PrevaLED Troffer. Snap board feature allows for customizable lengths. Light is OSRAM.

Transcription

1 PrevaLED Troffer Snap board feature allows for customizable lengths The PrevaLED Troffer LED module family offers innovative solutions for a variety of LED troffer luminaires with its customizable snap module feature. Available in lengths of 47" and 44", these modules can be snapped in the middle to obtain 23.5" and 22" boards. With only two sizes, OSRAM PrevaLED Troffer can meet design needs for 1x4, 2x2 and 2x4 DLC luminaires. Available in both standard and premium, these high efficacy LEDs deliver even and diffused light. The modules consist of multiple high efficacy LEDs in a precise layout eliminating the need for supplemental heat sinking and delivering up to 182 lumens per watt in a variety of color temperatures including 3000K through 5000K. The LED modules reduce the need for multiple optical layers, simplifying the luminaire design and maximizing optical efficiency. These LED modules offer a long-life, energy-efficient, and economical alternative to linear fluorescent sources. The PrevaLED Troffer boards are designed for optimum performance when paired with OPTOTRONIC constant current power supplies for maximum system efficiency and life expectancy Key Features & Benefits Available in two sizes 47" and 44" and can be snapped to 23.5" and 22" Standard and Premium efficacy options Poke-in-wire staggered connectors prevents shadowing effect Operate on single or multichannel power supplies Delivers even and diffuse light with thermally independent design Four CCT Options (3000K, 3500K, 4000K and 5000K) within MacAdam 3-step ellipse Product Offering Service life greater than 60,000 hours (L 70 ) Reduces SKUs complexities Covers design needs for 1x4, 2x2 and 2x4 DLC luminaires Easy to install Compatible with dimming systems Does not require additional heat sinking Minimize maintenance due to long life Optimally paired with OPTOTRONIC constant current LED power supplies Item Dimensions Color Temperature PrevaLED Troffer Standard 44" 3000, 3500, 4000, 5000 PrevaLED Troffer Standard 47" 3000, 3500, 4000, 5000 PrevaLED Troffer Premium 47" 3000, 3500, 4000, 5000 PrevaLED Troffer Premium 44" 3000, 3500, 4000, 5000 Note: Snap boards midway to achieve 22" and 23.5" lengths. PrevaLED Troffer is not a DesignLights Consortium (DLC) qualified product. It is an OEM component that meets certain performance specifications that are geared toward meeting DLC Standard Tier (v4.0) in a fully assembled fixture. The customer is liable for proper design, manufacturing, testing and qualification according to DLC requirements Application Information Applications Education Office Retail Specifications and Certifications The OSRAM PrevaLED Family is UL8750 Recognizedfor US and Canada Class 2 Units (UL File# E320662) Light is OSRAM

2 Ordering Information Nom. Input Operating Current* Wattage* Item Ordering Lumens Nom. Voltage Nom. Max. Nom. Max. Dim* Case Number Abbreviation (lm)* LPW (V) (ma) (ma) (ma) (ma) CCT CRI (in) Qty PLTSG1-Lin x , K 80 44" x 0.71" PLTSG1-Lin x , K 80 44" x 0.71" PLTSG1-Lin x , K 80 44" x 0.71" PLTSG1-Lin x , K 80 44" x 0.71" PLTSG1-Lin x , K 80 47" x 0.71" PLTSG1-Lin x , K 80 47" x 0.71" PLTSG1-Lin x , K 80 47" x 0.71" PLTSG1-Lin x , K 80 47" x 0.71" PLTPG1-Lin x , K 80 44" x 0.71" PLTPG1-Lin x , K 80 44" x 0.71" PLTPG1-Lin x , K 80 44" x 0.71" PLTPG1-Lin x , K 80 44" x 0.71" PLTPG1-Lin x , K 80 47" x 0.71" PLTPG1-Lin x , K 80 47" x 0.71" PLTPG1-Lin x , K 80 47" x 0.71" PLTPG1-Lin x , K 80 47" x 0.71" 100 *Snapping Notes: When the board is divided mid-way to use as a 2ft board, please consider the below impact to specifications Voltage and LPW specifications remain the same Lumens, current limits and power limits are halved Notes: 1. All data is related to the entire module. Data reflects statistical mean values. Actual data may differ depending on variances in the manufacturing process. 2. Performance values were taken at steady state. Instant-on measurements may be higher. 3. Recommended for indoor use. 4. Tolerance for flux data is ±7%, LPW ±10% 5. Nominal rating at board Tc of 35 C (± 5 C) Ordering Guide PL T S G1 - Lin x18 Product Family Troffer Type Generation Shape Lumen CRI CCT Dimensions PrevaLED S = Standard Linear Output >80 50=5000K (mm) P = Premium UL Information Product Name - UL Description Item Numbers LE/5570/0120/1118/ , 58131, 58132, LE/9080/0120/1118/ , 58135, 58136, LE/5570/0120/1194/ , 58139, 58140, LE/9080/0120/1194/ , 58143, 58144, Minimum and Maximum Ratings Parameter Values Operating Temperature at Tc point -20 C to 85 C Storage Temperature Range -40 C to 100 C Notes: 1. Exceeding maximum ratings may damage the LED light engine and cause potential safety hazards 2. Elevated operating temperatures can be expected to negatively impact the service life in terms of lumen output 3. Incorrect wiring may damage the LED light engine Power Supply Information The PrevaLED Family of LED modules are optimized for use with OPTOTRONIC single channel constant current LED Power Supplies. For more information about the models please refer to

3 Assembly Diagram PrevaLED Troffer Standard 1118x18 PrevaLED Troffer Standard 1194x18 PrevaLED Troffer Premium 1118x18 PrevaLED Troffer Premium 1194x18 Wiring Diagram Parallel Daisy Chain Connection Parallel Connection LED Driver LED Driver Notes: 1. Always ensure the load is within the power supply rating for current, voltage and wattage 2. Connecting LED modules in series may exceed Class 2 limits 3. The LED modules are UL Class 2 rated and therefore cannot be powered using non-class 2 LED drivers 4. The number of LED modules that can be connected in parallel depends on power supply output specification 5. The maximum number of LED modules that can be Daisy Chained (Parallel Daisy Chain Connection) is 1 Product Labeling and Traceability Each 4ft LED module has two labels of each type (total 4) attached on the front side for traceability. The duplicate labels are available to ensure that traceability is available when the boards are snapped mid-way. Product Description Label Serial Number Label Item Number/NAED Maximum Current Serial Number Assembly Number Max 300mA 13253B0001H2 AA CRI 3000K- Color Temp. Color Temp. Symbol Serial Number

4 Snapping Instructions The LED modules listed in the Ordering Information table can be snapped mid-way to fit an application fixture. Please consider the below practices when handling the LED modules. Recommended Step 1: Find a solid and clean surface (working table, bench, tool box cover) suitable to support the light engine. Step 2: Align the perforated line (mouse bites) found in the center of the PCB against the edge of a supported surface. Step 3: Press the overhanging section of the light engine down as close as possible to the perforated line. Not Recommended Keep your fingers away from the LEDs to avoid damage due to Electro Static Discharge (ESD). X Solder joints and electronic components are sensitive to stress caused by an improper support while the boards are being separated. X

5 Safety Information WARNING: ONLY QUALIFIED PERSONNEL SHOULD PERFORM INSTALLATION. TO AVOID ELECTRICAL SHOCK OR COMPO- NENT DAMAGE, DISCONNECT POWER BEFORE ATTEMPTING INSTALLATION OF THE POWER SUPPLIES AND/OR MODULES. Failure to install the power supplies and/or LED modules in accordance with the National Electric Code (NEC), all applicable Federal, State and local electric codes as well as the specific Underwriter s Laboratories (UL) safety standards for the installation, location and application may cause serious personal injury, death, property damage and/or product malfunction. 1. The LED module itself and all its components may not be mechanically stressed. 2. The LED module needs to be mounted on a heat sink providing adequate thermal dissipation. 3. Do not damage or destroy conducting paths on the circuit board. 4. The LED module is to be operated with Class 2 constant current control gear only. Not suitable for operation with line voltage. 5. The LED module cannot be operated safely when the housing is mechanically damaged. 6. For optimal cooling a thermal interface material should be applied between LED module and heat sink. 7. The LED module should be mounted to a heat sink with screws. Maximum tightening torque for mounting screws needs to be observed as excessive force may damage the housing. 8. Installation of LED module needs to be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installation. 9. Damage by corrosion will not be honored as materials defect claim. It is the user s responsibility to provide suitable protection against corrosive agents, such as moisture, condensation and other harmful elements. The module is intended for use in dry and damp locations only. 10. Pay attention not to exceed the maximum operation temperature of 85 C at the Tc point when the modules are used in an enclosed environment. 11. The design of the housing/luminaire should be according to the IP standards applicable for the intended application. Assembly Information 1. The modules need no supplemental heat sinking when the temperature at the Tc Point is maintained at or below 85 C. Service life when the Tc temperature is maintained is 60,000 hours/l 70. When the environment is unknown, the modules should be installed in luminaires designed to provide proper thermal management to avoid premature failure of the product and to obtain expected service life. Service life (i.e. lumen depreciation) is primarily a function of LED temperature, which is to be monitored on the circuit board at the designated Tc Point. 2. Due to variations in fixture designs, there is no exact installation prescription for obtaining an appropriate Tc Point temperature. In general, the modules should be adhered to a flat metal surface which has enough surface area to transfer the heat from the LEDs to the surrounding air. In some cases, the metal surface can be part of the mass of the fixture itself. 3. It is important to understand that once heat is transferred to a heat sink that heat must still be allowed to escape the system. A heat sink transferring the thermal energy to the inside of an enclosed cavity may ultimately be of little use. 4. Tc Point temperature measurements should be taken with the modules operating at thermal equilibrium in potential fixture designs installed in an appropriate environment. Tc Point temperature can be measured with a standard thermocouple in direct contact with the circuit board at the Tc Point or with ML4C Series non-reversible OMEGALABELS ( or equivalent. 5. OSRAM recommends using #8 (4mm), pre-drilled screws with a head clearance 0.44" (11.2mm) diameter for securing the PrevaLED Troffer LED modules. 6. Recommended input and board to board connections: Use AWG solid core wire with a strip length of 7-9mm. Use direct push-in of solid conductors. Wires can be released by twisting and pulling the wire simultaneously. 7. Use direct push-in of solid conductors. Wires can be released by twisting and pulling the wire simultaneously. Warranty OSRAM LED products are covered by our, OPTOTRONIC Power Supply or Control warranty. The is covered under warranty as long as the temperature at the Tc point does not exceed 85 C; exceeding this temperature will void all warranties. For additional warranty information or to download the warranty registration form visit Module Warranty: 3 years System Warranty: 5 years

6 OSRAM SYLVANIA Inc. 200 Ballardvale Street Wilmington, MA USA OSRAM, OPTOTRONIC and PrevaLED are registered trademarks of OSRAM GmbH. All other trademarks are those of their respective owners. Specifications subject to change without notice OSRAM SYLVANIA Inc. LED-DS