HD Display & Data Transmission Connectivity Products

Transcription

1 HD Display & Data Transmission Connectiity Products ROCS ( Remote Operating & Control System ) IP Fiber Optic Switcher Matrix DVI/HDMI Matrix SDI/HDMI #704, Biz-Center, SK-Technopark, 190-1, Sangdaewon-dong, Jungwon-gu, Seongnam-city Korea TEL FAX

2 What s ROCS (Remote Operating & Control System)? 란? This system controls remote equipment ia ( keyboard, ideo, mouse ) by making the best use of remote transmission technology. Fiber Optic Cable < Equipment s PC > < USER> Goal & application effect of ROCS This system enables user to operate seeral decentralized equipments at one place and at the same time. In other words, one user is able to control seeral equipments at the same time. It reduces an accident deried from production and inspection. As it makes it possible to control PC remotely, it reduces the number of access and moement time. It keeps FAB clean. It reduces subsidiary materials.

3 Ø Block Diagram (IP ) Gbps N/W Switch Gbps N/W Switch PC 1 < Local Site equipment> TX TX RX RX Remote <USER 8> TX PC #48 < Local Site equipment> IP <OER-IT, OER-IR> Equalizing & Re-clocking of ideo signal Simple installation with USB type-design Status of connection of ideo, mouse and keyboard can be checked ia LED 3 UART telecommunication transmission is possible - Knob, Signal Tower, EMO, Switcher control, etc. Local / Remote conersion keypad is supported 1Gbps Ethernet 1 Port On-board H.264 Streaming Decoder Maximum 16 split monitoring screen output ia multiconnections Screen conersion speed below 700ms /Delay 30ms Simple setting-up of user ia OSD GUI

4 Ø Block Diagram (N:1) Fiber Optic < Sub PC3 > < Sub PC2 > Switcher Fiber Optic Cable < Sub PC1 > < Main PC> Local <USER> Remote <USER> Ø Block Diagram (N:N) Fiber Optic PC 1 < Local Site equipment> PC 48 < Local Site equipment> Fiber optic transmission 2km Fiber optic transmission 2km 48x24 Matrix <Seer PC> USER #1 USER #24 UI Touch screen UI Touch screen

5 Fiber Optic <OER-OT, OER-OR> Max. Max. Pixel Clock 225MHz Auto EDID Max. Transmission and Receipt Distance Optical single mode : 2km Optical multi mode : 500m TMDS Re-Clocking, Equalizing PS/2 Initializing No cut-off for Local/Remote conersion Standards : DVI 1.1 Switcher <OSR-41, OSR-81> 1X4, 1X8 Switcher Max. Resolution 1920x1200@60Hz Max. Pixel Clock 165MHz Auto EDID TMDS Equalizing PS/2 Initializing No cut-off for input conersion Reset by keypad button Input switching by front button 2 Port RJ-11 (RS-232) telecommunication 5V power supply for peripheral deices Standards : DVI 1.1 Matrix Series <OMR-44/88G, 4824G> IN & OUT 4X4, 8X8, 48X24 Max. Resolution 1920x1200@60Hz Max. Pixel Clock 225MHz EDID Writing TMDS Re-Clocking, Equalizing PS/2 Initializing No cut-off for input &output conersion Gen-Lock : 1 μs switching time(real Seamless) Screen split : 2/4/6/8 split mode Control System - S/W(UART telecommunication) : Control by UI - H/W : Control by Console Box & Keypad Standards : DVI 1.1

6 DVI/HDMI Matrix 4 x 4, 8 x 8 DVI / HDMI Gen-lock Matrix <OMD-44/88G> IN & OUT 4X4, 8x8 Max Resolution : 1920x1200@60H Max Pixel Clock 225MHz EDID Writing TMDS Re-Clocking, Equalizing Gen-Lock for DVI Built-in Scalor encodes the ideo format in order to proide seamless switching(1 μs ). Diided display : 2, 4, 6, 8 diision Control method Front panel, Ethernet, RS-232 Proides 5V(DC) power on each DVI output Standards : DVI 1.1, HDMI 1.3, HDCP 1.3 Multi Format Matrix IN & OUT 144 x 144 DVI / HDMI / HDBaseT / OPTIC Matrix <OMM-144S> Various Input / Output Choices - DVI, HDMI, HDBaseT(100m), Optical(2km) Automatically I/O Format Conerting TMDS Re-Clocking, Equalizing Gen-Lock for DVI, HDMI, HDBaseT, Optical Built-in Scalor encodes the ideo format in order to proide seamless switching(1 μs ). Multi-iewer : 4 Diision Hot Swap Input Board, Output Board, Power Supply Signal Generator Enable to easy testing from the Matrix Switcher to the display. Supporting Redundant Power Power Supply Monitoring LCD Touch-Screen Security Lock-Out USB Firmware Upgrade Proides 5V(DC) power DVI Slot, HDMI Slot Standards : DVI 1.1, HDMI 1.3, HDCP 1.3

7 3G Full HD-SDI Series 4Ch Link Optical 3G Full HD-SDI 4Ch Link OHD-4SDI-T/R - Mux and Demux up to optical signals - Passie operation - LC / SC connectors (single- mode) - Supported 3G Full SMPTE 424M (HD) Leel - Transmission distance up to 20km - Hot Swappable Rack Mount Modules - 1 Fiber Transmission - Ambient operating temperature: -40 ~75 C OHD-4SDI-T Fiber Optic Cable SM 1 Core OHD-4SDI-R SDI Camera 4Ch SDI Output 4Ch Optical DVI/HDMI Link OED-OW DVI (OED-OW is designed to transmit four TMDS(R,G,B,C) Using the WDM technology up to 2,000meters(6,600feet) oer two LC single mode fiber The EDID in a display can be read and restored by just plugging it to the display. OEH-OW ~ 1200 Resolution - Transmission distance up to 20km(at 1550nm SM) - 7~24Vdc or 110~240Vac free-olt power input - Digital modulation - Ambient operating temperature : -30~65 C - Fiber Optic Connector LC Type

8 Applications ØSmart FA ( Factory Automation ) Lines - Semiconductor Plant - LCD/LED Fab. Factory - Chemical Fab. Plant ( factory monitoring & test ) - Steel Mill Plant ØMedical Imaging Process System - Digital Video Connectiity Solution - Video signal transmission & extension application ØCentral TFT-LCD Monitoring System - Command & control centers for military - Control Center for Industrial CCTV & ITS ØDigital Signage System - Video Wall & Signage - Digital Display for Ad. Distributor #704, Biz-Center, SK-Technopark, 190-1, Sangdaewon-dong, Jungwon-gu, Seongnam-city Korea TEL FAX