Arc Flash Solutions STOCK LABELS MAKE-IT-YOURSELF SOLUTIONS TRAINING AIDS ARC FLASH FACTS.

Transcription

1 Arc Flash Solutions STOCK LABELS MAKE-IT-YOURSELF SOLUTIONS TRAINING AIDS ARC FLASH FACTS

2 Brady Stock Labels Brady offers a variety of stock label formats. Basic warning and danger labels meet all OSHA and NFPA requirements, or for more complete accident prevention use write-on labels and fill in the appropriate hazard and safety information. NEC-Compliant Labels Complies with NEC (see back page for information on NEC labeling requirements) Made of durable B-302 polyester with overlaminate to withstand harsh environments. 2"x4" Arc flash & shock hazard; table 3.5"x5" Text & pictograph NFPA 70E-Compliant Labels Complies with NEC and NFPA 70E (see back page for information on NEC and NFPA70E labeling requirements). Made of B-933 vinyl, which can be written on with a pen or marker. 2"x4" Arc flash & shock hazard; table 3.5"x5" Text & pictograph ARC FLASH & SHOCK HAZARD Appropriate personal protection equipment required (cal/cm 2 ) Category # BRADYID.COM Arc Flash And Shock Appropriate PPE Required Do not operate controls or open covers without appropriate personal protection equipment. Failure to comply may result in injury or death! (cal/cm 2 ) Category # Y *Y * Warning 100 labels/roll Warning 10 labels/pack Danger 100 labels/roll Danger 10 labels/pack Warning 100 labels/roll Warning 5 labels/pack Danger 100 labels/roll Danger 5 labels/pack Warning 100 labels/roll Warning 10 labels/pack Danger 100 labels/roll Danger 10 labels/pack Warning 100 labels/roll Warning 5 labels/pack Danger 100 labels/roll Danger 5 labels/pack Write-On Arc Flash Labels Write-in areas for equipment-specific information like flash protection boundary, hazard category, and required PPE. B-933 Vinyl can be written on with pen or marker. 4"x6" Arc flash hazard Arc Flash Labels with PrePrinted Categories Labels come with the hazard category and PPE requirements preprinted Write-in areas for specifics such as min arc rating, flash protection boundary, etc. B-933 Vinyl can be written on with pen or marker. 4"x6" Arc flash hazard 5"x7" Arc flash & shock hazards Warning 5 labels/pack Danger 5 labels/pack 5"x7" Arc flash & shock hazard Part # Header Quantity 9940 Warning 0 5 labels/pack 9942 Warning 1 5 labels/pack 9944 Warning 2 5 labels/pack 9949 Warning 2* 5 labels/pack 9946 Warning 3 5 labels/pack 994 Warning 4 5 labels/pack 9941 Danger 0 5 labels/pack 9943 Danger 1 5 labels/pack 9945 Danger 2 5 labels/pack Danger 2* 5 labels/pack 9947 Danger 3 5 labels/pack 9949 Danger 4 5 labels/pack Part # Header Quantity Warning 0 5 labels/pack 9946 Warning 1 5 labels/pack Warning 2 5 labels/pack Warning 2* 5 labels/pack Warning 3 5 labels/pack Warning 4 5 labels/pack Danger 0 5 labels/pack Danger 1 5 labels/pack Danger 2 5 labels/pack Danger 2*. 5 labels/pack Danger 3 5 labels/pack Danger 4 5 labels/pack 9945 Warning 5 labels/pack Danger 5 labels/pack Protective Overlaminate for Write-On Labels 1.5 mil clear polyester overlaminate sheets help protect handwritten data on vinyl labels from chemicals and abrasion. Sheets have an acrylic layflat liner. Size x x 7.5 Custom Printed Arc Flash Labels Brady also offers custom arc flash labels using your own label formats and company logos. Call or visit

3 Brady Make-it-Yourself Printing Systems Brady s Make-it-Yourself printing systems features Brady s Performance 300 dpi Thermal Transfer Printers optimized to print Brady Media and your Arc Flash labeling requirements. The printers are designed to be a convenient, flexible and cost-effective way to create, modify and print labels on demand. Brady IP Thermal Transfer Printer BradyPrinter PR Plus Printer Brady's IP Thermal Transfer Printer is a new, smart solution for high-performance printing. The Brady IP Printer is a fully integrated, easy-to-use printer, material, and software system. Smart Cell technology allows the printer, materials, and ribbon to communicate with each other. The system offers material recognition, automatic formatting, and user-friendly printer features for labels, sleeves, and tags. Pre-printed Header Labels Part # Description THTEL DA Pre-Printed Danger Header Labels 3 x 3 THTEL DA Pre-Printed Danger Header Labels 4 x 6 THTEL DA Pre-Printed Danger Header Labels 4 x 4 THTEL WA Pre-Printed Warning Header Labels 3 x 3 THTEL WA Pre-Printed Warning Header Labels 4 x 6 THTEL WA Pre-Printed Warning Header Labels 4 x 4 THTEP Raised Panel Labels 3 x 3.5 Brady's High Performance Thermal Transfer Printer for your cable identification needs. This industrial printer is ideally suited to print Heatex products, wire markers, and polyester labels. Use this wire printer where material has a long life expectancy. Printer Features: Easy-to-read graphic and alphanumeric LCD menu display with convenient navigator pad. backlit graphic display for fast, easy access to menu options Higher printhead heat settings for optimum print quality with Brady materials Software for your Brady Thermal Transfer Printer BradySoft Standard Software (part # BS0STND) gives you the power to design and print labels with ease and flexibility. Whether you need to print text, bar codes or graphic images, fixed or variable data, user defined or database driven. Brady Arc Flash templates also available to download at Brady s benchtop printers are also ideal for: Brady printers can also print from etap or SKM third-party software. Rating Plate Industrial Bar Codes General I.D. Wire & Cable Marking Raised Panel Labels

4 GlobalMark 2 Printer Create your own custom signs, labels, pipemarkers, tags and more on demand with this easy to use, industrial label printer. Brady's advanced touch-screen technology, powered by a Microsoft Windows CE operating system, makes producing professional labels fast and simple. GlobalMark Printer Options: GlobalMark Color & Cut Printer #7601 GlobalMark MultiColor Printer #7600 Prints in one color, multiple spot colors, blended colors and full process color Unit has an additional built-in cutter for cutting out characters and shapes Prints in one color, multiple spot colors, blended colors and full process color If you own etap, SKM, or Easy Power software, you can print your arc flash labels directly from this software to your GlobalMark printer. GlobalMark MonoColor Printer #7679 Prints one color on one color tape Pre-printed Header Labels Part # Description Labels 7669 Indoor/Outdoor White Vinyl Tape 2.25 x 100 ft Indoor/Outdoor White Vinyl Tape 4 x 100 ft Indoor/Outdoor White Vinyl Tape 3 x 100 ft Pre-Printed Red Stripe, Black/Red 2.25 x Pre-Printed Red Stripe, Black/Red 3 x Pre-Printed Red Stripe, Black/Red 4 x Pre-Printed Orange Stripe, Black/Orange 2.25 x Pre-Printed Orange Stripe, Black/Orange 3 x Pre-Printed Orange Stripe, Black/Orange 4 x Pre-Printed Yellow Stripe, Black/Yellow 2.25 x Pre-Printed Yellow Stripe, Black/Yellow 3 x Pre-Printed Yellow Stripe, Black/Yellow 4 x 6 Ribbon GlobalMark Ribbon, Black/Orange GlobalMark Ribbon, Black/Red GlobalMark Ribbon, Black/Red/Orange/Blue Software for your GlobalMark Printer Choose either MarkWare Facility Identification software (part # 20700) or the QuickLabel Application card (part # ) to expand your label-making capabilities. Brady Arc Flash templates also available to download at The GlobalMark 2 Series printers are also ideal for: Pipe Markers Panel & Switch I.D. Right to Know Equipment I.D. Lockout/Tagout

5 Brady Arc Flash Training Aids Promote awareness of the dangers associated with arc flash accidents and make sure your workers know how to protect themselves! work live Poster Pr ev en tin g Ar c Fl as h In ju ri es arc is a short circuit through air, one exposed live conductor that flashes over from to another, or to ground. Lightening is an example of a naturally occuring arc flash! flash Highlights the common causes of arc flash and provides safe work practices and personal protection equipment requirements Laminated on both sides to stand up to industrial environments Full-color printing and eye-catching graphics for optimum visual impact Arc flas h is extr eme ly dan gero us and can cau Never work live without se trau mat ic inju ry or management approval and dea th! a complete understandin g of the associated hazards and What are common caus es of arc flash? Placing a conductive object too close to a high-amp source of current Sparks (from dropping tools, racking breakers, replacing fuses, etc.) Equipment failure due to the use of substandard components, improper installation, or just normal wear and tear! safe work practices. Circuit breaker failure due to lack of maintenance or overuse of the reset function Breaks or gaps in insulatio n Dust, corrosion and other impurities on the surface of the conductor Tasks that may expose you to danger: Removing or installing circuit breakers and fuses Working on control circuits Cleaning starter buckets in an MCC Taking a voltage reading Applying safety grounds Throwing a circuit breaker Operating disconnect switches Installing conduits and bus duct switches Category DANG ER Poster LOCK ED OUT DO NOT REM OVE Category 1 Fire-Resistant Clothing Category 4 Flash Suit over Fire-Resistant Clothing Required Flash Protection Equipment* (cal/cm2) Category Safety in the Workplace. Required Flash Protection Equipment* (cal/cm2) Arc-Rated Longsleeve Shirt & Long Pants (Ear Canal 1 Inserts) Leather 4 Gloves & Leather Shoes 3 Arc-Rated Longsleeve Shirt &Work Long Pants 25 Arc-Rated Arc Flash Suit Jacket & Pants & Arc-Rated Hard Hat Liner (Ear Canal Inserts) 2 4 Arc-Rated Longsleeve Shirt & Long 40 Pants Arc-Rated Arc Flash Suit Jacket & Pants Arc-Rated Arc Flash Hood & Arc-Rated Hard Hat Liner (Ear Canal Inserts) * Arc Rating of PPE should correspond with the level and Voltage-rated gloves and other present. shock protection may also be required when working on exposed energized electrical parts. 0 Keep unqualified personne l outside of the flash protection boundar y. Keep equipment clean and free from dirt and corrosion. Avoid operating equipment at higher than the rated voltage. Be careful to avoid generating sparks. When in doubt lock it out! Poster. Arc Flash Categori Personal Protection Reqes & uirements Taken from NFPA 70E, Standard for Electrical How to protect yourself and others: Whenever possible, lockout equipment before service and maintena nce. Conduct a hazard assessm ent and follow approved safe work procedures. Wear appropriate protectiv e clothing and equipment (see chart). Use insulated gloves, tools, blankets and barriers. 1 x 24 Longsleeve Shirt & Long Pants (natural fibers) (as needed) Arc-Rated Longsleeve Shirt & Long Pants Arc-Rated Face Shield or Arc Flash Hood (as needed) Arc-Rated Longsleeve Shirt & Long Pants Arc-Rated Face Shield or Arc Flash Hood n/a 2* Sign & Label Y Post signs and labels in the work area and near electrical equipment to boost awareness and compliance Signs and labels specify the personal protection equipment required for each arc flash hazard category Sign: BradyTuff B-401 rigid plastic, laminated graphics, sold individually Label: Self-sticking B-302 polyester with overlaminate, available in 5 packs Label Wallet Card 10 x x 5 Sign. Label Wallet Card Ensure compliance and safety by providing each employee with their own arc flash wallet card Card specifies the personal protection equipment required for each arc flash hazard category Made of laminated cardstock, two-sided printing Available in 10 packs x 3.4 Card. Sign Work Permit Meets NFPA 70E 130.1(A) requirements which mandate the use of a written permit when performing live electrical work 2-ply carbonless copy paper 25 permits per pack 9927 Call or visit x 11 Permit.

6 work live Arc Flash Fact Sheet OSHA IS CITING FOR ARC FLASH VIOLATIONS. KNOW THE REQUIREMENTS! NFPA 70E Standard For Electrical Safety In The Workplace, (C) Equipment Labeling Equipment shall be field marked with a label containing the available incident energy or required level of PPE." NFPA 70 National Electric Code, Flash Protection Switchboards, panelboards, industrial control panels, meter socket enclosures, and motor control centers that are in other than dwelling occupancies and are likely to require examination, adjustment, servicing, or maintenance while energized shall be field marked to warn qualified persons of potential electric arc flash hazards. The marking shall be located so as to be clearly visible to qualified persons before examination, adjustment, servicing, or maintenance of the equipment. Arc Flash Categories & Personal Protection Requirements Taken from NFPA 70E, Standard for Electrical Safety in the Workplace. Category Required Flash Protection Equipment* cal/cm 2 ) 0 Longsleeve Shirt & Long Pants (natural fibers) n/a (as needed) 1 Arc-Rated Longsleeve Shirt & Long Pants 4 Arc-Rated Face Shield or Arc Flash Hood (as needed) 2 Arc-Rated Longsleeve Shirt & Long Pants Arc-Rated Face Shield or Arc Flash Hood (as needed) Category Required Flash Protection Equipment* cal/cm 2 ) 2* Arc-Rated Longsleeve Shirt & Long Pants & 3 Arc-Rated Longsleeve Shirt & Long Pants 25 Arc-Rated Arc Flash Suit Jacket & Pants & Arc-Rated Liner 4 Arc-Rated Longsleeve Shirt & Long Pants 40 Arc-Rated Arc Flash Suit Jacket & Pants & Arc-Rated Liner * Arc Rating of PPE should correspond with the level and present. Voltage-rated gloves and other shock protection may also be required when working on exposed energized electrical parts. For more information visit: AN ISO-9001 REGISTERED FIRM 2009 BRADY Corporation, Printed in U.S.A. All rights reserved. Specifications subject to change without notice. MS Rev 10/ West Good Hope Rd. Milwaukee WI,