NULB-5 Pro90 Series Ultra-Low Profile Linear LED Lightbar Pro90 Source: 8.2W per foot LED

Transcription

1 NULB-5 Pro90 Series Ultra-Low Profile Linear LED Lightbar Pro90 Source: 8.2W per foot LED Dimensions 6", 12", 24", 36", 48" 3/4" Length: 6"= 6-1/16", 12" = 11-3/4", 24" = 23-5/8", 36" = 35-5/8", 48" = 47-5/8" Width: 3/4" Height: 1/2" PRODUCT DESCRIPTION Nora Lighting s low-profile, Title 24 compliant fixtures provide excellent and even illumination on all surfaces. t only 8.2 watts per foot, Lightbar PLUS is one of the most energy efficient products in the market. Combined with an ultra low-profile housing, five fixture lengths, an assortment of interconnector cables and mounting brackets that install at a variety of angles, Nora s Lightbar offers an unprecedented level of contractor friendly installations. LED technology eliminates forward heat from the fixture, also no UV or infrared rays to harm artwork or heat sensitive foods. Features Exceeds California Title 24 high efficacy requirements vailable in 3000K & 4200K CCT vailable in 5 different lengths; 6", 12", 24", 36" & 48" Easy installation with adjustable aiming mounting brackets Flush end connectors Dimmable Lightbars PLUS and Class II Drivers are rated for -20ºC operation 30,000 hours of rated lamp life Included with every Lightbar PLUS: (1) Lightbar PLUS, (2) Flat Mounting Clips [NL-201], (2) ngled Mounting Clips [NL-245], and (1) End to End Connector [NL-200]. Housing Solid aluminum extrusion with flush mounted end caps Finishes Bronze (anodized) and Natural luminum. ELECTRICL Voltage: 24V DC Power Consumption: 8.2 Watts per foot Lumens: 3000K / 4200K, 12"= 3000K / 4200K 3000K / 4200K, 36"= 3000K / 4200K 48"= 3000K / 4200K Color Rendering Index: 82.9 CRIs Light Source: 12 LEDs per foot (Nichia LED) Operating Temperature: -4ºF to 140ºF (-20ºC to 60ºC) Life Expectancy: 30,000 Hours Maximum Run Length: 10' (100W Driver) / 7' (60W Driver) / 3' (30W Driver) Color Temperature: Warm White (3000K), Cool White (4200K) Labels and Warranty culus Listed for Dry Location Title 24 Compliant 2 Year Warranty Ultra-Low Profile Linear LED Lightbar PLUS 1/2" actual size 2008 CTLOG. No. Length Light source Wattage Color Temp. Finish NULB-5 06 = 8" LED 4.1W 30 = 3000K = Natural luminum 12 = 12" 8.2W 42 = 4200K BZ = Bronze 24 = 24" 16.4W 36 = 36" 24.6W 48 = 48" 32.8W Example: NULB-506LED30BZ - 6" LED Lightbar PLUS, 3000K, Bronze Finish Type Project Catalog No. Lamp/Wattage CCESSORIES INTERCONNECTORS NL End to End Connector (one is included with each Lightbar) NL-202-2" Interconnection Cable NL-206-6" Interconnection Cable NL " Interconnection Cable NL " Interconnection Cable NL " Interconnection Cable MOUNTING CLIPS NL Flat Mounting Clip, Chrome - Set of Two (two are included w/ each Lightbar) NL-201BZ - Flat Mounting Clip, Bronze - Set of Two NL-225BZ - Bar to Bar Joiner, Bronze NL-225C - Bar to Bar Joiner, Chrome NL ngled Mounting Clip, Chrome - Set of Two (two are included w/ each Lightbar) NL-245BZ - ngled Mounting Clip, Bronze - Set of Two NL-280BZ - djustable Mounting Clip, Bronze NL-280C - djustable Mounting Clip, Chrome POWER FEED INTERCONNECTORS NL º - 18" Power Line Interconnector NL-207/72-90º - 72" Power Line Interconnector NL " Power Line Interconnector NL-208/72-72" Power Line Interconnector NL " Power Line Interconnector with Switch OTHERS NL Mini Coupler NL Mini Power Feed Splitter NL Motion Sensor, luminum NL-230BZ - Motion Sensor, Bronze NL Mini Touch Dimmer, luminum NL-255BZ - Mini Touch Dimmer, Bronze NL-299/6-6" Diffuser Lens NTL-422W - 1' Wire Raceway (White) NTL-422W - 1' Wire Raceway (White) LED DRIVERS HRDWIRE DRIVERS NTL-530HW - 24V 30W Class II Hardwired Electronic LED Driver NTL-560HW - 24V 60W Class II Hardwired Electronic LED Driver NTL-5100HW - 24V 100W Class II Hardwired Electronic LED Driver NMT-60/24C2HP - 24V 60W Dimmable Class II Remote Hardwire Magnetic LED Driver NMT-96/24C2HP - 24V 96W Dimmable Class II Remote Hardwire Magnetic LED Driver NMT-48/24C2D1-120V/24V 48W Dimmable Class II Remote Hardwire Magnetic Driver w/ Regulator NMT-48/24C2D2-277V/24V 48W Dimmable Class II Remote Hardwire Magnetic Driver w/ Regulator NMT-96/24C2D1-120V/24V 96W Dimmable Class II Remote Hardwire Magnetic Driver w/ Regulator NMT-96/24C2D2-277V/24V 96W Dimmable Class II Remote Hardwire Magnetic Driver w/ Regulator NMT-303/24C2D1-120V/24V 300W Dimmable Class II Remote Hardwire Magnetic Driver w/regulator NMT-303/24C2D2-277V/24V 300W Dimmable Class II Remote Hardwire Magnetic Driver w/regulator PLUG-IN DRIVERS NTL V 24W Direct Plug-In LED Driver NTL V 45W Direct Plug-In LED Driver NTL V 96W Class II Plug-In Electronic LED Driver DRIVER CCESSORIES NL Dimmer (Not for use with NMT Series) NLTL-10 - Replacement 10' Power Line Connector for NMT Series & NTL-5100HW NLTL-30 - Replacement 30' Power Line Connector for NMT Series & NTL-5100HW NTL Low Voltage Splice Box NR-125/6-6" Extension Cord for NTL-530HW & NTL-560HW NR-125/12-12" Extension Cord for NTL-530HW & NTL-560HW NR-125/18-18" Extension Cord for NTL-530HW & NTL-560HW NR-125/72-72" Extension Cord for NTL-530HW & NTL-560HW NR-6035W/6-6' Cord and Plug for NTL-530HW & NTL-560HW NR-6035W/10-10' Cord and Plug for NTL-530HW & NTL-560HW NUSP-JBox - Junction Box required for hardwiring NTL-530HW & NTL-560HW Page 1 of 6

2 LED Lightbar PLUS Interconnectors & Mounting Clips End to End Connector Miniature connector for seamless end-to-end transitions. One is included with every Lightbar PLUS. Bar to Bar Joiner Can be used to provide rigidty when joining two bars together. Has mounting holes. 0.44" 0.26" 0.13" 0.31" 0.79" 2.36" NL-200: End to End Connector Interconnection Cable The interconnection cables allow for linking of any two Lightbar PLUSES in any direction. NL-225BZ: Bar to Bar Joiner, Bronze NL-225C: Bar to Bar Joiner, Chrome ngled Mounting Clip (Set of 2) lign clip into the difference grooves in the extruded body of the Lightbar PLUS. (2) NL- 245 clips are included with every 6", 12" or 24" Lightbar PLUS. 0.5" 0.4" 0.94" 0.69" 0.63" NL-202: 2" Interconnection Cable NL-206: 6" Interconnection Cable NL-218: 18" Interconnection Cable NL-239: 38" Interconnection Cable NL-258: 58" Interconnection Cable Flat Mounting Clip (Set of 2) djustable aiming of 0º, 10º and 23º is available with the Flat Mounting Clip. (2) NL-201 clips are included with every 6", 12" or 24" Lightbar PLUS. NL-245: ngled Mounting Clip, Chrome - Set of 2 NL-245BZ: ngled Mounting Clip, Bronze - Set of 2 djustable Mounting Clip Easy flexible aiming. Extends 1" with bar installed at 90º. 0.31" 1" 0.44" 0.75" 0.65" 1.26" NL-201: Flat Mounting Clip, Chrome - Set of 2 NL-201BZ: Flat Mounting Clip, Bronze - Set of 2 NL-280BZ: djustable Mounting Clip, Bronze NL-280C: djustable Mounting Clip, Chrome Page 2 of 6

3 LED Lightbar PLUS Power Feed Interconnectors and Others 90º Power Line Interconnector llows for easy installation in a limited space application. Connects Lightbar PLUS run directly to driver. 0.38" 0.7" Mini Coupler Extendes interconnection cables and power line interconnectors. 0.4" 0.8" 0.2" Motion Sensor n in-line motion sensor that turns on the power of a run when motion is detected from 4' to 6'. Includes (1) bar to bar joiner, (1) adjustable mounting clip, (1) flat mounting clip, (2) end to end connectors, (1) power line interconnector with switch. Note: The included power line interconnector with switch MUST be used. 2.95" NL-207: 90º - 18" Power Line Interconnector NL-207/72: 90º - 72" Power Line Interconnector Power Line Interconnector To connect Lightbar PLUS run directly to LED Driver. 0.4" 0.94" NL-220: Mini Coupler Mini Power Feed Splitter llows one driver to be split into 4 separate, simultaneous runs. Requires one interconnection cable for each Lightbar PLUS. 0.2" 1.5" NL-230: Motion Sensor, luminum NL-230BZ: Motion Sensor, Bronze Mini Touch Dimmer n in-line mini touch dimmer that has multiple functions of dimming and powering the lightbar run on and off. simple touch on the sensor turns the run on and off, while holding the sensor will dim the light. Includes (1) bar to bar joiner, (1) flat mounting clip, (2) end to end connectors, (1) power line interconnector. Note: The included power line interconnector MUST be used. IN 0.8" 1.97" NL-208: 20" Power Line Interconnector NL-208/72: 72" Power Line Interconnector Power Line Interconnector with Switch llows for individual switching on any Lightbar PLUS run. Connects Lightbar run directly to LED Driver. NL-221: Mini Power Feed Splitter 6" Diffuser Lens Lens softens the LED image and diffuses the light. The lens is available in all Lightbar lengths and simply attached to Lightbars. NL-255: Mini Touch Dimmer, luminum NL-255BZ: Mini Touch Dimmer, Bronze NTL-422W: 2 Wire Raceway (White). Field cuttable plastic (Includes wire channel with double faced tape and cover) NTL-422B: 2 Wire Raceway (Black). Field cuttable plastic (Includes wire channel with double faced tape and cover) 0.75" 1.38" 0.63" 9/16" x 11-1/2" x 1/4" NL-212: Power Line Interconnector with Switch NL-299/6: 6" Diffuser Lens Page 3 of 6

4 LED Lightbar PLUS Drivers 30W 24V Class II Hardwire Electronic LED Driver llows hardwiring Lightbar PLUS run by using NUSP-JBox. Can also be converted into direct plug-in driver by using NR Requires power line interconnection cable unless used with NL-250. Non-Dimmable. 24V Direct Plug-In LED Drivers llows direct connection a wall outlet with 6' cord and plug. Requires power line interconnection cable unless used with NL-250. Non-Dimmable. 1.75" 1.5" 3.75" 24V Class II Dimmable Hardwire LED Driver llows hardwiring Lightbar PLUS run and dimming with Magnetic Low Voltage Dimmer. Includes 10' power line connector (NLTL-10). Requires power line interconnection cable, cannot be used with NL-250. Manual reset thermal circuit - secondary side. Integral regulator for constant current and voltage. Can be mounted 30' from start of run. 1.25" 1.75" 5.63" 4" 11.25" NTL-530HW: 24V 30W Class II Hardwire Driver 60W 24V Class II Hardwire Electronic LED Driver llows hardwiring Lightbar PLUS run by using NUSP-JBox. Can also be converted into direct plug-in driver by using NR Requires power line interconnection cable unless used with NL-250. Non-Dimmable. 2.25" 2.5" 6" NTL-524: 24V 24W Direct Plug-In LED Driver NTL-545: 24V 45W Direct Plug-In LED Driver 96W 24V Direct Plug-In LED Driver llows direct connection a wall outlet with 5' cord and plug and 44" power line connector. Requires power line interconnection cable unless used with NL-250. Non-Dimmable. 5.5" 2.25" 1.25" 3.37" NMT-48/24C2D1: 120V/24V 48W C2 Dimm. Driver NMT-48/24C2D2: 277V/24V 48W C2 Dimm. Driver NMT-96/24C2D1: 120V/24V 96W C2 Dimm. Driver NMT-96/24C2D2: 277V/24V 96W C2 Dimm. Driver 300W 24V Class II Dimmable Hardwire LED Driver Includes three 100W breakers, which allows hardwiring three Lightbar PLUS runs and dimming with Magnetic Low Voltage Dimmer. Includes (3) 10' power line connector (NLTL-10). Requires power line interconnection cable, cannot be used with NL-250. Manual reset thermal circuit - secondary side. Integral regulator for constant current and voltage. Can be mounted 30' from start of run. 4" 4.43" 8.43" 14.25" NTL-560HW: 24V 60W Class II Hardwire Driver 100W 24V Class II Hardwire Electronic LED Driver llows hardwiring Tape Light run. Includes 10' power line connector (NLTL-10). Non-Dimmable. NTL-596: 24V 96W Class II Dimmable Driver 24V Class II Dimmable Hardwire LED Drivers llows hardwiring Lightbar PLUS run and dimming with Magnetic Low Voltage Dimmer. Includes 10' power line connector (NLTL-10). Requires power line interconnection cable, cannot be used with NL-250. Manual reset thermal circuit - secondary side. Can be mounted 30' from start of run. NMT-303/24C2D1: 120V/24V 300W C2 Dimm. Driver NMT-303/24C2D2: 277V/24V 300W C2 Dimm. Driver 3" 11.25" 3.37" 8.5" 3.5" NTL-5100HW: 24V 100W C2 Hardwire Driver NMT-60/24C2HP: 24V 60W Class II Dimmable Driver NMT-96/24C2HP: 24V 96W Class II Dimmable Driver Page 4 of 6

5 LED Lightbar PLUS Drivers ccessories Dimmer Capable of dimming two separate Lightbar PLUS runs simultaneously. 3 Modes: Dimming Mode, uto-fading Mode, and Flashing Mode. Includes: (1) Dimmer, (2) 6" Interconnection Cables [NL- 206], (2) End to End Connectors [NL-201], and 6 mounting screws. Not compatible with NMT Series Extension Cord for NTL-530HW or NTL-560HW Used to extend length between NUSP-JBox and NTL-530HW or NTL-560HW. Can be joined together to create custom lengths. 3.5" 2" NL-250: Dimmer 1.38" Replacement Power Line Connector For use with NMT Series and NTL-5100HW. Replaces included 10' lead wire, to allow for 30' or less length between Lightbar PLUS run and LED Driver. NR-125/6: 6" Flexible Extension Cord NR-125/12: 12" Flexible Extension Cord NR-125/18: 18" Flexible Extension Cord NR-125/72: 72" Flexible Extension Cord Cord and Plug for NTL-530HW or NTL-560HW Used to convert NTL-530HW or NTL-560HW into a direct plug-in driver. NLTL-10: 10' 24V Power Line Connector NLTL-30: 30' 24V Power Line Connector NR-6035W/6: 6' Cord and Plug NR-6035W/10: 10' Cord and Plug Low Voltage Splice Box Use to join Romex low voltage lead to power line connector. Junction Box for Hardwiring Required for hardwiring NTL-530HW or NTL-560HW. Can be used to feed to separate runs. ccepts Romex. 0.8" 2.3" 0.45" 2.75" 4.25" 1.54" NTL-415: Low Voltage Splice Box NUSP-JBox: Junction Box for Hardwiring Page 5 of 6

6 Sample Layouts B C D. NULB-512LED 12" LED Lightbar PLUS B. NL-200 End-to-end Connector (included with each Lightbar) C. NL º Power Line Interconnector D. NTL-530HW 30W Class II LED Driver E. NULB-506LED 6" LED Lightbar PLUS G F. NL-202 NL-258 2" Interconnection Cable 58" Interconnection Cable G. NR-6035W/6 6' Power Cord F B C E B F E D G Page 6 of 6

7 ILLUMINTING THE FUTURE...SINCE 1989 NTL HWD10 Hardwire Electronic Driver Type Project Catalog No. Lamp/Wattage 24 Volt, 96 Watt Class II (0-10V Dimming) PRODUCT DESCRIPTION 24 Volt enclosed driver to be used with Nora Lighting's 24 Volt systems requiring a Class II driver (0-10V Dimming). Features 120/277V 0-10V Dimmable Type 3R Rainproof Enclosure Conduit ccess Wiring Compartment Meets Class II output limits 24 Volt DC Rated output Includes NLTL-10, 24V 10' Power Line Connector culus Listed Enclosure & culus Recognized Driver ELECTRICL Input: 120/277V Output: 24VDC Wattage: 96W 11.25" 3.37" OPTIONL CCESSORIES NLTL-10: 24V 10' Power Line Connector (included) NLTL-30: 24V 30' Power Line Connector Labels and Listings culus Listed Enclosure Type 3R Rainproof Enclosure culus Recognized Driver Width: 3.37" Length: 11.25" Height: 24V 96W Class II Hardwire Electronic Driver 0-10V Dimming NTL HWD10: 24V 96W Class II Hardwire Electronic Driver 0-10V Dimming Optional ccessories NLTL-10: 24V 10' Power Line Connector (included with each driver) NLTL-30: 24V 30' Power Line Connector Page 1 of 1 Phone: FX: nora@noralighting.com Specifications subject to change without notice. 2016