arc, ﬂash protection boundary, etc. Q Flash Protection Boundary Hazard Incident Energy (cal/cm ) Flash Protection Equipment FLASH PROTECTION SHOCK PROTECTION Hazard Incident Energy (cal/cm) V- Arc-rated flash suit jacket, pants and hood (with arc-rated hard hat liner AN) (ear canal inserts) and leather work shoes or safety goggles Arc-rated flash suit hood or arc-rated face shield and arc-rated balaclava and safety glasses or safety goggles (ear canal inserts) and leather work shoes *Y567* # BRADYID.COM Y567 # BRADYID.COM Y567 x 6 Arc ﬂash hazard Learn more with our Arc Flash Whitepaper Download the Arc Flash ing Whitepaper to learn more details about compliance regulations, labeling standards, best practices and more. Download by visiting *Y567* 5 x 7 Arc ﬂash & shock hazard Hazard x 6 x 6 x 6 x 6 x 6 x 6 x 6 x 6 x 6 x Hazard COMP LY INCREA WITH NEW RE SE SAVE CO SAFETY AN GULATIONS, D ARC FL STS WITH PR ASH LA OP BELING ER By Dani elle Gallo, Prod Last upda uct Specialist, Brady ted: Dece Corporati mber, on Q Write-in areas for equipment-speciﬁc information like ﬂash protection boundary, hazard category, and required PPE. Q Hazard Incident Energy (cal/cm ) Hazard FLASH PPE x 6 Arc ﬂash hazard 79 Incident Energy (cal/cm) SHOCK PPE V- *Y567* # BRADYID.COM Y567 x 6 x 6 # BRADYID.COM Y567 *Y567* Arc ﬂash & shock hazard Brady s IP Thermal Transfer Printer is a new, smart solution for high-performance printing. The Brady IP Printer is a fully integrated, easy-to-use printer, material, and software system. Smart Cell technology allows the printer, materials, and ribbon to communicate with each other. The system offers material recognition, automatic formatting, and userfriendly printer features for labels, sleeves, and tags. The Bradyprinter PR Plus is a high performance, heavy duty industrial thermal transfer printer designed to last in industrial environments. For enhanced usability, the thermal transfer printer features an easy-to-read graphic and alphanumeric LCD menu display with a convenient navigator pad and a backlit graphic display for fast, easy access to menu options. The printer offers the barcoding and graphics features you need in a durable, high-volume printer that s easy to use. BP-IP BP-IP-C BP-IP6 BP-IP6-C IP-R6 Brady IP dpi Printer Brady IP dpi Printer with cutter Brady IP 6 dpi Printer Brady IP 6 dpi Printer with cutter Brady IP Printer Ribbon, Black BP-PR+ BP-PR+-PPR BP-PR6+ BP-PR6+-PPR BP-PR6+ BP-PR6+-PPR PR+-AutoCutter-FI mil clear polyester overlaminate sheets help protect handwritten data on vinyl labels from chemicals and abrasion. Sheets have an acrylic layﬂat liner x x 7.5 GlobalMark Printer BBP and Printer GlobalMark Color & Cut Printer GlobalMark MultiColor Printer GlobalMark Ribbon, Black/Orange GlobalMark Ribbon, Black/Red GlobalMark Ribbon, Black/Red/Orange/Blue BBP BBP-ARCFLASH-KIT BKIT-ARCFLASH-W B-R BBP & Printer BBP Printer w/ Arc Flash Supply Kit Arc Flash Supply Kit for BBP BBP Printer Ribbon, Black PR Plus dpi Printer PR Plus dpi Printer with Peel & Present PR6 Plus dpi Printer PR6 Plus dpi Printer with Peel & Present PR6 Plus 6 dpi Printer PR6 Plus 6 dpi Printer with Peel & Present PR+ Field Installable Cutter CU Pre-printed for IP and PR Plus Printers Protective Overlaminate for Write-on Create your own custom signs, labels, pipemarkers, tags and more on demand with this easy to use, industrial label printer. Brady s advanced touch-screen technology, powered by a Microsoft Windows CE ope system, makes producing professional labels fast and simple. Choose MarkWare Facility Identiﬁcation Software to expand your label-making capabilities. Pre-printed GlobalMark Brady printers can print from etap or SKM third-party software. Write-On Arc Flash GlobalMark Printer and BBP & Printer THTEL----DA THTEL-5---DA THTEL-6---DA THTEL----WA THTEL-5---WA THTEL-6---WA x x 6 x x x 6 x Pre-Printed Pre-Printed Pre-Printed Pre-Printed Pre-Printed Pre-Printed x x x.5 x x x.5 x x x.5 x x x If you own etap, SKM, or Easy Power software, you can print your arc flash labels directly from this software to your GlobalMark printer. Pre-printed BBP B ANSIDA B--595-ANSIDA B ANSIWA B--595-ANSIWA x 6.5 x x 6.5 x Vinyl Tape Vinyl Tape Vinyl Tape Vinyl Tape Brady Arc Flash templates also available to download at The GlobalMark Series and BBP printers are also ideal for: Brady s benchtop printers are also ideal for: Rating Plate Industrial Bar Codes General Identiﬁcation Wire & Cable Marking Raised Panel Pipe Markers Panel & Switch ID Right to Know Equipment Identiﬁcation Lockout / Tagout

4 Brady Stock Brady Make-it-Yourself Printing Systems Brady offers a variety of stock label formats. Basic warning and danger labels meet all OSHA and NFPA requirements, or for more complete accident prevention use write-on labels and fill in the appropriate hazard and safety information. Brady s Make-it-Yourself printing systems feature Brady s Performance dpi Thermal Transfer Printers optimized to print Brady Media and your Arc Flash labeling requirements. The printers are designed to be a convenient, flexible and cost-effective way to create, modify and print labels on demand. Arc Flash with Pre-printed Hazard Categories Q come with the hazard category and PPE requirements preprinted Q Write-in areas for speciﬁcs such as min arc, ﬂash protection boundary, etc. Q Flash Protection Boundary Hazard Incident Energy (cal/cm ) Flash Protection Equipment FLASH PROTECTION SHOCK PROTECTION Hazard Incident Energy (cal/cm) V- Arc-rated flash suit jacket, pants and hood (with arc-rated hard hat liner AN) (ear canal inserts) and leather work shoes or safety goggles Arc-rated flash suit hood or arc-rated face shield and arc-rated balaclava and safety glasses or safety goggles (ear canal inserts) and leather work shoes *Y567* # BRADYID.COM Y567 # BRADYID.COM Y567 x 6 Arc ﬂash hazard Learn more with our Arc Flash Whitepaper Download the Arc Flash ing Whitepaper to learn more details about compliance regulations, labeling standards, best practices and more. Download by visiting *Y567* 5 x 7 Arc ﬂash & shock hazard Hazard x 6 x 6 x 6 x 6 x 6 x 6 x 6 x 6 x 6 x Hazard COMP LY INCREA WITH NEW RE SE SAVE CO SAFETY AN GULATIONS, D ARC FL STS WITH PR ASH LA OP BELING ER By Dani elle Gallo, Prod Last upda uct Specialist, Brady ted: Dece Corporati mber, on Q Write-in areas for equipment-speciﬁc information like ﬂash protection boundary, hazard category, and required PPE. Q Hazard Incident Energy (cal/cm ) Hazard FLASH PPE x 6 Arc ﬂash hazard 79 Incident Energy (cal/cm) SHOCK PPE V- *Y567* # BRADYID.COM Y567 x 6 x 6 # BRADYID.COM Y567 *Y567* Arc ﬂash & shock hazard Brady s IP Thermal Transfer Printer is a new, smart solution for high-performance printing. The Brady IP Printer is a fully integrated, easy-to-use printer, material, and software system. Smart Cell technology allows the printer, materials, and ribbon to communicate with each other. The system offers material recognition, automatic formatting, and userfriendly printer features for labels, sleeves, and tags. The Bradyprinter PR Plus is a high performance, heavy duty industrial thermal transfer printer designed to last in industrial environments. For enhanced usability, the thermal transfer printer features an easy-to-read graphic and alphanumeric LCD menu display with a convenient navigator pad and a backlit graphic display for fast, easy access to menu options. The printer offers the barcoding and graphics features you need in a durable, high-volume printer that s easy to use. BP-IP BP-IP-C BP-IP6 BP-IP6-C IP-R6 Brady IP dpi Printer Brady IP dpi Printer with cutter Brady IP 6 dpi Printer Brady IP 6 dpi Printer with cutter Brady IP Printer Ribbon, Black BP-PR+ BP-PR+-PPR BP-PR6+ BP-PR6+-PPR BP-PR6+ BP-PR6+-PPR PR+-AutoCutter-FI mil clear polyester overlaminate sheets help protect handwritten data on vinyl labels from chemicals and abrasion. Sheets have an acrylic layﬂat liner x x 7.5 GlobalMark Printer BBP and Printer GlobalMark Color & Cut Printer GlobalMark MultiColor Printer GlobalMark Ribbon, Black/Orange GlobalMark Ribbon, Black/Red GlobalMark Ribbon, Black/Red/Orange/Blue BBP BBP-ARCFLASH-KIT BKIT-ARCFLASH-W B-R BBP & Printer BBP Printer w/ Arc Flash Supply Kit Arc Flash Supply Kit for BBP BBP Printer Ribbon, Black PR Plus dpi Printer PR Plus dpi Printer with Peel & Present PR6 Plus dpi Printer PR6 Plus dpi Printer with Peel & Present PR6 Plus 6 dpi Printer PR6 Plus 6 dpi Printer with Peel & Present PR+ Field Installable Cutter CU Pre-printed for IP and PR Plus Printers Protective Overlaminate for Write-on Create your own custom signs, labels, pipemarkers, tags and more on demand with this easy to use, industrial label printer. Brady s advanced touch-screen technology, powered by a Microsoft Windows CE ope system, makes producing professional labels fast and simple. Choose MarkWare Facility Identiﬁcation Software to expand your label-making capabilities. Pre-printed GlobalMark Brady printers can print from etap or SKM third-party software. Write-On Arc Flash GlobalMark Printer and BBP & Printer THTEL----DA THTEL-5---DA THTEL-6---DA THTEL----WA THTEL-5---WA THTEL-6---WA x x 6 x x x 6 x Pre-Printed Pre-Printed Pre-Printed Pre-Printed Pre-Printed Pre-Printed x x x.5 x x x.5 x x x.5 x x x If you own etap, SKM, or Easy Power software, you can print your arc flash labels directly from this software to your GlobalMark printer. Pre-printed BBP B ANSIDA B--595-ANSIDA B ANSIWA B--595-ANSIWA x 6.5 x x 6.5 x Vinyl Tape Vinyl Tape Vinyl Tape Vinyl Tape Brady Arc Flash templates also available to download at The GlobalMark Series and BBP printers are also ideal for: Brady s benchtop printers are also ideal for: Rating Plate Industrial Bar Codes General Identiﬁcation Wire & Cable Marking Raised Panel Pipe Markers Panel & Switch ID Right to Know Equipment Identiﬁcation Lockout / Tagout

5 Brady Stock Brady Make-it-Yourself Printing Systems Brady offers a variety of stock label formats. Basic warning and danger labels meet all OSHA and NFPA requirements, or for more complete accident prevention use write-on labels and fill in the appropriate hazard and safety information. Brady s Make-it-Yourself printing systems feature Brady s Performance dpi Thermal Transfer Printers optimized to print Brady Media and your Arc Flash labeling requirements. The printers are designed to be a convenient, flexible and cost-effective way to create, modify and print labels on demand. Arc Flash with Pre-printed Hazard Categories Q come with the hazard category and PPE requirements preprinted Q Write-in areas for speciﬁcs such as min arc, ﬂash protection boundary, etc. Q Flash Protection Boundary Hazard Incident Energy (cal/cm ) Flash Protection Equipment FLASH PROTECTION SHOCK PROTECTION Hazard Incident Energy (cal/cm) V- Arc-rated flash suit jacket, pants and hood (with arc-rated hard hat liner AN) (ear canal inserts) and leather work shoes or safety goggles Arc-rated flash suit hood or arc-rated face shield and arc-rated balaclava and safety glasses or safety goggles (ear canal inserts) and leather work shoes *Y567* # BRADYID.COM Y567 # BRADYID.COM Y567 x 6 Arc ﬂash hazard Learn more with our Arc Flash Whitepaper Download the Arc Flash ing Whitepaper to learn more details about compliance regulations, labeling standards, best practices and more. Download by visiting *Y567* 5 x 7 Arc ﬂash & shock hazard Hazard x 6 x 6 x 6 x 6 x 6 x 6 x 6 x 6 x 6 x Hazard COMP LY INCREA WITH NEW RE SE SAVE CO SAFETY AN GULATIONS, D ARC FL STS WITH PR ASH LA OP BELING ER By Dani elle Gallo, Prod Last upda uct Specialist, Brady ted: Dece Corporati mber, on Q Write-in areas for equipment-speciﬁc information like ﬂash protection boundary, hazard category, and required PPE. Q Hazard Incident Energy (cal/cm ) Hazard FLASH PPE x 6 Arc ﬂash hazard 79 Incident Energy (cal/cm) SHOCK PPE V- *Y567* # BRADYID.COM Y567 x 6 x 6 # BRADYID.COM Y567 *Y567* Arc ﬂash & shock hazard Brady s IP Thermal Transfer Printer is a new, smart solution for high-performance printing. The Brady IP Printer is a fully integrated, easy-to-use printer, material, and software system. Smart Cell technology allows the printer, materials, and ribbon to communicate with each other. The system offers material recognition, automatic formatting, and userfriendly printer features for labels, sleeves, and tags. The Bradyprinter PR Plus is a high performance, heavy duty industrial thermal transfer printer designed to last in industrial environments. For enhanced usability, the thermal transfer printer features an easy-to-read graphic and alphanumeric LCD menu display with a convenient navigator pad and a backlit graphic display for fast, easy access to menu options. The printer offers the barcoding and graphics features you need in a durable, high-volume printer that s easy to use. BP-IP BP-IP-C BP-IP6 BP-IP6-C IP-R6 Brady IP dpi Printer Brady IP dpi Printer with cutter Brady IP 6 dpi Printer Brady IP 6 dpi Printer with cutter Brady IP Printer Ribbon, Black BP-PR+ BP-PR+-PPR BP-PR6+ BP-PR6+-PPR BP-PR6+ BP-PR6+-PPR PR+-AutoCutter-FI mil clear polyester overlaminate sheets help protect handwritten data on vinyl labels from chemicals and abrasion. Sheets have an acrylic layﬂat liner x x 7.5 GlobalMark Printer BBP and Printer GlobalMark Color & Cut Printer GlobalMark MultiColor Printer GlobalMark Ribbon, Black/Orange GlobalMark Ribbon, Black/Red GlobalMark Ribbon, Black/Red/Orange/Blue BBP BBP-ARCFLASH-KIT BKIT-ARCFLASH-W B-R BBP & Printer BBP Printer w/ Arc Flash Supply Kit Arc Flash Supply Kit for BBP BBP Printer Ribbon, Black PR Plus dpi Printer PR Plus dpi Printer with Peel & Present PR6 Plus dpi Printer PR6 Plus dpi Printer with Peel & Present PR6 Plus 6 dpi Printer PR6 Plus 6 dpi Printer with Peel & Present PR+ Field Installable Cutter CU Pre-printed for IP and PR Plus Printers Protective Overlaminate for Write-on Create your own custom signs, labels, pipemarkers, tags and more on demand with this easy to use, industrial label printer. Brady s advanced touch-screen technology, powered by a Microsoft Windows CE ope system, makes producing professional labels fast and simple. Choose MarkWare Facility Identiﬁcation Software to expand your label-making capabilities. Pre-printed GlobalMark Brady printers can print from etap or SKM third-party software. Write-On Arc Flash GlobalMark Printer and BBP & Printer THTEL----DA THTEL-5---DA THTEL-6---DA THTEL----WA THTEL-5---WA THTEL-6---WA x x 6 x x x 6 x Pre-Printed Pre-Printed Pre-Printed Pre-Printed Pre-Printed Pre-Printed x x x.5 x x x.5 x x x.5 x x x If you own etap, SKM, or Easy Power software, you can print your arc flash labels directly from this software to your GlobalMark printer. Pre-printed BBP B ANSIDA B--595-ANSIDA B ANSIWA B--595-ANSIWA x 6.5 x x 6.5 x Vinyl Tape Vinyl Tape Vinyl Tape Vinyl Tape Brady Arc Flash templates also available to download at The GlobalMark Series and BBP printers are also ideal for: Brady s benchtop printers are also ideal for: Rating Plate Industrial Bar Codes General Identiﬁcation Wire & Cable Marking Raised Panel Pipe Markers Panel & Switch ID Right to Know Equipment Identiﬁcation Lockout / Tagout

6 Arc Flash Fact Sheet Brady Arc Flash Training Aids Categories & Personal Protection Requirements Promote awareness of the dangers associated with arc flash accidents and make sure your workers know how to protect themselves! Taken from NFPA 7E, Standard for Electrical Safety in the Workplace Hazard Required Flash Protection Equipment* Incident Energy cal/cm Hazard Longsleeve Shirt & Long Pants (natural ﬁbers) (as needed) Hazard (as needed) Hazard Hazard Hazard work live OSHA is citing for arc flash violations. Know the requirements! NFPA 7E Standard For Electrical Safety In The Workplace,. (C) Equipment ing Electrical equipment that is in other than dwelling units, and is likely to require examination, adjustment, servicing, or maintenance while energized, shall be ﬁeld marked with a label containing all the following information: () At least one of the following: Available incident energy with corresponding working distance, Minimum arc of clothing, Required level of PPE, and/or Highest Hazard/ (HRC) for the equipment. Q Laminated on both sides to stand up to industrial environments Q Full-color printing and eye-catching graphics for optimum visual impact each & electrical parts. For further information, refer to NFPA 7E, Standard For (cal/cm)! # $ % electrical parts. For further information, refer to NFPA 7E, Standard For # $ (cal/cm) & ' ' ( $ ) # # $ * ' ' ( $ ) # # $ Post signs and labels in the work area and near electrical equipment to boost awareness and compliance Q s and labels specify the personal protection equipment required for each arc ﬂash hazard category Q : BradyTuff B- rigid plastic, laminated graphics : Self-sticking B- polyester with overlaminate 5! # $ % # $ & Energy ' ' ( $ ) # present. # $ 5 *Arc Rating of PPE should correspond with the Hazard level and Incident Voltage-rated gloves and other shock protection may also be required when *working on exposed energized parts. See Table.7(C)(9) in the NFPA regulation. ' ' ( $ ) # # $ Q *Arc Rating of PPE should correspond with the Hazard level and Incident Energy present. Voltage-rated gloves and other shock protection may also be required when working on exposed energized parts. See Table.7(C)(9) in the NFPA regulation x.5 x 5 each Q Meets NFPA 7E.(A) requirements which mandate the use of a written permit when performing live electrical work Q -ply carbonless copy paper 997 NFPA 7 National Electric Code,.6 Flash Protection.5 x Permit Q Wear the proper protective gear when working on or near exposed energized electrical parts. For further information, refer to NFPA 7E, Standard For Electrical Safety In The Workplace. and long pants (natural fibers)! # $ * % # $. (cal/cm) N/A (cal/cm) ' ' ( $ ) # # $ % * ' ' ( $ ) # # $ * Front Q *Arc Rating of PPE should correspond with the Hazard level and Incident Energy present. Voltage-rated gloves and other shock protection may also be required when working on exposed energized parts. See Table.7(C)(9) in the NFPA regulation. Continued on back For more information visit: BE SAFE! De-energize and lockout equipment before service or maintenance. Back Q Ensure compliance and safety by providing each employee with their own arc ﬂash wallet card Card speciﬁes the personal protection equipment required for each arc ﬂash hazard category Made of laminated cardstock, two-sided printing 55 Y5 Brady Worldwide Inc. ALL RIGHTS RESERVED x () Arc ﬂash boundary. * Arc Rating of PPE should correspond with the Hazard level and Incident Energy present.voltage-rated gloves and other shock protection may also be required when working on exposed energized electrical parts. Highlights the common causes of arc ﬂash and provides safe work practices and personal protection equipment requirements 57 () Nominal system voltage. Switchboards, panelboards, industrial control panels, meter socket enclosures, and motor control centers that are in other than dwelling occupancies and are likely to require examination, adjustment, servicing, or maintenance while energized shall be ﬁeld marked to warn qualiﬁed persons of potential electric arc ﬂash hazards. The marking shall be located so as to be clearly visible to qualiﬁed persons before examination, adjustment, servicing, or maintenance of the equipment. Q. x. Card /pack USA Customer Service: Inside Sales: Canada Customer Service: Mexico Customer Service: Inside Sales: ext 77 Arc Flash Solutions Stock Make-it-yourself Solutions Training Aids Arc Flash Facts

Arc Flash Solutions STOCK LABELS MAKE-IT-YOURSELF SOLUTIONS TRAINING AIDS ARC FLASH FACTS.

Arc Flash Solutions STOCK LABELS MAKE-IT-YOURSELF SOLUTIONS TRAINING AIDS ARC FLASH FACTS www.bradyid.com/arcflash Brady Stock Labels Brady offers a variety of stock label formats. Basic warning and danger