80265 series, 3/2 Indirect solenoid actuated poppet valve

Transcription

1 > > Port size: G/... G > > High flow rate > > Optionally air pilot operated > > High repeatability of switching time > > Variable valve solenoid combination Technical features Medium: Compressed air, filtered, lubricated or non-lubricated Operation: Indirect solenoid operated poppet valve Operating pressure: bar ( psi) Orifice: mm Port size: G/, G3/4, G, G /, G Flow direction: Fixed Mounting position: Any, but preferably with solenoid vertical In severe shocks solenoid vertical perpendicular to the axis of oscillation Ambient/Media temperature: C ( F) Air supply must be dry enough to avoid ice formation at temperatures below + C (+35 F) Material: Body: Aluminium Seals: PUR Inner parts: POM Technical data Symbol Port size 3 Orifice (mm) Pilot supply Flow (l/min) Operating pressure Pilot pressure (kg) *) G/ G/ G3/4 5 Internal , G3/4 G3/4 G 0 Internal , G G G 5 Internal , G G /4 G /4 3 Internal , G / G / G / 40 Internal , G G G 50 Internal , G/ G/ G3/4 5 Internal , G3/4 G3/4 G 0 Internal , G G 5 Internal , G G /4 G /4 3 Internal , G / G / G / 40 Internal , G G G 50 Internal , G/ G / G3/4 5 External , G3/4 G3/4 G 0 External , G G G 5 External , G G /4 G /4 3 External , G / G / G / 40 External , G G G 50 External , G/ G/ G3/4 5 External , G3/4 G3/4 G 0 External , G G G 5 External , G G /4 G /4 3 External , G / G / G / 40 External , G G G 50 External , *) When ordering please indicate solenoid, voltage, current type (frequency). without notice, the specifications given in this document. ( e) 05 Norgren GmbH en

2 s for vacuum Symbol Port size 3 Orifice (mm) Pilot supply Flow (l/min) Operating pressure Pilot pressure (kg) *) G/ G/ G3/4 5 External , G3/4 G3/4 G 0 External , G G G 5 External , G G /4 G /4 3 External , G / G / G / 40 External , G G G 50 External , *) When ordering please indicate solenoid, voltage, current type (frequency). Solenoids group 6D, standard voltages Power consumption 4 V d.c. 30 V a.c. (W) (VA) Rated current 4 V d.c. 30 V a.c. (m A) (m A) Protection class IP/NEMA 6,9 703 IP65 (with connector) 7,3 75 IP65 (with connector),4 475 IP66 (with cable gland) 5, 66 IP66 (with cable gland) 3,6 567 NEMA 4, 4X, 6, 6P, 7, 9 5,7 68 NEMA 4, 4X, 6, 6P, 7, 9 Ex-Protection (ATEX-Category) Temperature Ambient/ Media ( C) Media: +80 max Media: +80 max II G Ex e mb IIC T4/ T5 Gb II D Ex tb IIIC T30 C Db IP66 II G Ex e mb IIC T4/ T5 Gb II D Ex tb IIIC T30 C Db IP66 XP/DIP, Div. & CI. I, Gr. A-D CI. II/III, Gr. E-G T3 (60 C) XP/DIP, Div. & CI. I, Gr. A-D CI. II/III, Gr. E-G T3 (60 C) T4: T5: T4: T5: Electrical connection Connector DIN EN , form A *) Connector DIN EN , form A *) Flying leads 450 mm Flying leads 450 mm Drawing Circuit diagram (kg) No. No. 0, , M0 x,5 *) 0, M0 x,5 *) 0, , , Standard voltages (±0%) 4 V d.c., 30 V a.c., other voltages on request. Design according to VDE 0580, EN 5004/ % duty cycle. *) Connector/cable gland is not scope of delivery, see table»accessories«attention: The protection class for coil series 46xx and 48xx is determined by the choice of cable gland. Example: if an ATEX-certified cable gland is used that has Ex d type of protection, the solenoid will have the protection class Ex d mb; if a cable gland with Ex e type of proteciton is used, the solenoid will have protection class Ex e mb. Accessories Electrical connection Cable gland Protection class Ex e, Ex d Page 7 Thread Cable Ø (mm) Materials Protection class (ATEX) M0 x, Nickel plated brass II GD Ex e M0 x, Nickel plated brass II GD Ex d M0 x, Stainless steel.457 (36 Ti) II GD Ex e M0 x, Stainless steel.4404 (36 L) II GD Ex d M0 x, Stainless steel.4404 (36 L) II GD Ex d M0 x, Plastic (PA) M0 x, Plastic (PA) en without notice, the specifications given in this document. ( e) 05 Norgren GmbH

3 Drawing - Valve R Dimensions in mm Projection/First angle E S F C U B P G/4 ø K D 3 L A T J N G M H Solenoid can be indexed by 4 x 90 A B C D E F G H J Ø K L M P R S T U G/ G/ G3/4 87, ,5 5 63, , G3/4 G3/4 G 97,5 5,5 8, , , G G G 97,5 5,5 8, , , G G /4 G / G / G / G / ,5 4,5 70 5, G G G G/ G/ G3/4 00, ,5 5 63, , G3/4 G3/4 G 0,5 5,5 8, , , G G G 0,5 5,5 8, , , G G /4 G / G / G / G / ,5 4,5 70 5, G G G without notice, the specifications given in this document. ( e) 05 Norgren GmbH en

4 Drawings - Solenoids Dimensions in mm Projection/First angle ,5 53, , , M6 x, , M6 x, / NPT 64, ± 0, 63 33,5 6 4 Connector can be indexed by 4x90 Ø 6 or 3 (with spacer tube) 4 Flying leads AWG 8 (450 mm long) Circuit diagrams en without notice, the specifications given in this document. ( e) 05 Norgren GmbH

5 Cable gland C B A D A B C ø D M0 x, M0 x,5 6,5 7, M0 x, M0 x, M0 x, M0 x, M0 x, Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under»technical features/data«. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult IMI NORGREN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. without notice, the specifications given in this document. ( e) 05 Norgren GmbH en