Flowtronic D 607 Series

Transcription

1 Flowtronic D 607 Series Proportional Technology

2 FLOW CONTROL: 607 SERIES FLOWTRONIC D Flowtronic D Flowtronic D is a digitally operated flow controller up to 70 SCFM (2000 Nl/min). The Flowtronic D consists of a fast, direct-operated 2-port proportional valve that operates independently of the inlet pressure (max. 116 psi), and a control unit which contains all of the control electronics and sensors. The Flowtronic D offers precise flow adjustment and is very responsive to outside disturbances. Typical applications for the Flowtronic D include: Paint coating technology, mixing of gases in process control, packaging and food processing industry, surface finishing and materials coating processes, burner control systems, and fuel cell technology. The digital control electronics and a USB interface allow the controller to be adapted to different applications. The ASCO FlowCom PC software provides easy start-up. Digital Communication Display Electronics Solenoid Sensors Direct Operated 2

3 Step Test Function Ramp Test Function Parameters Setup Scope Setup By connecting the Flowtronic D to a PC with a USB interface, the Numatics FlowCom software can be used to optimally adjust the valve's control parameters to a specific application. FlowCom software has an oscilloscope function that allows the user to select and visually see various response characteristics as the flow controller operates in an application. Control loop parameters can be adjusted using the software without removing the flow controller from service. This functionality streamlines the application development process. Control parameters can be saved and reloaded at any time. The ASCO FlowCom software offers the following features: Real time display of: command signal, outlet pressure, internal control parameters (e.g. P, I or D), pressure switch signal, etc. Parameter setting: command signal, zero offset, span, limitation of output current, ramp function, etc. Diagnostics menu for error detection and testing Custom adjustment to an application Control of Flowtronic D Advantages Low hysteresis Quick response times Very high sensitivity Standard 50 µm filtration Analog feedback output Easy change of control parameters Digital control Integrated display (optionally without) PC communication 3

4 Flowtronic D The Flowtronic D consists of a fast, direct-acting 2-port proportional valve, a pressure sensor unit and digital control electronics Controls applications that have varying flow Controls and maintains constant and even flow despite external disturbances such as fluctuating inlet pressure Measures flow precisely with two sensors Software and PC connection allows parameters to be adjusted to a specific application FlowCom software provides quick and easy start-up Diagnostic capability using the integrated LEDs or the FlowCom software Fluids Ambient Temperature Body Internal Parts Seals Air or neutral gas, filtered at 50 µm, condensate-free, lubricated or unlubricated 0 C to 40 C (32 ºF to 104 ºF) Aluminum Aluminum, stainless steel and brass NBR (nitrile) General Valve Information Minimum allowable pressure Maximum allowable pressure (MAP) Control range Fluid Temperature Pressure Range Ports Construction 5 bar (58 psi) 8 bar (116 psi) SCFM, ( Nl/min) (ANR) 0 C to 50 C (32 ºF to 122 ºF) up to 116 psi (8 bar) 1/4, 3/8, 1/2 NPT or GTap Poppet valve Command signal - analog 0 10 V (100 kω), 0 20 ma, 4 20 ma (resistance 250 Ω) Feedback output - analog 0 10 V, 0 20 ma, 4 20 ma (max. load 500 Ω) Hysteresis ± 3% Linearity/pressure measurement ± 3% Repeatability ± 1.5% Response time Calibration conditions Nominal diameter Other features Ambient temperature Fluid < 200ms 22.5 ºC ± 2.5 ºC (72.5 ºF ± 4.5 ºF) Air 3mm, 5mm, 6mm Auto-tune, error display by LED Electrical Characteristics Nominal Diameter DN (mm) Up to 1000 NI/ min Voltage * Max. Power (W) Max. Current (ma) Insulation Class Degree of Protection 24 VDC = ± 10% H IP NI/min 24 VDC = ± 10% H IP65 * Max. ripple: 10% Electrical Connection - 5-pin M12 connector - USB connection with 4 pin M12 connector - 5-pin M12 connector - USB connection with 4 pin M12 connector 4

5 How to Order Version (ports), Body/Display 0 = (GTap) without display* 1 = (GTap) with display* 2 = 1/2 (GTap) without display 3 = 1/2 (GTap) with display 6 = (NPT) without display* 7 = (NPT) with display* 8 = 1/2 (NPT) without display 9 = 1/2 (NPT) with display Command Signal 0 = 0 10 Volt 1 = 0 20 ma 2 = 4 20 ma Feedback 1 = Feedback output Volt 2 = Feedback output ma 3 = Feedback output ma 4 = Feedback input 0 10 Volt 1) 5 = Feedback input 0 20 ma 1) 6 = Feedback input 4 20 ma 1) Options A00 = Dual loop control Flow Regulation Range 10 = SCFM ( Nl/min) 20 = SCFM ( Nl/min) 30 = SCFM ( Nl/min) 50 = SCFM ( Nl/min) 60 = SCFM ( Nl/min) 99 = SCFM ( Nl/min) (3/8 - Versions 0, 1, 6 or 7 only) 20 = SCFM ( Nl/min) (1/2 - Versions 2, 3, /8 or 9 only) Digital I/O 1 = Pressure switch output PNP ± 5% Notes: * Port size depends on flow range (1/4 or 3/8) 1) Feedback input is needed for dual loop units. Connector Pin Out 1 4 Pin Description VDC Supply 5 2 Command Signal 3 +0 VDC Common (Supply) VDC Common (Command Signal)* 4 Analog output (feedback) 5 Digital output (pressure switch) Body EMC shield * A 6-wire cable with separate common for the command signal is used for cable lengths over 2m to minimize the voltage drop for the command signal. 5

6 Dimensions: inches (mm) Weight: 1.85kg (4.08lbs) 0.20 (5) 7.95 (202) M4 for ground screw M12x1 connector M12x1 USB connector 0.43 (11) 1.38 (35) 4.66 (118.3) 5.10 (129.6) 0.83 (21) 1.97 (50) 0.09 (2.35) Mounting with 4xM4 screws from top or 4xM5 from bottom 5.48 (139.2) 6.22 (158) 7.13 (181) 1/4, 3/8, 1/2 NPT or GTap 8.35 (212) 1/4, 3/8, 1/2 NPT or GTap Accessories 5 Pin 12mm FEMALE Straight Field Attachable Connectors Model number PG 9 Cable Gland TC05F Pin 12mm FEMALE 90 DEGREE Field Attachable Connectors PG 9 Cable Gland TD05F Micro Female 5 Pole Straight 6 Wire 24 AWG, Shielded 3 Meter TC0503MMS000671Y 5 Meter TC0505MMS000671Y Micro Female 5 Pole 90 Degree 6 Wire 24 AWG Euro Color Code, Shielded 3 Meter TD0503MMS000671Y 5 Meter TD0505MMS000671Y PC Software & Cable Connector Model number Flowtronic D software "ASCO-FlowCom-Light" - free download at asco.com Flowtronic D software "ASCO-FlowCom-Expert" - CD-ROM Consult Factory USB cable for connection of Flowtronic D to PC