Actuators AMV 655, 658 and 659 can be controlled by electronic controllers with 3-point output.

Transcription

1 Data sheet Actuators for three point control without safety function SU, SD with safety function (spring up/down) SD with EN certified safety function (spring down) Description Actuators can be used in combination with: - Valve types VFM, VFS (DN 65-00), VFG(S), VFU, VF (DN 00-50) and VL (DN 00). - Self-acting flow controller AHQM (DN 25-50), AFQM 6 and AFQM PN 25. Features: Manual operation either mechanical and/or electrical Position indication LED signalling Inverse function Selectable speed Pulse output signal (4, 5) Thermical and overload protection Precise regulation and fast response on -point signal (0,04s) Actuators are primarily designed to regulate valve in the respond to the demand of a controller in District Heating/cooling, Heating, Ventilating and Air conditioning systems. Actuators, 658 and 659 can be controlled by electronic controllers with -point output. Main data: Nominal voltage (AC or DC): - 24 V, 50 Hz/60 Hz - 20 V; 50 Hz/60 Hz Control input signal: point signal Force: 2000 N Stroke: 50 mm Speed (selectable): (4) or 6 s/mm Max. medium temperature: 200 C Please check power supply and power consumption prior connection! Ordering Actuator Picture Type SU SD SD * Not available yet Power supply (V) Code No G G G446* G447* G G G452* G45* Accessories - Stem heater Type DN Code No. Stem heater for VFM valves Accessories - Adapter Type Adapter VFG(S), VFU Adapter 2 VFG(S), VFU Adapter VFG(S), AFQM 6, AFQM PN Z Z7022 Code No. 065B B B527 DEN-SMT/SI VD.LE.S.02 Danfoss 0/20

2 Data sheet Actuators for three point control /658/659 Technical data Actuator type SD SU SD Power supply V 24 or 20 ; +0 5 % ; AC or DC Power consumption VA 4,4 (24 V) 6, (20 V) 9,2 (24 V) 5,7 (20 V) Frequency Hz 50/60 Control input -point 9,2 (24 V) 5,7 (20 V) 9,2 (24 V) 5,7 (20 V) Closing force N *N/A Max. stroke mm 50 Speed (selectable) s/mm or 6 4 or 6 4 or 6 *N/A Max. medium temperature 200 (50 with extension piece for VFGS) Ambient temperature C Storage and transport temperature (storing for days) Humidity 5-95% Protection class Grade of enclosure IP 54 Weight kg 5, 8,6 8,6 8,6 Safety function - Yes Yes Yes (EN) Spring return runtime s Manual operation Power failure response marking in accordance with the standards * Data not available yet Mechanical Stem remains in last position Electrical and mechanical Safety return function extracts Low Voltage Directive 2006/95/EEC EMC Directive 2004/08/EEC II Electrical and mechanical Safety return function retracts Electrical Safety return function extracts Low Voltage Directive 2006/95/EEC EMC Directive 2004/08/EEC Safety function according to EN 4597 Disposal The actuator must be dismantled and the elements sorted into various material groups before disposal. Before disassembly please contact Danfoss support for disassembly instructions. Commissioning Complete the mechanical and electrical installation (see instructions) and perform the necessary checks and tests: - Turn on the power - Set the appropriate control signal and check that the valve stem direction is correct for the application. The unit is now fully commissioned. 2 VD.LE.S.02 Danfoss 0/20 DEN-SMT/SI

3 Data sheet Actuators for three point control /658/659 Design. Manual operation knob 2. Function buttons. Service cover 4. Removable gland support 5. Position indication ring 6. Stem connector 7. Valve connector Installation Mechanical Please check what are allowed installation positions for the valve in combination. The actuator can be installed in all positions. Use M8/SW key (not supplied) to fit the actuator to the valve body. Allow for necessary clearance for maintenance purposes. To link valve and actuator stems use a 4mm Allen key (not supplied). The actuator has position indication rings which should be pushed together before el. connection; after self-stroking they indicate end positions of the stroke. Electrical Electrical connections can be accessed by removing the service cover. Four cable entries on removable gland support are provided for M 6,5 or M 20,5 cable glands. Note that in order to maintain the enclosure IP rating, appropriate cable glands must be used. DEN-SMT/SI VD.LE.S.02 Danfoss 0/20

4 Data sheet Actuators for three point control /658/659 Wiring Do not touch anything on the PCB! Do not remove the service cover before the power supply is fully switched off. Max. allowed current output on terminals 4 and 5 is 4 A. SN 0 V Neutral 24, 20 V AC/DC Power supply 4, 5 (AC) output Input /659 SN 0 V Neutral, 24, 20 V AC/DC Power supply 4, output 2 2 Input Recommended cross-sectional area of the wiring is.5 mm 2. 4 VD.LE.S.02 Danfoss 0/20 DEN-SMT/SI

5 Data sheet Actuators for three point control /658/659 LED signalling / actuator operating modes LED operating mode indicator The three-colour (green/yellow/red) LED function indicators are located on the actuator cover. They indicate different operating modes. RESET button (versions /659) Actuators /659 have external RESET button which is located on top cover of the actuator next to LED indicators. With this button you can enter or exit Stand-By mode (press once) See next paragraph for mode details. Operating modes Stand-By mode (versions /659) Press the RESET button to enter Stand-By mode. The actuator stops in current position and stops responding to any control signal. Red light is constantly lit. You can manually operate the actuator with mechanical handle (version /658) or control buttons (versions /659). This mode can be very useful during the commissioning of other equipment, or for service purposes. To exit Stand-By mode press the RESET button again. Positioning mode The actuator is operating automatically. The stem is extracting or retracting according to the control signal. When positioning is finished the actuator goes to Stationary mode. Stationary mode The actuator is operating without errors. Error mode Working temperature is too high - check the ambient temperature. Stroke is too short - check the connection with valve and valve operation or check if valve is blocked. LED indication for /658/659 LED Indication type Operating mode Actuator type Green Positioning mode - Actuator is retracting Yellow Positioning mode - Actuator is extracting Stationary mode - Actuator has reached upper end position (retracted stem) Stationary mode - Actuator has reached bottom end position (extracted stem) Flashing Stationary mode Red Stand - By mode Dark No indication Flashing Error Mode No power supply No control signal NOTE! LED signalling is a direct indicator of the signal from controller therefore lengths of LED indication can vary and sometimes even look like a short flash if the controlling signal is present for a very short period. Actuator type doesn t have constant power supply and operates only when the controller provides a signal. Therefore limited LED indication possibilities are available. DEN-SMT/SI VD.LE.S.02 Danfoss 0/20 5

6 Data sheet Actuators for three point control /658/659 DIP switch setting The actuator has a selection DIP switches (Fig. ) under the service cover. DIP: FAST/SLOW Speed selection - FAST position; (4) s/mm (see Tech. data) - SLOW position; 6 s/mm DIP2: / Direct or inverse acting selector (Fig. 2): - position; the actuator is direct acting to input signal. - position; the actuator is inverse acting to input signal. Fig. Fig. 2 Manual operation Mechanical and electrical operation are not allowed to be used at the same time! Actuator can be manually positioned and remains in selected position until it receives signal from the controller. Actuators can be manually positioned when in Stand-By mode or when there is no power supply (mechanically). Actuators can be manually positioned only in Stand-By mode. Actuator type Mechanical operation Electrical operation B A A B Mechanical manual operation Actuators /658 have a manual operation knob on the top of the housing which enables hand positioning of the actuator. Mechanical manual operation shall be only used when no power supply. Electrical manual operation Actuators /659 have two buttons on the top of the housing that are used for electrical manual positioning (up or down) if the actuator is in Stand-By mode. First press the RESET button until the actuator goes to Stand-By mode (red LED is lit). By pressing the upper button the stem will be extracted and by pressing the lower button will be retracted. 6 VD.LE.S.02 Danfoss 0/20 DEN-SMT/SI

7 Data sheet Actuators for three point control /658/659 Actuator valves combinations VFM 2 VF 2 (DN 00-50) VL 2 (DN 00) VFS 2 (DN 65-00) VF (DN 00-50) VL (DN 00) VFG(S) 2 + adapter: 065B525 (DN 5-65) 065B526 (DN 80-25) 065B527 (DN ) VFU + adapter: 065B525 (DN 5-65) 065B526 (DN 80-25) VFG + adapter: 065B525 (DN 25-50) 065B526 (DN 65-25) AHQM (DN 25, 50) AFQM 6 + adapter 065B527 AFQM PN 6 (DN 65-25) AFQM PN 25 + adapter 065B527 DEN-SMT/SI VD.LE.S.02 Danfoss 0/20 7

8 Data sheet Actuators for three point control /658/659 Dimensions Min VD.LE.S.02 Produced by Danfoss A/S 07/202