7310 and 7315 Glossary of Icons. Operating Manual

Transcription

1 7310 and 7315 Glossary of Icons Operating Manual

2 Glossary of Icons Mode ICON Description Back key Tick icon - Done/yes Cross icon Cancel/no Printer icon - Print/open printer settings No results to send to printer Computer icon - RS232 serial port for connection to an external serial printer or a computer English No results to send to RS232 English icon - Language selection USB memory stick Save method/result Load method/result Result already saved to USB memory stick Single method save icon 1 48 method save icon Single method open icon 1 48 method open icon Axis icon View the result graphically ABC icon View the results as a text file Arrow icon - Results page down, move left, decrease Arrow icon - Results page up, move right, increase

3 Arrow icon Move down, decrease Arrow icon Move up, increase Calibrate to zero icon Pencil icon - Select letter/number Eraser icon - Delete letter/number AB icon - Change letter case/number Delete Method icon opens method selection screen Units icon opens unit selection screen Resolution 400nm ABS/%T Wavelength Abs/%T icon - Operating mode either absorbance or % transmittance Lamp cold Lamp save Caution icon accompanied by error code Check number Stop icon accompanied by error code Main Menu Opens concentration measurement mode Main Menu Opens kinetics measurement mode

4 Main Menu Opens photometrics measurement mode Main Menu Opens quantitation measurement mode Main Menu Opens spectrum measurement mode Main Menu Main Menu Time & Date Time & Date Time & Date settings Time/date icon Clock icon - Set time Calendar icon - Set date Toggle icon Switches date format icon - Opens autolog menu Printer icon - to printer USB icon - to USB memory stick Computer icon - to computer or external serial printer through RS232 serial port Sample icon - Number of sample measurement repetitions Timer icon - Time interval between each sample measurement repetition Batch ABC icon - Set batch name for repeated measurements Batch append add existing results Batch delete overwrite existing results Closed padlock icon - locked

5 Photometrics Photometrics Open padlock icon unlocked Methods unlocked method selection menu enabled Methods locked method selection menu disabled Security code Mode selection Mode shown Mode not shown User ID Contrast Lamp save Measure sample Toggle icon switches between ABS/%T menu Measure to a factor Measure to a standard ABS Calibrate to zero absorbance Calibrate to a standard Calibrate to zero absorbance or standard Factor menu Standard menu 001 Resets standard or factor value to one

6 Check standard Scan settings menu Hand icon Manual y-axis scaling Hand icon with cross through it - Auto y-axis scaling Scan interval Baseline scan Baseline scan in progress Scan sample Sample scan in progress Peaks and valleys threshold turned off Peaks and valleys above threshold 5% are shown Peaks and valleys table Show peaks only Show valleys only Spectral points analysis Double less than icon- decrease the wavelength by 10 times scan interval Single less than icon - decrease the wavelength by 1 times scan interval Double greater than icon - increase the wavelength by 10 times scan interval Single greater than icon - increase the wavelength by 1 times scan interval

7 Wavelength icon - manually enter the wavelength Add points to the spectral points analysis table View spectral points analysis table Data point interval used in print setup Measure sample table Opens quantitation table Number of standards View standard curve Curve fit enables the curve fit to be adjusted Sigma icon Displays curve statistics Create new standard curve Tick icon - Read Standard Back icon Re-measure previous standard Cross icon Cancel creation of new standard curve Curve statistics used in print setup menu Hand icon Manual y-axis scaling Hand icon with cross through it - Auto y-axis scaling Start time pause Opens lag time/start on level menu 0000s Resets lag time, standard or factor values to one Clock icon - Set the lag time

8 ABS/%T icon - Set the start on level Greater than - Start above Less than - Start below No start on level set Start kinetics measurement measurement in progress Sigma icon - Post measurement statistics moving line Update factor in settings Toggle icon switches between the initial and final point lines Double less than icon - Decrease the time by 5 seconds intervals Single less than icon - Decrease the time by 1 second intervals Double greater than icon - Increase the time by 5 seconds intervals Single greater than icon - Increase the time by 1 second intervals Data point interval used in print settings No single cell - Method created on a unit with a single cell accessory fitted 8 cell turret icon the automatic 8 cell turret is in use Error finding cell position 0 on turret

9 No turret - Method created on a unit with a turret accessory fitted C Degrees Celsius F Degrees Fahrenheit Peltier accessory in use current temperature is below set point. The current temperature is displayed above set point temperature No peltier - Method created on a unit with a peltier accessory fitted Sipper pump in use running in forward direction Sipper pump in use running in reverse direction Timed sipper pump Timed sipper pump calibration sequence Start sipper pump enables take up time to be set Skip take up time uses the previously set take up time sets air gap to one Stop sipper pump Reduce sample uptake/reduce air gap Increase sample uptake/increase air gap No sipper - Method created on a unit with a sipper accessory fitted Sipper peltier pump in use No sipper peltier - Method created on a unit with a sipper

10 peltier accessory fitted PC comms - shown when the instrument is connected to a PC and communicating via the PC software Error Spanner refer to section 13

11