An Introduction to PICMG 3.7 ATCA Base Extensions PENTAIR
|
|
|
- Myron Elmer Holland
- 6 years ago
- Views:
Transcription
1 An Introduction to PICMG 3.7 ATCA Base Extensions
2 PICMG SPECIFICATION HIERARCHY PICMG 3.0 ATCA PICMG 3.1 Ethernet PICMG 3.4 PCIe PICMG 3.5 SRIO PICMG 3.7 ATCA Extensions PICMG 3.8 RTM
3 PICMG 3.0 ADVANCEDTCA PICMG 3.0 AdvancedTCA
4 PICMG 3.0 THE ORIGINAL ATCA IMPLEMENTATION Introduced in 2002 by the PCI Industrial Computer Manufacturers Group Initially targeted to the Telco Industry, so -48VDC powered System Availability target of % (~6 minutes/year of down time) Physical Infrastructure Management and Environmental Monitoring 200W/slot in a Telco environment Hot-Swap of FRUs and blades supported RTMs to simplify cable routing and repair
5 PICMG 3.0 THE ORIGINAL ATCA IMPLEMENTATION 10/100/1000 MB Ethernet Base Interface for out of band management A protocol agnostic Fabric interconnect for moving data Dual-Star, Dual-Dual-Star, Full-Mesh, and Replicated Mesh Fabric architectures A Fabric data rate up to 40Gb/s (4 x 10Gb/s) was planned
6 PICMG 3.0 THE ORIGINAL ATCA IMPLEMENTATION The Blades are typically XEON based, but DSPs and Packet Processors are available Storage blades available Many version of switch blades Interoperability Workshops insure that everything works together
7 PICMG 3.0R1, R2, AND R3 ATCA UPDATES The ATCA specification is continually updated to meet market requirements 200W -> 400W per blade Advanced Differential Fabric connector added to support faster Fabrics 40G Ethernet added in PICMG 3.1R proposed CRs reviewed, mostly clarifications Current shelves support 450W+ cooling
8 PICMG 3.1 ETHERNET & FIBRE CHANNEL PICMG 3.1 Ethernet/Fibre Channel Over PICMG 3.0
9 PICMG 3.1 ETHERNET FABRIC 1G (1000Base-KX) Fabric for the first products, 240Gb/s (Full-Mesh) 10G (10GBASE-BX4) Fabric was demonstrated in 2004, 2.4Tb/s (Full-Mesh) In 2012, PICMG 3.1R2.0 added 40G (40GBASE-KR4) Fabric based on IEEE 802.3ba. It was demonstrated in ATCA systems the same year, 9.6Tb/s (Full-Mesh) The IEEE 802.3bj standard was recently completed and includes 100GBASE-KP4 and 100GBASE-KR4 for backplane use. The SERDES manufacturers are only showing interest in 100GBASE-KR4 which will make the backplane a challenge to design. PICMG 3.1R3.0 could add: 100G (100GBASE-KR4) Fabric, 24.0Tb/s (Full-Mesh)
10 PICMG 3.1 ETHERNET FABRIC 100GBASE-KP4 100GBASE-KR4 KP4 signals run about ½ the frequency of KR4 signals for the same data rate Images courtesy of Globaltek
11 PICMG 3.7 ADVANCEDTCA BASE EXTENSIONS PICMG 3.7 AdvancedTCA Base Extensions
12 PICMG 3.7 ADVANCEDTCA BASE EXTENSIONS Backward compatible with existing ATCA boards Up to 32 slots, 16 in the front (Side A) and 16 in the back (Side B) New Extended Boards and Extended Transition Modules (ETM) Power increased to 600W for a single-slot blade, 800W for wider blades Support for -60VDC input not required Enhanced Hardware Platform Management Double Wide boards explicitly supported Relaxed temperature profiles for use in a Data Center 10GBASE-T supported on the Base Interface
13 PICMG 3.7 ADVANCEDTCA BASE EXTENSIONS Up to 32 slots, 16 in the front (Side A) and 16 in the back (Side B) Can have a single serpentine backplane, or two back-to-back backplanes The single serpentine backplane does not support ETMs Boards can be installed in Side A or Side B
14 PICMG 3.7 ADVANCEDTCA BASE EXTENSIONS Extended Boards (EB) and Extended Transition Modules (ETM) EBs connect to the Base Interface and Fabric on the backplane EBs can get additional power from the backplane Both EBs and ETMs connect to the Front Board through the Zone 3 connectors Both EBs and ETMs double the available component space Both can be installed in Side A or Side B ETMs are just big RTMs
15 PICMG 3.7 ADVANCEDTCA BASE EXTENSIONS Much higher power dissipation for blades and EBs The power connector rating was increased from 16A to 25A with a more realistic test that includes cooling through the PCBs Slot power limit increased from 400W to 800W 400W+ Boards require electronic fuses
16 PICMG 3.7 ADVANCEDTCA BASE EXTENSIONS Support for -60VDC input not required Legacy, Carrier Grade, and Enterprise Grade voltage ranges defined Legacy includes support for 40 to 72 VDC input, including the nominal -60V Carrier Grade supports only 40 to 57 VDC input, including the nominal -48V Enterprise Grade supports only 44 to 57 VDC input Dropping support for -60V makes the shelf and blades SELV and can reduce cost. Enterprise Grade blades can use lower Cost DC-DC converters that have a smaller input voltage range
17 PICMG 3.7 ADVANCEDTCA BASE EXTENSIONS Hardware Platform Management Enhanced Support for Extended Boards and ETMs Support for up to 32 Boards More detail on Power Entry Module feeds Can determine which AC Power Supply feeds a FRU A board can say what input voltage it supports A shelf can say what voltage it will provide Boards can report Power and Energy usage High accuracy sensors, more than 8-bit raw values
18 PICMG 3.7 ADVANCEDTCA BASE EXTENSIONS Double Wide Boards explicitly supported Double Wide Boards were allowed in PICMG 3.0 ATCA, but not well described PICMG 3.7 has a thorough description of Double Wide Boards Double Wide Centered Board PCB in the center, DIMMS on the left, CPUs on the right Double Wide Left Aligned Board PCB on the left, everything on the right Boards can be more than Double Wide
19 PICMG 3.7 ADVANCEDTCA BASE EXTENSIONS Relaxed temperature profiles for use in a Data Center The original ATCA specification was targeted towards TELCO customers with a 55C maximum ambient temperature A Data Center climatic class was added with a 45C maximum ambient temperature The Data Center climatic class allows approximately 1.5 times higher Board power to be used as compared with a design for the Central Office climatic class. A shelf that can cool 400W boards in a Central Office should be able to cool 600W boards in a Data Center The cooling performance classes introduced by CP-TA are included and extended to higher levels
20 PICMG 3.7 ADVANCEDTCA BASE EXTENSIONS 10GBASE-T supported on the Base Interface Increases the speed of the Base Interface from 1G to 10G Running the Base Interface at 10G instead of 1G Reduces management message latency Allows for faster firmware upgrades
21
MTCA.4 TUTORIAL BASICS INTRODUCTION IN XTCA
MTCA.4 TUTORIAL BASICS INTRODUCTION IN XTCA TWEPP 2016 SEPTEMBER 26, 2016 KIT, KARLSRUHE Rüdiger Cölln Pentair Technical Solutions GmbH ruediger.coelln@pentair.com AGENDA What is xtca? Specifications Overview
Promentum MPCBL0050 PRODUCT BENEFITS. Dual-Core Intel Xeon Processor LV Dual Core Xeon processor module FEATURE SUMMARY. [Print This Datasheet]
![Promentum MPCBL0050 PRODUCT BENEFITS. Dual-Core Intel Xeon Processor LV Dual Core Xeon processor module FEATURE SUMMARY. [Print This Datasheet]](/thumbs/95/125573149.jpg "Promentum MPCBL0050 PRODUCT BENEFITS. Dual-Core Intel Xeon Processor LV Dual Core Xeon processor module FEATURE SUMMARY. [Print This Datasheet]")
[Print This Datasheet] Promentum MPCBL0050 Dual Core Xeon processor module FEATURE SUMMARY High performance AdvancedTCA blade based on the Dual-Core Intel Xeon LV5138 processor that provides 4 processor
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
Your Solution Partner
Your Solution Partner 1 Short Presentation Elma & Elincom Elma Electronic is a global manufacturer of products for housing electronic systems. The company provides everything from components such as modular
for Special Applications
Lower Cost MicroTCA for Special Applications MICROTCA IS AN EXTREMELY VERSATILE TECHNOLOGY WITH MANY APPLICATIONS DRIVING MANY DIFFERENT REQUIREMENTS. SYSTEM DESIGNERS CAN REDUCE COSTS BY CONSIDERING WHAT
An Integrator s Guide to MicroTCA Part II How a FRU starts up
An Integrator s Guide to MicroTCA Part II How a FRU starts up By Thomas Kastner, Advantech In the previous article of this series we covered the basic system management aspects and architecture of MicroTCA.
Product Catalog Embedded Computing Products
www.sanblaze.com 2016 Product Catalog Embedded Computing Products Te c hno l o g y, I n c. Custom and OEM Services SANBlaze OEM Services provide the right solution to meet and exceed the needs of our OEM
Pixus Technologies Catalog
The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com US: 916.524.8242 CAN: 519.885.5775 Order Information
3U ATCA Hybrid Chassis with 8 AMCs (Mid-size) VT835
3U ATCA Hybrid Chassis (Representative model only exact configuration will change) KEY FEATURES 19 rack mount 3U ATCA Hybrid AMC Chassis Holds 1 ATCA slot and 8 mid-size AMC slots 40G or 10G fabric across
COMPUTING ATCA-7368-CE. AdvancedTCA Processor Blade
COMPUTING Data Sheet The ATCA-7368-CE processor blade is an ideal solution for data processing applications requiring powerful processing performance, flexible I/O functionality plus mass srage and network
COMPUTING AXP G AdvancedTCA Shelf. This six-slot, 40G ATCA shelf is ideal for both traditional telecom and enterprise environments.
COMPUTING Data Sheet This six-slot, 40G ATCA shelf is ideal for both traditional telecom and enterprise environments 6-slot, 7U, 19 form factor AC & DC power input options All redundant field replaceable
ATCA Platform Considerations for Backplane Ethernet. Aniruddha Kundu Michael Altmann Intel Corporation May 2004
ATCA Platform Considerations for Backplane Ethernet Aniruddha Kundu Michael Altmann Intel Corporation May 2004 IEEE 802.3ap Back Plane Ethernet TF Interim meeting May 2004 1 Introduction This presentation
Vol. S Cost Effective Customization Capabilities Wide Breadth of Products.
Vol. S4-3-4 Cost Effective Customization Capabilities Wide Breadth of Products All products and company names listed are trademarks or trade names of their respective companies. All specifications are
The Advantages of AdvancedTCA * The Telecom Industry s Open Standard for Equipment Manufacturers
The Advantages of AdvancedTCA * The Telecom Industry s Open Standard for Equipment Manufacturers Intel in Communications The Advantages of AdvancedTCA* Contents Executive Summary 2 Trends Driving AdvancedTCA*
Low cost 1U µtca Chassis with 2 AMC slots and integrated option for Dual 2.5 SATA/SAS Disk
VT855 TM THE POWER OF VISION KEY FEATURES Two mid-height slots or two double width mid-height in 1U Chassis Management can run as Shelf/MCMC (MicroTCA Carrier Management Controller) or MCMC.1,.2,.3,.4
VT857 1U µtca Chassis, 12 AMC, 10 GbE
1U µtca Chassis, 12 s KEY FEATURES Twelve mid-size single module slots or six midsize double module slots Cascade any number of 1U Carriers for expansion and management Management can run as Shelf/MCMC
COMPUTING. Centellis Virtualization Platform An open hardware and software platform for implementing virtualized applications
COMPUTING Data Sheet Centellis VP provides the hardware and software platform to deploy carrier grade virtualized applications. Application virtualization software framework based on industry standard
White Paper. About MicroTCA.4: An High-Performance Architecture with I/O and Signal Conditioning Provisions
White Paper About MicroTCA.4: An High-Performance Architecture with I/O and Signal Conditioning Provisions MicroTCA is a powerful, compact open-standard COTS architecture used in Military, Aerospace, Communications/
1U µtca Chassis, 10 AMCs, 10GbE, 1100W VT848
1U µtca Chassis, 10 s, 10GbE, 1100W VT848 1U µtca Chassis, 10 s KEY FEATURES 1U chassis platform Ten mid-size slots Integrated MCH.2 and.3 compliant 10GbE/1GbE Fabric 10GbE on ports 4-7 and 8-11 GbE on
VT816 1U µtca.4 Chassis with 2 AMC Slots, PCIe Gen 3
1U µtca.4 Chassis, 2 AMCs KEY FEATURES MicroTCA.4 low-profile chassis platform, 19 x 1U x 14.2 deep Integrated Intel Xeon E3-1125 v2 processor @2.5 GHz Compliant to µtca.4 specifications with rear IO Supports
COMPUTING. Centellis 4410 AdvancedTCA 10GbE Platform Core. Centellis 4410 is Artesyn s most cost-effective ATCA based platform core.
COMPUTING Data Sheet Centellis 4410 is Artesyn s most cost-effective ATCA based platform core High performance 10GbE ATCA shelf 14-slot, 13U, 19 form factor Best-in-class thermal and power characteristics
Management building blocks speed AdvancedTCA product development
TELECOM S P E C I A L F E A T U R E Management building blocks speed AdvancedTCA product development By Mark Overgaard The IPM Sentry Intelligent Platform Management products provide off-the-shelf building
COMPUTING ATCA AdvancedTCA Processor Blade
COMPUTING Data Sheet The ATCA-7365 processor blade is an ideal solution for communications equipment requiring powerful server class processing performance, flexible mass storage and network options High
ATCA-7350 AdvancedTCA Processor Blade
ATCA-7350 AdvancedTCA Processor Blade PRELIMINARY DATA SHEET The ATCA-7350 is an Intel based blade that is ideal for 32-bit or 64-bit applications requiring powerful multicore processing performance and/
COMPUTING ATCA G ATCA Server Blade
COMPUTING Data Sheet The ATCA-7367 processor blade is an ideal solution for communications equipment requiring powerful processing performance, flexible I/O functionality plus mass storage and network
COMPUTING ATCA G ATCA Server Blade
COMPUTING Data Sheet The ATCA-7368 processor blade is an ideal solution for communications equipment requiring powerful processing performance, flexible I/O functionality plus mass srage and network options
Extending PCI-Express in MicroTCA Platforms. Whitepaper. Joey Maitra of Magma & Tony Romero of Performance Technologies
Extending PCI-Express in MicroTCA Platforms Whitepaper Joey Maitra of Magma & Tony Romero of Performance Technologies Introduction: The introduction of MicroTCA platforms has opened the door for AdvancedMC
AXIe-1: Base Architecture Specification. Revision 2.0
AXIe-1: Base Architecture Specification Revision 2.0 September 5. 2013 Important Information AXIe-1 Base Architecture Specification is authored by the AXIe Consortium companies. For a vendor membership
StoreEngine TM OpenVPX
StoreEngine TM OpenVPX SE300 VPX Data Sheet: 3U VPX Solid State Storage Blade Recorder/File Server/Embedded RAID StoreEngine 3U VPX and 3U CCVPX StoreEngine is a scalable storage manager blade designed
AXIe-1: Base Architecture Specification. Revision 3.1
AXIe-1: Base Architecture Specification Revision 3.1 January 11, 2018 Important Information AXIe-1 Base Architecture Specification is authored by the AXIe Consortium companies. For a vendor membership
An Oracle White Paper February Enabling End-to-End 10 Gigabit Ethernet in Oracle s Sun Netra ATCA Product Family
An Oracle White Paper February 2011 Enabling End-to-End 10 Gigabit Ethernet in Oracle s Sun Netra ATCA Product Family Executive Overview... 1! Introduction... 1! An Ecosystem Delivering Bandwidth and Flexibility...
ATCA-7301 AdvancedTCA Processor Blade
ATCA-7301 AdvancedTCA Processor Blade The ATCA-7301 is a high performance ATCA processor blade for data and control plane applications n 2.16 GHz Intel Core 2 Duo 64-bit processor n On-board Gigabit Ethernet
ATCA-7365-CE AdvancedTCA Processor Blade
ATCA-7365-CE AdvancedTCA Processor Blade The ATCA-7365-CE processor blade is an ideal solution for data processing applications requiring powerful server class processing performance, flexible mass storage
1 VT814 2U µtca.4 Chassis with 6 AMC Slots
VT814 U µtca.4 Chassis with 6 Slots Key Features MicroTCA rack mount or deskp chassis platform, 19 x U x 14. deep VT814 Compliant µtca.4 specifications with rear IO for High-Energy Physics and other applications
MicroTCA for Medical Applications
1 / 7 MicroTCA for Medical Applications By Claudia Bestler, Dr. Stephan Rupp, Kontron W ithin the shortest period of time, a huge choice of Advanced Mezzanine Cards has become available on the market.
AMC540. Key Features. Benefits. Xilinx Virtex-7 FPGA AMC with Dual TI DSP AMC540. Xilinx Virtex-7 XC7VX690T FPGA
59 AMC540 Key Features Xilinx Virtex-7 FPGA AMC with Dual TI DSP Xilinx Virtex-7 XC7VX690T FPGA DDR-3 Memory (3 banks of 64-bit, 6 GB Total) Dual DSP (optionally TMS320C6670 or TMS320C6678) 8 GB of DDR-3
Lowering Cost per Bit With 40G ATCA
White Paper Lowering Cost per Bit With 40G ATCA Prepared by Simon Stanley Analyst at Large, Heavy Reading www.heavyreading.com sponsored by www.radisys.com June 2012 Executive Summary Expanding network
5U µtca Chassis, 12 AMC, 40GbE VT866
5U µtca Chassis, 12 AMCs KEY FEATURES μtca System Platform 19 x 5U x 10.5 deep (with handles 12 deep) Full redundancy with dual MicroTCA Carrier Hub (MCH), dual Cooling Units and dual Power Modules Up
Server-Grade Performance Computer-on-Modules:
June, 2018 Version 0.x Server-Grade Performance Computer-on-Modules: COM Express Based on Intel Xeon Solution June, 2018 Version 0.x Table of Contents Introduction: Market Overview and Challenges... 1
AMC517 Kintex-7 FPGA Carrier for FMC, AMC
AMC Kintex-7 FPGA Carrier KEY FEATURES AMC FPGA carrier for FMC per VITA-57 Xilinx Kintex-7 410T FPGA in FFG-900 package with optional P2040 Supported by DAQ Series data acquisition software AMC Ports
Components of a MicroTCA System
Micro TCA Overview0 Platform, chassis, backplane, and shelf manager specification, being developed through PICMG Allows AMC modules to plug directly into a backplane Fills the performance/cost gap between
Oracle s Netra Modular System. A Product Concept Introduction
Oracle s Netra Modular System A Product Concept Introduction Table of Contents Table of Contents 1 Introduction 2 Blades Versus Rackmount Servers 3 Traditional Server Architectures Merged 3 Plug-and-Play
OPTIONS FOR NEXT GENERATION DIGITAL ACQUISITION SYSTEMS
OPTIONS FOR NEXT GENERATION DIGITAL ACQUISITION SYSTEMS A. Boccardi, CERN, Geneva, Switzerland Abstract Digital acquisition system designers have an always increasing number of options in terms of bus
Kontron Completes Triple 10-Gigabit ATCA Portfolio for Triple Play IPTV-Based Broadband Network Solutions
Triple Play IPTV-Based Broadband Network Solutions Using Intel Architecture Kontron Introduces 10-Gigabit Ethernet Fabric Connectivity at the Node, Hub and Carrier Board Level for Powerful Integrated Solutions
2 Slot AdvancedTCA Chassis User Manual
2 Slot AdvancedTCA Chassis User Manual TABLE of CONTENTS DESCRIPTION PAGE TITLE PAGE 1 TABLE of CONTENTS 2 1.0 General Information 5 1.1 Introduction 5 1.2 References 5 1.3 Company Overview 5 1.4 Features
2U µtca Chassis with 12 AMC slots VT881
VT TM THE POWER OF VISION KEY FEATURES µtca System Platform x U x deep Full redundancy with dual MicroTCA Carrier Hub (MCH), dual Cooling Units and dual Power Modules Up to twelve s: four full-size and
AMC516 Virtex-7 FPGA Carrier for FMC, AMC
KEY FEATURES Virtex-7 FPGA Carrier AMC FPGA carrier for FMC per VITA-57 Xilinx Virtex-7 690T FPGA in FFG-1761 package with optional P2040 Supported by DAQ Series data acquisition software AMC Ports 12-15
COMPUTING ATCA-7480-D. Ruggedized 40G Server Blade
COMPUTING Data Sheet An ideal solution for defense systems requiring powerful data processing performance, flexible mass storage and network options Two Intel Xeon processors, E5-2600 v3 family Scalable
UTC040C MicroTCA Carrier Hub (MCH) Conduction Cooled, PCIe Gen3
KEY FEATURES µtca.3 MCH, PCIe Gen 3 Double module, mid-size per AMC.0 Conduction cooled for rugged applications Unified 1GHz quad-core CPU for MCMC (MicroTCA Carrier Management Controller), Shelf Manager,
ATCA-7360 AdvancedTCA Processor Blade
ATCA-7360 AdvancedTCA Processor Blade The ATCA-7360 processor blade is an ideal solution for communications equipment requiring powerful server class processing performance, flexible mass storage and network
AMC759. Key Features. Benefits. Intel Xeon E3 Processor AMC, SRIO Gen2 AMC759. Processor AMC Intel Xeon Processor E3-1505M v6 (Kaby Lake)
Key Features Intel Xeon E3 Processor AMC, SRIO Gen2 Processor AMC Intel Xeon Processor E3-1505M v6 (Kaby Lake) SRIO Gen2 on ports 4-7 and 8-11 (AMC.4) Serial Over LAN (SOL) 16 GB of DDR4 memory with ECC
Cisco UCS C24 M3 Server
Data Sheet Cisco UCS C24 M3 Rack Server Product Overview The form-factor-agnostic Cisco Unified Computing System (Cisco UCS ) combines Cisco UCS C-Series Rack Servers and B-Series Blade Servers with networking
Keysight Technologies M9514A and M9521A AXIe 14-Slot Chassis and AXIe System Module
Keysight Technologies M9514A and M9521A AXIe 14-Slot Chassis and AXIe System Module Data Sheet Introduction Product description The M9514A AXIe chassis and M9521A AXIe System Module (ASM) are fully compatible
SSD Architecture Considerations for a Spectrum of Enterprise Applications. Alan Fitzgerald, VP and CTO SMART Modular Technologies
SSD Architecture Considerations for a Spectrum of Enterprise Applications Alan Fitzgerald, VP and CTO SMART Modular Technologies Introduction Today s SSD delivers form-fit-function compatible solid-state
Cisco UCS B200 M3 Blade Server
Data Sheet Cisco UCS B200 M3 Blade Server Product Overview The Cisco Unified Computing System (Cisco UCS ) combines Cisco UCS B-Series Blade Servers and C- Series Rack Servers with networking and storage
Agilent E2943A/E2944A ATCA Probes for Advanced Switching Interconnect
Agilent E2943A/E2944A ATCA Probes for Advanced Switching Interconnect Hardware Setup Guide Agilent Technologies Notices Agilent Technologies, Inc. 2005 No part of this manual may be reproduced in any form
VT992 1U External Power Supply for MTCA Systems, Quad 1200 W
KEY FEATURES 1U External Power Up to four hot-swappable Power Units per PSU Four 48V DC Output via front panel MicroTCA 1U 19 rack mount chassis platform RoHS compliant Benefits of Choosing VadaTech 1U
-Page 1 of 21 -
ATCA Tester Version 3.3.0 Release Notes -Page 1 of 21 - Introduction The ATCA Tester is an automated test suite for testing the platform management software in different types of ATCA building blocks,
-Page 1 of 7 -
ATCA Tester Version 3.0.0 Release Notes -Page 1 of 7 - Introduction The ATCA Tester is an automated test suite for testing the platform management software in different types of ATCA building blocks, such
Ensemble 6000 Series OpenVPX HCD6210 Dual QorIQ T4240 Processing Module
Ensemble 6000 Series OpenVPX HCD6210 Dual QorIQ T4240 Processing Module Next-Generation High Density Processing With I/O in a Single VPX slot OpenVPX The Ensemble 6000 Series OpenVPX HCD6210 High Compute
1U Chassis with 6 AMCs, Quad SPF+, Redundant Power VT840
1U Chassis, Redundant Power KEY FEATURES Six mid-height AMC slots per 1U carrier or two doublewidth, mid-height plus two mid-height AMC slots Management can run as Shelf Manager or MCMC (MicroTCA Management
Cisco TelePresence MSE 8000
Data Sheet Cisco TelePresence MSE 8000 Figure 1. Cisco TelePresence MSE 8000 Product Overview The Cisco TelePresence MSE 8000 (MSE 8000) is a high-capacity voice and video conferencing media services engine.
Channels for Consideration by the Signaling Ad Hoc
Channels for Consideration by the Signaling Ad Hoc John D Ambrosia Tyco Electronics Adam Healey, Agere Systems IEEE P802.3ap Signaling Ad Hoc September 17, 2004 Two-Connector Topology N2 H B September,
atca-6100 Quad-Core Intel Xeon L GHz 5.86 GT/s (Intel QPI) Intel 5520 ICH10R Four DDR pin 48 GB REG/ECC ATI ES1000
Selection Guide Processor Blades NEW Products Model Name CPU and Core Logic CPU Support CPU Speed CPU FSB Chipset atca-600 Quad-Core Intel Xeon L558 2. GHz 5.86 GT/s (Intel QPI) Intel 5520 ICH0R Quad-Core
Pigeon Point BMR-A2F-AMCc Reference Design Board Management Reference Design Add-on for Carrier IPMCs
PRODUCT BRIEF Pigeon Point BMR-A2F-AMCc Reference Design Board Management Reference Design Add-on for Carrier IPMCs Within AdvancedMC Carrier and Custom Derivative Architectures May 2, 2016 Electronics
SmartFan Fusion-4. Speed Control and Alarm for DC Fans CONTROL RESOURCES INCORPORATED. The driving force of motor control & electronics cooling.
SmartFan Fusion-4 Speed Control and Alarm for DC Fans The driving force of motor control & electronics cooling. P/N FUS300-F DC Controls SmartFan Fusion-4 is a digital fan speed control and alarm that
Cisco UCS C240 M3 NEBS High-Density Rack Server (Small Form Factor Disk Drive Model)
Spec Sheet Cisco UCS C240 M3 NEBS High-Density Rack Server (Small Form Factor Disk Drive Model) CISCO SYSTEMS PUBLICATION HISTORY 170 WEST TASMAN DR. SAN JOSE, CA, 95134 REV A.1 MARCH 27, 2013 WWW.CISCO.COM
VPX60 Backplanes. OpenVPX Backplanes 6U VPX60 KEY FEATURES
VPX60 Backplanes VPX60 KEY FEATURES Compliant to latest VITA 65 specifications Various OpenVPX profiles contact Pixus for details 6U backplane design 2, 5, 6, 8, 9, 10, 17 and other slot sizes standard
GEN-3 OpenVPX BACKPLANES
BENEFITS High performance 10 Gen-3 backplanes compatible with 40 Gb Ethernet (40 GBase-KR4), InfiniBand QDR (10 ), Infiniband FDR- 10 (10.3 ), and PCI Express (PCIe) Gen-3 (8 ) on OpenVPX data plane and
AMC GSPS 8-bit ADC, 2 or 4 channel with XCVU190 UltraScale
KEY FEATURES 56 GSPS, 8-bit ADC, UltraScale 8-bit ADC at up to dual 56 GSPS 2 x 56 or 4 x 28 GSPS channels Xilinx UltraScale XCVU190 FPGA 16 GB of DDR-4 Memory (2 banks of 64-bit) ADC is 65 nm CMOS process
VXS-621 FPGA & PowerPC VXS Multiprocessor
VXS-621 FPGA & PowerPC VXS Multiprocessor Xilinx Virtex -5 FPGA for high performance processing On-board PowerPC CPU for standalone operation, communications management and user applications Two PMC/XMC
AMC531 / AMC531C AMC FPGA, Altera EP4S100Gx
KEY FEATURES AMC FPGA, Altera EP4S100Gx FPGA based on the Altera Stratix IV Single module, mid-size per AMC.0 EP4S100Gx in 1517 package Conduction cooled version available Single module, mid-size (full-size
Complete ATCA IPMI Test Suite and Validation or VT027/VT028 Development. FIGURE 1: ATC001 option load for IPMI Test Suite and Validation
ATC001 TM THE POWER OF VISION FIGURE 1: ATC001 option load for IPMI Test Suite and Validation KEY FEATURES Capture and store I 2 C bus data Analyzer mode Exerciser mode Compliance test mode Graphical User
1U MTCA Shelf. User s Manual. Product Number: /025
1U MTCA Shelf User s Manual Product Number: 11850-024/025 Doc-No: 63972-325_D1.0 November 12, 2013 D1.0 November 12, 2013 Draft Release Impressum: Schroff GmbH Langenalber Str. 96-100 75334 Straubenhardt,
GEN-2 / GEN-1 OpenVPX BACKPLANES
BENEFITS GEN-2 / GEN-1 VPX data/expansion plane support for Gen-2, backplanes compatible with: Serial RapidIO (SRIO) Gen-2 InfiniBand DDR PCI Express (PCIe) Gen-2 VPX data/expansion plane support for Gen-1,
LAPP IPMC Mezzanine. LAPP Intelligent Platform Management Controller Mezzanine. Version V1.5. Atlas LAPP 04/11/2013
LAPP IPMC Mezzanine LAPP Intelligent Platform Management Controller Mezzanine Version V1.5 Atlas LAPP 04/11/2013 LAPP IN2P3 CNRS - 9 Chemin de Bellevue - BP110-74941 Annecy-le-Vieux CEDEX - France Table
ATCA-9305 AdvancedTCA Many-core Processor Blade
ATCA-9305 AdvancedTCA Many-core Processor Blade The ATCA-9305 is a 1 and 10 Gigabit processor blade with two many-core Cavium OCTEON 16-core processors Two Cavium OCTEON 16-core CN5860 processors operating
ATC805 ATCA 40GbE Switch with SyncE/IEEE1588 and Dual AMC Slots
ATCA 40G/10G Switch, 2 AMC slots Photo Coming Soon KEY FEATURES 40GbE ATCA switch, compliant to PICMG 3.1 specifications Dedicated GbE switch for the Base Channel SyncE and IEEE1588, managed Layer 3 software
COMPUTING. ATCA G ATCA Server Blade. Data Sheet
COMPUTING Data Sheet An ideal solution for communications equipment requiring powerful server class processing performance, flexible mass srage and network options Two 8-core Intel Xeon processors, E5-2648L,
AMC524 / AMC524C Quad ADC, 125 MSPS, Dual DAC, Artix-7
KEY FEATURES KEY FEATURES Quad ADC, Dual DAC, Artix-7 Photo Coming Soon Quad ADC 16-bit @ 125 MSPS (AD9653) Dual DAC 12-bit @ 2.5 GSPS () Artix-7 FPGA with dual banks of DDR-3, 2 GB total Conduction cooled
High Bandwidth Electronics
DOE BES Neutron & Photon Detectors Workshop, August 1-3, 2012 Ryan Herbst System Overview What are the standard components in a detector system? Detector/Amplifier & ADC Digital front end - Configure and
VPX30 Backplanes. OpenVPX Backplanes 3U VPX30 KEY FEATURES
VPX30 Backplanes VPX30 KEY FEATURES Compliant to latest VITA 65 specifications Various OpenVPX profiles contact Pixus for details 2, 3, 5, 6, 8, 9, 12, and 18 slots standard (contact Pixus for other sizes
INSTITUTO DE PLASMAS E FUSÃO NUCLEAR
ATCA-PTSW-AMC4 Technical Manual INSTITUTO DE PLASMAS E FUSÃO NUCLEAR October 29, 2013 Authored by: M. Correia ATCA-PTSW-AMC4 Technical Manual Document Configuration COMPANY AUTHORS IPFN/IST- instituto
ATCA Release Notes J09D
ATCA-7360 Release Notes 6806800J09D January 2011 Copyright Copyright 2011 Emerson Network Power All rights reserved. Emerson Network Power is registered in the U.S. Patent and Trademark Offices. All other
Pigeon Point ShMM-500R and Shelf Manager Shelf Management Mezzanine & Shelf Manager Core for AdvancedTCA
Pigeon Point ShMM-500R and Shelf Manager Shelf Management Mezzanine & Shelf Manager Core for AdvancedTCA The Pigeon Point ShMM-500R, and the Pigeon Point Shelf Manager that comes pre-loaded on it, are
DCEngine Rack, Compute and Storage System Specification for CG-OpenRack-19 Version 1.0. Author: Matt St Peter, Radisys Corporation
DCEngine Rack, Compute and Storage System Specification for CG-OpenRack-19 Version 1.0 Author: Matt St Peter, Radisys Corporation 1 Revision History Date Name Description 4/11/2017 Radisys Corp Version
SAS Technical Update Connectivity Roadmap and MultiLink SAS Initiative Jay Neer Molex Corporation Marty Czekalski Seagate Technology LLC
SAS Technical Update Connectivity Roadmap and MultiLink SAS Initiative Jay Neer Molex Corporation Marty Czekalski Seagate Technology LLC SAS Connectivity Roadmap Background Connectivity Objectives Converged
6U µtca Desktop Chassis, 6 AMC Full Size, 40GbE VT898
6U µtca Chassis, 6 AMCs KEY FEATURES μtca Desktop (rackmount optional) System Platform 10 x 6U x 10.5 deep Redundant cooling in push/pull front-to-rear airflow configuration Spring-loaded carry handle
ATCA-F140 40G AdvancedTCA Switch Blade
ATCA-F140 40G AdvancedTCA Switch Blade High bandwidth, 40G switch blade design for AdvancedTCA platforms n PICMG 3.0 compliant base interface switch n PICMG 3.1, Option 1, 9 fabric interface switch (1G/10G)
TELCO. Tomi Männikkö/HW Architect, Datacenter R&D/ Nokia
TELCO EDGE SERVER AND CHASSIS Tomi Männikkö/HW Architect, Datacenter R&D/ Nokia Open edge chassis overview Key specifications 3U, 19 mountable (EIA-310 compatible) 130.6 x 440 x 430 mm (H x W x D) 1U and
PICMG 3.4 Revision 1.0 Specification. PCI Express /Advanced Switching for AdvancedTCA Systems
PICMG 3.4 Revision 1.0 Specification PCI Express /Advanced Switching for AdvancedTCA Systems May 21, 2003 Copyright 2003, PCI Industrial Computer Manufacturers Group. The attention of adopters is directed
Exam Questions C
Exam Questions C9010-250 Power Systems with POWER8 Sales Skills V1 1. A credit card company is going to implement a new application for which security is a major requirement. The company has been quoted
Cisco UCS C210 M2 General-Purpose Rack-Mount Server
Cisco UCS C210 M2 General-Purpose Rack-Mount Server Product Overview Cisco UCS C-Series Rack-Mount Servers extend unified computing innovations to an industry-standard form factor to help reduce total
Gen-3 OpenVPX Backplanes
Data Sheet Gen-3 OpenVPX Backplanes This product family is part of the industry-leading Atrenne Computing Solutions product line of high performance chassis and backplanes. Features VITA 65 OpenVPX-compliant
Server System Infrastructure (SM) (SSI) Blade Specification Technical Overview
Server System Infrastructure (SM) (SSI) Blade Specification Technical Overview May 2010 1 About SSI Established in 1998, the Server System Infrastructure (SM) (SSI) Forum is a leading server industry group
EMC SYMMETRIX VMAX 10K
EMC SYMMETRIX VMAX 10K EMC Symmetrix VMAX 10K with the Enginuity operating environment delivers a multi-controller, scale-out architecture with consolidation and efficiency for the enterprise. The VMAX
Density Optimized System Enabling Next-Gen Performance
Product brief High Performance Computing (HPC) and Hyper-Converged Infrastructure (HCI) Intel Server Board S2600BP Product Family Featuring the Intel Xeon Processor Scalable Family Density Optimized System
ATCA-7540-D Data Sheet Bladed server platform with flexible I/O connectivity and ultimate processing performance
COMPUTING Data Sheet Bladed server platform with flexible I/O connectivity and ultimate processing performance Two Intel Xeon Scalable processors (codename Skylake) Scalable performance range/ core count
PCI EXPRESS EXPANSION SYSTEM USER S MANUAL
600-2704 PCI EXPRESS EXPANSION SYSTEM USER S MANUAL The information in this document has been carefully checked and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies.
Delivery Method Chart: Replacement Parts and Installation of Integrated Software Updates
Delivery Method Chart: Replacement Parts and Installation of Table of Contents Overview:... 3 Replacement Parts Delivery Method... 3 Delivery Method... 3 Oracle Desktop and Thin Client... 4 Sun Desktop...