Timer, Counter & Display
|
|
|
- Austin Cannon
- 6 years ago
- Views:
Transcription
1 Timer, Counter & Display Quick Selection Guide Category Front Panel Size Pin Type Mounting Type Model No. Counter/Timer Dual use 72X72 - Flush mounting type KCT-72 72X36 - Flush mounting type KCT-DP Counter 48X48 8 pin Flush mounting type KPC-48 Digital Timer 48X48 8 pin Flush mounting type KDT-48 48X48 8 pin Flush mounting type KTM-AM8 Analog Multi Timer KTM- 48X48 11 pin Flush mounting type AM11 Basic 50X62 8 pin Surface mounting type KTM-1 50X62 8 pin Flush mounting type KTM-2 Timer IC Timer Twin Timer 50X62 8 pin Surface mounting type KTM-1T 50X62 8 pin Flush mounting type KTM-2T 48 Timer 48X48 8 pin Flush mounting type KTM-1F Mini Multi Timer 36X40 8 pin Flush mounting type KTM-1S Timing Relay 21X pin (8 pin for 2P model) - KTM-3M Flicker 50X62 8 pin Surface mounting type KFR-1 49X62 8 pin Flush mounting type KFR-2 Display Only 72X36 - Flush mounting type KD-DPS
2 KCT-72 Timer/Counter Specification Model Display Voltage Power Consumption Returning Time Input Counting External DC Source Memory Backup Ratings Output Output relay durability Insulation resistance Dielectric strength Anti-noise resistance KCT-72 Red LED(6 digits) 90~240VAC(50/60Hz) 3.5VA Power reset: 500ms/ Reset button: 20ms non-voltage input 30CPS/2,000CPS DC12V±10% 50mA Max. 10 years 205VAC 2.5A, 30VDC 2A(resistive load) Relay output: 1C SPST NPN Transistor open collector output (30VDC, 50mA Max.) Mechnical: 10,000,000 operations Electrical: 200,000 operations min. 100MΩ(DC500V) 50/60Hz AC2,000V for 1 minute Square wave(pulse width 1μs ) by noise simulator ± 2KV Vibration Resistance 10~55Hz at double amplitude: 0.75mm(X,Y,Z directions) for 1 hour Malfunction 10~55Hz at double amplitude: 0.5mm(X,Y,Z directions) for 10 min. Shock Resistance 30G, at 3 axis, 3 times Malfunction 10G, at 3 axis, 3 times Ambient Temperature -10~+55 (not freezing condition) Ambient Humidity 35~85% RH Material ABS Weight 395g
3 KCT-72 Timer/Counter DIP switch function DIP S/W # COUNTER TIMER 1 ON: No memory backup / OFF: Memory backup 4,3,2, Output mode selection 6,5 Input mode selection 7 Counting speed selection Time setting range ON:2,000cps/OFF:30cps 8 ON: Addition mode / OFF: Subtraction mode 9 ON OFF Counter Input Mode
4 Counter Output Mode KCT-72 Timer/Counter
5 KCT-72 Timer/Counter Timer Time Range Circuit Diagram
6 KCT-72 Timer/Counter Input Diagram Non-contact input (proximity sensor or photo sensor) Contact input (Limit switch or micro switch) Counter Sensor Counter Sensor Counter S/W Counter S/W Dimensions
7 KCT-DP Timer/Counter Specification Model Display Voltage Power Consumption Returnung Time Input Counting External DC Source Memory BackUp Insulation resistance Dielectric strength Anti-noise resistance Resistance Vibration Malfunction Resistance Shock Malfunction Ambient Temperature Ambient Humidity Material Weight KCT-DP Red LED(6 digits) 90~240VAC(50/60Hz) 1.5VA Power reset: 500ms/ Reset button: 20ms non-voltage input 30CPS/2,000CPS DC12V±10% 50mA Max. 10 years min. 100MΩ(DC500V) 50/60Hz AC2,000V for 1 minute Square wave(pulse width 1μs ) by noise simulator ± 2KV 10~55Hz at double amplitude: 0.75mm(X,Y,Z directions) for 1 hour 10~55Hz at double amplitude: 0.5mm(X,Y,Z directions) for 10 min. 30G, at 3 axis, 3 times 10G, at 3 axis, 3 times -10~+55 (not freezing condition) 35~85% RH ABS 100g
8 KCT-DP Timer/Counter DIP switch function DIP S/W # COUNTER TIMER 1 ON: No memory backup / OFF: Memory backup 2 ON OFF 3 ON: Addition mode / OFF: Subtraction mode Counting speed selection ON:2,000cps/OFF:30cps Counter input mode Time setting range Counter Input Mode
9 KCT-DP Timer/Counter Timer Time Range DIP SWITCH TIME RANGE DIP SWITCH TIME RANGE 99,999.9 seconds 99,999.9 hours 999,999 seconds 9,999 minutes 59 seconds 99,999.9 minutes 9,999 hours 59 minutes 999,999 minutes 99 hours 59 minutes 59 seconds Circuit Diagram
10 KCT-DP Timer/Counter Input Diagram Non-contact input (proximity sensor or photo sensor) Contact input (Limit switch or micro switch) Counter Sensor Counter Sensor Counter S/W Counter S/W Dimensions
11 KPC-48 Counter Specification Model Display Voltage Power Consumption Returnung Time Input Counting External DC Source Ratings Output Output relay durability Insulation resistance Dielectric strength Anti-noise resistance Resistance Vibration Malfunction Resistance Shock Malfunction Ambient Temperature Ambient Humidity Material Weight KPC-48 Red LED(4 digits) 90~240VAC(50/60Hz) 2.2VA Power reset: 500ms/ Gate: 20ms Counter input, reset input 30CPS/2,000CPS DC12V±10% 50mA Max. 205VAC 2.5A, 30VDC 2A(resistive load) Relay output: 1C SPST Mechnical: 10,000,000 operations Electrical: 200,000 operations min. 100MΩ(DC500V) 50/60Hz AC2,000V for 1 minute Square wave(pulse width 1μs ) by noise simulator ± 2KV 10~55Hz at double amplitude: 0.75mm(X,Y,Z directions) for 1 hour 10~55Hz at double amplitude: 0.5mm(X,Y,Z directions) for 10 min. 30G, at 3 axis, 3 times 10G, at 3 axis, 3 times -10~+55 (not freezing condition) 35~85% RH ABS 395g
12 KPC-48 Counter DIP Switch Counter Output Mode
13 KPC-48 Counter Input Diagram Wiring Diagram Dimensions
14 KDT-48 Digital Timer Specification Model KDT-48 Display Red LED(4 digits) Wiring 8 pin Socket: KH-KTS-8, KH-RS-R8, KH-MR-8 Voltage 90~240VAC(50/60Hz) Power Consumption 2.2VA Returning Time Power reset: 500ms/ Gate: 20ms Output Ratings 250VAC 2A, 30VDC 2A(Resistive Load) Output Relay Durability Mechanical: 10,000,000 operations Electrical: 200,000 operations( Resistive Load) Insulation resistance min. 100MΩ(DC500V) Dielectric strength 50/60Hz AC2,000V for 1 minute Anti-noise resistance Square wave( pulse width 1μs ) by noise simulator ± 2KV Vibration Resistance 10~55Hz at double amplitude: 0.75mm(X,Y,Z directions) for 1 hour Malfunction 10~55Hz at double amplitude: 0.5mm(X,Y,Z directions) for 10 min. Shock Resistance 30G, at 3 axis, 3 times Malfunction 10G, at 3 axis, 3 times Accuracy ±0.01% Protection IP50 Ambient Temperature -10~+55 (not freezing condition) Ambient Humidity 35~85% RH Material PC Weight 96 g
15 KDT-48 Digital Timer DIP Switch Timer Output Mode
16 Time Range Setting KDT-48 Digital Timer DIP SWITCH Time Range DIP SWITCH Time Range seconds 9,999 seconds minutes 9,999 minutes hours 9,999 hours 99 minutes 59 seconds 99 hours 59 minutes Wiring Diagram
17 Dimensions KDT-48 Digital Timer
18 KTM-AM Multi-Timer Specification Model KTM-AM8 KTM-AM11 Time Range 0.05sec~300 hours Voltage 24~240VAC(50/60Hz), 24~240VDC Power Consumption 24~240VAC: relay ON(2.5VA) relay OFF(0.8VA) 24~240VDC: relay ON(1.0W) relay OFF(0.3W) Mode1&5: time-limit 2C Output Mode2,3,4,6: instantaneous 1C+time-limit 1C Ratings 250VAC 5A(Resistive load) Relay durability Mechanical: 10,000,000 operations Electrical: 100,000 operations Returning time Max. 100ms Start - Minimum signal width: 50ms Input Inhibit - Reset - non-voltage input Repetition error ±0.3% Max. Setting error ±5%±50ms Max. Voltage error ±0.2% Max. Temperature error ±2% Max. Insulation resistance 100MΩ(500VDC) Dielectric strength 2,000VAC 50/60Hz for 1 minute Anti-noise resistance Square wave(pulse width 1μs ) by noise simulator ± 2KV Vibration Resistance 10~55Hz at double amplitude: 0.75mm(X,Y,Z directions) for 1 hour Malfunction 10~55Hz at double amplitude: 0.5mm(X,Y,Z directions) for 10 min. Ambient Temperature -10~+55 (not freezing condition) Ambient Humidity 35~85% RH Weight 100g
19 KTM-AM Multi-Timer Wiring Diagram KTM-AM8 Mode 1 & 5 Mode 2, 3, 4, 6 Dimensions
20 Operating Front Panel KTM-AM Multi-Timer Time Specification Time Unit Time Range Setting Time Sec ~1.2 Min 3 0.2~3 Hr 12 1~12 10 Hr 30 2~30 Mode Setting Output Mode KTM-AM8 KTM-AM11 1 POWER ON DELAY 1 SIGNAL ON DELAY 2 POWER ON DELAY 2 FLICKER 1(OFF START) 3 POWER ON DELAY 3 FLICKER 2(ON START) 4 INTERVAL INTERVAL 5 FLICKER 1(OFF START) SIGNAL OFF DELAY 6 FLICKER 2(ON START) SIGNAL; ON/OFF DELAY
21 Operating Mode_ KTM-AM8 KTM-AM Multi-Timer
22 KTM-AM Multi-Timer Operating Mode_KTM-AM11, KTM-AM11E
23 KTM-1, KTM-2 2 IC Timer Specification Model KTM-1 KTM-2 Mounting Socket Panel Mounting Operation ON Delay Compatible sockets KH-TDR-R8 KH-MR-8 AC type: 110/220VAC(50/60Hz) Rated Voltage DC type: 12/24/48/110 VDC Time Range 0.05sec~300 hours Power Consumption AC type: 2.5 VA / DC type: 5W Returning time min. 0.5 second Mode1&5: time-limit 2C Output Mode2,3,4,6: instantaneous 1C+time-limit 1C Ratings 250VAC 5A(Resistive load) Relay durability Mechanical: 1,000,000 operations Electrical: 200,000 operations Contact Output Ratings 110VAC 3A / 220VAC 1.5A / 24VDC 3A(resistive load) Operating time deviation ±0.5% Max.(for maximum setting time) Setting error ±5% Max.(for maximum setting time) Voltage error ±0.5% Max.(for maximum setting time) Temperature error ±3% Max.(for maximum setting time) Insulation resistance 100MΩ(500VDC) Dielectric strength 1,500VAC 50/60Hz for 1 minute Shock resistance 30G Vibration resistance 10~55Hz at double amplitude: 0.5mm(X,Y,Z directions) for 1 hour Ambient Temperature -10~+50 (not freezing condition) Ambient Humidity 35~85% RH Protection IP50(indoor use only) Weight 200~260 g
24 KTM-1, KTM-2 2 IC Timer Time Specification KTM-1 KTM-2 Max. Gradation min. Gradation Time Range KTM-1-06S KTM-2-06S 6 sec 0.5 sec 0.2~6 sec KTM-1-12S KTM-2-12S 12 sec 0.5 sec 0.2~12 sec KTM-1-30S KTM-2-30S 30 sec 1 sec 0.5~30 sec KTM-1-60S KTM-2-60S 60 sec 2.5 sec 0.5~60 sec KTM-1-03M KTM-2-03M 3 min 15 sec 1~180 sec KTM-1-10M KTM-2-10M 10 min 30 sec 10 sec~10 min KTM-1-30M KTM-2-30M 30 min 2.5 min 30 sec~30 min KTM-1-60M KTM-2-60M 60 min 2.5 min 30 sec~1hr KTM-1-03H KTM-2-03H 3 hr 10 min 3 min~3 hr KTM-1-06H KTM-2-06H 6 hr 15 min 10 min~6 hr KTM-1-12H KTM-2-12H 12 hr 30 min 10 min~12 hr KTM-1-24H KTM-2-24H 24 hr 1 hr 30 min~24 hr Self-restoring Circuit Diagram
25 Wiring Diagram KTM-1, KTM-2 2 IC Timer Dimensions
26 KTM-1T, KTM-2T Twin Timer Specification Model KTM-1T KTM-2T Mounting Socket Panel Mounting Operation ON Delay Compatible sockets KH-TDR-R8 KH-MR-8 AC type: 110/220VAC(50/60Hz) Rated Voltage DC type: 12/24/48/110 VDC Power Consumption AC type: 2.5 VA / DC type: 5W Returning time min. 0.5 second Ratings 250VAC 5A(Resistive load) Relay durability Mechanical: 1,000,000 operations Electrical: 200,000 operations Contact Output Ratings 110VAC 3A / 220VAC 1.5A / 24VDC 3A(resistive load) Operating time deviation ±0.5% Max.(for maximum setting time) Setting error ±5% Max.(for maximum setting time) Voltage error ±0.5% Max.(for maximum setting time) Temperature error ±3% Max.(for maximum setting time) Insulation resistance 100MΩ(500VDC) Dielectric strength 1,500VAC 50/60Hz for 1 minute Shock resistance 30G Vibration resistance 10~55Hz at double amplitude: 0.5mm(X,Y,Z directions) for 1 hour Ambient Temperature -10~+50 (not freezing condition) Ambient Humidity 35~85% RH Protection IP50(indoor use only) Weight 210 g
27 KTM-1T, KTM-2T Twin Timer Time Specification KTM-1T KTM-2T Time Specification ON OFF KTM-1T-03S KTM-2T-03S 3 sec 3 sec KTM-1T-06S KTM-2-06S 6 sec 6 sec KTM-1T-06S-60S KTM-2T-06S-60S 6 sec 30 sec KTM-1T-12S KTM-2-12S 12 sec 12 sec KTM-1T-30S KTM-2T-30S 30 sec 30 sec KTM-1T-60S KTM-2T-60S 60 sec 60 sec KTM-1T-60S-06S KTM-2T-60S-06S 60 sec 6 sec KTM-1T-03M KTM-2T-03M 3 min 3 min KTM-1T-03M-30M KTM-2T-03M-30M 3min 30 min KTM-1T-06M KTM-2T-06M 6 min 6 min KTM-1T-12M KTM-2T-12M 12 min 12 min KTM-1T-30M KTM-2T-30M 30 min 30 min KTM-1T-60M KTM-2T-60M 60 min 60 min KTM-1T-03H KTM-2T-03H 3 hr 3 hr KTM-1T-06H KTM-2T-06H 6 hr 6 hr KTM-1T-12H KTM-2T-12H 12 hr 12 hr KTM-1T-24H KTM-2T-24H 24 hr 24 hr Wiring Diagram
28 Dimensions KTM-1T, KTM-2T Twin Timer
29 KTM-1F 48X48 Timer Specification Model KTM-1F KTM-1FN KTM-1FR Mounting Socket Operation ON Delay ON Delay,,Instantaneous Relay Compatible sockets KH-KTS-8, KH-MR-8 Rated Voltage 24~220VAC, 24~120VDC 220 VAC ONLY Power Consumption 3.2VA Returning time min. 0.5 second Relay durability Mechanical: 1,000,000 operations Electrical: 200,000 operations Contact Output Ratings 110VAC 3A / 220VAC 1.5A / 24VDC 3A(resistive load) Operating time deviation ±0.5% Max.(for maximum setting time) Setting error ±5% Max.(for maximum setting time) Voltage error ±0.5% Max.(for maximum setting time) Temperature error ±3% Max.(for maximum setting time) Insulation resistance 100MΩ(500VDC) Dielectric strength 1,500VAC 50/60Hz for 1 minute Shock resistance 30G Vibration resistance 10~55Hz at double amplitude: 0.5mm(X,Y,Z directions) for 1 hour Ambient Temperature -10~+50 (not freezing condition) Ambient Humidity 35~85% RH Protection IP50(indoor use only) Weight 102 g
30 KTM-1F 48X48 Timer Time Specification Model No. Max. Gradation min. Gradation Time Range KTM-1F-01S 1 sec 0.5 sec - KTM-1F-06S 6sec 0.5 sec 0.2~6 sec KTM-1F-12S 12 sec 0.5 sec 0.5~12 sec KTM-1F-30S 30 sec 1 sec 0.5~30 sec KTM-1F-60S 60 sec 2 sec 1~60 sec KTM-1F-03M 3 min 15 sec 10~180 sec KTM-1F-10M 10 min 30 sec 30 sec~10 min KTM-1F-30M 30 min 2.5 min 30 sec~30 min KTM-1F-60M 60 min 2.5 min 30 sec~60 min KTM-1F-03H 3 hr 10 min 3 min~3 hr KTM-1F-06H 6 hr 15 min 10 min~6 hr KTM-1F-12H 12 hr 30 min 10 min~12 hr KTM-1F-24H 24 hr 1 hr 30 min~24 hr Wiring Diagram
31 Dimensions KTM-1F 48X48 Timer
32
33
34
35
36
37
Self-Powered Counters H7EC
Self-Powered Counters Subminiature Count Totalizers Require No External Power Supply Subminiature 8 x mm (1.89 x.9 in) Improved noise immunity Screw terminal and wire-wrap types available AC, DC, and no-voltage
KTC. Preset Counter/ Timer. Programmable Type. Model Number Legend SALIENT FEATURES. Sensing. Digital Panel Meters
Preset Counter/ Timer Programmable Type Model Number Legend SALIENT FEATURES 6 Digits PV, SV Universal Input Dual alarm output MODBUS via RS-485 High Speed - 10 KCPS Multiple output modes Batch Counting,
TIMERS FOR ALL APPLICATIONS
Timers Overview TIMERS FOR ALL APPLICATIONS AutomationDirect now offers solid-state timers brought to you by two leaders in the industry, FUJI and Koyo. FUJI Electric has been in business since 1923 and
H3CR-F H3CR-F8 H3CR-F-300 H3CR-F8-300
R Solid-State Repeat-Cycle Timer 1/1 DIN Solid-State Repeat-Cycle Timer Wide power supply ranges of 100 to 240 VAC 24 VAC/VDC, 12VDC Combinations of independent long or short / time settings are possible
Multi Voltage Options. Multi Voltage Options 110VAC + 24VAC/DC 230VAC + 24VAC/DC 24VAC/DC 110VAC 230VAC
DIN Timers TD 22.5mm DIN rail mounting Electronic Timers AC/DC coil operation Multi-time range Multi-function, On-delay, Off-delay and Star/Delta versions Voltage range selectable Marking plate cover Y
Solid-state Timer. Ordering Information. Ultra-slim Timer for G2R Relay Socket. H3RN-jj. Accessories (Order Separately) Connecting Socket
Solid-state Timer Ultra-slim Timer for G2R Relay Socket Pin configuration compatible with G2R Relay and mounts to the P2R/P2RF Socket. Standard multiple time ranges and multiple operating modes. Conforms
Solid-state Timer. Ordering Information. Miniature Timer with Multiple Time Ranges and Multiple Operating Modes H3YN- - Accessories (Order Separately)
Solid-state Timer Miniature Timer with Multiple Time Ranges and Multiple Operating Modes Minimizes stock. Pin configuration compatible with MY Power Relay. Standard multiple operating modes and multiple
Solid-state Timer H3YN
Solid-state Timer H3YN Miniature Timer with Multiple Time Ranges and Multiple Operating Modes Minimizes stock. Pin configuration compatible with MY Power Relay. Standard multiple operating modes and multiple
Solid-State Counter/Timer
Solid-State Counter/Timer 1/16 DIN, Easy-to-Operate Combination Counter and Timer Operation selectable as preset counter or timer 6-digit LCD display Present Value: 8 mm (0.32 in) Set Value: 4 mm (0.16
Product Discontinuation Notices. Discontinuation Notice of Compact proximity sensor TL-M series (for china area only)
PRODUCT NEWS Product Discontinuation Notices August 1, 2011 Proximity Sensors No. 2011248E-2 Discontinuation Notice of Compact proximity sensor (for china area only) Product Discontinuation Recommended
PRD/PRDW Series. Long Distance Type
Long Distance Type Long distance proximity Features Long sensing distance (. to times longer sensing distance guaranteed compared to existing models) Improved the noise resistance with dedicated IC Built-in
BWPK Series. Picking sensor. Features. Specifications
Picking Features Plastic injection case Slim body(w0 H T0mm) Long/Short sensing distance mode (sensing distance selection function) Mutual interference prevention(frequency switching function) Selectable
SPST-NO SPDT DPST-NO DPDT
Next-generation PCB Relay Available in Various Models ROHS compliant. High sensitivity: (250mW) and high capacity (16A) models available Low profile: 15.7 mm max. in height. Conforms to EN 61810-1, UL508
PRCMT18-5DO PRCMT18-5DC PRCMT18-5DO-I PRCMT18-5DC-I
PRCM Series Cylindrical Connector Type Proximity Sensor Features Improved the noise immunity with dedicated IC Built-in reverse polarity protection circuit (DC -wire type) Built-in surge protection circuit
Note: Each relay to be mounted must incorporate a coil that has proper specifications within the maximum rated voltage range.
I/O Block Base G7A Reduces Wiring while Providing I/O Flexibility Mount I/O relays and I/O SSRs freely. Electric-shock preventive (finger-touch protection) terminal block incorporated conforming to VDE
H3CA-8H-AC/100/110/120
Solid-State Timer 1/16 DIN, Digital-Set Timer with 0.1 Second to 9,990 Hours Range 8 field-selectable operation modes Universal AC/DC supply voltage timers available Operations include ON-delay, Repeat
Conforms to VDE0435/2021 C/250, VDE0110, VDE0106/P100 Conforms to EN , pren
Solid-state Power OFF-delay Timer II DIN 22.5-mm Solid-state Power OFF-delay Timer High immunity to invertor noise. Long power OFF-delay times; S-series: up to 12 seconds, L-series: up to 120 seconds.
Chapter. In This Chapter...
Getting Started Chapter In This Chapter... Manual Overview.... - Purpose of this Manual.... - Technical Support... - Special Symbols.... - General Description.... -3 Unpacking.........................................................
HIGHLY SENSITIVE 1500 V FCC SURGE BREAKDOWN VOLTAGE MINIATURE RELAY
HIGHLY SENSITIVE 1500 V FCC SURGE BREAKDOWN VOLTAGE MINIATURE RELAY DS RELAYS RoHS Directive compatibility information http://www.mew.co.jp/ac/e/environment/ FEATURES 1. Breakthrough height of 9.8 mm.386
SRT2-ROC08, SRT2-ROC16
Ultra-miniature 8-point and 16-point Relaymounted Terminals Ultra-compact (8-point models: 101 x 51 x 51 mm (W x H x D); 16-point models: 156 x 51 x 51 mm (W x H x D)) MOS FET Relay and Relay models. DIN
-ment Ambient humidity 35 to 95%RH, Storage :35 to 95%RH
PRD/PRDW Series Long Distance type Long distance proximity Features Long sensing distance (. to times longer sensing distance guaranteed compared to existing models) Improved the noise resistance with
G60 SERIES ELECTRONIC PRESET COUNTER ESC P1 / P2 SHIFT RESET ENT
LINE SEIKI G0 SERIES ELECTRONIC P COUNTER or DIGITS ( Line LED Display) POWER SUPPLY (AC0 ~ 0V) PRESCALE FUNCTION KEY PROTECT, MEMORY DECIMAL POINT POSITIONING DUST / SPLASH PROOF G0 - G0 - MODEL SELECTION
Model Number Structure
Solid State Relays with Failure Detection Function G3PC Detects failures in SSR used for heater temperature control and simultaneously outputs alarm signal. This SSR supports the safe design of heater
RE48ATM12MW on-delay timing relay s..300 h V AC - 2 OC
Characteristics on-delay timing relay - 0.02 s..300 h - 24..240 V AC - 2 OC Product availability : Stock - Normally stocked in distribution facility Price* : 73.00 USD Main Range of product Product or
FEATURES DESCRIPTION FEATURES
FEATURES Two High Speed Counters Two Pulse Train Outputs Two Pulse Width Modulation Outputs 24 Sinking or Sourcing Inputs 16 Outputs 1 RS232 Port 2 RS485 Ports Supports Modbus RTU Protocol Communicate
G3PC. Model Number Structure. Solid State Relays with Failure Detection Function. Model Number Legend
Solid State Relays with Failure Detection Function G3PC Refer to Warranty and Application Considerations (page 1), Safety Precautions (page 4), and Technical and Safety Information (page 6). Detects failures
Solid-state Counter. Power supply Output No voltage input (short/open circuit) Voltage input (high/low voltage) 30 cps 1 kcps 30 cps 1 kcps AC
Solid-state er DIN-sized (48 x 48 mm) Solid-state er with Timer Functions Easier operation due to improved front panel er and timer function modes switch-selectable Large easy-to-read 6-digit LCD Non-significant
M4Y/M4W/M5W/M4M Series
4Y/4W/5W/4 Series Panel selection Ⅱ This panel selection is except T4N / T4Y / T4W Series. Digital panel 4 1 / 2 Digit 3 1 / 2 Digit digit 72 96 72 96 48 36 48 72 Indicator Single output setting Dual output
SYSMAC Remote Transistor Module
9 SYSMAC Remote Transistor Module Ultra-compact Remote I/O Modules to Match Most Applications 1 4-point, 8-point and 16-point models 1 4-point models measure 82 W x 32 D x 64.5 H mm; 8- and 16-point models
E3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection method Sensing
TIMERS FOR ALL APPLICATIONS
Fuji 1/1 DIN Super imers Overview IMERS FOR ALL APPLICAIONS AutomationDirect now offers solid-state timers brought to you by two leaders in the industry, FUJI and Koyo. FUJI Electric has been in business
Long seller backed by product variety and high reliability
Long seller backed by product variety and high reliability DS RELAYS RoHS compliant FEATURES 1. Breakthrough height of 9.8 mm.386 inch beats the 1 mm.394 inch limit 1c and 2c all have the same height (9.8
RE48ATM12MW on-delay timing relay s..300 h V AC - 2 OC
Characteristics on-delay timing relay - 0.02 s..300 h - 24..240 V AC - 2 OC Complementary Product front plate size Control type Housing material Main Range of product Product or component type Electrical
2. Actuator B: Ball type P: Pin type F: Flat type
Contact Displacement Sensor Built-in Amplifier Ensures Ease of Use and Saves Wiring Effort. Sensor Operates with a Low Force in a Wide Range of Applications. H Works with a low operating force (30 gf)
Solid-state Timer. Mounting system contact t contact. t Surface mounting/ track mounting
Solid-state Timer DIN-sized (48 x 48, 45 x 75 mm) Timer with Digital Setting and LCD Display Dual power supplies for free AC/DC. Eight operation modes selectable with one unit. Any desired time can be
Model Number Structure
Solid State Relays with Failure Detection Function G3PC CSM_G3PC_DS_E_1_1 Refer to Safety Precautions for All Solid State Relays. Detects failures in SSR used for heater temperature control and simultaneously
RE Product data sheet Characteristics. universal plug-in timing relay - flashing s..60 mn V AC - 2 OC. Main.
Characteristics universal plug-in timing relay - flashing - 0.1 s..60 mn - 24..240 V AC - 2 OC Main Range of product Product or component type Discrete output type Contacts type and composition Width pitch
RE17LAMW on-delay timing relay - 1 s..100 h V AC/DC - solid state output
Characteristics on-delay timing relay - 1 s..100 h - 24..240 V AC/DC - solid state output Complementary Control type Voltage range Main Range of product Product or component type Discrete output type Width
SmartSlice I/O Plug-and-Play I/O. System Configuration
CN CN A/B CN CN A/B RT-ML SW SW RT-ML SW SW RT-@ SmartSlice I/O Plug-and-Play I/O Remote I/O with digital and analogue I/O units, relay outputs and configurable temperature inputs. All SmartSlice units
Monitoring Relays can be used to monitor 3-phase power supplies with 3 or 4 wires simply by changing DIP switch settings.
Authorised Distributors:- Intech Systems Chennai Pvt. Ltd, Chennai-600 032 Ph: +91 44 4353 8888 Fax: 044 4353 7888 E-mail: info@intechchennai.com Website: www.intechchennai.com Three-phase Voltage Relay
PRODUCT SPECIFICATION
SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 1 SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality
HIGHLY SENSITIVE 1500 V FCC SURGE BREAKDOWN VOLTAGE MINIATURE RELAY
HIGHLY SENSITIVE 15 V FCC SURGE BREAKDOWN VOLTAGE MINIATURE RELAY DS RELAYS FEATURES 1. Breakthrough height of 9.8 mm.386 inch beats the 1 mm.394 inch limit 1c, 2c, and 4c all have the same height (9.8
CPU Units with 20 I/O points
CPM2A General s CPU Units with 20 I/O points CPU Units with 30 I/O points CPU Units with 40 I/O points Supply voltage AC power 100 to 240 VAC, 50/60 Hz DC power 24 VDC Operating voltage AC power 85 to
Displays Transducers. Displays and transducers
JJ Displays JJ Transducers Displays and transducers DS_Displays_and_transducers 06/2016 225 Displays and transducers Our electronic devices for flow and volume measurement are suitable for all SIKA flow
DPST-NO None 2 channels Auto-reset Inverse (+/-) 24 VAC/VDC 4 G9SB-2002-A 1 channel or 2
Safety Relay Unit Ultra Slim Safety Relay Unit 17.5 mm wide models available with 2 or 3 poles. 22.5 mm wide 3 pole models also available EN Standards (TÜV approval) DIN-track mounting possible Ordering
Light ON 5m. * Light ON. 2.5m (3m) Light ON. (5m)
All voltage photoelectric sensors Built-in amplifier accepts wide supply voltage range. Slim, space-saving construction measures only x x 7.4 mm. s with long life expectancy and high switching capacity
KCN-S/KCN-W. Merits. Single/Dual Preset Counters for Addition and Subtraction. Electronic. Counters
Single/Dual Preset for and Electronic KCN-S/W KCN-A KCV Maximum counting speed: cps, 1kcps, kcps or kcps (selected by digit keys) With the DIN standard size of only 8 mm by 8 mm, the full featured counter
RE17LAMW on-delay timing relay - 1 s..100 h V AC/ DC - solid state output
Characteristics on-delay timing relay - 1 s..100 h - 24..240 V AC/ DC - solid state output Main Range of product Product or component type Discrete output type Width Component name Time delay type Time
Inductive Proximity Sensor
Inductive Proximity Sensor Subminiature Sensor with Cable Amplifier Offers Greater Mounting Flexibility Programmable Controller-compatible Subminiature, shielded sensing head (3 or 8 dia.) allows the Sensor
Ferrous metal (The sensing distance decreases with non-ferrous metal.) Power supply voltage (operating voltage range)
Description The sensors provide excellent results even with difficult-to-detect objects, e.g. small or thin parts, wires or bright metals. A variety of types cover a wide range of individual requirements
Long seller backed by product variety and high reliability
Long seller backed by product variety and high reliability DS RELAYS Compliance with RoHS Directive FEATURES 1. Breakthrough height of 9.8 mm.386 inch beats the 1 mm.394 inch limit 1c and 2c all have the
PRODUCT SPECIFICATION
SIM Card Connector, Hinged Type, 6 Pin, SMT, 1.85mm Profile. Page 1 SIM Card Connector, Hinged Type, 6 Pin, SMT, 1.85mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality
02/11/2015
DIN Rail Mount 35 mm HSV Part number 84874320 Control of overspeed, underspeed, operating rate, stopping Measurement via discrete sensors - 3-wire PNP or NPN, Namur, voltage 0-30V or volt-free contact
Terminal block 2 A 5 X 3. Specification
D Series Features Automatic communication speed recognition : Enables to recognize communication speed automatically when connecting with master Network Voltage monitoring : If PV is lower than SV, enables
Visualize the actual worksite status! Simple and Intelligent I/O Slave Units.
Digital I/O Slave Units with Screw Terminal Blocks (2-tier Terminal Block/Relay Output/SSR Output) CRT1-@D(-1)/@D(-1)/ROS@/ROF@ Visualize the actual worksite status! Simple and Intelligent I/O Slave Units.
Solid-state Timers H3DK
New Product News Solid-state Timers H3DK DIN Track-mounted, 22.5-mm-width Standard Timer Series LR A wide AC/DC power supply range (24 to 240 VAC/DC).*1 All sub-series include models with 12-VDC power
Programmable Relay ZEN V2 Units
Programmable Relay ZEN V2 Units Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Refer to Warranty
DIN 48 SIZE DIGITAL TIMER. Compact, Easy-to-read, Easy-to-use... A digital timer made to meet the market s needs.
DIN SIZE DIGIAL IMER imers Compact Easy-to-read Easy-to-use... A digital timer made to meet the market s needs. Pin type Product types Part names terminal type Features. Bright and Easy-to-Read Display
DIN 48 SIZE LCD ELECTRONIC COUNTER. UL File No.: E C-UL File No.: E122222
C Counters -digit display -digit display..9 mm inch DIN SIZE CD EECTRIC U File No.: E C-U File No.: E Features. Bright and Easy-to-Read Display A brand new bright -color backlight CD display. The easy-to-read
Inductive Proximity Sensor
Inductive Proximity Sensor Miniature, Slim-styled Proximity Sensor Space-saving Sensor ideal for timing cam and dog detection. Four mounting holes provided: two each mounting from side or rear of the housing.
T imers Timers Selection Guide Timing Diagrams Overview RTE Series Analog Timers Instructions onlinecomponents.com IDEC.
Industrial Automation Catalog Section - U906 imers Selection uide iming Diagrams Overview RE Series Analog imers Instructions imers For up-to-date information, or to request a full copy of this catalog,
Long-time range model (0.1 min to 10 h) 24 VAC; SPDT H3RN-1 H3RN-11 12, 24 VDC DPST-NO H3RN-2 H3RN-21
Solid-state timer CSM DS_E_3_2 Ultra-slim Timer for G2R Relay Socket Pin configuration compatible with G2R Relay and mounts to the P2R/P2RF Socket. Standard multiple time ranges and multiple operating
Combine Relays and P7TF Block Bases to match your application requirements. Use the table below to configure Relay Blocks.
9 Relay I/O Block Reduces Wiring within the Control Panel and Reduces Installation Time 1 Compact 16-pt models: 182 W l 85 D l 68 H mm; 8-pt block width is 102 mm 1 Can be connected to the PLC with a connecting
H2C Motor Timers will be Discontinued March 2013; Replace with H3CR-A8E Solid-state Timer
NO: TI-042M PRODUCT: H2C Motor Timer [MELA] DATE: March 2012 TYPE: Discontinuation Notice H2C Motor Timers will be Discontinued March 2013; Replace with H3CR-A8E Solid-state Timer H2C Motor Timer H3CR-A8E
Amplifiers, Counters, Timers & Controls
Amplifiers, Counters, Timers & Controls Panel Meter 814 Counter/Timer/Rate Indicator 815-817 Speed Monitor 818-819 Signal Converter 820-822 Power Supplies/Amplifier 823-824 813 Panel Meter Panel Meter
38mm Slim design, touch screen, and better reliability Graphic panel, GP-S044
38mm Slim design, touch screen, and better reliability Graphic, GP-S044 Model GP-S044-S1D0 GP-S044-S1D1 consumption Max. 3.6W 4.4 inch STN Blue Negative 240 80 dots area 112.8mm 37.6mm MONO(blue, white)
Despite its ultra-slim design, a CPM2C system can provide up to 192 I/O points!
Despite its ultra-slim design, a CPM2C system can provide up to 192 I/O! Model Numbers Expansion I/O Units Name CPM1A-8ET 8 input Transistor outputs (sinking) CPM1A-8ED 8 DC inputs CPM1A-8ER 8 relay outputs
KCH-B KCH-B. Merits. Application examples. Counters for Display of High-speed Addition and Subtraction. Counters. switches to write settings
for Display of High-speed Addition and Subtraction Maximum operating speed 2kHz Used in industrial machinery, end-measuring devices, and the like, this electronic counter is exclusively for display. It
Timers. RTE Series. RTE Series Analog Timers. Specifications. G-8 USA: (800) 262-IDEC or (408) , Canada (888) 317-IDEC
Analog Timers Key features of the RTE series include: time ranges and timing functions ON-delay, interval, OFF-delay, one-shot Time delays up to 0 hours Space-saving package (." x." x.0") High repeat accuracy
iothinx 4500 Series (45MR) Modules
iothinx 4500 Series (45MR) Modules Modules for iothinx 4500 Series Feature and Benefits Easy tool-free installation and removal Built-in LED indicators for IO channels Wide operating temperature range:
Model Number Structure
Solid-state Twin Timers CSM DS_E_1_5 DIN 48 48-mm Twin Timers Wide power supply ranges of 100 to 240 VAC and 48 to 125 VDC respectively. ON- and OFF-times can be set independently and so combinations of
4 mm. 8 mm. Proximity Sensor. Sensing head Sensing distance Output configuration Part Number M18 Shielded 4 mm DC 3-wire PNP-NO E2EZ-X4B1 M30
Sensing distance Supply voltage Output 4 mm 8 mm 12 to 24 VDC 100 to 220 VAC 200 ma max. 100 ma max. Proximity Sensor Detects Objects without Being Influenced by Aluminum and Cast Iron Cut Chips Sense
RE17LCBM off-delay timing relay - control - 1 s..100 h V - solid state output
Characteristics off-delay timing relay - control - 1 s..100 h - 24..240 V - solid state output Main Range of product Product or component type Discrete output type Width Component name Time delay type
GT3F Series True OFF Delay Timers
TF Series TF Series True OFF Delay Key features of the TF series include: Mountable in sockets or flush panel True power OFF-delay up to 10 minutes No external control switch necessary Available with reset
Model Number Structure
Analogue Temperature Controller E5C2 DIN-sized (48 x 48 mm) Temperature Controller with Analog Setting Compact, low-cost Temperature Controller. Incorporates proportional control and reset adjustment function.
Safety Monitoring Relays
Safety Monitoring Relays G9SA G9SA Safety Relay Unit Four kinds of 45-mm wide units are available: A 3-pole model, a 5-pole model, and models with 3 poles and 2 OFF-delay poles, as well as a two-hand controller.
Power and Expansion Selection
CJ1 SYSTEM POWER AND EXPANSION Power and Expansion Selection This section provides tools to calculate the CJ1 system current total needed to select the power supply. When the number of modules or power
Syr-line TMR48D Digital Timer
yr-line MR48D Digital imer Front Panel 48x48 (1/16 DIN) Large LED or LCD creen (13.2 mm) Multi-function and single-function Basic & Advance configuration modes Multi-range (0.05 s 9999 h) Multi-voltage
Timers. GT3W Series Dual Time Range Timers. 250V AC/150V DC Time Range. 1: 0.1sec to 6 hours, 3: 0.1sec to 300 hours
GT3W Key features: Sequential start, sequential interval, on-delay, recycler, and interval ON timing functions 2 time settings in one timer 8 selectable operation modes on each model Mountable in sockets
Main contacts Auxiliary contact Number of input channels Rated voltage Model Category 24 VAC/VDC 3PST-NO SPST-NC 1 channel or 2 channels possible
Safety Relay Unit Four kinds of -mm wide Units are available: A -safety contact model, a -safety contact model, and models with safety contacts and OFF-delay safety contacts. Also available are 7.-mm wide
Time Counters mini "h", DC Version
Type 633-DC Time Counters mini "h", DC Version Type 633.0 Type 633.7 Type 633.8 High shock resistance Miniature dimensions Electrical connections in standard grid Suitable for PCB mounting Machine-solderable
Type MVTT 14 and MVTT 15: Static Digital Time delay relays
Type MVTT 4 and MVTT 5: Static Digital Time delay relays Features 000/ setting range Time settings easily selected by means of thumbwheel switches Provide time delayed pick-up, or drop-off Compact construction
Industrial Automation
Industrial Automation Catalog 12 2013 eautomation Solution Industrial Automation Catalog 12 2013 Introduction 2 Timer/Counter/Tachometer 3 Digital Time Switch 5 Programmable Logic Controller 6 Distributed
DC-JA TOTAL ELECTRONIC COUNTER
TOTAL ELECTRONIC COUNTER Easy to see! Total counter with 24 48! White LCD display(led back-light but except for DC-JA7-V) 3 kinds of power source, AC power, DC power and built-in battery are lined-up.
Mini Photoelectric Sensor
Mini Photoelectric Sensor High cost-performance Mini Photoelectric Sensor Saves Installation Space and Wiring Effort and Detects Minute Sensing Objects Pin-point beam (1 to 2-mm dia.) makes it possible
E2Q4 Square Proximity Sensor
Inductive Square Slim, compact size M2 Plug-in connection Integrated short circuit and reverse polarity protection Active face positioning: Y-axis 5, X-axis 90 incremets Ordering Information DC type Connection
Digital Timer. Ordering Information. 1/16 DIN, Quartz Timer with Four-Digit LED Display
Digital Timer 1/16 DIN, Quartz Timer with Four-Digit LED Display Five wide ranges to choose from Wide-range AC or DC supply voltages Elapsed time (UP) or time remaining (DOWN) display available Selectable
FMF. Miniature Photoelectric Sensor. Flat Type. Model Number Legend SALIENT FEATURES. Sensing. Photoelectric
Miniature Sensor Flat Type Sensing Model Number Legend 1 2 3 4 5 1. Series 4. Output NO: NPN - NO 2. Type PO: PNP - NO T: Through Beam 5. Connection D: Diffuse Reflective 2M: 2m Cable 3. Sensing Distance
Photoelectric Sensors E3F2
Photoelectric Sensors E3F2 Threaded Cylindrical Photoelectric Sensors with Built-in Amplifier for Use as an Optical Proximity Switch M18 DIN-sized cylindrical housing Housing materials: plastic, nickel
Setting method Indication Control Output Model method mode Thermocouple (with sensor burnout detection circuit)
Temperature Controller DIN-sized (48 x 48 mm) Temperature Controller With Digital Setting Compact, low-cost Temperature Controller Incorporates proportional adjustment and reset adjustment function. Incorporates
OTB1E0DM9LP I/O distributed module OTB - Ethernet TCP/IP m
Characteristics I/O distributed module OTB - Ethernet TCP/IP - 0..100 m Main Range of product Product or component type Integrated connection type Mar 31, 2018 Modicon OTB I/O distributed module Discrete
Part Number Total I/O Power Voltage Input Voltage Output Type Maximum Digital I/O Maximum Analog I/O V AC Relay 24V DC.
MicroSmart FC6A PLC CPU Module Specifications KEY FEATURES Embedded Ethernet port Embedded SD memory port Modbus TCP and RTU Embedded RS232C/RS485 user selectable Maximum 520 digital I/O Maximum 126 analog
Syr-line TMR48D Digital Timer
yr-line MR48D Digital imer Front Panel 48x48 (1/16 DIN) Large LED or LCD creen (13.2 mm) Multi-function and single-function Basic & Advance configuration modes Multi-range (0.05s-9999h) Multi-voltage (24-240V
PRODUCT SPECIFICATION. PC Board Relays. Series.
PRODUCT SPECIFICATION PC Board Relays 26 Series www.wernerelektrik.com Technical Data... Specifications...2 Model Number Structure - Relays...3 Model Number Selection...4 Dimensions... 5-6 Accessories...7
H7ER H7ER-V H7ER-V1 H7ER-V2 H7ER-V3
Tachometers Subminiature Tachometer Requires No External Power Supply Subminiature 8 x 2 mm (1.89 x.9 in) Improved noise immunity Screw terminal and wire-wrap types available DC, and no-voltage input Printed
Temperature Controller E5C4
Temperature Controller 1/16 DIN Sized, Digital-Set Controller Features Easy-to-Read LED Display Proportional-derivative (PD) control or ON/OFF control models Front panel offset adjustment on PD controllers
MOS FET Relay. Ordering Information. Application Examples G3VM- XN(F)/4N(F)
MOS FET Relay G3VM- XN(F)/4N(F) SSR for Switching Analog Signals, with an I/O Dielectric Strength of 2.5 kvac Using Optical Isolation Switches minute analog signals. Linear voltage and current characteristics.
RE11RAMU on-delay timing relay - 1 s..100 h V AC - 1 OC
Characteristics on-delay timing relay - 1 s..100 h - 24..240 V AC - 1 OC Complementary Contacts material Width pitch dimension Control type Voltage range Connections - terminals Housing material Main Range
Solid-state Timer. Ordering Information. Specifications. Miniature Timer Compatible with the MY Relay. Accessories. Time Ranges
Solid-state Timer Miniature Timer Compatible with the MY Relay Large transparent time-setting knob facilitates time setting. Flat-blade and Phillips screwdrivers can also be used for time setting. Approved
H3CR-H. Solid-state Power OFF-delay Timer. Ordering Information. DIN 48 x 48-mm Solid-state Power OFF-delay Timer
Solid-state Power OFF-delay Timer H3CR-H DIN 48 x 48-mm Solid-state Power OFF-delay Timer Long power OFF-delay times; S-series: up to 12 seconds, M-series: up to 12 minutes. Models with forced-reset input