LBTKG-CO462 TKG-CO2 SERIES. Carbon Dioxide Detector/Controller. Features. Professional Design & Manufacture CO 2 Controllers.

Transcription

1 LBTKG-CO46 TKG-CO SERIES Carbon Dioxide Detector/Controller Professional Design & Manufacture CO Controllers Wall mounted Features Special used to real-time detect CO level in air ducts. NDIR infrared CO sensor inside with Self-Calibration and up to 15 years lifetime High accuracy humidity and temperature detection &display optional With LCD or without LCD selectable Providing one dry contact output with presetting the setpoint Modbus RS485 communication interface optional Wireless of ZigBee protocol optional Smart structure with easier wire connection through the external pipe Provide four types: wall mounted, duct mounted, split and plug & play For plug & play type, special design a photosensor inside to detect day/night and change the working mode of the CO generator For duct probe type, special the 180 rotatable fastness position of the probe can be used in two directions of air flow. Replaceable filter in the probe and extendable probe length Design the convenient and easier buttons for operation CE-Approval Duct probe mounted Wall mounted with plug & play Split controller and sensor 1

2 Specifications CO Sensor Non-Dispersive Infrared Detector (NDIR) Measurement Range 0~,000ppm (default) 0~5,000ppm (preset) Accuracy ±30ppm + 3% of (7 ) Stability Calibration <% of full scale over the life of the sensor Self-calibration system Response Time <5 minutes for 90% step change at low duct speed Non-linearity <1% of full (7 ) Duct Air Velocity Pressure Dependence Warm up time Split CO sensor 0~450m/min 0.135% of reading per mm Hg hours (first time) minutes (operation) meter cable connection between the senor and the controller Temperature & Humidity Detection&Display (optional) Temperature Relative Humidity Sensing element: Band-gap-senor Capacitive humidity sensor Measuring range -0 ~ %RH Accuracy ±0.5 (0~40 ) ±4.5%RH (5, 15%-85%RH) Display resolution %RH Stability ±0.1 per year ±1%RH per year General Data Power supply Consumption LCD display Dry contact output (optional) Plug& play type Modbus RS485 Interface (optional) Wireless module (optional) 4VAC/4VDC or 100VAC~40VAC 1.8 W max. ; 1.0 W avg. Display CO measurement or CO + temperature& humidity measurements 1xdry contact output for CO Max. 5A (100~40VAC/30VDC)rated switch contact Just for 100VAC~40VAC power supply with European or American power plug and power connector to the CO generator 1900bps, 15KV antistatic protection. ZigBee.4G short distance wireless communication Operation conditions -0 ~50 (3~1 ); 0~99%RH, non condensing Storage conditions Net weight IP class Standard Approval 10~50 (-40~158 )/ 10~70%RH 80g IP30 CE-Approval

3 Typical Applications In office and residence areas to detect CO level Ventilation control In BAS to detect the CO and the data transmittance For greenhouse and plant bin For CO laboratory Demensions & Mounting Duct mounted Probe Length mm (can be extended to mm) Probe Diameter Ø6.00mm Wall mounted probe Length Probe Diameter 69.00mm Ø6.00mm Split sensor Connection cable Length.0m Sensor Probe Diameter Ø6.00mm 3

4 Wall mounting with plug&play probe Length 69.00mm Probe Diameter Ø6.00mm Power cable 1 Cable to device mm Power plug/socket European American Power input side VAC/5A Diameter: 3 * 1.5 mm And wire length: 1100 mm Models Guide LBTKG TKG- - CO46 CO- A 0 C D Y TH-PPX Control equipment side VAC/5A Diameter: 3 * 1.5 mm And wire length: 700 mm A:the sensor installation type 1: wall mounted with the external adown probe sensor : probe duct mounted 3: split sensor with meters cable connection 4: probe duct type with extended probe (09mm) C:relay dry contact output 0: no dry contact output 1: 1xdry contact output D:Modbus interface 0: no communication 1: Modbus RS485 interface : with ZigBee wireless module (will be provided in the future) Y:power supply C: 4VDC/VAC power supply D: 100~40VAC power supply -TH temperature & RH detection and display No TH indicates without temperature & RH detection and display 4

5 -PPX Plug and play for wall mounting type No PP indicates without plug & play installation PPE means European standard plug PPA means American standard plug Note: The option TH and PP is alternative. Wiring Diagram Power supply 85-40Vac 4 3 OP ON B A RS GO G+ Shipping Information Wall Mounting Type (not for plug&play type) Duct Type Indiv. Ctn. Dim 180mm 130mm 60mm Indiv. Ctn. Dim 185mm 130mm 110mm Master Ctn. Qty 3 Master Ctn. Qty 0 Master Ctn. Dim 50cm(L) X4cm (W) X35cm (H) Master Ctn. Dim 50cm(L) X4cm (W) X35cm (H) Master Ctn. Wt. (volume weight) 15.0KG Master Ctn. Wt. (volume weight) 15.0KG 5