duagon D201 ISA to PC/104 adapter Data Sheet

Transcription

1 duagon This document describes the d0 ISAto- PC/0 bus adaoter. It is intended mainly for lab use. The widely spread PCs support a test and diagnostic platform for software development. Data Sheet D0 ISA to PC/0 adapter

2 Page / d duagon On having purchased products described in this data sheet, the customer acquires the right to use the products according to its specified purpose and in accordance with all operation, service and maintenance instructions. All other rights to the product, Duagon's intangible assets rights in particular, belong solely to Duagon and may not be deemed to have been assigned along with the sale of the products. All product properties are fully described in the data sheet under express exclusion of any warranty for other properties. Of decisive relevance is the data sheet valid at the time of the order being placed. Duagon provides a warranty that the product properties are retained during the period of warranty. Evidence that the properties of the product have been retained will be brought, always and exclusively, on Duagon premises by means of a test construction pursuant to the type test. The customer is obliged to inspect whether the products themselves are suitable for the application intended. In particular, that inspection must include the integration of the products into the intended system configuration and a check on whether the properties as per data sheet can be fulfilled once integrated into the system configuration as planned by the customer. Since the products are not certificated for operation with security applications, the customer must take appropriate measures to ensure that any malfunctions that may occur in a system configuration with other products will be absorbed by supplementary security measures. The period of warranty for the products is months and it begins on the date the products are shipped from the factory. The warranty that Duagon assumes for the products will, at Duagon's discretion, be limited either to the repair of or the replacement of the products at the Duagon factory. The warranty solely covers the products or parts thereof which, despite professional handling, have become defective or unusable and which arrive at the Duagon factories for repair or replacement during the period of warranty. The extent of Duagon's warranty is fully set out in this data sheet. Duagon cannot be held liable for consequential damage caused by a defect or for indirect damage or for consequential damage of any kind. Therefore the customer bears all and any costs that occur due to production downtime, for example, or due to the installation or dismantling of products or due to their transportation to Duagon and back. Duagon's liability and warranty do not obtain if evidence cannot be brought that the products were being operated according to its specified purpose and in accordance with all operation, service and maintenance instructions as issued by Duagon. These provisions form an integrated part of the product properties. Duagon products cannot be acquired with other or more extensive degrees of warranty and liability on the part of Duagon. This data sheet is to be evaluated in accordance with Swiss law. The court of jurisdiction is the seat of the vendor. The applicability of the UN agreement as to international sales of goods (also known as "Viennese Purchasing Convention") is herewith expressly excluded. Duagon GmbH, Badenerstrasse, CH-9 Dietikon. Phone + 0; Fax + 0; Document history Rev. Date Author Comments Ident-Number April 9 th, 00 Schlage first release d duagon GmbH Badenerstr. CH-9 Dietikon

3 duagon d Page / Introduction This document describes the d0 ISA-to- PC/0 bus adaoter. It is intended mainly for lab use. The widely spread PCs support a test and diagnostic platform for software development. Functional parts The d0 is foreseen to be used together with the -PC carrier mounting option of duagon boards dl- series and d- series. Optionally, the d0 may be used with PC/0 modules with stackthrough pins. In this case, a -PA or -PB version of the dl/d is mounted on the opposite side. Since this is completely optional to the placement of the PCboard, the d0 may carry boards in total. Please note, that this arrangemant requires an additional connector bezel and matching cables. Even though there are additional boards possible from the mechanical point of view,we do not recommend to assemble more than PC/0- boards on the d0, since the maximum power supply current on one single connector pin may be exceeded. Please find enclosed in the Appendix a complete set of schematics and assembly information. Mounting bolts x First MVB Second MVB PC/0 RS Second serial MVB ISA bus duagon GmbH Badenerstr. CH-9 Dietikon

4 Page / d duagon Use with PC board The picture below shows the preferably mounting style with a -PC board from duagon. Obviously, the serial line interface makes sense for d- boards, only. On dl, there is no serial line. Please note, that the d board is mounted closer to the d0 as intended by the PC/0 standard. duagon GmbH Badenerstr. CH-9 Dietikon

5 duagon d Page / Use with PB board An optional mounting style is shown in the picture below. The d shown here may be the second PC/0- board (the first one located on the opposite side): This mounting style supports duagon PC/0 boards of the mechanical type -PA and -PB. Please note: This mounting place requires to use an additional slot in your PC for mounting the additional connector bezel. The following parts are required in addition to the standard d0 scope of delivery: Alternate connector bezel set with mounting bracket and two cables (please specify the type of connector as header for PA- boards or subd for PB- boards). Alternate set of four distance bolts (in order to securely fasten the PC/0- board on the d0; not shown in the picture) duagon GmbH Badenerstr. CH-9 Dietikon

6 A B C D D C B A Title: Doc number: Date of printing: Rev.: File name: Sheet: Drawn by: Signature: Company: Address: d Aug-00 C:\data\d0\PCB\d0.ddb - Documents\Carrier\schema\d0_top.sch Thomas Schlage duagon GmbH Badenerstr. CH-9 Dietikon Phone + 00 Fax + 0 d0 PC0-ISA Bus Adapter Karte of :: IOCHCHK A SD A SD A A SD A SD A SD A SD A SD A SD0 A9 IOCHRDY A0 AEN A SA9 A SA A SA A SA A SA A SA A SA A SA A9 SA A0 SA0 A SA9 A SA A SA A SA A SA A SA A SA A SA A9 SA A0 SA0 A X0ABA PC0/A B RESET B B IRQ9 B -V B DRQ B -V B ENDXFR B +V B9 SMEMW B SMEMR B IOW B IOR B DACK B DRQ B DACK B DRQ B REFRESH B9 CLK B0 IRQ B IRQ B IRQ B IRQ B IRQ B DACK B TC B BALE B B9 OSC B0 B B X0ABB PC0/B C0 SBHE C LA C LA C LA C LA0 C LA9 C LA C LA C MEMR C9 MEMW C0 SD C SD9 C SD0 C SD C SD C SD C SD C SD C X0CDA PC0/0C D0 MEMCS D IOCS D IRQ0 D IRQ D IRQ D IRQ D IRQ D DACK0 D DRQ0 D9 DACK D0 DRQ D DACK D DRQ D DACK D DRQ D D MASTER D D D9 X0CDB PC0/0D IOCHCHK A SD A SD A SD A SD A SD A SD A SD A SD0 A9 IOCHRDY A0 AEN A SA9 A SA A SA A SA A SA A SA A SA A SA A9 SA A0 SA0 A SA9 A SA A SA A SA A SA A SA A SA A SA A9 SA A0 SA0 A SBHE C LA C LA C LA C LA0 C LA9 C LA C LA C MEMR C9 MEMW C0 SD C SD9 C SD0 C SD C SD C SD C SD C SD C PA ISA_CONN_EDGE B RESET DRV B +V B IRQ B -V B DRQ B -V B 0WS B SMEMW B SMEMR B IOW B IOR B DACK B DRQ B DACK B DRQ B REF B9 CLK B0 IRQ B IRQ B IRQ B IRQ B IRQ B DACK B TC B ALE B +V B9 OSC B0 B MEMCS D IOCS D IRQ0 D IRQ D IRQ D IRQ D IRQ D DACK0 D DRQ0 D9 DACK D0 DRQ D DACK D DRQ D DACK D DRQ D +V D MASTER D D +V B9 B0 PB ISA_CONN_EDGE OSC BALE TC DACK/ IRQ IRQ IRQ IRQ IRQ CLK REF/ DRQ DACK/ IOW/ DRQ DACK/ IOR/ SMEMR/ SMEMW/ +V ENDXFR/ -V DRQ -V IRQ9 RESET A0 A A A A A A A A A9 A0 A A A A A A A A A9 AEN IOCHRDY D0 D D D D D D D IOCHCHK/ MASTER/ DRQ DACK/ DRQ DACK/ DRQ DACK/ DRQ0 DACK0/ IRQ IRQ IRQ IRQ IRQ0 IOCS/ MEMCS/ OSC BALE TC DACK/ IRQ IRQ IRQ IRQ IRQ CLK REF/ DRQ DACK/ IOW/ DRQ DACK/ IOR/ SMEMR/ SMEMW/ +V ENDXFR/ -V DRQ -V IRQ9 RESET SD SD SD SD SD SD0 SD9 SD MEMW/ MEMR/ LA LA LA9 LA0 LA LA LA SBHE/ SD SD SD SD SD SD0 SD9 SD MEMW/ MEMR/ LA LA LA9 LA0 LA LA LA SBHE/ MASTER/ DRQ DACK/ DRQ DACK/ DRQ DACK/ DRQ0 DACK0/ IRQ IRQ IRQ IRQ IRQ0 IOCS/ MEMCS/ A0 A A A A A A A A A9 A0 A A A A A A A A A9 AEN IOCHRDY D0 D D D D D D D IOCHCHK/ Fixture hole M Fixture Hole M Fixture hole M Fixture Hole M d0_mvb d0_mvb.sch Fixture hole M Fixture hole M

7 M D MVB_ MVB_ MVB_ MVB_ X 0 9 MVB_9 MVB_ MVB_ MVB_ MVB_ MVB_9 MVB_ MVB_ MVB_ MVB_ MVB_ MVB_ MVB_ MVB_ 9 M X DB9 (right angle) female BOLT_M M BOLT_M D HEADER X MVB lines MVB_SHIELD M M M C MVB_ MVB_ MVB_ MVB_ X 0 9 HEADER X MVB_9 MVB_ MVB_ MVB_ MVB_ MVB_9 MVB_ MVB_ MVB_ MVB_ MVB_ MVB_ MVB_ MVB_ 9 X DB9 (right angle) male BOLT_M M C M BOLT_M X M B RXD TXD DTR X 9 0 HEADER X Serial line DSR RTS CTS DSR RXD RTS TXD CTS DTR 9 B M M9 FRONTBEZEL DB9M_UR M Fixture hole Fixture Hole M A Title: d0 MVB and SER part A Doc number: d Sheet: of Rev.: Date of printing: 0-Aug-00 File name: C:\data\d0\PCB\d0.ddb - Documents\Carrier\schema\d0_mvb.sch :: Company: duagon GmbH Address: Badenerstr. CH-9 Dietikon Drawn by: Andreas Jossi Signature: Phone + 00 Fax + 0

8