CHENBRO. 24-Port 3.5 mini-sas Backplane with Expander 80H A0. User s Manual. December 2012

Transcription

1 CHENBRO 24-Port 3.5 mini-sas Backplane with Expander 80H A0 December

2 Copyright Copyright 2012 Chenbro Micom Co., Ltd.. All rights reserved. Unless otherwise indicated, all materials in this manual are copyrighted by Chenbro Micom Co., Ltd.. All rights reserved. No part of this manual, either text or image may be used for any purpose other than internal use within purchasing company. Therefore, reproduction, modification in any form or by any means, electronic, mechanical or otherwise, for reasons other than internal use, is strictly prohibited without prior written permission. Chenbro Micom Co., Ltd. reserves the right to make improvement and modification to the products indicated in this manual at any time. Specifications are therefore subject to change without prior notice. Information provided in this manual is intended to be accurate and reliable. However, Chenbro Micom Co., Ltd., assumes no responsibility for its use, nor for any infringements upon the rights of third parties, which may result from its use. Technical Support Chenbro works hard to offer our customers maximum performance from our chassis. But in case you have any problem with our product you can find supports from the following resources. Web Support Detail information of our products is in our website. You can find technical updates, installation guides, FAQs, technical specifications and more. Our web address is:. Support You can also fill out the technical support form at our Technical Support page. You technical issue inquiries will be sent directly to our support professionals. Phone Support You can also contact Chenbro HQ or branch office for immediate support; contact Information is as following: Chenbro HQ Chenbro Europe B.V. Chenbro Micom (USA) Inc. Tel: Tel: Tel: Fax: Fax: Fax : Chenbro UK LTD Chenbro China Office Tel: 44-(0) Tel: Fax:

3 Contents Copyright...2 Technical Support. 2 Contents. 3 Safety Instruction..4 Revision History 4 6Gb/s Backplane Specification 5 Backplane Layout 6~11 Fabricate Sequence..12~17 3

4 Safety Instruction Caution: Informs the user of conditions that might result in damage to hardware, corruption of customer data or application software, or long-term health hazard to people. A caution always precedes the information to which it relates. WARNINGS: Alerts the user to conditions that might result in injury or death. A warning always precedes the information to which it pertains. Revision History Date December/6/2012 First Release Modification 4

5 6Gb/s Backplane Specification P/N: 80H A0 HDD BACKPLANE TOP VIEW Specification Hot Interface Mini-SAS HDD Interface SAS Hot-Swap Yes, allows user to replace Hard Disk drive on line LED indicates Hard Disk Drive status Display Error LED- Red (When HDD is error) Cooling Three Fan Connector Environment Monitor Temperature senor detect (RT1, RT2) 1. SAS Connector 29 P*24 2. Mini-SAS Connector*3 3. ATX 4P Power Connector*2 4. ATX 8P Power Connector*1 Connectors 5. Pin Header 2.54mm (2x3)*1 6. Pin Header 2.54mm (1x4)*1 7. Wafer 2.54mm Connector 2P*2 8. Wafer 2.5mm Connector 2P*1 9. I2C Connector*1 Dimension 356(L)x 202(W)x 2.4(H) mm Material FR4 8 layer 5

6 Fan Connector (JF1~JF3) Pin NO. Description 1 GND 2 12V 3 FAN Clock Input 4 FAN PWM Output RS232 Connector (JC1) Pin Description NO. 1 GND 2 KEY PIN 3 RXD 4 TXD I2C Connector (JC2) Pin Description NO. 1 SDA 2 GND 3 SCL 4 +5V POWER FAIL ALARM Connector (JP1) Pin Description NO. 1 GND 2 Fall signal Input (Active Low) 6

7 POWER FAIL MUTE Connector (JM1) Pin Description NO. 1 MUTE- 2 MUTE Pin Header (JC4) Pin Descriptions Pin NO. Descriptions NO. 1 FAIL LED+ 2 FAIL LED- 3 KEY PIN 4 NC 5 MUTE SW+ 6 MUTE SW- ATX 8P Connector (CN1) Pin Descriptions Pin NO. Descriptions NO. 1 GND 5 12V 2 GND 6 12V 3 GND 7 12V 4 GND 8 12V ATX 4P Connector (CN2~CN3) Pin Descriptions Pin NO. Descriptions NO. 1 GND 3 5V 2 GND 4 5V 7

8 MINI SAS CONNECTOR (CB1~CB3) Pin NO. Descriptions Pin NO. Descriptions A1 GND B1 GND A2 RP1 B2 TP1 A3 RN1 B3 TN1 A4 GND B4 GND A5 RP2 B5 TP2 A6 RN2 B6 TN2 A7 GND B7 GND A8 NC B8 NC A9 NC B9 NC A10 NC B10 NC A11 NC B11 NC A12 GND B12 GND A13 RP3 B13 TP3 A14 RN3 B14 TN3 A15 GND B15 GND A16 RP4 B16 TP4 A17 RN4 B17 TN4 A18 GND B18 GND 8

9 HDD IN Connector (CH011, CH021, CH031, CH041, CH051, CH061, CH071, CH081, CH091, CH101, CH111, CH121, CH131, CH141, CH151, CH161, CH171, CH181, CH191, CH201, CH211, CH221. CH231, CH241) Pin NO. Descriptions Pin NO. Descriptions S1 GND P1 NC S2 RP P2 NC S3 RN P3 NC S4 GND P4 GND S5 TN P5 POWER ENABLE S6 TP P6 GND S7 GND P7 5V PRE- CHARGE S8 NC P8 5V S9 NC P9 5V S10 NC P10 GND S11 NC P11 NC S12 NC P12 GND S13 NC P13 12V PRE- CHARGE S14 NC P14 12V P15 12V 9

10 SW1 FUNCTION SW1-1 & SW1-2: FAN Number Setting SW1-1 SW1-2 FAN OFF OFF ALL FAN OFF (Default) OFF ON FAN1 ON ON OFF FAN1,2 ON ON ON FAN1,2,3 ON SW1-3: NC (Default is OFF) SW1-4: PWM Enable/ Disable Setting SW1-4 PWM ON Enable (Default) OFF Disable SW1-5: TEMP Threshold Setting SW1-5 TEMP ON 65 (Default) OFF 55 SW1-6: SES Enable/ Disable Setting SW1-6 SES ON Enable (Default) OFF Disable SW1-7: CB2 Function Setting SW1-7 CB2 ON Input OFF Output (Default) 10

11 SW1-8: CB3 Function Setting SW1-8 CB3 ON HDD OFF Daisy Chain (Default) 11

12 HDD 1 HDD 9 HDD 17 CONNECTOR SIDE HDD 2 HDD 10 HDD 18 HDD 3 HDD 11 HDD 19 HDD 4 HDD 12 HDD 20 HDD 5 HDD 13 HDD 21 HDD 6 HDD 14 HDD 22 HDD 7 HDD 15 HDD 23 HDD 8 HDD 16 HDD 24 HDD NO. SEQUENCE HDD FAIL LEDS Connectors (left to right): DIP SWITCH (SW1) PSU Fail LED/mute (JC4) PSU mute (JM1) PSU alarm (JP1) Fan connector (JF1~JF3) Power source (CN2,CN3) Power source (CN1) mini SAS connector (CB1~CB3) RS232 connector (JC1) I2C connector (JC2) JC3 is for manufacturer only 12

13 HDD BACKPLANE BACK SIDE WITH EXPANDER & HEATSINK STEPS TO INSTALL HDD BACKPLANE: 1. Tear up the thermal paste sticker of heatsink on HDD backplane backside, before installing on metal tray. 2. To install transparent insulator above HDD backplane on metal tray by 12pcs screws. 13

14 3. Slide in metal tray into chassis, then connect all cables before push metal tray to the end. 4. Connect all cables: Fan Fan 2 HDD BP Fan 3 CAUTION: DIP switch default set-up are different for HDD BP 1 and BP 2. HDD BP 2 (1) Display cable 6pin connects to connector JC4 (2) PSU 2pin mute cable connects to JM1, 2pin alarm cable connect to JP1 (3) Chassis front Fan 1 and Fan 2 connect to HDD BP 1, and Fan 3 connects to HDD BP2 Note: Connector JF1, JF2, JF3 are DIP switch adjustable 14

15 Connect power supply 12V ATX 8P cable to HDD BP connector CN1, 2pcs 5V ATX 4P cable to connector CN2, CN3 WARNING: Power connectors are different from CPU 4pin/8pin connector. CB1 CB2 CB3 Mini SAS connector (left to right) CB1_Mini SAS IN CB2_Mini SAS IN/OUT (switchable) CB3_Mini SAS OUT NOTE: CB2, CB3 are DIP Switch adjustable 15

16 HDD BP 1 connects with Fan 1, Fan 2, DIP switch default set-up is No. 2, 3,5 OFF, No. 1, 4, 6, 7, 8 are ON. HDD BP 2 connects with Fan 3, DIP switch default set-up is No.1, 3, 5 OFF, No. 2, 4, 6, 7, 8 are ON. 5. Push metal tray in place then tighten two thumb screws with chassis. 16

17 STEPS TO MAINTAIN HDD BACKPLANE: 1. Power off system 2. Remove all HDDs and holders 3. Release thumb screws and slightly pull out BP 4. Disassemble all cables from BP end connectors 5. Slide out metal tray completely 17