Visualize the actual worksite status! Simple and Intelligent I/O Slave Units.

Transcription

1 Digital I/O Slave Units with Screw Terminal Blocks (2-tier Terminal Block/Relay Output/SSR Output) Visualize the actual worksite status! Simple and Intelligent I/O Slave Units. In addition to the Digital I/O Slave Unit's basic digital ON/OFF signals, collect useful information from the Slave Unit to improve equipment operating rates and maintainability. Communications connector and removable I/O terminal block enable faster startup times and improved maintainability. One Expansion Unit can be added to each Digital I/O Slave Unit to increase system configuration flexibility. Collect various preventive maintenance data required to improve productivity, such as information on equipment deterioration due to aging and equipment operating time data. Simplify startup with the communications power supply monitoring function. Ordering Information Name s Inputs inputs Two-tier Screw Terminal Block Screw Terminal Block with Relay Inputs inputs Inputs/ inputs/ Screw Terminal Block with SSR CRT1-ID CRT1-ID-1 CRT1-OD CRT1-OD-1 CRT1-ID * CRT1-ID-1 * CRT1-OD * CRT1-OD-1 * CRT1-MD CRT1-MD-1 CRT1-ROS Contacts CRT1-ROS CRT1-ROF SSR CRT1-ROF * These Units are also available with a DCN-TB4 Terminal Conversion Adapter included in the package. Add "(-B)" to the end of the model number to receive the Adapter as well. Expansion Units One Expansion Unit can be combined with one Digital I/O Slave Unit (CRT1-ID(-1), CRT1-OD(-1), CRT1-ROS, or CRT1-ROF). The following Expansion Units are available. They can be combined in various ways for flexible expansion. Input capacity Output capacity XWT-ID DC inputs () I/O points XWT-ID-1 DC inputs () XWT-OD transistor outputs () XWT-OD-1 transistor outputs () XWT-ID DC inputs () XWT-ID-1 DC inputs () XWT-OD transistor outputs () XWT-OD-1 transistor outputs () Digital I/O Slave Units with Screw Terminal Blocks (2-tier Terminal Block/Relay Output/SSR Output) CRT1-@D(-1)/@D(-1)/ROS@/ROF@ 33

2 Performance s for CRT1-ROS/ROS (with relay outputs) and CRT1-ROF/ROF (with SSR outputs) For Basic Performance s of Slave Units, refer to page 32. Relay Output SSR Output 14 to 26.4 VDC 14 to 26.4 VDC Noise immunity Conforms to IEC , 2 kv (power line). Noise immunity Conforms to IEC , 2 kv (power line). Vibration resistance 1 to 6 Hz with double-amplitude of.7 mm, 6 to 15 Hz and 5 m/s2 in X, Y, and Z directions for min each Shock resistance 15 m/s2 (3 times in 6 directions on 3 axes) Vibration resistance 1 to 55 Hz with double-amplitude of.7 mm Shock resistance 1 m/s2 (3 times in 6 directions on 3 axes) Dielectric strength 5 VAC (between isolated circuits) Insulation resistance 2 MΩ min. (between isolated circuits) Ambient operating temperature 1 to 55 C Ambient operating humidity 25% to 5% (with no condensation) Ambient operating atmosphere No corrosive gases Storage temperature 25 to 65 C Storage humidity 25% to 5% (with no condensation) Terminal block screws tightening torque M3 wiring screws:.5 N m M3 mounting screws:.5 N m Dielectric strength 5 VAC (between isolated circuits) Insulation resistance 2 MΩ min. (between isolated circuits) Ambient operating temperature 1 to 55 C Ambient operating humidity 25% to 5% (with no condensation) Ambient operating atmosphere No corrosive gases Storage temperature 25 to 65 C Storage humidity 25% to 5% (with no condensation) Terminal block screws tightening torque M3 wiring screws:.5 N m M3 mounting screws:.5 N m Input Section s Eight-point Input Units (2-tier Terminal Block) Sixteen-point Input Units (2-tier Terminal Block) CRT1-ID inputs CRT1-ID-1 CRT1-ID inputs CRT1-ID-1 ON ON OFF OFF OFF current 1. ma max. OFF current 1 ma max. Input current At 24 VDC: 6. ma max./input At 17 VDC: 3. ma min./input Input current At 24 VDC: 6. ma max./input At 17 VDC: 3. ma max./input inputs/common inputs/common Input indicator Input indicator mounting 3 ma max. for 24-VDC power supply 5 ma max. for 14-VDC power supply 55 ma max. for 24-VDC power supply 5 ma max. for 14-VDC power supply I/O power supply 5 ma max. for 24-VDC power supply I/O power supply 5 ma max. for 24-VDC power supply 34 g max. 141 g max. Digital I/O Slave Units with Screw Terminal Blocks (2-tier Terminal Block/Relay Output/SSR Output) CRT1-@D(-1)/@D(-1)/ROS@/ROF@

3 Output Section s Eight-point Output Units (2-tier Terminal Block) Sixteen-point Output Units (2-tier Terminal Block) CRT1-OD CRT1-OD-1 CRT1-OD CRT1-OD-1 Rated output current.5 A/output, 2 A/common Rated output current.5 A/output, 4 A/common Residual 1.2 V max. (.5 A the G Residual 1.2 V max. (.5 A the G Leakage current.1 ma max. Leakage current.1 ma max..5 ms max..5 ms max. /common /common Output indicators Output indicators mounting Communications power supply 35 ma max. for 24-VDC power supply 55 ma max. for 14-VDC power supply 55 ma max. for 24-VDC power supply 5 ma max. for 14-VDC power supply 1.2 V max. (.5 A the V 1.2 V max. (.5 A the V I/O power supply 15 ma max. for 24-VDC power supply I/O power supply 15 ma max. for 24-VDC power supply Output handling for communications Hold or clear can be selected. (CXIntegrator) Output handling for communications 141 g max. g max. Eight-point Output Units (Relay ) Sixteen-point Output Units (Relay ) (per Output) CRT1-ROS CRT1-ROS Mounted Relays DRTA-NY5W-K (5 VDC) Mounted Relays DRTA-NY5W-K (5 VDC) Rated load Resistive load 25 VAC, 2 A, common: A 3 VDC, 2 A, common: A Rated load Resistive load 25 VAC, 2 A, common: A 3 VDC, 2 A, common: A Rated ON current Rated ON current Maximum contact 25 VAC, 125 VDC Maximum contact 25 VAC, 125 VDC Maximum contact current Maximum contact current Maximum switching capacity 75 VA AC, 9 W DC Maximum switching capacity 75 VA AC, 9 W DC Minimum applicable load (reference value) 5 VDC, 1 ma Minimum applicable load (reference value) 5 VDC, 1 ma Mechanical service life 2,, operations min. Mechanical service life 2,, operations min. Electrical service life 1, operations min. Electrical service life 1, operations min. method mounting 95 ma max. for 24-VDC power supply 15 ma max. for 14-VDC power supply 155 ma max. for 24-VDC power supply 255 ma max. for 14-VDC power supply Hold or clear can be selected. (CXIntegrator) 17 g max. 26 g max. Digital I/O Slave Units with Screw Terminal Blocks (2-tier Terminal Block/Relay Output/SSR Output) CRT1-@D(-1)/@D(-1)/ROS@/ROF@ 35

4 Eight-point Output Units (SSR ) (per Output) Sixteen-point Output Units (SSR ) (per Output) CRT1-ROF Load 24 to 265 VAC Load 24 to 265 VAC Load current.3 A Load current.3 A Inrush current resistivity 5 A (6 Hz) Inrush current resistivity 5 A (6 Hz) method mounting 6 ma max. for 24-VDC power supply 9 ma max. for 14-VDC power supply 5 ma max. for 24-VDC power supply 13 ma max. for 14-VDC power supply Hold or clear can be selected. (CXIntegrator) g max. 25 g max. Note: The SSRs cannot be replaced. CRT1-ROF Note: The SSRs cannot be replaced. Load current (A) Load Current vs. Ambient Temperature Ambient temperature ( C) 36 Digital I/O Slave Units with Screw Terminal Blocks (2-tier Terminal Block/Relay Output/SSR Output) CRT1-@D(-1)/@D(-1)/ROS@/ROF@

5 Input and Output Section s Eight-point Input and Eight-point Output Units (2-tier Terminal Block) CRT1-MD/CRT1-MD-1 Common s CRT1-MD CRT1-MD-1 35 ma max. for 24-VDC power supply 6 ma max. for 14-VDC power supply 17 g max. Input Section s Output Section s CRT1-MD inputs CRT1-MD-1 CRT1-MD CRT1-MD-1 the G Rated output current.5 A/output, 2A/common ON the V Residual the V the G 1.2 V max. (.5 A the G Leakage current.1 ma max..5 ms max. 1. ma max. Input current At 24 VDC: 6. ma max./input At 17 VDC: 3. ma min./input /common inputs/common Input indicator I/O power supply 5 ma max. for 24-VDC power supply OFF OFF current 1.2 V max. (.5 A the V Output indicators I/O power supply 15 ma max. for 24-VDC power supply Output handling for communications Digital I/O Slave Units with Screw Terminal Blocks (2-tier Terminal Block/Relay Output/SSR Output) CRT1-@D(-1)/@D(-1)/ROS@/ROF@ 37

6 Dimensions (Unit: mm) CRT1-ID (-1) CRT1-OD (-1) CRT1-ID (-1) CRT1-OD (-1) CRT1-MD (-1) Digital I/O Slave Units with Screw Terminal Blocks (2-tier Terminal Block/Relay Output/SSR Output) CRT1-@D(-1)/@D(-1)/ROS@/ROF@

7 CRT1-ROS CRT1-ROF CRT1-ROS CRT1-ROF Digital I/O Slave Units with Screw Terminal Blocks (2-tier Terminal Block/Relay Output/SSR Output) CRT1-@D(-1)/@D(-1)/ROS@/ROF@ 39