Microplate Readers INSTRUMENTS. Description Catalog # Description DAR800 SF2100 SF4700

Transcription

1 Microplate Readers DAR800 As a stand-alone Microplate reader, the DAR800 is designed for applications within the clinical, biotechnology and research areas. The onboard data reduction surpasses many computer software packages with its extensive curve fitting, cutoff calculation, data transformation and validation capabilities. The DAR800 interfaces with Diagnostic Automation Data Analysis Software for even more flexibility in data analysis and reporting. Detection Method: Absorbance CE certified. Read method: Endpoint Kinetic and well area scanning via computer control. Microplate types: 6-, 12-, 24-, 48-, 96-well microplates 384- and 60/72/96-well Terasaki plates (NB Option)* different model. Light Source: Tungsten Halogen, Wavelength selection: Filters Wavelength range: 400 to 750nm 340 to 750nm (UV option) Dynamic Range: 0 to 3.0 OD, Resolution: OD Filters Supplied: 4 filters (5 with UV option), Reading Speed: 30 secs single wavelength, OD Accuracy: <1% at 2.0 OD typical OD Repeatability: <0.5% at 2.0 OD typical, OD Linearity: <1% at 2.0 OD typical, <3% at 3.0 OD typical, NRTL and CE Certified. SF2100 The Stat Fax 2100 Microplate Reader is fully automatic., Bichromatic optics. Standard model includes four filters; six filters are available for a nominal charge. On board data reduction calculations include regressions, curve fitting and cut-off absorbance calculations with step-by-step user prompting. Large, non-volatile memory stores at least 50 user tests. Includes parallel and serial outputs. Operates with or without a computer. A bi-directional accessory is available for linking to IBM compatible computer. NRTL and CE certified. The Stat Fax 4700 Microstrip Reader, PHOTOMETRIC Linear Measurement Range: 0.0 to 3.0 Absorbance units (A). Photometric Accuracy: A +/- (1% of the reading A). >1.0A +/- (2% of the reading A). Stability: Light Source: Standard Wavelengths: Drift of no more than 0.005A in 8 hours/bichromatic. Tungsten-Xenon lamp with lamp saver feature. Standard: 405, 450, 492, and 630nm. SF VIS: 405, 450, 492, 545, 600, and 630nm. 6-UV: 340, 405, 450, 492, 545, and 630nm. Alternate filters available from 340 to 880nm. Filter Type: Vessel: IAD hardcoat interference, 10nm half bandpass. Single or break-apart strip up to 12 wells long. 3-strip loading capacity. 1

2 Microplate Readers The Stat Fax 4200 is a compact, standalone 8- channel microplate reader. It s streamlined designed offers touch screen interface, rapid reading, superb optics, onboard curve-fitting software, and built-in printer to meet the requirements of modern laboratories. SF4200 Linear Measurement Range: 0.0 to 4.0 Absorbance units (A). Photometric Accuracy: +/- 1%. Stability: Drift of more than A in 8 hours. Light Source: Remove halogen lamp source with lamp saver feature. Wavelengths: Standard: 405,450,492 and 630 nm. Filter options from 405nm to 700nm. Filter Type: IAD hardcoat interference, 10nm half bandpass. Vessel: Standard 96-well microtiter plates, or Strip trays. MPL1 The MPL1 Microplate Luminometer is an affordable but high quality instrument with basic functionality. It incorporates all-important functions necessary to perform glow luminescence measurements and it is suitable for all applications, which require a very high dynamic range, but not extremely high sensitivity. Due to the concentration on the little critical functionality, the instrument is available for a very attractive price. CE certified. LumiStat, the first CLIA micro strip reader, brings this technology to any size lab. LumiStat is an open system, allowing users to program a wide variety of glow-type CLIAs. Test names and parameters are stored in a large on-board memory for easy recall. CE certified. Detection Mode, Glow luminescence Vessel, Single, double, or break apart strips, up to 12 wells, 36 well loading capacity Plate Format: Common strip carrier can hold three 12- well strips or three 8- well strips Lumi Cross talk Less than 2.5 x 10-4 Detector Photomultiplier (PMT) Spectral Response Range: nm Peak Wavelength: 400 nm Sensitivity/Detection limit: HRP1x10-18, ALP1x10-21 Linear Dynamic: -21ALP 1x10, other tests pending 2

3 Microplate Washers DAI recognized leadership in full-plate Microplate washers extends to the DAW50 Auto Strip Washer. The DAW50 compact footprint contains a powerhouse of washing capabilities unsurpassed in its class. The washer s excellent dispense accuracy and evacuation efficiency supports 96- and 384- well strip or plate washing. Comprehensive and easy-to-use onboard software provides the utmost flexibility for a variety of applications. CE certified. Microplate Types: All flat-bottom 96-well plates, 384-well flat-bottom plates 1 x 8 flat-bottom strips (16-channel),All 96-well plates, 1 x 8 strips (8-channel) DAW50 All 96-well plates, 1 x 12 strips (12-channel) Mainfold Type: 16-channel patented Dual-Action, with separate dispense/aspiration (16-well), 8-channel aspiration/dispense (8-channel), 12-channel aspiration/dispense (12-channel) Washing Speed:3 asp./disp. Cycles: < 250 second (100 μl/well, 384 wells) > 105 second (300 μl/well, 96 wells) Volume Range: 25 to 3000 μl, Soak Time: 1 to 600 seconds Power: 100 to 240 VAC, 50 to 60 H SF2600 The Stat Fax 2600 Microplate Washer is fully automatic. Washes flat, round, V-bottom plates and strips. No user adjustments required. Automatic calibration, alignment, and last row detection. Large, non-volatile memory stores at least 50 user wash protocols, precision operation with constant monitoring of vacuum and pressure. Pump cycles only when necessary for quiet operation. Programmable automatic rinse cycle. Ready to run: bottles, aerosol shield, 8-way manifold included. 12 and 16 position wash heads available as accessories. NRTL and CE certified. 3

4 Incubator / Shaker SF2200 The Stat Fax 2200 Incubator / Shaker holds two 96 well microplates. Digitally controlled 8-speed shaker with orbital mixing from 575 to 1500 rpm. Temperature adjustable from ambient to 40 C with resolution of 0.1 C. Digital timer controls shaking or can be operated independently as a timer. Compact and easy to operate. The outer tinted cover provides further insulation and protection from light. NRTL and CE certified. Chemistry Analyzer SF3300 The Stat Fax 3300 is designed for the biochemistry processes, tube method immuno assays, and drug assays from human serum, plasma, or urine. The design of the instrument includes many features to minimize operator error, such as stable factory calibration, automatic zeroing, complete operator prompting, detailed labeling, pre-programmed calculations, visual and audible feedback, flags and error messages, and minimal maintenance requirements; and user-friendly features such as the print on demand feature in Rate Mode. CE certified. Stability: Drift of no more than A in 8 hours Tube of Cuvette: -0.2 to -2.5 absorbance Filter Types: Ultra Long Life Multiple Cavity IAD hard Coat Processor: z180,program Memory: 1 Megabit RAM:32K Byte, Iluminated Volume: 21 Ul Aspiration Volume: Programmable 250Ul-750Ul Optional External Heat Block: 18 Wells, Controlled C Optional Read Cell Cooling: Peltier Cooling System-Cell Only. The Stat Fax 4500 is a compact, standalone chemistry analyzer. Its streamlined designed offers touch screen interface, rapid reading, superb optics, onboard curve-fitting software and built-in printer to meet the requirements of modern laboratories. CE Certified SF4500 Linear Measurement Range: 0.0 to 3.0 Absorbance units (A). Photometric Accuracy: +/- (1% of the reading A). Stability: Drift of no more than 0.005A in 8 hours/bichromatic. Light Source: Tungsten lamp with lamp saver feature. Standard Wavelengths: 340,405,505,545,580 and 630 nm. (alternate filters available from 340 to 700nm. Filter Type: IAD hardcoat interference, 10nm half bandpass Tube Size: 12mn round tube is standard. Read cell accommodates square cuvettes. Minimum sample volume: 1 ml for 12mm round tube. 250 µl for flowcell. 4

5 URS-InstaScan CD720P The CD720 Plus is a semi-automatic analyzer that is ideal for medium and large laboratories. It is capable of continuous testing allowing 500 tests per hour. It is user-friendly design and with touch screen navigation. CE certified. Test parameters: Glucose, Urobilinogen, Bilirubin, Ketone, Specific Gravity, Blood, ph, Protein, Nitrate and Leucocytes. Test principle: Dual wavelength with cold light source reflection Wavelength: 550nm, 620nm, and 720nm Type of Urine Strip: All URS Strip type formats Throughput: 720 test/ hour Speed: 5 sec/strip Printing format: Thermal Printer External printer: Parallel Port Display screen: LCD 320mm x 240mm, Touch Screen functionality. Memory capacity: Interface format: Unit selection: 2000 test results ASCII (RS232) connection with PC C1 (Conventional with number), C2 (Conventional with symbol), S1 (English S.I with number), S2 (English S.I with symbol) Dimension: 350mm x 380mm x 182mm Weight: 10kg Temperature: 10 C - 35 C Humidity: less than 95% Power source: Input AC 220V, 50Hz; or AC 110V, 60Hz Output DC 9V, 4A ID Functionality: Operator and ID Functionality URI-InstaScan (New) CD101 The CD101 analyzer is a portable, bench top analyzer for reading the manufacturer urine reagent strips. Training for this instrument is not required or necessary. Multiple urine strip types can be used with this analyzer specifically for the URS-2P, URS-4S, URS-5K, URS-6, URS-7, URS-8, URS-9, URS-10. Test Principle: Super-high cold light source reflecting Test Parameters: Glucose, Urobilinogen, Bilirubin, Ketone, Specific Gravity, Blood, PH, Protein, Nitrate and Leucocytes Throughput: 60 tests / hr. Testing time: 60 seconds Printing Format: Thermal Printer Display Screen: LCD Memory Capability: 1000 Test Results Interface: ASCII (RS232) Dimensions: 210mm x 151 mm x 113 mm Weight: 2 Kilograms Power source: AC 220V,50Hz; AC 110V, 60Hz Patient ID Capable, LIS Capable 5