APR64(Rackable) APR64P (Portable)

Transcription

1 APR64(Rackable) APR64P (Portable) Digital Fault Recorder Sequence Event Recorder Trend mode Recorder - Up to 96 analog and 1536 digital channels - Accuracy: 0.1%, sampling rate 6400Hz - Storage in internal memory (8Gb expandable to 32Gb) and/or external FTP server - High speed communication with 100BaseT Ethernet (TCP/IP) - LED and relay outputs - Low, high and relative thresholds for each measured and/or calculated figure. - Power (P,Q,S), cos j, tan j and frequency - Trend mode recording: RMS Values, harmonics, power - Time synchronization: internal, NTP,IRIGB, IRIGJ, GPS 1pps - Powerful application software APRWIN64 - Display of all calculated values: curves, RMS, Cos, Tan, Power - Measure of values with 2 cursors - Zoom in and out, choice of scales, choice of colours - User defined templates - Harmonics, phasors - Voltage and current symmetrical components - Compliant with COMTRADE - Export to EXCEL or WORD Trend mode Vectors and power

2 Product overview Front APR64 DFR is equipped with LED indicating its status (recording, time synchronization) Acknowledge button for new event, storage full... USB2 for connection with external USB Key Rear APR64 is equipped with racks for a modular configuration - 1 power rack: 48VDC or 127V/230V AC/DC Up to 3 relay racks (alarm ) Up to 7 digital racks Up to 3 optical fiber racks to connect BFOP3 and Digital Remote Unit (DRU) 1 IRIGB time synchronization rack 1 Input/output synchronization rack APR64 Rear view DRU / Remote digital unit A Digital Remote Unit could receive up to 256 digital channels. DRU Rear View Local or Remote Analog channels APR64 can be equipped with up to 12 analog racks (700V, 70V, 50A, 4-20mA ) Duplex optical fiber Units can be installed near the measured signals. Optical fiber provides: perfect insulation lower cost than copper cables Voltage and current Each unit measures 8 channels (voltage or currents) Remote Analog channels Optical fiber is multimode 62.5/125 duplex Example of printing of trend mode

3 Example Time synchronisation Satellite receiver (1pps) IRIGB signal IRIGJ signal (RS232) NMEA signal RS232 (GARMIN GPS) NTP (Ethernet) RS232, Ethernet 100baseT/100BaseFL Modem RTC/RNIS/ADSL Current Voltage (8 channels) PC under Windows with APRWIN64 software Current Voltage (8 channels) Analog measurements Current Voltage 12 measurement hardware channels Multimode Optical fiber duplex 62.5/125 Up to 500meters 1 hardware channel = digital channels - 8 analog channels - 7 analog channel + 16 digital channels 4 / 8 or 12 programmable alarm relay outputs APR64 equipped with direct analog input Analog & digital measurements 7 analog+ 16 digital DC Voltage 24V to 150V DRU (Digital Remote Unit) 128 or 256 digital channels APR64-P Portable unit with connection for current clamp & flex

4 Technical specification Power supply 48VDC +/- 20% or 127VDC/220VDC/110VAC/230VAC +/- 20% Insulation resistance: > 100MΩ Insulation in common mode per IEC255-5: 2,5kV RMS Oscillations per IEC A: 2,5kV Disturbance conducted per IEC A: 10V/m Acceptable overvoltage per IEC : CM 4kV DM 2kV Acceptable transcient voltage per IEC A: CM 4kV DM 2kV Electromagnetic emissions per EN Classe A Environnement and safety Operating temperature : 5 to 55 C Storage temperature: -25 C to 70 C per CEI Humidity 93%. Relative humidity: + 40 C w/o condensation per CEI Vibration per IEC : 4,9m/s 2 Electrostatic discharge per IEC level A Class 4 Radiating electromagnetic field per IEC Class 3: 10V/m Waste and lead per CE Safety per CEI Input/output (RS232, Ethernet) Insulation >100MΩ Insulation in common mode: 1kV RMS Acceptable fast transcient voltage per IEC : CM 2kV Direct analog input or remote analog input (BFOP3) Input range: 700V, 70V, 50A, 0-100mA Accuracy: 0.1% of full scale Resolution: 24 bits Insulation in common mode per IEC255-5 : 5kV RMS Oscillations per IEC A : 5kV Acceptable overvoltage per IEC A : CM 4kV DM 1kV Acceptable transcient voltage per IEC A : CM 4kV DM 2kV Measurement methods Measurement methods per CEI : Class A Measurement of harmonics per CEI : 0.5% Class A Flicker per CEI Quality measurement per EN50160, CEI , CEI COMTRADE files In standard compliant reading per C In standard compliant reading/writing per C Relay output 250VRMS 5A AC (resistive load) 110V 0,5A DC Insulation in common mode per IEC255-5 : 2,5kV RMS Oscillations per IEC : 2,5kV Acceptable overvoltage per IEC : CM 4kV Acceptable fast transcient voltage per IEC : CM 2kV Output power 12V 400mA Insulation in common mode per IEC255-5 : 2,5kV RMS Protected by limitation of current Digital input 48V to 150V DC or 24V to 150VDC Insulation resistance >100MΩ Insulation in common mode per IEC255-5: 2,5kV RMS Oscillations per IEC A : 2,5kV Acceptable overvoltage per IEC A : CM 4kV DM 1kV Acceptable transcient voltage per IEC A : CM 2,5kV DM 1kV APR64 unit packed in Flightcase APR64 mounted in 19" cabinet

5 Example of a graph (DFR mode):

6 Example of a graph (DFR mode):