FPX SERIES FIBER PANELS

Transcription

1 FPX SERIES FIBER PNELS TE Connectivity s (TE) FPX series provides industry-leading fiber cable protection and management in a modular footprint. Now redesigned with a depth of.0 or less and with front only as well as front and rear access, the FPX panel is now suitable for a wide range of applications including central offices, data centers, indoor and outdoor cabinets, huts, CEV s and more. The FPX panel utilizes an internal splicing system that creates a compact, featurerich, high-density solution. FPX achieves densities of 48-fiber terminations/ splices in RU (.75 ) and 88-terminations/splices in 5 RU (8.75 ) using LC connectors (4 and 44 respectively using SC). These densities are attained while utilizing TE s angled adapters to ease cable access, protect bend radius and provide individual fiber access. Field-installable vertical cable guides on either side of the panel allow for managed routing and protection of the fiber entering and exiting the panel. The FPX s wide range of features and options are designed for your networks growing needs. Panels are equipped with adjustable mounting brackets to provide either 9- or 3-inch rack mounting with, 5, and 8 inch recess mounting. The panel is available preterminated with pigtails, IFC cable, or adapters only to simplify ordering and reduce installation time. Features.0 total depth with front only access allows the panel to fit in a wide range of applications including central office, datacenter, outside plant cabinets, and more Front and rear access makes field termination and splicing fast and efficient, regardless of the application or network location. Combines the unique features of vertical cable guides and angleleft/angle-right adapters, offering bend radius protection, intuitive routing and easy connector access dapter packs can be pre-configured at the factory for more efficient service turn-up, or delivered separately for shorter lead times and to defer expenses for when network growth is needed. MPO Cassettes eliminate the need for on-site fiber terminations or splicing, which decreases overall deployment time Equipped with adjustable mounting brackets to provide either 9- or 3-inch rack or cabinet mounting (EI or WECO) as well as, 5, or 8 inch recess mounting vailable in a variety of sizes and configurations and utilizes a single footprint

2 Product Overview Recommended pplications Medium to high-density termination and/or splice panel solution. Suitable for Central Office/Head End/ Data center rack mounts, back-to-back mounting, and use in constrained spaces such as outside plant cabinets, huts, controlled environmental vaults (CEVs), and other customer premise applications. Description FPX Rack Mount Panel. vailable in RU, RU, 3 RU, 4 RU and 5 RU chassis height configurations. Includes adapter only, termination/splice, MPO cassette, and preterminated/stubbed options. Number of fibers, future growth potential Interconnect Cross-connect ccommodates on-frame splicing ccommodates off-frame splicing Rear access Front access Customer premises application to 88; modularity allows for a mix of connection types and to grow capacity with network demand Ideal Suitable for moderate fiber count cross-connect use; for high counts (above 88) consider the NG4access Optical Distribution Frame Yes. Built-in Yes, with the purchase of separate IFC cable. Multifiber clamp included. Yes Yes Ideal 9" mounting Yes 3" mounting Yes Mix equipment with fiber product? Use as dedicated fiber frame VM capabilities Optimum jumper storage location Vertical Cable guide Compliance Ideal Not recommended (See ODF catalog #03743E) No IMP or seperate storage panel required Includes VCG on both sides Meets UL 863 and NEBS (GR-63 and -089) certification requirements PGE

3 DENSITY BY CONNECTOR TYPE ND PPLICTION Size in Rack Units Maximum Density LC connector: SC connector: dapter Pack Configuration: modular adapter packs: angle right/ angle left 4 modular adapter packs: angle right/ angle left 6 modular adapter packs: 3 angle right/ 3 angle left 8 modular adapter packs: 4 angle right/ 4 angle left modular adapter packs: 6 angle right/ 6 angle left Vertical cable guide with panel can be removed Features at a Glance: ngled left/right adapters, highest density with maximum cable management features. SPECIFICTIONS Storage/operating temperature: -40 to 85 C (-40 to 85 F) PNEL CONFIGURTIONS FPX series chassis utilize modular adapter packs which are unique to either the right or left position of the chassis. The left / right position must be specified to ensure proper adapter orientation and color order in the backplane. Below illustrates the various configurations for the five available FPX chassis. RU Chassis 3 RU Chassis 5 RU Chassis RU Chassis 4 RU Chassis PL = angle left adapter pack PR = angle right adapter pack MPL = left MPO cassette MPR = right MPO cassette PGE 3

4 FPX Series Fiber Panels CHSSIS DIMENSIONS RU Model RU Model Total Depth.00 Total Depth Total Width Total Width 3 RU Model 4 RU Model Total Depth.00 Total Depth Total Width Total Width 5 RU Model Total Depth Total Width NOTE: Total width includes removable/reconfigurable features such as cable management and mounting brackets. Total depth includes external features such as doors, latches, and hinges. PGE 4

5 MPO CSSETTE OPTICL SPECIFICTIONS ND POLRITY FPX cassettes are wired straight through as per the recommendations made in TI standard TI-568-C Connectivity Method. Key up mated connector to transceiver Rx Tx B -to-b Patch Cord -to- Patch Cord Key up mated connector to transceiver Rx Tx B Key up to Key up mated connector B Key up to Key up mated connector B Cassette Pinned MPO Connector Cassette Position Position Position Position Key up to Key down mated connector Position Position Key up to Key down mated connector Type- rray Connector Cable Non-Pinned MPO Connector Position Position Figure : Connectivity Method for Duplex Signals Example Optical Path LOW-LOSS MPO CONNECTOR Multimode 40 0 Insertion Loss at 30/550 nm ny Two Randomly Mixed Pairs GR Insertion Loss at 850/300 nm ny Two Randomly Mixed Pairs GR Frequency Frequency TI Insertion Loss (db) Insertion Loss (db) PGE 5

6 4 FIBER LC - MPO CSSETTE WIRING Key Position Position Key Position Position MPO MPO connector endface (reference) MPO B MPO B MPO MPO connector endface (reference) 4 3 Top 4 3 Top row connects to MPO adapter Bottom row connects to MPO adapter B Top row connects to MPO adapter Bottom row connects to MPO adapter B 3 4 Top 3 4 FIBER SC - MPO CSSETTE Cassette ports Key Position Position Key Position Position MPO connector endface (reference) MPO MPO MPO connector endface (reference) Top Top Cassette ports 4 Fiber LC - MPO Cassette Wiring Fiber SC - MPO Cassette Wiring Polarity/Wire Chart Polarity/Wire Chart Cassette Port No. Cassette Port No. MPO Fiber MPO- MPO-B Fiber Pos. Color MPO- MPO Fiber Pos. Fiber Color Port Port 3 Blue Port Blue Port Port 4 Orange Port Orange Port 3 Port 5 3 Green Port 3 3 Green Port 4 Port 6 4 Brown Port 4 4 Brown Port 5 Port 7 5 Slate Port 5 5 Slate Port 6 Port 8 6 White Port 6 6 White Port 7 Port 9 7 Red Port 7 7 Red Port 8 Port 0 8 Black Port 8 8 Black Port 9 Port 9 Yellow Port 9 9 Yellow Port 0 Port 0 Violet Port 0 0 Violet Port Port 3 Rose Port Rose Port Port 4 qua Port qua PGE 6

7 FPX SERIES EMPTY CHSSIS The FPX series chassis can be purchased without adapter packs. In this form, the end-user can mix and match any combinations of modular FPX adapter packs or simply utilize a grow as you go approach to their network. Description Height Part Number Termination only rack or cabinet mount panel, putty white RU empty panel, putty white; accommodates angle LEFT and angle RIGHT adapter packs;.75" FPX-FR RU empty panel, putty white; accommodates angle LEFT and angle RIGHT adapter packs; 3.50" FPX-FR RU empty panel, putty white; accommodates 3 angle LEFT and 3 angle RIGHT adapter packs; 5.5" FPX-3FR RU empty panel, putty white; accommodates 4 angle LEFT and 4 angle RIGHT adapter packs; 6.90" FPX-4FR RU empty panel, putty white: accommodates 6 angle LEFT and 6 angle RIGHT adapter packs; 8.75" FPX-5FR ccessories Single fusion splice tray without protection sleeves Blank plates Mass Fusion and Mechanical Splice tray with protection sleeves Mass Fusion and Mechanical Splice tray without protection sleeves FPX-HST-48 FPX-00P00 FOSC-CC--TRY--SMV60 FOSC-CC--TRY- PGE 7

8 FPX SERIES STNDRD DPTER PCKS The FPX series offers a variety of standard modular adapter packs to accommodate most applications. The modular design is user-friendly and offers maximum flexibility to the end-user. TE s standard adapter pack offerings are SC and LC in both multimode and singlemode options. The same adapter packs are used throughout the FPX platform and oriented in the same direction in each chassis to optimize craft friendliness. The FPX modular adapter packs can only be used with the FPX series panels. Each adapter pack contains labels that make it able to be loaded correctly in only one side of the panel. These craft friendly labels help insure correct installation. The FPX adapter packs are not interchangeable with other TE fiber panels (FL000, FMT, or FL000). DPTER ONLY PCKS Description Multimode adapter only packs Part Number SC adapters, beige color; adapters or fiber ports per adapter pack ngle LEFT adapter only pack ngle RIGHT adapter only pack FPX-F-PL09 FPX-F-PR09 SC adapters, aqua color ; adapters or fiber ports per adapter pack ngle LEFT adapter pack ngle RIGHT adapter pack FPX-F-PL9 FPX-F-PR9 LC adapters, beige color; adapters or 4 fiber ports per adapter pack ngle LEFT adapter pack ngle RIGHT adapter pack FPX-F-4PL06 FPX-F-4PR06 LC adapters, aqua color ; adapters or 4 fiber ports per adapter pack ngle LEFT adapter pack ngle RIGHT adapter pack FPX-F-4PL6 FPX-F-4PR6 adapter only packs SC ultra polish (UPC) adapters, blue color; adapters or fiber ports per adapter pack ngle LEFT adapter pack ngle RIGHT adapter pack FPX-F-PL07 FPX-F-PR07 LC ultra polish (UPC) adapters, blue color; adapters or 4 fiber ports per adapter pack ngle LEFT adapter pack ngle RIGHT adapter pack FPX-F-4PL08 FPX-F-4PR08 SC angle polish (PC) adapters, green color; adapters or fiber ports per adapter pack ngle LEFT adapter pack ngle RIGHT adapter pack FPX-F-PL0J FPX-F-PR0J LC angle polish (PC) adapters, green color; adapters or 4 fiber ports per adapter pack ngle LEFT adapter pack ngle RIGHT adapter pack FPX-F-4PL0Z FPX-F-4PR0Z TE recommends the use of aqua colored adapters with laser-optimized multimode fiber for 0 Gigabit (OM3 and OM4) applications for circuit identification. Each LC adapter accepts fibers each PGE 8

9 DPTER PCKS WITH PIGTILS TE s FPX modular adapter packs are available to be shipped from the factory with preterminated 3 meter pigtails. These configurations can simplify the ordering process and reduce installation time and costs for the end-user. ORDERING INFORMTION Part Number FPX - F - P Number of Fiber Ports per Bulkhead Fibers 4 4 Fibers 00 None Pack Orientation L Left adapter pack R Right adapter pack dapter Style 00 None 07 SC/UPC 0J SC/PC 08 LC/UPC 0Z LC/PC Multimode Pigtail Length leave blank dapters only 3 3 meter pigtails Pigtail Type leave blank R P Fiber Type leave blank S C D Q dapters only ribbon stranded dapters only 50/5 Multimode (OM) 50/5 Multimode (OM3) 50/5 Multimode (OM4) 06 LCMM 09 SCMM 6 LCMM - QU 9 SCMM - QU LC only TE recommends the use of aqua adapters to identify OM3 and OM4 circuits. PGE 9

10 FPX TERMINTION/SPLICE ND DPTER-ONLY FIBER PNELS TE s FPX series fiber panels are available to be shipped with factory installed adapter packs and/or preterminated pigtail assemblies which simplifies the ordering process and reduces installation time and cost. ORDERING INFORMTION Part Number FPX - R - Chassis Size RU RU 3 3 RU 4 4 RU 5 5 RU Splice tray type 0 None or dapter only Bare Fusion Heath Shrink Fusion 3 Mechanical Fusion (also supports ribbon/mass fusion) Chassis Style F depth chassis dapters/pigtails 0 None dapter only P SM Stranded pigtails and adapters R SM Ribbon Stranded pigtails and adapters J OM4 Stranded pigtails and adapters Ports loaded 00 Base Chassis Connector/dapter Color 0 Normal (Green SMPC, Blue SMUPC, Beige MM) qua - (MM OM4) Connector Type 0 None 9 MMSC 6 MMLC 7 SC/UPC J SC/PC 8 LC/UPC Z LC/PC PGE 0

11 FPX PRECONFIGURED TERMINTION PNELS WITH IFC/OSP CBLE To accommodate varying networks requirements and fast installation, the FPX series fiber panels are available preterminated with either intrafacility cable (IFC) or outside plant (OSP) cables. ORDERING INFORMTION Part Number FPX - / Chassis Size RU RU 3 3 RU 4 4 RU 5 5 RU Chassis Style F depth chassis Cable Length Meters (5') 06 6 meters (50') 03 3 meters (75') 03 3 meters (00') meters (5') meters (50') 06 6 meters (00') meters (50') 09 9 meters (300') Fiber Type meters (400') S M Multimode Cable Exit Location Connector Style near/far end 7 SM SC/UPC J SM SC/PC 8 SM LC/UPC Z SM LC/PC E MPO** 6 MMLC (QU) 9 MMSC (QU) M MM MPO** 0 Stub (Far end only)* * Note: The first character can not be a 0 for stub end; it must indicate a connector style option. The second character can be a 0 for stub end or any connector style option for the far end of the cable. ** Note: MPO option is for the far-end connector type only. U D R S Up Cable type Down Multimode Q E Up/Right Down/Right 50/5 μm Laser Optimized to 550 meters (OM4) 50/5 μm Laser Optimized to 300 meters (OM3) Cable Size M F H R T J G IFC Ribbon IFC Stranded IFC Stranded Plenum Indoor/Outdoor Indr/Outdr Ribbon OSP Dielectric Ribbon OSP Dielectric Stranded OSP Single rmor Stranded H 88 (x44) PGE

12 FPX MPO CSSETTES TE s FPX series MPO cassettes utilize the same user interface as the modular adapter packs, but offer the enduser the flexibility of a plug-and-play MPO architecture. Each cassette has a front bulkhead identical to the adapter pack with an internal cable assembly converting to an MPO male connector. This assembly is housed in an enclosed cassette with a rear MPO adapter allowing the user to utilize an MPO trunk to turn up service. ORDERING INFORMTION Part Number FPX - M P Number of Fiber Ports per Cassette Connections dapter Style Multimode 4 4 Connections 6 LCMM aqua Cassette Orientation L Left cassette R Right cassette Fiber Type - Orientation D Multimode Ultra 50/5 (OM3) 9 SCMM aqua 07 SC/UPC 0J SC/PC 08 LC/UPC 0Z LC/PC Q S Multimode Ultra 50/5 (OM4) te.com TE Connectivity, TE connectivity (logo) and Every Connection Counts are trademarks. ll other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity s obligations shall only be as set forth in TE Connectivity s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. 04 TE Connectivity Ltd. family of companies ll Rights Reserved E /4 Revision 04, 0, 0 PRODUCT SHEET Contact us P.O. Box 0 Minneapolis, Minnesota US Tel: x TC: ext telnet.tac@te.com Fax: