Pre-Terminated. FiberExpress

Transcription

1 FiberExpress Pre-Terminated Product Bulletin PB141E LSNH ssemblies The new line of Belden low-smoke, no-halogen (LSNH) pre-terminated fiber assemblies offers faster data center deployment, better performance and easier scalability to next generation transmission speeds for overall lower total cost of ownership. Our End-to-End Expertise Your End-to-End Solution FSTER ESIER BETTER Faster identification of fiber type with Erika Violet for O4 Cable, s and dapters Faster installation with pre-terminated solutions Easier ordering with simple intelligent SmartPart Numbers Easier upgradability to 40G and 100G with PO pre-term solutions Better architectural flexibility with highperformance 0.2 db O4 PO connectors Better quality through exhaustive design validation against TI, ISO and IEC

2 FiberExpress Pre-Terminated LSNH ssemblies Belden offers a full range of FiberExpress Pre-terminated LSNH ssemblies to meet a wide range of data center applications and densities. In addition to faster multi-fiber connections and switch turnups, these fiber assemblies ensure optimum performance with 100% tested factorytermination and lower insertion loss while providing a seamless migration path from 10G to 40G and beyond. FiberExpress ulti-fiber Push-On (PO) Trunk ssemblies enable faster deployment of multi-fiber switch-to-switch fiber backbone connections with architectural flexibility and easier migration from 10G to 40G and 100G. FiberExpress Hydra ssemblies and Patch Cords are uniquely suited to meet a wide range of today s networking and SN switching environments, including PO to LC for distributing multi-fiber connectivity and traditional LC, SC and ST applications. FiberExpress ulti-fiber Cable ssemblies are engineered for maximum performance and superior quality, offering easy configurability with a variety of fiber counts and connector types for instantaneous installation in virtually any multi-fiber application. Today s data centers strive to bring on new services and turn up active equipment as quickly as possible to meet evolving business needs and growing consumer demand for information, increased bandwidth and new applications. t the same time, data centers are striving to lower cost through consolidation and virtualization, which continues to drive the need for higher speeds in both horizontal server-to-switch and backbone switch-to-switch connections throughout the data center. In response, today s data centers are looking to provide a seamless migration path from current 10 gigabit speeds to 40 and even 100 gigabit speeds. Belden FiberExpress Pre-terminated LSNH ssemblies provide faster deployment today and an effective migration strategy for tomorrow, enabling a seamless transition to higher speeds with minimal disruption. With superior insertion loss performance and all the features required for flexible, easy-to-manage fiber connections, FiberExpress Pre-terminated LSNH ssemblies allow the same infrastructure to be used for both current and future needs without wholesale replacement of existing cabling and connectivity components. pplications The new Belden range of FiberExpress Pre-Terminated LSNH ssemblies includes the interfaces, constructions and configurations to accommodate virtually any fiber equipment connection and patching requirement for current and future networking and SN environments in the data center. ulti-fiber, plug-and-play PO trunking connections in cable trays and along conduits between data center cabinets and functional areas. Networking and SN equipment connections at cross connects and interconnects in high-performance, high-density static and dynamic patching environments. High-performance, low-loss fiber architectures with superior flexibility and reconfigurable components to support current 10G applications and future 40G and 100G applications. Rapid deployment, modular data center environments requiring fast, reliable, low-cost installations with maximum efficiency, capacity and uptime. 2

3 Our End-to-End Expertise. Your End-to-End Solution. Benefits Belden FiberExpress Pre-Terminated LSNH ssemblies are factory-terminated and tested for superior built-in performance and reliability, providing faster plug-and-play installation and reduced labor cost with virtually no testing or troubleshooting required. By eliminating the time-consuming and inconsistent process of field termination and testing, FiberExpress Pre-Terminated ssemblies allow fiber connections in the data center to be deployed up to 90% faster and with less risk. FiberExpress Pre-Terminated ssemblies offer the industry s lowest insertion loss performance for O4 cable, connectors and adapters to ensure reliable signal transmission and maximum reach for 10G, 40G, 100G and Fibre Channel SN applications while supporting architectural flexibility for better manageability, scalability and security in a variety of data center environments. To further ensure reliability, FiberExpress Pre-Terminated O4 assemblies are also offered in Erika Violet (Heather Violet) color for faster identification to prevent accidental mixing of different fiber types. With an easy configuring and ordering process and a wide range of options to suit virtually any pre-term data center fiber application, FiberExpress Pre-Terminated LSNH are made to length, reducing excessive slack and keeping projects on schedule. The assemblies come in 100% recyclable packaging, eliminate fiber termination consumables and can be easily reused to prevent unnecessary waste, making them more a more environmentally-friendly option over field-terminated solutions. Belden industry-leading, lowloss PO trunk assemblies, hydra assemblies, patch cords and multi-fiber assemblies are the foundation of Faster, Easier and Better pre-terminated fiber connectivity solutions revolutionizing the data center. To create fully flexible and manageable high-density fiber connectivity systems, Belden FiberExpress Pre-Terminated LSNH ssemblies work seamlessly with FiberExpress Patch Panel Systems, including FX UHD Housings and Shelves and FX UHD and FX Ultra Cassettes, Frames, dapters and ccessories. 3

4 FiberExpress PO Trunk ssemblies rchitectural flexibility and upgradeability to 40 and 100G with low loss 0.2 db O4 PO connectors Superior quality through factory-tested and terminated design validation against industry standards Easier fiber type identification with Erika Violet (Heather Violet) for O4 cable, connectors and adapters Fast and easy installation for rapid deployment with 3-flange real and default pulling eye Simple intelligent SmartPart numbers for easy ordering and configuring F3B2010L, PO() PO(), 24 (2 x 12) fibers, O3 (50µm), Type B, 10 m FX PO Trunk ssemblies Description FX O1 FX O3 FX O4 FX S Cable Performance IL max. 850 nm/1300 nm (db/km) 3.5/ / /1.0 IL max nm/1550 nm (db/km) 0.35/0.25 LSNH Cable Style ini-distribution Performance PO-12 IL max. (db) Polish RL Typ. (db) PC - 30 PC - 30 PC - 30 PC - 60 Fanout 0.5 m, In-Line FX PO Trunk ssemblies Construction Pulling Eye Diameter Description 12 Fiber 24 Fiber 36 Fiber 48 Fiber 72 Fiber 96 Fiber 144 Fiber Installation Diameter - PO-12 (Total s) One Bundle, No Stagger 19.5 mm 25.4 mm 30.0 mm 31.7 mm 38.1 mm 41.9 mm 50.8 mm 1 per Bundle, 8 cm Bundle Stagger 19.5 mm 19.5 mm 19.5 mm 19.5 mm 19.5 mm 19.5 mm 2 s per Bundle, 8 cm Bundle Stagger 25.4 mm 25.4 mm 25.4 mm 25.4 mm 3 s per Bundle, 8 cm Bundle Stagger 30.0 mm 30.0 mm 30.0 mm 4 s per Bundle, 8 cm Bundle Stagger 31.7 mm 31.7 mm 6 s per Bundle, 8 cm Bundle Stagger 38.1 mm 4

5 Our End-to-End Expertise. Your End-to-End Solution. Standard FX PO Trunk ssemblies Building a SmartPart Number Fixed Letter Series 1. Choose F 4 2. Choose s 3. Choose Gender 4. Choose Polarity (outside) 5. Choose Count (per side) 2 6. Choose Choose L 3 O3 4 O4 S OS2 s PO-12 Gender ale to ale E Extension ( to F) Polarity (outside) Type- B Type-B C Type-C Count 1 12 Fiber 005 to 350 (use as decimal) L LSNH Examples F4B2025L: FX PO Trunk, O4, PO-12 (ale to ale), Type-B, 2 PO (24 fibers), 25 m, LSNH, ini-distribution (3.0 mm Sub-Units), Fan-Out: 0.5 m x In-line, Erika Violet jacket FSEBD175L: FX PO Trunk, OS2, PO-12/PC (ale to Female), Type-B, 12 PO (144 fibers), 17.5 m, LSNH, ini-distribution (3.0 mm Sub-Units), Fan-Out: 0.5 m x In-line, Yellow jacket In standard Smart Part Numbers the standard Fan-Out is 0.5 m In-line. O3 = qua, O4 = Erika Violet, OS2 = Yellow as pe TI standards. Tailored FX PO Trunk ssemblies Building a SmartPart Number Fixed Letter Series 1. Choose F 4 2. Choose s 3. Choose Gender 4. Choose Polarity (outside) 5. Choose Count (per side) 4 6. Choose Choose L 8. Choose Cable Construction 9. Choose Fan-Out Geometry Choose Jacket Color Examples 1 O1 3 O3 4 O4 S OS2 s ale to ale Gender ale to male F Female to Female E Extension ( to F) Polarity (outside) Type- B Type-B C Type-C Count 1 12 Fiber 2 24 Fiber 3 36 Fiber 4 48 Fiber 6 72 Fiber 8 96 Fiber D 144 Fiber 001 to 500 (use as decimal) F4B4255PL2: FX PO Trunk, O4, PO-12 (ale to ale), Type-B, 4 PO (48 fibers), 25.5 m, LSNH, ini-distribution (3.0 mm Sub-Units), Fan-Out: 0.5 m x Stag 80 mm/2 conn., aqua connectors and jacket FSFC8200PLEY: FX PO Trunk, OS2, PO-12/PC (Female to Female), Type-C, 8 PO (96 fibers), 200 m, LSNH, ini-distribution (3.0 mm Sub-Units), Fan-Out: 1.0 m x In-line, yellow jacket L LSNH Cable Construction ini- Distribution 3 mm Fan-Out Geometry D 0.5 m x In-line E 1.0 m x In-line F 1.5 m x In-line G 2.0 m x In-line m x Staggered 80 mm/1 conn m x Staggered 80 mm/2 conn m x Staggered 80 mm/3 conn m x Staggered 80 mm/4 conn. 0.5 m x 6 Staggered 80 mm/6 conn. Jacket Color O Orange Y Yellow qua E Erika Violet For even more options FX PO Trunk ssemblies can be Engineered to meet any requirement. Please contact your local Belden representative for more information. 5

6 FX PO-12(f) Patch Cords, ssortment FiberExpress Hydra ssemblies and Patch Cords Fast switch deployment for dense fixed environments with PO to LC fanout hydra assemblies rchitectural flexibility with low loss 0.2 db O4 PO and 0.15 db O4 LC connectors Off-the-shelf and rapid custom options with easy ordering through SmartPart numbers Better flexibility and scalability through multiple connector options, including LC, SC, ST and PO Easier fiber type identification with Erika Violet (Heather Violet) for O4 cable, connectors and adapters FX LC Duplex Patch Cords, ssortment FX Patch Cords Description FX O1 FX O3 FX O4 FX S FX S/PC FX SC Duplex Patch Cords, ssortment FX ST Patch Cords, ssortment Cable Performance LC/SC/ST IL max. 850 nm/1300 nm (db/km) 3.5/ / /1.2 IL max nm/1550 nm (db/km) 0.5/0.5 LSNH Cable Style LC: 2 mm Duplex Zip Cord / SC/ST/Hybrid: 3 mm Duplex Zip Cord Performance LC/SC/ST IL max. (db) Polish RL Typ. (db) PC - 30 PC - 30 PC - 30 UPC - 55 PC - 65 Cable Performance PO IL max. 850 nm/1300 nm (db/km) 3.5/ / /1.0 IL max nm/1550 nm (db/km) 0.35/0.25 LSNH Cable Style PO-12: 3 mm Round Performance PO IL max. (db) Polish RL Typ. (db) PC - 30 PC - 30 PC - 30 PC - 60 (m) O1 Beige O3 qua O4 Erika Violet OS2 Blue OS2/PC Green DHLF2LCPSCP.3, Hybrid LC Duplex to SC Duplex, O3 qua DHLS2SCUSTU.3, Hybrid SC Duplex to ST, OS2 Blue FP3LDF003L, FX Hydra ssembly, O3, 6 LC Duplex, PO-12 (Female), Type- Polarity, 3 m PO-12(f) to PO-12(f) LSNH 2 FP3FF002L FP4FF002L FPSFF002L 3 FP3FF003L FP4FF003L FPSFF003L 5 FP3FF005L FP4FF005L FPSFF005L LC-Duplex to LC Duplex LSNH 2 DFLF2LCPLCP.2 DFLK2LCPLCP.2 DFLS2LCULCU.2 DFLS2LCLC.2 3 DFLF2LCPLCP.3 DFLK2LCPLCP.3 DFLS2LCULCU.3 DFLS2LCLC.3 5 DFLF2LCPLCP.5 DFLK2LCPLCP.5 DFLS2LCULCU.5 DFLS2LCLC.5 SC Duplex to SC Duplex LSNH 2 DFL2SCPSCP.2 DFLF2SCPSCP.2 DFLK2SCPSCP.2 DFLS2SCUSCU.2 DFLS2SCSC.2 3 DFL2SCPSCP.3 DFLF2SCPSCP.3 DFLK2SCPSCP.3 DFLS2SCUSCU.3 DFLS2SCSC.3 5 DFL2SCPSCP.5 DFLF2SCPSCP.5 DFLK2SCPSCP.5 DFLS2SCUSCU.5 DFLS2SCSC.5 ST to ST (Duplex Cord) LSNH 2 DFL2STPSTP.2 DFLF2STPSTP.2 DFLK2STPSTP.2 DFLS2STUSTU.2 3 DFL2STPSTP.3 DFLF2STPSTP.3 DFLK2STPSTP.3 DFLS2STUSTU.3 5 DFL2STPSTP.5 DFLF2STPSTP.5 DFLK2STPSTP.5 DFLS2STUSTU.5 Hybrid: LC Duplex to SC Duplex LSNH 3 DHL2LCPSCP.3 DHLF2LCPSCP.3 DHLK2LCPSCP.3 DHLS2LCUSCU.3 DHLS2LCSC.3 Hybrid: SC Duplex to ST LSNH 3 DHL2SCPSTP.3 DHLF2SCPSTP.3 DHLK2SCPSTP.3 DHLS2SCUSTU.3 6

7 Our End-to-End Expertise. Your End-to-End Solution. FX Hydra ssemblies Description FX O3 FX O4 FX S FX S/PC Cable Performance - LC/SC/ST IL max. 850 nm/1300 nm (db/km) 3.0/ /1.0 IL max nm/1550 nm (db/km) 0.35/0.25 LSNH Cable Style PO: 3.0 mm Round / LC: 2.0 mm Simplex Zip Cord Performance LC IL max. (db) Polish RL Typ. (db) PC - 30 PC - 30 UPC - 55 PC - 65 Fanout 0.5 m, In-Line Performance PO IL max. (db) Polish RL Typ. (db) PC - 30 PC - 30 PC - 60 FX Standard Hydra ssemblies LSNH Description O3 qua O4 Erika Violet OS2 Blue 10G Transceiver Pinout PO-12(f) to 6 x LC Duplex, 1 m In-Line Fanout, 2 m in length FP3LDF002L FP4LDF002L FPSLDF002L PO-12(f) to 6 x LC Duplex, 1 m In-Line Fanout, 3 m in length FP3LDF003L FP4LDF003L FPSLDF003L PO-12(f) to 6 x LC Duplex, 1 m In-Line Fanout, 5 m in length FP3LDF005L FP4LDF005L FPSLDF005L 40G Transceiver Pinout PO-12(f) to 6 x LC Duplex, 1 m In-Line Fanout, 2 m in length FP3LD4F002L FP4LD4F002L FPSLD4F002L PO-12(f) to 6 x LC Duplex, 1 m In-Line Fanout, 3 m in length FP3LD4F003L FP4LD4F003L FPSLD4F003L PO-12(f) to 6 x LC Duplex, 1 m In-Line Fanout, 5 m in length FP3LD4F005L FP4LD4F005L FPSLD4F005L Standard Hydra ssemblies are Type-. Tailored FX Hydra ssemblies Building a SmartPart Number Fixed Letter Series 1. Choose FP 3 2. Choose 1 LD 3. Choose 2 4. Choose Choose L 6. Choose Cable Construction 7 7. Choose Polarity 10. Choose Jacket Color 1 O1 3 O3 4 O4 S OS2 1 LD LC Duplex LC LC Simplex L LC/PC Duplex LB LC/PC Simplex 2 PO-12(m) F PO-12(f) 4 PO-12(m), 40G* 4F PO-12(f), 40G* 002 to 300 (use as decimal) L LSNH Cable Construction 7 Round 3.0 mm Polarity Type- 4 40G Jacket Color O Orange Y Yellow qua E Erika Violet * For use with 40G Transceivers using PO-12 connectors configured as 4 x 10G ports. 7

8 FiberExpress ulti-fiber Cable ssemblies Highly configurable and customizable for a range of applications with simplex, duplex and multi-fiber connector options, including LC, SC, ST and PO Fast and easy installation for rapid deployment with 3-flange real and default pulling eye Easier fiber type identification with Erika Violet (Heather Violet) for O4 cable, connectors and adapters Engineered for maximum performance and quality through exhaustive design validation against industry standards ulti-fiber Cable ssembly Product Engineering Code (PEC) Guideline Use the following options to determine the Product Engineering Code (PEC) and order custom combination of cable type, connectors and length required. 1: NXC identifies the product family for all fiber cable assemblies 2: Select Cable Type C: Cable Construction R: T: N: Fiber Count U = ini-distribution L = LSNH = O1, 62.5 µm ultimode L = 12 Fibers N = O2, 50 µm ultimode X = 24 Fibers Sub-Units F = O3, 50 µm ultimode V = 48 Fibers (ini-distribution cable is a round cable with G = O4, 50 µm ultimode T = 72 Fibers sub-units of 12 Loose tube fibers each. It s used for PO assemblies.) S = OS2, Singlemode = 96 Fibers Z = 144 Fibers 3 and 4: Inside End and Outside End (s) XX: s Y: Polish/Performance Level LC = LC Simplex ST = ST P = PC, Physical Contact ultimode LD = LC Duplex PH = 12 Fiber PO female U = UPC, Ultra Physical Contact Singlemode SC = SC Simplex PG = 12 Fiber PO male = PC, ngled Polish Contact Singlemode SD = SC Duplex ZZ = OPEN* Z = Not applicable* 3 and 4: Inside End and Outside End (s) (Continued) 5: Pulling Eye 900 µm Fan-Out ssembly L: Fan-Out B: Fan-Out Construction G: Fan-Out Geometry E: Pulling Eye C = 0.5 m B = 900 µm Tight Buffer N = In line or none O = t Outside end** F = 1.0 m E = 2.0 mm jacket = Staggered 25 mm N = None G = 2.0 m G = 3.0 mm jacket B = Staggered 50 mm N = None* N = None* 6: (LLLL is the length from tip to tip in meters: 0001, 0005, 0015, 0100, etc.) * Only for Outside end. It s used for pigtails. ** Pulling eye is strongly recommended for assemblies longer than 10 m. Examples PEC Code Description NXC-ULFL-LCPFBN-LCPFBN-O-0015 ultifiber cable assembly, mini-distribution cable, LSNH, O3 (50 µm), 12 fibers, LC/PC-LC/PC, Fan-out: 1 m 900 µm, In-line, with pulling eye, 15 m NXC-ULFV-LDPFEN-PGPFGN-N-0020 ultifiber cable assembly, mini-distribution cable, LSNH, O3 (50 µm), 48 fibers, LC Duplex/PC, Fan-out: 1 m 2.0 mm (LC) & 3.0 mm (PO), In-line, no pulling eye, 20 m Please contact Belden to validate your PEC code and for any other fiber cable assembly combinations not available in this guideline. 8 Belden Technical Support +31 (0) Copyright 2014, Belden Inc. FiberExpress Pre-Terminated ssemblies PB141E ECOS_BDC_0714_E_EE